}

Maintenance Repair To Summer Appliances And Other Connected Items Under Age Em I Of Ge North Meerut Cantt, meerut-Uttar Pradesh

Military Engineer Services-MES has published Maintenance Repair To Summer Appliances And Other Connected Items Under Age Em I Of Ge North Meerut Cantt. Submission Date for this Tender is 03-06-2022. Air Conditioner Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

32108676
Corrigendum : Maintenance Repair To Summer Appliances And Other Connected Items Under Age Em I Of Ge North Meerut Cantt
Open Tender
Indian
Uttar Pradesh
meerut
03-06-2022

Tender Details

Maintenance Repair To Summer Appliances And Other Connected Items Under Age Em I Of Ge North Meerut Cantt

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 17-May-2022 BOQ Amendment BOQ 27-05-2022
2 27-May-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 03-06-2022

Key Value

Document Fees
INR 500 /-
EMD
INR 90000.0 /-
Tender Value
INR 45 Lakhs /-

BOQ Items

Name of Work: Maint & repair to Summer Appliances and other Connected items under AGE E/M-I of GE (North) Meerut Cantt
Sl. No. Item Description
1M&L for servicing, repair and replacement ofunserviceable parts at E/M yard including opening offan body, cleaning, separating serviceable parts for reuse / refixsame after repairing andreplacing defecive parts witth new one (new spares followed below shall be measured and paid seperately, minor spares and consumables like screws, washers, grease, cleaning agents, consumables etc. is deemed to be included in the cost ) reassembling, greasing completeall as specified and directed for the following:- (a) Ceiling Fan 1200mm Sweep of any make or model
2All as per Srl item No 01 here-in-before but Ceiling Fan 1400mm Sweep of any make or model
3All as per Srl item No 01 here-in-before butWall / Cabin Fan 400 / 450mm Sweep of any make or model
4All as per Srl item No 01 here-in-before but Exhaust Fan 250/ 300mm Sweep of any make or model
5All as per Srl item No 01 here-in-before but Exhaust Fan 380mm Sweep of any make or model
6All as per Srl item No 01 here-in-before but Exhaust Fan 450mm Sweep of any make or model
7All as per Srl item No 01 here-in-before but Pedestal Fan 400 / 450mm Sweep of any make or model
8All as per Srl item No 01 here-in-before but Air Circulator Fan 600mm Sweep of any make or model
9M & L for rewinding the fans of any make, any model, from a reputed workshop, removing the burnt winding, cleaning slots, re-winding the motor with super enameled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying etc, replacement of body screws, testing and commissioning on full load for 4 hrs continuous running all as directed for the following:- (a) Ceiling Fan 1200mm Sweep of any make or model
10All as per Srl item No 09 here-in-before but Ceiling Fan 1400mm Sweep of any make or model
11All as per Srl item No 09 here-in-before but Wall / Cabin Fan 400 / 450mm Sweep of any make or model
12All as per Srl item No 09 here-in-before bu tExhaust Fan 300mm Sweep of any make or model
13All as per Srl item No 09 here-in-before but Exhaust Fan 380mm Sweep of any make or model
14All as per Srl item No 09 here-in-before but Exhaust Fan 450mm Sweep of any make or model
15All as per Srl item No 09 here-in-before but Pedestal Fan 400 / 450mm Sweep of any make or model
16All as per Srl item No 09 here-in-before but Air Circulator Fan 600mm Sweep of any make or model
17M & L for Preparing the surface, removethe existing painting by scraping, cleaning, filling the cavities and applying 2 coats of spray paint of synthetic enamel white / Brown paint over a coat of red oxide primer, including writing the MES Nos. all as directed for the following:- (a) Ceiling Fan 1200mm Sweep of any make or model
18All as per Srl item No 17 here-in-before but Ceiling Fan 1400mm Sweep of any make or model
19All as per Srl item No 17 here-in-before but Wall / Cabin Fan 400 / 450mm Sweep of any make or model
20All as per Srl item No 17 here-in-before but Exhaust Fan 300mm Sweep of any make or model
21All as per Srl item No 17 here-in-before but Exhaust Fan 380mm Sweep of any make or model
22All as per Srl item No 17 here-in-before but Exhaust Fan 450mm Sweep of any make or model
23All as per Srl item No 17 here-in-before but Pedestal Fan 400 / 450mm Sweep of any make or model
24All as per Srl item No 17 here-in-before but Air Circulator Fan 600mm Sweep of any make or model
25S&F, Condensor / Capacitor, 240V, AC, suitable for fans all as directed for the following:- a)2.5 mfd
26All as per Srl item No 25 here-in-before but3.15 mfd
27All as per Srl item No 25 here-in-before but4.0 mfd
28S&F, Ball bearing made out of high carbon steel, equivalent to the original, 6201/6202/6203/6204/NF-8/6205, suitable for any type, any make, any size fans completeall as specified and directed. Make: SKF / NBC / FAG .
