|
| 1 | Civil work: |
| 2 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit concealed in wall with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit GP Box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect as per direction of E/I. (PWD 131-C) |
| 3 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit on surface with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit GP Box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect as per direction of E/I. (PWD 121-C) |
| 4 | Wiring point for light with 1.5 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in existing Concealed PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit GP Box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect as per direction of E/I. (PWD 174-C) |
| 5 | Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge. (PWD 148-A) |
| 6 | Wiring point for fan /fresh air fan (light duty exhaust fan)with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cablein PVC conduit on surface with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect as per direction of E/I. (PWD 123-C) |
| 7 | Wiring point for ceiling fan with 1.5 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in existing Concealed PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit GP Box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect as per direction of E/I. (PWD C.S.I. No. 177-C) |
| 8 | Wiring point for exhaust fan with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit on surface with 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit 15A piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect as per direction of E/I. (PWD C.S.I. No. 127-C) |
| 9 | Wiring point for plug with 1 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduiton surface with 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect as per direction of E/I. (PWD 124-C) |
| 10 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. (PWD 1139) |
| 11 | S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve. (PWD 1002-B) |
| 12 | S&F of 40 Amp. DP MCB (10 KA) C Curve. (PWD 1010-B) |
| 13 | S&F of 63 Amp. 4 pole MCB(10 KA) C Curve. (PWD 1020-A, CAT-B) |
| 14 | S&F of 80 to 100 Amp 4 pole MCCB (16 KA) Thermal Magnetic release. (PWD 1021) |
| 15 | S/F of enery saving electronic ballast for 20/40 watt fluorescent tube with RFI and EMI filter suitable for operation on 230 V AC supply including making all connections, all the required matrial, labour T&P proper completion of the work. (PWD 1201) |
| 16 | S/R of 40 watts tube light starter of standard quality including cost of all labour material, T&P etc. required for proper completion of the work. UPPCL 22.50) |
| 17 | S/R of 40 watts 4’ long tube light Silvania Laxman / Bajaj or equivalent make as per ISI including cost of all labour material, T&P etc. required for proper completion of the work. (UPPCL 22.47) |
| 18 | Supply & fixing of LED Tube light fitting 18watt -4Ft. of Crompton or equivalent make including labour T&P etc. (NSI) |
| 19 | S/R tube light holder of heavy quality including cost of all labour material, T&P etc. required for proper completion of the work. (UPPCL 22.49) |
| 20 | Supply & fixing of LED Bulb of 9 watt of Crompton or equivalent make including labour T&P etc. (NSI) |
| 21 | Supply & fixing of LED Bulb of 20to 25 watt of Crompton or equivalent make including labour T&P etc. (NSI) |
| 22 | Supply & fixing ceiling fan of high speed 48” of Crompton or equivalent make including labour & TP etc. (NSI) |
| 23 | Supply & fixing of LED false ceiling light of 12 watt of Crompton or equivalent make including labour & TP etc. (NSI) |
| 24 | Supply & Fixing Chord less call bell of approved quality as per direction of Engineer in charge. (N.S.I.) |
| 25 | Supply & fixing wall fan of high flow wave 400mm of Crompton or equivalent make including labour & TP etc. (NSI) |
| 26 | S/R of 250 watt sodium choke including cost of all labour material, T&P etc. required for proper completion of the work. (UPPCL 22.67) |
| 27 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia PVC conduit on surface, with one number 2.5 sq. mm. multistrand copper drawn in conduit complete in all respect. (PWD 211-C) |
| 28 | Supply and wiring of submain with two number 6 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 25 mm dia PVC conduit on surface, with one number 2.5 sq. mm. multistrand copper drawn in conduit complete in all respect. (PWD 212-C) |
| 29 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in existing PVC conduit on surface, with one number 2.5 sq. mm. multistrand copper drawn in conduit complete in all respect. (PWD C.S.I. No. 291-A) |
| 30 | S&F of 32 Amp. double pole change over switch on 25mm x 25mm x 3mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. (PWD 374) |
| 31 | S&F of 32 Amp. four pole change over switch on 25mm x 25mm x 3mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. (PWD 376) |
| 32 | S&F of 100 Amp. four pole change over switch on 40mm x 40mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. (PWD 378) |
| 33 | S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. (PWD 379) |
| 34 | S&F of 16 Amp. 240 V SPN metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respect. (PWD 301) |