29S&F, GM Bush bearing, equivalent to the original, X-I, X-2, X-3, X-4, suitable for any type, any make, any size, fan completeall as specified and directed
30S&F, Nickel plated mild steel clamps,rubber reel insulator Nuts, Bolts, Washers and split pin suitable for ceiling fansany type, any make, any size completeall as specified and directed
31S&F, Down rod, suitably threaded and holed, made out of 15mmdia GI tubes, duly painted, 300mm long, suitable for ceiling fansany type, any make, any size completeall as specified and directed
32All as per Srl item No 31 here-in-before but600mm long
33All as per Srl item No 31 here-in-before but900mm long
34S&F, Fan canopy with tightening screw/check nut, made out of PVC, suitable for ceiling fansany type, any make, any size completeall as specified and directed
35S&F, Rubber reel insulator, suitable for ceiling fansany type, any make, any size completeall as specified and directed
36S&F, Bakelite body Nichrome connectors, 2 way with fixing screws of suitable size for ceiling fans of any type, any make completeall as specified and directed
37PVC condenser holder /rubber condenser holderwith PVC connector for ceiling/ Exhaust fanscompleteall as specified and directed
38MS nut bolt 50 mm long 8 mm dia for ceiling fanscompleteall as specified and directed
39All as per Srl item No 38 here-in-before but 100 mm long - Ditto -
40MS screw for fixing ceiling fan bladescompleteall as specified and directed
41Clutchfor ceiling fan made out of GI heavy both end threaded as per sample suitable for 1200 /1400 mm sweep ceiling fancompleteall as specified and directed
42Metal bottom cover of ceiling fan complete with bearing holder suitable for any type,any make or model completeall as specified and directed
43All as per Srl item No 42 here-in-before buttop cover of ceiling fans.
44Magnetic ring of ceiling fans for any type,any make or model completeall as specified and directed
45S&F, Fan blades made out of 1.2mm thick Aluminium alloy and MS screws duly balanced & spray painted with White or Brown colour, Set of three, suitable for ceiling fans of any type, any make all as directed for the following:- (a) 1200mm Sweep
46All as per Srl item No 45 here-in-before but 1400mm Sweep
47S&F, Fan blades made out of Acrylic / PVC alloy and MS screws duly balance suitable for 450mm wall / cabin fans of any type, any make, completeall as specified and directed
48S&F, Fan blades made out of thick Aluminium alloy and MS screws duly balanced & spray painted with approved colour, suitable for Exhaust fans of any type, any make all as directed for the following:- (a) 300mm Sweep
49All as per Srl item No 48 here-in-before but380mm Sweep
50All as per Srl item No 48 here-in-before but450mm Sweep
51S&F, Fan blades made out of Acrylic / PVC alloy and MS screws duly balance suitable for 400 / 450mm Pedestal fan of any type, any make, all as directed.
52S&F, Fan blades made out of thick Aluminium alloy and MS screws duly balanced & spray painted with approved colour, suitable for 600mm Air Circulator fan of any type, any make completeall as specified and directed
53S&F, 1100V grade PVC sheathed PVCinsulated flexible 3 core cable with multistranded copper conductor of size 1.5Sqmm, ISI Marked completeall as specified and directed
54Supply & fixing in repair base plate for wall mounting fan any type/ size as per existing size of fan completeall as specified and directed
55Supply & fixing in repair regulator for wall mounting fan any type/ size as per existing size of fan completeall as specified and directed
56Supply & fixing in repair protection cover (jali) complete front and backfor wall mounting fan any type/ size as per existing size of fan completeall as specified and directed
57M&L for making hole in wall, Grouting 4Nos Rag Bolts of size 125mm long x 12mmm dia in PCC on wall including suitable nuts and washers for fixing / hanging geysers, completeall as specified and directed
58S&F PVC sheathed,PVC insulated multi stranded copper conductor, 3 core, flexible cable, 1100 V grade, 2.5Sqmm, AC, connecting completeall as specified and directed
59S&F in repair for plug top 3 pin 15 Amps capacity complete all as specified and directed .
60Supply onlyZebra fastner of size 12x100 mm complete all asspecified and directed .
61S&F in repair modular Power Unit 20A, 3pin, AC, 240V ISI Marked incl FRP Box and 01 No"s 16 Amps MCB SP completeall as specified and directed
62S&F in repair SPN metallic enclosure with a two pin and earth plug and socket with one MCB SP 25 Amps completeall as specified and directed
63S&F in repairs, Wall fan, 450mm sweep, AC,230V incl T/D old u/s one and depositing to MES store complete all as specified and directed.
64S&F in reapirs, PVC fresh air fan, 250mm sweep with louvers, AC, 230V incl T/D old u/s one and depositing to MES complete all as specified and directed.
65AlAll as per Srl item No 64 here-in-before but 200mm sweep
66M&L for making opening in the wall for fixing exhaust fan upto 250mm /200mm, including plastering work & making good the surfaces completeall as specified and directed
67Window Type AC / Split AC :-Disconnection of suction and discharge line connection of sealed unit and taking out the defective sealed unit compressor from window type AC/Split AC of any make any type / any model replacing the defective compressor with any repaired one from any of the authorised workshop//manufacture of Make : Kirloskar/Tecumsch/Carrier refixing the compressor in the original position of window/split type AC making all existing connectionfor 1.5 ton Air conditioner incl OLP / Relay. completeall as specified and directed
68S&F in replacement of new compressor hermetically sealed type equipped with suitable rated capacity electric motor and over load protection making all existing connection complete all as directed for 1.5 ton Window type/split Air conditioners.Make : Kirloskar/Tecumsch completeall as specified and directed
69All as per Srl item No 68 here-in-before but of capacity 2 ton.
70All as per Srl item No 68 here-in-before butInvertor type of capacity 1.5 ton
71M&L for Gas refrigerant R12/R22/R410A/R 134 in the sealed system of window/Split type Air conditioners 1.5/2 Ton capacity after checking leakage / pressure vacumising flushing the sealed unit including replacement of filter drier and capillary tube completeall as specified and directed
72Taking down of window/Split AC 1.5/2.0 any /any modelton capacity and cleaning / serving of AC, overhauling of blower motor replacement of worn out parts, preparation of body for painting one coat of black paint inner side and one coat synthatic enameled paint on the outer cover of AC and making of SM/MES No and testing of full load of summer season and reinstallation at site. Note : Worn out parts shall be measured & paid seperately. completeall as specified and directed
73S&F in repairsplit / window AC of capacity 1.5 / 2 TR (a) Blower motor 1/6 HP with base / rubber bush complete Make AUE / GE Suitable for any make / model completeall as specified and directed
74All as per Srl item No 73 here-in-before butCondensor fan motor 1/5 HP Make : AUE/GE
75All as per Srl item No 73 here-in-before butCondensor fan metallic blade.