| 35 | S&F of 32 Amp. 240 V SPN metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respects. (PWD 302) |
| 36 | S/F of 32 Amp ,415 volt metal clad T,P,rewireable type switch fuse unit on angle iron bracket complete in all respect. (PWD 321) |
| 37 | S&F of 63 Amp. 415 V metal clad TP HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect. (PWD 323) |
| 38 | S&F of 100 Amp. 415 V metal clad TP HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect. (PWD 324) |
| 39 | S/R of thermostat of geyser 1500 watts 250 volt including taking out damage thermostat and refitting and testing including cost of all labour material, T&P etc. required for proper completion of the work.(UPPCL 22.64) |
| 40 | S/R of elementof geyser 1500 watts 250 volt including taking out damage element and refitting and testing including cost of all labour material, T&P etc. required for proper completion of the work. (UPPCL 22.65) |
| 41 | S/R of regulator for ceiling fan of GEC or equivalent make including cost of all labour material, T&P etc. required for proper completion of the work. (UPPCL 22.60b) |
| 42 | S/R of sodium lamp of approved quality and sample including cost of all labour material, T&P etc. required for proper completion of the work. (UPPCL 22.66) |
| 43 | (a) 250 watts |
| 44 | (b) 75 watts |
| 45 | Supply and fixing of LED street light fitting having dia cast aluminum body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 production complete in all respect. (PWD C.S.I. No. 1424) |
| 46 | Supply and fixing of LED street light fitting having dia cast aluminum body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 production complete in all respect. (PWD C.S.I. No. 1423) |
| 47 | Supply and fixing ignator for 250 watt, Sodium Iamp including cost of all labour material, T&P etc. required for proper completion of work. (revd. Rate shc. 27.41) |
| 48 | S/R socket 2/3 pin 6 Amp 250 volt of SSK or equivalent make of approved quality including cost of all labour material, T&P etc. required for proper completion of the work. (UPPCL 22.53) |
| 49 | A. Without frame |
| 50 | S/R of Piano type switch 16 Amp 250 volt of SSK or equivalent make of approved quality including cost of all labour material, T&P etc. required for proper completion of the work. (UPPCL 22.55) |
| 51 | (a) Without frame |
| 52 | S/R switch socket combined 2/3 pin 16 Amp 250 volt of SSK or equivalent make of approved quality including cost of all labour material, T&P etc. required for proper completion of the work. (UPPCL 22.56) |
| 53 | (a) Without frame |
| 54 | Disconnecting and taking off the defective hanging ceiling fan& re-hanging after checking the repaired fan making proper connection etc. including cost of all materials, labour and T&P etc. required for proper completion of work. (UPPCL 22.58) |
| 55 | Disconnecting and re-wiring of burnt motor with copper wire of approved quality,size and reconnection and re-fixing including cost of all labour material, T&P etc. required for proper completion of the work. (Burnt copper wire is adjusted in given rate and shall be the property of contractor). (UPPCL 22.94) |
| 56 | (b) Exhaust fan |
| 57 | Rewinding of burnt ceiling fan with approved copper wire including cost of all materials, labourand T&P etc. complete (Burnt wire will not be taken back.) (UPPCL C.S.I. No. 22.102) |
| 58 | S/R of burnt damaged condenser of approved quality including cost of all labour material, T&P etc. required for proper completion of the work. (UPPCL 22.61) |
| 59 | (a) 2.5 M.Fd |
| 60 | (b) 4.5 M.Fd |
| 61 | Supply and fixing of switch box made up of 1 mm thick G.P. sheet of 100 x 100 x 50 mm size in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. (PWD 159) |
| 62 | Same as above in item no. (51) but of 150 x 150 x 65 mm size (PWD 160) |
| 63 | Same as above in item no. (51) but of 1size 175 x 100 x 65 mm size. (PWD 161) |
| 64 | Same as above in item no. (51) but of size 200 x 250 x 65 mm size(PWD 162) |
| 65 | Same as above in item no. (51) but of 250 x 250 x 65 mm size(PWD 163) |
| 66 | Same as above in item no. (51) but of size 250 x 300 x 65 mm size(PWD 164) |
| 67 | Same as above in item no. (51) but of size 300 x 375 x 65 mm size (PWD 165) |
| 68 | Same as above in item no. (51) but of size 300 x 450 x 65 mm size (PWD 166) |
| 69 | P/f twin core aluminum cable 8.00m Sq. mm. complete. (revd. NSI apprd.) |
| 70 | S/R of ISI mark rewirable switch porciline fuse unit(cut out ) of SSK or equivalent make includingremoving of old unit and reconnectionincluding cost of all labour material, T&P etc. required for proper completion of the work. (UPPCL 22.93) |
| 71 | (A) 100 Amp 415 volt |
| 72 | (B) 63 Amp 415 volt |
| 73 | (C) 32 Amp 415 volt |
| 74 | Supply & fixing fresh air fan of 200mm of Crompton or equivalent make including labour & TP etc. (NSI) |
| 75 | Attending to petty maintenance service like plumbing service, welder service, mason service and carpenter service required as below. (UPPCL 22.109) |
| 76 | (a) Job attending by one no. Plumber/welder/mason/ carpenter with one no. helper per hour or part of an hour. |
| 77 | (b) Job attending by one no. Plumber/welder/mason/ carpenter with two no. helper per hour or part of an hour. |