76All as per Srl item No 73 here-in-before butDrum type blower fan PVC type.
77All as per Srl item No 73 here-in-before but Running capacitor 36 mfd make EPCOS/Havells/TESLA.
78All as per Srl item No 73 here-in-before butStarting capacitor 100 to 120 mfd make : EPCOS/Havells/TESLA.
79All as per Srl item No 73 here-in-before but Selector switch. Any make / any model
80All as per Srl item No 73 here-in-before butThermostate make : Indfoss / EPCOS
81All as per Srl item No 73 here-in-before but with plastic / juite Air filter.
82All as per Srl item No 73 here-in-before butcooling coil assembly suitable for any make / any model as per site requirement
83All as per Srl item No 73 here-in-before butCondensor coil assembly.
84All as per Srl item No 73 here-in-before butWiring kit.
85All as per Srl item No 73 here-in-before butFront grill plastic type as per sample
86All as per Srl item No 73 here-in-before butCapacitor 6 mfd Make : EPCOS/Havells/TESLA.
87All as per Srl item No 73 here-in-before butBlower motor 1/3 HP for indoor unit split type AC suitable for any Make / any model as per site requirement.
88All as per Srl item No 73 here-in-before butRunning capacitor 45 mfd Make : EPCOS/Havells/TESLA.
89All as per Srl item No 73 here-in-before butBlower fan 3 Ft long suitable for split AC USHA SHRIRAM/LG (as per sample)
90All as per Srl item No 73 here-in-before but Copper wire 3 core 4 sqmm
91Supply and fix in replacement of electronic circuit plate (PCB) including necessary repairs to electronic circuit for remote operation suitable for 1.5 / 2.0 ton split type AC for LG / USHA / SRIRAM. completeall as specified and directed
92Supply and fix in replacement of remote suitable for 1.5 / 2 ton split type AC operation for LG/Usha Sriram completeall as specified and directed
93Supply and fix in replacement Air break contactor relay 6.2 Amps, 415 Volts AC suitable for split type AC. Make:SIEMENS/L&T completeall as specified and directed
94Labour for shifting of split AC 1.5 , 2 ton capacitor one place to another places as required at site and disconnecting of copper tubing, PVC pipe connection and installation of New location indoor/outdoor unit complete with Gas charging tested on full load on summer season. completeall as specified and directed
95M&L for replacement with new indoor unit of capacity 1.5 / 2 ton with cooling coil, blower motor complete with all accessories Make : LG/Voltas / Samsung as per site requirement completeall as specified and directed
96M&L for replacement with new outdoorunit of capacity 1.5 / 2 ton with condensor coil, blower motor 1/6 HP , single phase, including fixing in old serviceable compressor and connection of copper tubing suction / discharge all as specified and directed complete. Make : LG/Voltas / Samsung as per site requirement. completeall as specified and directed
97REFRIGERATOR : Disconnection of unserviceable compressor from suction discharge line and taking out compressor from refrigerator of capacity 300 to 320 ltrs any make and replace the defective compressor with a repaired compressor from anyof the authorised repair workshop / manufacture Make : Godraj / Techmsch with OLP / relay of making all existing connection complete all as directed. completeall as specified and directed
98All as per Srl item No 97 here-in-before but165 to 210 ltrs.
99S&F in replacement of new compressor hermetically sealed type type compressor suitable for 300 to 320 ltrs capacity refrigerator with suitable rated capacity electric motor and shall be equipped with relay / over load protection 230 Volt, 50 Hz, single phase suitable for any make or model. completeall as specified and directed
100All as per Srl item No 99 here-in-before but 300 ltrs
101All as per Srl item No 99 here-in-before but165 ltrs to 260 ltrs.
102M&L for filling/charging Gas refrigerant R22/R134/R438Ain the sealed system of refrigerator of any make /capacity after checking leakage / pressure vacumising flushing the sealed unit including replacement of filter drier and capillary tube completeall as specified and directed
103S&F starting relay with OLP kit suitable for any make Suitable for any / model refrigerator complete with testing and commissioning completeall as specified and directed
104Supply and fix in replacement of thermostat switch suitable for any model / model completeall as specified and directed
105S&F electricLamp 15 watt 230 volt AC thread / pin type suitable for any make / capacity of refrigerator, make : Philips/Bajaj completeall as specified and directed
106M&L for replacement of lamp holder suitable for any make/capacity model of refrigerator completeall as specified and directed
107M&L for replacement of door switch push type suitable for any make/capacity model of refrigerator completeall as specified and directed
108S&F Door handle suitable for Refrigerator any make / model / any cap of any completeall as specified and directed
109S&F PVC bottle guard suitable for 165 to 310 ltr Refrigerator suitable for any make /model/any capacity completeall as specified and directed
110S&F in replacement of condensing coil suitable for any make / model / refrigerator for the following capacity ( As per Sample ) :- (a) 300 / 310 ltrs
111All as per Srl item No 110 here-in-before but165 ltrs to 210 ltrs.
112S&F in replacement chilled tray plastic for suitable for any make / any model / any capacity refrigerator completeall as specified and directed
113S&F in replacement of PVC gaskit magnetic type for suitable for any make / any model / any capacity refrigerator completeall as specified and directed
114S&F in replacement of cooling fan motor with metallic blade for any cap / any type completeall as specified and directed
115S&F Ice cube tray plastic complete all as specified and directed.
116S&F vegetable tray plastic suitable for any make/any model/any capacity completeall as specified and directed
117S&F toughened glass partition for any cap / any make / any model completeall as specified and directed
118S&F timer switch for suitable for any make / any model /any size completeall as specified and directed
119M&L for painting to refrigerator 310/300/316/165 ltrs by scraping the old paint and applying one coat of red oxide as primer and applying two coats of synthatic enamel paint of approved colour including writing SM No completeall as specified and directed
120WATER COOLER : Disconnection of the compressor from suction and discharge line and taking out the sealed unit compressor from water cooler of any make , replacing the defective compressor with repaired compressor from any of the authorised repair workshop / manufacturer refixing the repaired compressor in the original position of the water cooler making all existing connection for following capacities :- (a) 40/80 , 60/120 ltrs capacity
121All as per Srl item No 120 here-in-before but150 ltrs
122S&F in replacement of new compressor hermetically sealed type with suitable rated capacity electric motor and shall be equipped with over load and relay, 230Volt, 50 Hz, single phase and confirming to IS-10617, suitable for water cooler 40/80 ltr capacity.Make: KIRLOSKAR/TECHUMSH/EMERSON COPLAND completeall as specified and directed
123All as per Srl item No 122 here-in-before but60/120 ltr capacity.
124All as per Srl item No 122 here-in-before but150 ltr capacity.
125M&L cleaning of water cooler tank from inner side with soda / Acid and de-scaling of water cooler to remove by brushing and soldering the leaking places and prepare the leak proof and completeall as specified and directed
126M&L for painting to water cooler of any capacity by applying two coats of synthetic enamel paint over a coat of red oxide primer of approved colour by spray machine after preparation of old surface and writing machine No with black paint completeall as specified and directed
127Dismantling the blower motor of water cooler 1/32 HP capacity, 230 volts single phase and taking out burnt out copper winding wire from motor and M&L for rewinding the electric motor with super enameled copper winding wire of same size and gauge including insulation material, varnish and bush, shaft and refixing the motor complete & testing on full load including replacement of unserviceable spares completeall as specified and directed
128All as per Srl item No 127 here-in-before but1/6HP for 150 ltr water cooler / AC
129S&F in replacement of starting relay No. 522 / 1622 for water cooler Make : Tesla /Havells/EPCOS completeall as specified and directed
130S&F in replacement of starting capacitor 40-60 mfd 220 Volts.Make : Tesla /Havells/EPCOS completeall as specified and directed
131All as per Srl item No 130 here-in-before butfor capacitor 60-80 mfd 220 Volts.Make : Tesla /Havells/EPCOS
132All as per Srl item No 130 here-in-before butfor Running capacitor 15 mfd, 415 volts .Make : Tesla /Havells/EPCOS
133All as per Srl item No 130 here-in-before butforcapacitor 10 mfd, 415 volts .Make : Tesla /Havells/EPCOS
134All as per Srl item No 130 here-in-before butforcapacitor 36 mfd, 415 volts .Make : Tesla /Havells/EPCOS
135S&F in replacement of PVC float valve with rod and plastic ball suitable for 1/2" bore of water cooler. Make : Prayag / Pearl completeall as specified and directed
136S&F in replacement of LDPE 25 mm dia flexible pipe heavy duty with suitable clamp completeall as specified and directed
137S&F PVC pipe flexible type 32 mm dia for waste water draining completeall as specified and directed
138S&F in replacementover load protector (OLP) for water cooler of any capacity completeall as specified and directed
139S&F in replacement self closing push cock 15mm bore chromium plated brass heavy duty long body inner threaded completeall as specified and directed
140S&F in replacement aluminium blade for blower motor of water cooler 80 ltrs to 150 ltrs completeall as specified and directed
141S&F in replacementopen type relay : CAJ-2612 complete all as specified and directed
142All as per Srl item No 141 here-in-before butCAJ-3612
143S&F in replacementthermostat of water cooler of any type make INDFOSS completeall as specified and directed
144S&F in replacementblower motor 1/32 HP 230 volt suitable for water cooler complete with base frame/and rubber bush make AUE/GE for 60 to 150 ltrs completeall as specified and directed
145Repair & rewinding blower motor 1/32 HP 230 volt suitable for water cooler for 60 to 150 ltrs water cooler and refixing the same position completeall as specified and directed
146S&F in replacementdrip tray made of stainless steel complete suitable for water cooler any make of 40 to 150 ltr capacity completeall as specified and directed
147Supply and fix water tank gasket for water cooler 40/80 ltr cap completeall as specified and directed
148S&F wiring kit complete for water cooler completeall as specified and directed
149DEEP FREEZER : Disconnection of the compressor from suction and discharge line and taking out the sealed unit compressor from Deep freezer of any make , replacing the defective compressor with repaired compressor from any of the authorised repair workshop / manufacturer refixing the repaired compressor in the original position of the Deep freezer making all existing connection for following capacities ;- (a) 200 / 300 Ltrs
150All as per Srl item No 149 here-in-before but 400 / 500ltrs capacity.
151Supply and fix in replacement of new compressor hermetically sealed with suitable rated capacity electric motor and shall be equipped with over load and relay, 230 volt , 50 Hz , single phase and confirming to IS-10617 , suitable for Deep freezer of capacity 200 / 300 Ltrs. Make : KIRLOSKAR/TECHUMSH/EMERSON COPLAND.
152All as per Srl item No 151 here-in-before but400 / 500ltrs capacity.
153M&L for Filling gas refrigerent R12/R22/R-404A in the sealed system of Deep Freezer any make and capacity after checking the leakage / pressure vacuminising flushing the sealed system including replacement of capacity Tube, copper pipe for jointing, Gas filter completeall as specified and directed
154Supply & Fixing Voltage Stabilizer for 2 Ton AC Make : V-Guard VG 500 or equivalent in Microtek completeall as specified and directed
155Supply & Fixing Voltage Stabilizer for 1.5 Ton AC Make : V-Guard VG 400 or equivalent in Microtekcompleteall as specified and directed
156S&F in replacement starting relay as per sample completeall as specified and directed
157S&F in replacement of main transformer 5 KVA capacity completeall as specified and directed
158All as per Srl item No 157 here-in-before but2 / 3 / 4 KVA
159All as per Srl item No 157 here-in-before but0.5 / 1KVA
160WATER PURIFIER : Taking out of water purifier (Aqua guard) or any other make / modeland servicing , repair / over hauling of water puriferinstalled at cantt area for maintenance. (Spare parts will be measure and paid separetelly relevant items) completeall as specified and directed
161S&F in replacement of pre filter candle (as per sample) completeall as specified and directed
162S&F in replacement of Activated Carbon completeall as specified and directed
163S&F in replacement of PCB circuit electric plate completeall as specified and directed
164S&F in replacementultra violet lamp unit completeall as specified and directed
165S&F in replacement of PVC pipe nylon braided heavy duty suitable for water partition inletconnection and as required at site completeall as specified and directed
166S&F in replacement of chromomum plate tee 15/8 mm for existing GI pipe connection completeall as specified and directed
167DESERT COOLER: Servicing / Disconnection desert cooler of kit fan from desert cooler for repairing including cleaning,greasing,oiling , welding or M"seal at leaking place and refixing back after repair in original position including replacement of unserviceable spares. ( parts to be replaced will be measured and paid separately under elevant items) completeall as specified and directed
168S&F in repair desert cooler fan motor any type/any model/make completeall as specified and directed
169S&F in replacement of capacitor 4 mfd for kit fan / Exhaust fan completeall as specified and directed
170S&F in replacement of PVC water distributer 3 way / 4 way for desert cooler of any size / capacity completeall as specified and directed
171S&F in replacement of PVC elbow suitable for desert cooler of any size / capacity completeall as specified and directed
172S&F in replacement of PVC flexible pipe 15 mm dia suitable for water distribution system of Desert cooler of any size / capacity completeall as specified and directed
173S&F in replacement of front grill plastic type desert cooler with necessary nut,bolts, and washers etc, all as directed. Make : conark completeall as specified and directed
174S&F in replacement of Vertical lifting pumps 1/70 HP, 230 Volts single phase. Make : CG / Bajaj completeall as specified and directed
175S&F in replacement of Sumersible pump suitable for desert cooler complete upto 4000 cumMake : CG / Bajaj completeall as specified and directed
176S&F in replacement of wood wool padding of desert cooler of suitable size in wire net complete weight not less than 450 gms completeall as specified and directed
177S&F in replacement of wood wool padding of Industrial desert cooler of suitable size in wire net complete weight not less than 450 gms. completeall as specified and directed
178S&F in replacement side shutter (set of three) for desert cooler of as per sample 22 gauge PGI sheets grill type completeall as specified and directed
179Supply &installnewdesert cooler 4000 cum per hour,electric driven, 1 phase, 240 volts, AC heavy duty long body exhaust fan motor with , submersible water pump, ISI marked 3 core 1.50 sqmm pvc copper cable of minium 2 mtr long with plug top and control switches etc completeall as specified and directed
180Supply and fix fan motor copper wounded suitable for desert cooler 230 volts, 50 Hz, single phase AC supply four speed 180 watts of 450 mm sweep complete with fan blade and legs, 4000 Cum complete. Make : CG/Bajaj/Havells completeall as specified and directed
181Supply and fix fan motor copper wounded suitable for Industrial desert cooler 230 volts, 50 Hz, single phase AC supply four speed 180 watts of 450 mm sweep complete with fan blade and legs 6000 Cum completeall as specified and directed Make : CG/Bajaj/Havells
182S&F in replacement of Mettalic fan blade for desert cooler motor 4000 Cum completeall as specified and directed
183S&F in replacement of Mettalic fan blade for Industrial desert cooler motor 6000 Cum completeall as specified and directed
184S&F in replacement of 3 pin plug top 5 Amps. Make : Anchor / Kinjal completeall as specified and directed
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail