Rate Contract For Supply Of Consumables And Non Consumables Rate Contract For Supply Of Consumables And Non Consumables For The Department Of Transfusion Medicine , Consumables: Specifications For All Below Antiseras And Bovine Albumin: 1. All Antiseras

Sharing tender

Rate Contract For Supply Of Consumables And Non Consumables Rate Contract For Supply Of Consumables And Non Consumables For The Department Of Transfusion Medicine , Consumables: Specifications For All Below Antiseras And Bovine Albumin: 1. All Antiseras Should Meet Minimum Quality Control Specifications As Per Transfusion Medicine Technical Manual, 2Nd Edition, Pg.No: 346-351; Director General Health Services, Ministry Of Health And Family Welfare, Govt. Of India Publication 2. The Manufacturers Should Have Supplied All Above Mentioned Antiseras And Bovine Albumin Continuously And Satisfactorily To Government Blood Banks For A Period Of 5 Years. List Of Such Government Blood Banks Should Be Enclosed. A Satisfactory Quality And Supply Certificate From Any Of The Two Government Blood Banks Should Be Enclosed For Preceeding 3 Years. 3. The Quantity Quoted May Be Increased Or Decreased Without Assigning Any Reasons. , Anti-A Grouping Sera Igm ( Monoclonal ) * ( 10 Ml Vials ) , Anti-B Grouping Sera Igm ( Monoclonal ) * ( 10 Ml Vials ) , Anti-Ab Grouping Sera Igm ( Monoclonal ) * ( 10 Ml Vials ) , Anti-D Grouping Sera Igm ( Monoclonal ) * ( 10 Ml Vials ) , Anti-A1 ( Lectin ) * ( 5 Ml Vials ) , Anti-D Igm + Igg Grouping Sera ( Monoclonal ) * ( 10 Ml Vials ) , Anti-D Igg Grouping Sera ( Monoclonal ) * ( 10 Ml Vials ) , Anti -D Igg Grouping Sera ( Polyclonal ) * ( 5 Ml Vials ) , Anti -H ( Lectin ) * ( 5 Ml Vials ) , Bovine Albumin 22%* ( 5 Ml Vials ) , Anti Human Globulin Sera Igg+C3d ( Polyspecifc ) * ( 5 Ml Vials ) , Anti Human Globulin Sera Igg ( Monospecific ) * ( 10 Ml Vials ) , Anti Human Globulin Sera C3d ( Monospecific ) * ( 10 Ml Vials ) , Instant Abd Blood Grouping Pad / Cards / Strips For Voluntary Blood Donation Camps. ( Ready To Use For Blood Grouping Anti-A, Anti-B And Anti-D Igm ) * Specifications: 1. The Above Pad / Cards / Strips Should Be Approved By Statutory Authority Like Drug Control General Of India / National Inst. Of Biologicals. 2. The Pad / Cards / Stripes Should Contain Wells With Precoated Monoclonal Antisera With Color Coading And Suitable Medium / Matrix To Immobilize Agglutinated Red Cells So As Results Are Read Witin 30-45 Seconds 3. The Pad / Cards / Strips Can Be Used At An Ambient Temperature Of 20-40Deg C. 4. It Should Compatible With All Types Of Blood Samples, Namely Whole Blood, Heparin, Finger Prick, Blood Bag Segments Etc., 5. It Should Easily Readable For 24 Hours After Testing, Fully Traceable By Photography / Other Media. 6. Should Be Able To Detect Weak Abd Antigens 7. Necessary Dispensing Micro Pipettes / Pasteur Pipettes And Tips Should Be Provided Along With The Kits. 8. Necessary Buffers And Other Consumables Should Be Provided In Enough Quantity Including Wastage If Any For Complete Usage Of All Cards / Pads / Stripes Along With The Kits. 9. The Bidder / Supplier Should Provide Satisfactory Certificates From 3 Blood Banks Which Are Already Using Such Pads / Stripes / Cards. 10. Product Should Be Ce Marked 11. Expiry After Opening Minimum 14 Days , Copper Sulphate Cuso 4.5H2o - Ar Grade* ( 500 Gms Per Pack ) , Polygrid Test Tube Stand ( For 12 X 100Mm ) , Stands For Blood Grouping Antisera , Round Adhesive Wound Plaster - Disposable* ( 100 Nos. Per Pack ) , Round Blood Lancets - Disposable And Sterile* ( 100 Nos. Per Pack ) , Aluminium Rings For Tube Sealing* ( 100 Nos Per Pack ) , Disposable Pasteur Pipettes 1 Ml. ( 500 Nos. Per Pack ) , Disposable Pasteur Pipettes 3 Ml. ( 500 Nos. Per Pack ) , Disposable Pasteur Pipettes 10 Ml. ( 500 Nos. Per Pack ) , Blotting Paper ( White Ordinary ) 60 X 60 Cm* ( 500 Nos. Per Pack ) , Cryo Gloves - Water Proof, Mid Arm, Size-Medium , Tissue Roll* , K3 Edta- Non Vacuum Tubes 2 Ml* ( 100 Nos. Per Pack ) , Microtip Boxes 2-200 ?L -Autoclavable , Microtip Boxes 200-1000 ?L -Autoclavable , Acrylic Beakers - 50 Ml , Acrylic Beakers - 100 Ml , Acrylic Beakers - 250 Ml , Acrylic Beakers - 500 Ml , Conical Flask - 50 Ml , Conical Flask - 100 Ml , Conical Flask - 250 Ml , Conical Flask - 500 Ml , Conical Flask - 1000 Ml , Thermal Paper For Elisa Reader 110 X 20 ( 11 Cms Width ) * , Pipette Stand ( For 6 Pipettes ) , Reagent Bottle Stand , Blood Bag Storage Racks , Teepol Liquid Cleaner* ( 10 Litres Per Bottle ) , Sodium Hypochlorite Solution 4%* ( 5 Litres Per Bottle ) , Isopropyl Alcohol ( 500 Mlper Bottle ) , Drabkins Reagent For Haemoglobin Estimation* ( 5 Litres Per Bottle ) , Electronic Thermometer ( Wettable ) , Surface Temperature Measuring Thermometer , Magnetic Stirrer Bar , Specific Gravity Meter , Nageottes Chamber , Volumetric Flask - ( 500 Ml Per Bottle ) , Concave Lens - For Reading Agglutinin , Mortar & Pestle , Capillary Tubes ( 100 Nos. Per Pack ) , Ulex Europeus For Lectin Preparation ( 1 Mg ) , Dolichos Biflorus For Lectin Preparation ( 5 Mg ) , Arachis Hypogea For Lectin Preparation ( 1 Mg ) , Thrombin From Bovine Plasma - Lyophilized Powder ( 1 Ku ) , Glassbeads ( 500 Gms.Per Bottle ) , Protamine Sulfate Reagent ( 5 Gms. ) , Epsilon Amino Caproic Acid-Reagent Grade ( 1 Gm ) , Sodium Dihydrogen Phosphate-Reagent Grade ( 500 Gms.Per Bottle ) , Disodium Hydrogen Phosphate -Reagent Grade ( 500 Gms.Per Bottle ) , Bovine Albumin 6%-Reagent Grade ( 100 Ml Per Bottle ) , Papain Powder-Reagent Grade ( 100 Gms.Per Bottle ) , Ficin Powder-Reagent Grade ( 100 Gms.Per Bottle ) , Phosphate Buffer Saline - Ph 7.4 ( 100 Ml Per Bottle ) , Dithiothreitol ( Dtt ) ( 5 Gms.Per Bottle ) , Glycine-Reagent Grade ( 500 Gms.Per Bottle ) , 2- Mercaptoethanol-Reagent Grade ( 100 Ml Per Bottle ) , Chloroquine-Disphosphate-Reagent Grade ( 25 Gms.Per Bottle ) , Wax Sealant ( 500 Gms.Per Bottle ) , 3350 Mw Polythelene Glycol ( 500 Gms.Per Bottle ) , L-Cysteine-Reagent Grade ( 25 Gms.Per Bottle ) , Nacl ( Lr ) ( 500 Gms.Per Bottle ) , Disodium Edta ( 500 Gms.Per Bottle ) , Tris ( Tris Hydroxymethyl ) Aminomethane ( 25 Gms.Per Bottle ) , Sodium Barbital-Reagent Grade ( 25 Gms.Per Bottle ) , Ethyl Alcohol-Reagent Grade ( 500 Ml Per Bottle ) , Erythrosin-Reagent Grade ( 25 Gms.Per Bottle ) , Harris Haematoxylin Solution ( 500 Ml Per Bottle ) , Glycerol Lactate ( 500 Ml Per Bottle ) , Turks Solution ( 250 Ml Per Bottle ) , Ph Strips 0.0-6.0 Ph, Resolution: 0.5 Ph Unit ( 50 Strips ) , Ph Strips 6.0-7.7 Ph, Resolution: 0.3-0.4 Ph Unit ( 50 Strips ) , Ph Strips 7.0-14.0 Ph, Resolution: 0.5 Ph Unit ( 50 Strips ) , Ph Buffer Capsules ( 3 Standard Buffers- Ph 4, Ph 7 & Ph 10 ) -2 Each , Microtitre Plate U Bottom - 96 Wells ( 50 Platesper Pack ) , Test Tubes With Rim ( 12X100 Mm ) ( 100 Nos. Per Pack ) , Test Tubes With Rim ( 12X75 Mm ) ( 100 Nos. Per Pack ) , Capillary Microhematocrit Tubes ( 2.9 ) ( 200 Nos. Per Pack ) Specification: 1. Size: Length: 75 Mm, Innder Diameter: 1.2 Mm, Wall: 0.2 Mm 2. Capacity: 70 Ul 3. Ends Can Be Sealed With Sealing Clay 4. Interior Surface Of Heparinized Tubes Is Evenly Coated With Ammonium Heparin Which Will Not Interfere With Sodium Determination , Sterile Conical Tubes ( 100 Nos. Per Pack ) Specification: 1. Capacity: 15 Ml 2. Length: 120 Mm 3. Width: 17 Mm 4. Material: Polypropelene 5. Dome Top 6. Rcf: 12000 Rpm 7. Storage: -80°C , Sodium Hydroxide Powder ( 80-100 Mesh ) Extrapure ( 500 Gms.Per Bottle ) , Hydro Chloric Acid ( 500 Ml Per Bottle ) , Citric Acid ( > 99.5% ) ( 500 Gms Per Bottle ) , Potasium Citrate ( 500 Gms Per Bottle ) , Tri-Sodium Citrate Dihydrate ( 500 Gms Per Bottle ) , Sodium Azide ( 100 Gms Per Bottle ) , Bromylin Crude Powder ( 100 Gms Per Bottle ) , Chloroform ( 500 Ml Per Bottle ) , Neutralizing Solution ( 24 Ml ) , Digitonin ( 1 Gm ) , Di-Ethyl Ether ( 500 Ml Per Bottle ) , Ethanol 50% ( 500 Ml Per Bottle ) , Methylene Chloride ( 500 Ml Per Bottle ) , Xylene ( 500 Ml Per Bottle ) , Chymotrypsin ( 1 Gm ) , Vicia Graminea Lectin ( Anti-N Lectin ) ( 5 Ml Per Bottle ) , Polybrene ( 5 Gms. ) , Pronase ( 5 Gms. ) , Trypsin ( 100 Gms.Per Bottle ) , Di-Butyl Phthalate ( 500 Ml Per Bottle ) , Di-Methyl Phthalate ( 500 Ml Per Bottle ) , Sucrose ( 500 Gms.Per Bottle ) , Di-Potasium Edta ( 500 Gms.Per Bottle ) , Magnesium Chloride ( 100 Gms.Per Bottle ) , Chromic Chloride ( 500 Gms. Per Bottle ) , Chloramphenicol ( 5 Gms. ) , Dextrose ( 500 Gms.Per Bottle ) , Inosine ( 500 Gms.Per Bottle ) , Neomycin Sulphate ( 5 Gms. ) , Calcium Chloride ( 500 Gms.Per Bottle ) , Sodium Bicarbonate ( 500 Gms.Per Bottle ) , Sodium Carbonate ( 500 Gms.Per Bottle ) , P Nitrophenyl Phosphate ( 25 Gms. ) , Whatmans Filter Paper-100Mm ( 100 Nos. Per Pack ) , Ficoll Hypaque ( 100 Ml Per Bottle ) , Single Channel Variable Pipettes 20 -200 ?L* Speficiation: 1. Should Be Duly Ce Certified Or Approved 2. The Pipette Should Be Duly Calibrated By External Firms Duly Approved By Statutory Authorities 3. Spring Loaded Tip Cone For Connecting Tips Very Tightly 4. Adjustment Opening For Adjusting Pipettes To A Specific Liquid And Volume 5. Control Button With Very Low Operating Force, Color Indication For Pipette Volume 6. Tip Ejector With Very Low Operating Force, Positioned For Perfect Ergonomics. 7. Volume Display: 4 Digits With Magnifier. 8. To Provide Thermal, Mechanical And Chemical Stability Piston Should Manufactured With The Combination Of Fortron And Peek Material 9. Very Easy Removable Lower Part For Cleaning Pipette 10. Fully Autoclavable 11. No Discoloration Upon Uv Irradiation 12. 2 Years Warranty 13. Volume Range 20 – 200 ?L 14. Returnable Samples Should Be Provided For Evaluation , Single Channel Variable Pipettes 100 -1000 ?L* Speficiation: 1. Should Be Duly Ce Certified Or Approved 2. The Pipette Should Be Duly Calibrated By External Firms Duly Approved By Statutory Authorities 3. Spring Loaded Tip Cone For Connecting Tips Very Tightly 4. Adjustment Opening For Adjusting Pipettes To A Specific Liquid And Volume 5. Control Button With Very Low Operating Force, Color Indication For Pipette Volume 6. Tip Ejector With Very Low Operating Force, Positioned For Perfect Ergonomics. 7. Volume Display: 4 Digits With Magnifier. 8. To Provide Thermal, Mechanical And Chemical Stability Piston Should Manufactured With The Combination Of Fortron And Peek Material 9. Very Easy Removable Lower Part For Cleaning Pipette 10. Fully Autoclavable 11. No Discoloration Upon Uv Irradiation 12. 2 Years Warranty 13. Volume Range 100 – 1000 ?L 14. Returnable Samples Should Be Provided For Evaluation , Single Channel Variable Pipettes 5-20 ?L* Speficiation: 1. Should Be Duly Ce Certified Or Approved 2. The Pipette Should Be Duly Calibrated By External Firms Duly Approved By Statutory Authorities 3. Spring Loaded Tip Cone For Connecting Tips Very Tightly 4. Adjustment Opening For Adjusting Pipettes To A Specific Liquid And Volume 5. Control Button With Very Low Operating Force, Color Indication For Pipette Volume 6. Tip Ejector With Very Low Operating Force, Positioned For Perfect Ergonomics. 7. Volume Display: 4 Digits With Magnifier. 8. To Provide Thermal, Mechanical And Chemical Stability Piston Should Manufactured With The Combination Of Fortron And Peek Material 9. Very Easy Removable Lower Part For Cleaning Pipette 10. Fully Autoclavable 11. No Discoloration Upon Uv Irradiation 12. 2 Years Warranty 13. Volume Range 5 – 20 ?L 14. Returnable Samples Should Be Provided For Evaluation , Multi Channel Variable Pipettes 20 - 200 ?L* Speficiation: 1. Should Be Duly Ce Certified Or Approved 2. The Pipette Should Be Duly Calibrated By External Firms Duly Approved By Statutory Authorities 3. Spring Loaded Tip Cone For Connecting Tips Very Tightly 4. Adjustment Opening For Adjusting Pipettes To A Specific Liquid And Volume 5. Control Button With Very Low Operating Force, Color Indication For Pipette Volume 6. Tip Ejector With Very Low Operating Force, Positioned For Perfect Ergonomics. 7. Volume Display: 4 Digits With Magnifier. 8. To Provide Thermal, Mechanical And Chemical Stability Piston Should Manufactured With The Combination Of Fortron And Peek Material 9. Very Easy Removable Lower Part For Cleaning Pipette 10. Fully Autoclavable 11. No Discoloration Upon Uv Irradiation 12. 2 Years Warranty 13. Volume Range 20 – 200 ?L 14. Returnable Samples Should Be Provided For Evaluation , Pipette Tips 2-200 Ul* ( 1000 Nos. Per Pack ) Description: Used For Accurate Measurement Of Small Volume Fluid Dispensing. Useful For Safety Of Laboratory Personnel Speficiation: 1. Compatible With International Standard Pipettes Attachable By Firm Grip 2. Available In Packs Of 1000 Tips 3. Non Sticky In Nature 4. Smooth Internal Surface 5. Pipette Should Be Clean, With Patent Tips That Are Sharp And Pointed 6. White Or Yellow In Colour 7. Should Not Be Made Of Reused Plastic , Pipette Tips 200-1000 Ul* ( 1000 Nos. Per Pack ) Description: Used For Accurate Measurement Of Small Volume Fluid Dispensing. Useful For Safety Of Laboratory Personnel Speficiation: 1. Compatible With International Standard Pipettes Attachable By Firm Grip 2. Available In Packs Of 1000 Tips 3. Non Sticky In Nature 4. Smooth Internal Surface 5. Pipette Should Be Clean, With Patent Tips That Are Sharp And Pointed 6. Pink And Blue Transparent In Colour 7. Should Not Be Made Of Reused Plastic , Hemocue Cuvettes# ( 200 Nos. Per Pack ) , Carbon Brush For Remi R-8C Table Top Centrifuge , Leishmans Stain Powder ( 100 Gms.Per Bottle ) , Grams Stain Solution Kit , Methanol ( 5 Litres Per Bottle ) , Sponge Ball For Blood Donors , Paper Tumbler For Drinking Milk - Donor Refreshment ( 100 Nos. Per Pack ) , Test Tube - 5Ml With Clot Activator ( 100 Nos. Per Pack ) , Glass Slides ( 100 Nos. Per Pack ) , Temperature - Sensitive Indicators ( 2-6°C ) For Monitoring Red Cell Blood Bags , Blood Irradiation Indicator Labels , Oxygen Mask With All Sizes Venturie Adapter , Re-Breathing Bags - All Sizes , Round Bottom Test Tube ( Without Rim: 12X75cm ) ( 100 Nos. Per Pack ) , Round Bottom Test Tube ( Without Rim: 12X100cm ) ( 100 Nos. Per Pack ) , Test Tube Rack Stand For 72 Tubes , Test Tube Rack Standfor 48 Tubes , Test Tube Rack Standfor 18 Tubes , Glass Slides ( 100 Nos. Per Pack ) , Vacutainer – 10 Ml Tube Sterile With Acda ( 100 Nos. Per Pack ) , Measuring Cylinder - 250 Ml , Measuring Cylinder - 500 Ml , Measuring Cylinder - 1 Litre , Ss Forceps - 18 Inch , Storage Vial - 1 Ml ( 1000 Nos. Per Pack ) , Storage Vial - 2 Ml ( 1000 Nos. Per Pack ) , Storage Vial - 3 Ml ( 1000 Nos. Per Pack ) , Storage Vial - 5 Ml ( 1000 Nos. Per Pack ) , Storage Vial - 10 Ml ( 1000 Nos. Per Pack ) , Blood Bags * Note:* Item Nos From 2.164 To 2.181 - To Be Procure Only After Ascertaining Stock On Hand And Requirement At The Time Of Placement Of Supply Order. * Blood Bags Requirement Is Likely To Vary Due To Introduction Of New Technique Of Blood Componentseparation Using Automatic Blood Component Extractor ( Buffy Coat Method ) . Specifications For All The Below Blood Bags: For Detailed Specifications, Please Refer Tender Documents , Blood Bags With Cpda1 - Single ( 350 Ml. ) * , Blood Bags With Cpda1- Double ( 350 Ml. ) * , Blood Bags With Cpda1- Double ( 450 Ml. ) * , Blood Bags With Cpda1 - Triple ( 350 Ml. ) * , Blood Bags With Cpda1 - Triple ( 450 Ml. ) * , Triple Sagm Blood Bags ( 450 Ml. ) * , Triple Sagm Blood Bags ( 350 Ml. ) * , Transfer Blood Bags ( 300Ml. ) * , Blood Bags ( 450 Ml. ) With Pre Storage Leukocyte Reduction Filters * , Blood Administration Set With Filter* ( 25 Nos. Per Pack ) , Rbc Leukocyte Reduction Filters ( Lab Side With Transfer Bag ) - 3Rd Generation* , Blood Bags ( 350 Ml ) With Pre Storage Leukocyte Reduction Filters * , Platelet Leukocyte Reduction Filters ( Lab Side With Transfer Bag ) - 3Rd Generation* , Platelet Leukocyte Reduction Filters ( Bed Side ) - 3Rd Generation* , Paediatric Blood Bags With Cpda1 ( 100Ml ) * , Blood Bag For Platelet Pooling By Buffy Coat Method With Leukoreduction Filter ( 4 To 6 Bags ) , Platelet Additive Solution ( 500 Ml Per Pack ) , Penta Blood Bags With Cpda1* , Testing Kits* Specifications For All Below Testing Kits From Item No: 3.182 To 3.193 1. All The Above Mentioned Test Kits Should Be Duly Certified By Statutory Authorities Namely Drug Controller General Of India And Dghs For Use In Blood Banks 2. The Manufacturers Should Have Supplied Test Kits Continuously And Satisfactorily To Government Blood Banks For A Period Of 5 Years. List Of Such Government Blood Banks Should Be Enclosed. A Satisfactory Quality And Supply Certificate From Any Of The Two Government Blood Banks Should Be Enclosed For Preceeding 3 Years. 3. 4Th Generation Test Kits Mentioned Above Should Meet Standard Definitions, Parameters As Per Standard Text Books And Duly Certified As 4Th Generation Test Kits By Drug Controller Of India. , Hiv Elisa Test Kits* ( 96 Tests Per Pack ) , Hiv Elisa 4Th Generation Test Kits* ( 96 Testsper Pack ) , Hiv Rapid Test Kits* ( 50 Tests Per Pack ) , Hcv Elisa Test Kits* ( 96 Tests Per Pack ) , Hcv Elisa 4Th Generation Test Kits* ( 96 Tests Per Pack ) , Hcv Rapid Test Kits* ( 50 Testsper Pack ) , Hbsag Elisa Test Kits* ( 96 Tests Per Pack ) , Hbsag Elisa 4Th Generation Test Kits* ( 96 Tests Per Pack ) , Hbsag Rapid Test Kits Whole Blood / Serum* ( 50 Tests Per Pack ) , Syphilis Card Test* ( 100 Tests Per Pack ) , Vdrl Rpr Test Kits* ( 100 Tests Per Pack ) , Card Test For Detection Of Pan Malaria ( Pf & Pv ) Specific Ldh Using Whole Blood * ( 25 Tests Per Pack ) , Immunology Kits ( Should Providesamples For Evaluation . Final Selection Will Be Based On The Results Of Such Evalaution. Any Demonstration Or Training Has To Be Provided Before Evaluation ) *# *# Specifications For Gel Card Centrifuge And Incubator Placement Specificatons ( From Item No. 4.194 To 4.208 ) 1. Thegel Card Centrifuge And Incubatorequipment Should Be Placed And Maintained Free Of Cost Against The Purchase Of Gel Cards Under Contract Agreement For Two Years. 2. The Gel Card Centrifuge And Incubator Will Be Placed On The Condition That It Will Be Owned And Maintained By The Firm Entering Into The Contract For Supplying The Entire Immunohematology Items From 4.194 To 4.208 3. Equipment To Be Placed In The Premises Of Blood Bank At Jipmer Under A Guarantee For Free Maintenance For The Contract Period. 4. Necessary Inspections And Calibration Certificates To Verify The Compliance Of The Placed Equipment For Immunohematology Workup 5. Necessary Training Will Have Tobe Given To The Blood Bank Staff Members, If Needed, From Time To Time. 6. Supplier Will Place Another Additional Equipment Of The Same Specification And Model Under The Same Terms And Conditions To Cater For Uninterrupted Trouble Free Services. 7. The Supplier Will Give An Undertaking That The Equipment Supplied Is Of The Latest Model And Version Available As On Date Of Entering Into The Contract. 8. The Supplier Should Ensure That Both The Equipments Are Functioning At All Times. In Case Of Failure Of Any One Of The Instruments The Downtime Should Not Be More Than 24 Hours. Only Under Extraordinary Circumstances The Downtime For The Equipment Can Be Increased By A Period, Which Should Not Exceed 72 Hours. 9. Suppliers Should Quote For The All Above Items Mentioned Item No From 4.194 To 4.208. No Partial Quote Will Be Entertained. If Partial Quote, The Tender For The Above Items Will Be Summarily Rejected. 10. Authorized Distributor Certificate From The Original Manufacturer Should Be Provided. , Liss Diluent Ii ( 500 Ml Per Bottle ) , Antibody Screening 3 Red Cell Panel , Antibody Identification 11 Red Cell Panel , Antibody Identitication Extended 22 Red Cell Panel , Red Cell Preserving Solution For Serological Applications ( 500 Ml Per Bottle ) , Diluent-I, Modified Bromelin For Blood Grouping And Enzyme Tests ( 500 Ml Per Bottle ) , Red Cell Elution Kits ( 10 Tests Per Pack ) , Liss Coombs Gel Cards ( 288 Tests Per Pack ) , Coombs Anti Igg Gel Cards ( 288 Tests Per Pack ) , Abo / D+ Reverse Grouping Gel Cards ( 24 Tests Per Pack ) , Rh Subgroup +Cw+K Gel Cards ( 48 Profile ) , Dc Screening Gel Cards ( 12 Profile ) , Dat Igg-Dilution Gel Cards ( 12 Profile ) , Dat Igg1 / Igg3 Gel Cards ( 12 Profile ) , Nacl Gel Cards ( 288 Tests Per Pack ) , Rare Antiseras , Anti Cde Igm ( 2 Ml ) , Anti K Igm ( 5 Ml ) , Anti C Igm ( 2 Ml ) , Anti C ( Small C ) Igm ( 2 Ml ) , Anti E Igm ( 2 Ml ) , Anti E ( Small E ) Igm ( 2 Ml ) , Anti K ( Small K ) Igm ( 1 Ml ) , Anti Fya ( 1 Ml ) , Anti Fyb ( 1 Ml ) , Anti Jka ( 2 Ml ) , Anti Jkb ( 2 Ml ) , Anti M ( 2 Ml ) , Anti N ( 1 Ml ) , Anti S ( 1 Ml ) , Anti S ( Small S ) ( 1 Ml ) , Anti Lea ( 2 Ml ) , Anti Leb ( 2 Ml ) , Anti Lua ( 1 Ml ) , Anti Lub ( 1 Ml ) , Anti P ( 2 Ml ) , Blood Bags For Total Automated Blood Component Extraction* See Also Above As For Blood Bags Specifications Note: 1. Samples / Brochure Listing Product Details / Certificate Certifying Compliance To Specifications Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender. 2. In Case Of Non-Receipt Of Samples Within One Week After Display Of E-Tender, An E-Mail Remainder ( Mentioned In Tender Form ) Will Be Sent To Supply The Same. In Case Of Non Receipt Of Sampleswithin One Week Of Reminder The Bidding Will Automatically Stands Cancelled. 3. Selection Will Be Made After Evaluation Of Samples / Brochure, Certificate ***For Detailed Specifications, Please Refer Tender Documents , Top And Top / Top And Bottom Quadra And Penta Blood Bags For Totally Automated Component Exraction.* , Consumables For Chemiluminscence System Note: 1. Samples / Brochure Listing Product Details / Certificate Certifying Compliance To Specifications Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender. 2. In Case Of Non-Receipt Of Samples Within One Week After Display Of E-Tender, An E-Mail Remainder ( Mentioned In Tender Form ) Will Be Sent To Supply The Same. In Case Of Non Receipt Of Sampleswithin One Week Of Reminder The Bidding Will Automatically Stands Cancelled. 3. Selection Will Be Made After Evaluation Of Samples / Brochure, Certificate Testing Kits For Chemiluminscence Immunoassay System - Should Have Kits For Screening Hcv Antigen Also. 1. Fully Automated Immunoassay System – Chemiluminscence, Floor Model Equipment Should Be Placed And Maintained Free Of Cost Against The Purchase Of Blood Bags Under Contract Agreement For Two Years. 2.The Manufacturers Should Have Supplied Those Kits With A Similar Contract To Other Government Blood Banks For A Period Of 2 Years. List Of Such Government Blood Banks Should Be Enclosed. A Satisfactory Quality And Supply Certificate From Two Government Blood Banks Should Be Enclosed For Preceeding 1 Year With Detailed Rate List. Specifications For Chemiluminscence Immunoassay System - As Specified In Tender Documents , Hiv – Fourth Generation Kit With Fourth Generation Controls, Calibrators From Same Manufacturer. ( Who P24ag Int Std90 / 636 ) < 0.90Iu / Ml ) ( 100 Tests Per Pack ) , Hbsag - Capable Of Qualitative Detection Of Hepatitis B Surface Antigen ( Hbsag ) With Excellent Mutant Detection. ( 100 Tests Per Pack ) , Hcv - Capable Of Qualitative Detection Of Antibody To Hepatitis C Virus ( Anti-Hcv ) . ( 100 Tests Per Pack ) , Equipments , Water Bath-Laboratory Range Specifications: 1. Stainless Steel Chamber 2. Indirect Heating System 3. Adjustable Temperature ( Range 10°C – 70°C ) With Thermostat 4. Temperature Inside Serological Water Bath Is Controlled With A Sensitivity Of + 0.5ºc Or Better 5. Slot For Thermometer 6. Visual Display Of Temperature. 7. Dimensions To Be Of That To Keep 2 Standard Test Tube Racks 8. Stainless Steel Top Cover 9. Warranty - 2 Years , Digital Weighing Scale Specifications: 1. Range Of Weight: 0.5 Gm - 3 Kg. With Sensitivity Of 0.5 Gm 2. Display Should Be Digital And Option For Tare ( Zeroing ) Should Be Available 3. Chargeable Battery Operated 4. Platform Should Be Of Stainless Steel, Washable And Dimension Should Be Minimum Of 300 Mm X 200 Mm 5. Weighing Machine Should Be Calibrated By Statutory Authorities 6. Manufacturer Should Be Iso 2001 Company 7. Washable Or Removable Tray 8. Warranty - 2 Years , Blood Transportation Box Specifications: 1. Temperature Range: 2 To 8 Deg C 2. Forced Air Cooling System 3. Perfect Alarm System 4. Inner Fixed Battery Supply 5. Capacity : 80 L 6. Led Display 7. Warranty: 2 Years , Binocular Microscope ( Without D.G ) Specification: 1. Coarse & Fine Focus 2. 5X, 10X, 40X, 100X Magnification 3. Eyepiece Pointer 4. Moveable Abbe Condenser 5. 6-Position Disk Diaphragm 6. Built-In Illumination With Halogen Bulb With 2 Spare Bulbs 7. Warranty: 2 Years From The Date Of Installation , Table Top Centrifuge Specification: 1. Microprocessor Controlled, Fixed Angle Rotor 2. Maximum Speed: 5, 000 -5, 200 Rpm 3. Should Be Able To Spin 24 Tubes 13 X 75 Mm Or 13 X100 Mm At A Time 4.The System Should Have Brush Less Induction Drive 5. Dynamic Braking For Rapid Stop Without Cell Disturbance 6. Body Should Be Made Of Strong Fabricated & Corroision Resistent Steel 7. Should Have A Digital Timer And Display 8. Maximum Rcf ( Relative Centrifugal Force ) : 3000 - 3600 G 9. Digital Speedometer Should Have Speed Regulator, Digital Speed Meter And 0-60 Mins. Timer 10. Maximum Cap: 250-300 Ml 11. Calibration Certificates Should Be Produced At The Time Of Installation 12. Authorization Letter Should Be Procured From The Manufacturer 13. Warranty: 2 Years From The Date Of Installation , Rh View Box Specification: 1. Built-In Temperature Indicator For Easy, Accurate Monitoring Of Viewing Area. Viewing Area Temperature Adjusts Easily To Compensate For Ambient 2. Temperature Changes. ( Range: 45°C To 50°C ) 3. Rh Slides Reaches Temperature Of 37°C To 39°C In Two Minutes, Eliminating Wasted Heat Up Time. 4. Soft, Fluorescent, Glare Free Light Provide Uniform Illumination Of Slide Contents. 5. View Box Can Be Gently Rocked Using Large Knob On Support Cradle. 6. Sturdly, Easy-To-Clean Metallic Powder Compact Case. Utilizes Minimal Bench Space. 7. Meets Rh Slide Test Standard Set By The Aabb. 8. Unit Conveniently Includes Three-Wire Cord And Plug. 9. Light - Fluorescent Glare Free 10. Temp Display - 37°C ± 2°C 11. Power - 220 V - 50Hz 12. Warranty - 2 Years , Specific Gravity Meter Specification: 1. Should Read Specific Gravity From 1.000 To 1.040Ƒ 2. Hydrometer Should Have A Solid Shot-Weighted Float And An Extra Long Stem For Grasping 3. Jar Should Be 5 In. ( 13Cm ) High With Extra Wide Base 4. Warranty - 2 Years , Hot Air Oven - Laboratory Use Specification: 1. Temperature Range: 5°C Above Ambient To 250°C Maximum 2. Temperature Accuracy: + / - 2°C 3. Temperature Uniformity: + / - 1°C 4. Controls: Pid Controller 5. Temp Display: Led Display 6. Sensor: Pt-100 7. Heating Element: Nichrome Wire / Kanthal A1 8. Safety Device: Over Temperature Protection, Electric Leakage Breaker, Temperature Safety As Per Din 12880 Class 3.1 9. Exterior Chamber: Ms Powder Coated 10 .Interior Chamber: 304 Stainless Steel 11. Insulation: Mineral Wool 12. Doors: Solid Doors W / Silicone Rubber Gasket & Lock 13. Shelves: 2 – 3 Stainless Steel Shelves ( Removable ) 14 .Air Circulation: Forced Air Circulation 15. Capacity: 250 Litres 16. Others:Heating Thermostat, Nabl Certification, Manufacturer Calibration Certificate 17. Warranty: 2 Years , Agglutination Viewers For Blood Bank Use ( Concave Mirror ) Specification: 1. Designed For Use In Blood Typing, Cross Matching, Antigen Typing, Titers And Other Agglutinations Tests 2. Illuminates Test Tube Contents Through The Use Of A 5-Watt Bulb From Above And A Magnifying Mirror From Below 3. Easy To Use Side-Mounted On / Off Switch 4. Flexible Neck Allows For Easy Manipulation Of Light Source 5. Input: 120V 60 Hz, 18W; Output: 12Vac 500Ma 6. Warranty: 2 Years , Cold Chain Boxes ( 4 Pack Vaccine Carriers ) To Transport Blood To Wards ( Blue - 150 Nos, Pink-150- Nos, Yellow - 100 Nos, White-100 Nos ) Specification: 1. Storage Capacity: 1.63 Litres 2. Lid Type And Fixings: Removable 3. External Surface Material: Hdpc 4. Internal Lining Material: Hips 5. Insulation Material: Cfc-Free Polyurrethane 6. Insulation Thickness: 35-38 Mm 7. Number Of Ice Packs: 4 X 0.4 Litres 8. Cold Life Without Opening , Tested By Who Approved Laboratory: 4 Hours At 6°C 9. Warranty: 2 Years , Vdrl Shaker Specification: 1. Platform Size 12” X 12” For Keeping Reaction Trays. 2. Timer With 0 To 30 Minutes For Control Of Shaking Duration With 1 Minute Interval. 3. Should Have Built In Speed Regulator With Maximum Speed Of 150-180 Rpm. 4. Warranty: 2 Years , Plasma Thawing Bath Specification: 1.Unit Should Thaw Atleast 8 Plasma Units In Less Than 20 Minutes. 2.Digital Electronic Bench Top System With Led Display. 3.Should Have 2 Separate Basket Asemblies Securely Holding Plasma Bags 4.Water Bath Based Operating System At A Preset And Precise Temperature Of 37°C ± 0.5°C 5.Should Give An Alarm When The Plasma Bags Are Thawed. 6. Provision For Programmable Time Setting For Length Of Thawing With Audio Completion Signal. 7. Should Have A System To Drain The Chamber. 8. Warranty: 2 Years , Blood Bag Digital Weighing Balance - Double Pan Specification: 1. Should Be An Electronic Differential Scale. 2. Weight Measurement - 0-2500 Grams ( Range ) 3. For Weighing 2 Blood Bags Simultaneously For Balancing For Centrifugation Purposes & Should Display The Difference Of Two Loads. 4. Maximum Weight Difference - 2500 Grams 5. Weight Sensors - Load Cells 6. Weight Display Panel - 4-Digit Led Display 7. Weight Calibration Tolerance - + / -1 Gram 8. Decimal Truncation Error - 1 Gram 9. Total Accuracy Of Display - + / -2 Grams 10. Weight Accuracy - 4 Grams 11. 18V Dc ( A / C Power Adapter 100-120 / 220-240 V A / C In ) 12. Power Consumption - 5 Watts 13. Warranty - 2 Years , Blood Bag Digital Weighing Balance - Single Pan Specification: 1. Should Have A Microprocessor Based Single Pan Analytical Balance With High Accurary And Precision Is Required 2. Should Have Weigh Accuracy Of Upto Iii Decimal Place 3. Should Have A Auto-Self Calibration Facility 4. Should Have A Auto Zero Setting. 5. Shoud Have One Touch Calibration 6. Should Have Weighing Capacity Upto 500 Gm 7. Should Have A Readability And Repeatability 0.001 / G 8. Should Have Stabilization Time <5 Secs. 9. Should Have Lcd Display For Showing Weight 10. Power Input To Be 220 V To 240 V. Ac, 50 Hz 11. Should Provide With Suitable Ups With Maintenance Free Batteries For Minimum One Hour Back Up 12. Warranty: 2 Years , Hemocue Testing System Specification: 1. Measurement Range: 0–25.6 G / Dl ( 0–256 G / L, 0–15.9 Mmol / L ) 2. Results: Within 20 Seconds 3. Sample Volume: ~10 ?L 4. Storage Temp.: Analyzer: 0–50 °C ( 32–122 °F ) Microcuvettes: Unopened 15–30 °C ( 59–86 °F ) ; Three-Month Open Vial Stability 5. Operating Temp: 15–30 °C ( 59–86 °F ) 6. Power: Ac Adapter Or 4 Aa Batteries 7. Interface: Printer And Hemocue® Basic Connect™ Including Optional Barcode Scanner 8. Quality Control: Built-In Selftest ; Optional Liquid Controls 9. Sample Material: Capillary, Venous Or Arterial Whole Blood 10. Calibration: Factory Calibrated Against The Icsh Reference Method; Needs No Further Calibration 11. Warranty: 2 Years , Table Top Incubator Specification: 1. Sturdy Double Walled Unit With Outer Chamber Made Of Ms Steel And Enamel Painted. 2. Inner Made Of Ss. 3. Temperature 37°C ± 1°C 4. Digital Temperature Controller With Display 5. Inner Diameter 300 X 300 X 300 6. Warranty - 2 Years , Domestic Refrigerator Specifications: 1. Capacity: 300 Ltrs ( Double Door ) 2. Material: Stainlees Steel Puf 3. Interior Light 4. Reversible Door Opening 5. Condensation Drain 6. Voltage: 220 V 7. Warranty: 2 Years , Bp Apparatus Self Check Dial Arm Type Sphygmomanometer Specification: 1. Should Be Aneroid Type 2. Should Have Isi Mark. 3. Should Have A Measuring Range From 0 To 300 Mmhg 4. Should Be Provided With Adult Arm Cuffs Of Size Medium & Large And Paediatric Cuff. 5. The Dial Mano Meter Markings And Graduations Should Be Permanent And Clearly Visible And Filled With Pigments, With Diameter Of Minimum Diameter Of 160 Mm 6. Body & Bazel – Aluminium Die Casted ( Powder Coated ) , Screw Type Bazel 7. Sensing-Corrogated Phosphorous Bronze Twin Capsule Bellows. 8. Movement Mechanism – Brass 9. Connection : Brass, Nickel Plated For 3-4 Mm Rubber Hose 10. Dial – Aluminium 11. Pointer – White Coated, Thin & Sharp Made Of Phosphorous Bronze 12. Window Lenses – Clear Plastic. 13. All Plastic Parts, If Any Used Should Not Crack, Flake, Peel Or Disintegrate In Normal Use. 14. The Inflating Rubber Bag Should Be Capable Of Withstanding An Internal Pressure Of 450 Mmhg Without Leaking. 15. The Inflating Bulb Should Be Soft And Should Not Have Any Joints Or Ridges. 16. The Fastening Arrangements Of The Cuff Should Be Of Hook And Loop Type ( Velcro ) 17. The Threading And Fastening Arrangement Of The Cuff Should Show No Sign Of Slip Or Failure When Subjected To The Maximum Test Conditions. 18. The Rubber Tubes Used Should Have An Internal Diameter Of 3 ± 0.5Mm And The External Diameter Should Not Be Less Than 8Mm. 19. The Tubes Should Be Fitted With Male And Female Leur Connectors. 20 .Should Provide A Carry Bag To Keep The Whole System Safe And Sound. All Parts Should Be Replaceable In Case Of Breakage. 21. Warranty: 2 Years , Insecticutors Description: Insecticutors Are Reuired In Bleeding Area, Donors Screening Area, Issue Section For Controlling Flies And Other Insects Which May Contaminate Blood Components. Specification: 1. Powder Coated Body For Long Lasting & Durability 2. Phillips Uv Tubes 3. Copper Wiring And Copper Choke For Electricity Saving 4. Rugged 3 Kv Transformer 5. Zinc Coated Grid To Prevent Rusting 6. Collection Tray For Killed Flies 7. Pvc Coated Guard To Avoid Shock 8. Low Power Consumption 9. Warranty: 2 Years , Hot And Cold Water Dispenser For Drinking Purpose Description: Provides Safe Drinking Water For Blood Donors 1 ) Provides Cool Drinking Water At Blood Donation Camps 2 ) Decreases Chances Of Vasovagal Blood Donor Reactions. 3 ) Positively Enhances Donor Reaction Affecting Donor Retention. Specification: 1. Quiet Operation, Runs On Electricity And Easy To Clean. 2. Anti Corrosive And No Costly Maintenance 3. Plain / Hot / Cold Water Option Available 4. Compact Design Taking Very Less Space. 5. Long Lasting Plastic Front Panel And Faucets 6. Convenient Removable Drip Tray 7. Led’S To Indicate Primary Function 8. Low Power Consumption 9. Bimetal Sensors To Ensure Overheating Protection 10. Weight Less Than 20 Kg, Compact And Mobile 11. Spill Proof Bottle Holder - Optional 12. Warranty: 2 Years , Vein Illumination Device Description: It Is Used To Visualize Subcutaneous Veins By The Phlebotomist. Useful For A ) Prevent Deferrals Because Of Poor Venous Access B ) Preventing Loss Of Unit Because Of Inefficient / Insufficient Collection C ) Useful For Training Phlebotomist And Building Their Confidence D ) Enhances Donor Experience E ) Decreases Chances Of Apheresis Procedure Failure F ) Non Contact Venous Assessment For Phlebotomy Specification: 1. Based On Infra Red Technology 2. Clearly Displays Subcutaneous Vasculature Without Any Contact With Skin 3. No Need For Calibration Or Adjustments 4. Includes Charging Cradle And Power Supply Cord 5. Run Time Of At Least Two Hours Per Charge 6. More Than 300 Vasculature Visualizations Per Charge 7. Accessories Available Like: 1 ) Stand For Hands Free Operation With And Without Charger 2 ) Clamps For Fixing For Hands Free Operation 3 ) Mobile Hands Free Operation 6 ) Padded Carry Case With Shoulder Sling 4 ) Belt Carry Case. 8. Warranty: 2 Years , Plate Shaker Specification: 1. Platform Size 12” X 12” For Keeping Reaction Trays. 2. 4 Number Of Microplates Can Be Kept At A Time 3. Timer With 0 To 30 Minutes For Control Of Shaking Duration With 1 Minute Interval. 4. Should Have Built In Speed Regulator With Maximum Speed Of 150-180 Rpm. 5. Warranty: 2 Years , Vacuum Cleaner ( Hand Held ) Specification: 1. Special Features: 2 Tier Radial Cyclones, Direct-Drive Motor, Washable Pre-Motor Filter 2. Cleaning Method: Dry 3. Cleaner Type: Handheld 4. Included Tools: Combination Nozzle, Extension Hose, Futon Tool, Gap Nozzle, Mini Motorized Tool 5. Warranty: 2 Years , Phlebotomy Mannequin Specification: 1. Advanced Venipuncture And Injection Arm - White Which Gives Complete Venous Access For Phlebotomy As Well As Iv Therapy, Plus Sites For Intra-Dermal And Intramuscular Injections. 2. Injectable Metacarpal 3. Digital And Thumb Veins 4. Median Cephalic 5. Median Basilica 6. Median Cubital Veins 7. Basilic 8. Cephalic 9. Accessory Cephalic 10. Median Antibacterial Veins 11. Deltoid Muscle 12. Warranty: 1 Year , Microplate Centrifuge Specification: 1. Microprocessor Controlled, Fixed Angle Rotor 2. Maximum Speed: 5, 000 -5, 200 Rpm 3. Should Be Able To Spin Microplates 4.The System Should Have Brush Less Induction Drive 5. Dynamic Braking For Rapid Stop Without Cell Disturbance 6. Body Should Be Made Of Strong Fabricated & Corroision Resistent Steel 7. Should Have A Digital Timer And Display 8. Maximum Rcf ( Relative Centrifugal Force ) : 3000 - 3600 G 9. Digital Speedometer Should Have Speed Regulator, Digital Speed Meter And 0-60 Mins. Timer 10. Maximum Cap: 250-300 Ml 11. Calibration Certificates Should Be Produced At The Time Of Installation 12. Authorization Letter Should Be Procured From The Manufacturer 13. Warranty: 2 Years From The Date Of Installation , Cryoprecipitatebath Specification: 1. For Uniform Thawing Of Plasma Bags At Present Temperature Of 4°C ± 0.2°C 2. High Capacity Pump To Facilitate Optimum And Uniform Thawing Of Plasma 3. Capacity: 10-12 Bags Per Run Or Per One Cycle 4. System To Prevent Contamination Of Individual Ports During Thawing 5. Microprocessor Based Controller For Precise Monitoring And Controlling Of Temperature 4°C ± 0.2°C 6. Input Power Supply: 230 + 10%V, 50Hz, 15A Single Phase Ac 7. Power Consumption: Maximum 1600W 8. Operating Temperature: 3.5°C- 4.5°C 9. Programmable Temp. Range: 3°C - 50°C 10. Display Resolution: 0.1°C 11. Temp Controller: Microprocessor Based Digital Controller 12. Stainless Steel Tank Of 22 Guage & Stainless Steel Lid Of At Least 20 Guage. 13. Time Taken For One Process: Not More Than 2 Hours For Plasma Bags Store At 40°C 14. Tray: Stainless Steel, Removable Tray Of Individual Compartments For Holding Plasma Bags. 15. External Dimension ( W X D X H ) : Should Be Less Than 850 X 500 X 800 Mm ( ±10% ) 16. Castor Wheels: Mounted On Lockable Castor Wheels 17. Temp. Sensing Method: Sealed Sensor Dipped Directly In The Water 18. Weight: Less Than 70 Kg. 19. Drain Line With Shut Off Valve Can Be Connected To Existing Plumbing. 20. Warranty: 2 Years , Blood Collection Monitor Specification: 1. The System Is Used To Collect Donated Blood From The Donor At The Same Time Mixing The Blood For Quality Collection Of Blood. 2. Pre-Selection Of Volume To Be Collected. Tarring Of Bag Volume Before Collection. Tarring Range: 0 – 600 G. Automatic Storage And Recall Of Set Volume. Measure Volume With Best Accuracy 3. Led Indication On Commencement Of Collection. 4. Led Indication And Audible Alarm At The End Of Collection. 5. Indication Of Time Taken For Collection. 6. Indication Of Blood Flow With Audio Alarm When Blood Flow Is Higher Or Lower Than Desired. Continuous Display Of Collected Volume, Flow And Time During Collection 7. Automatic Clamping At Termination Of Preset Volume Collection 8. Automatic Release Of Bag When Lifted. 9. Continuous Agitation Of Blood Bags During Collection: 12 – 16 Rpm. 10. Easy Provision To Change Preset Volume. 11. Should Operate On Mains As Well As Rechargeable Battery. On Battery It Should Operate For A Minimum Of 5-8 Hours. 12. Should Be Less Than 5 Kg 13. “ Pause Facility” To Pause The Collection. 14. Optional- Memory To Store Donation Data Such As Donor Number, Name Of Operator, Volume Collected 15. Should Measure Volume With Accuracy Less Than 1 % 16. The Unit Shall Be Capable Of Operating Continuously In Ambient Temperature Of 10 - 400 C And Relative Humidity Of 15-90% 17. Power Input To Be 220-240V Ac, 50Hz As Appropriate Fitted With Indian Plug 18. Should Be Technologically Advanced With Modern Blood Collection Scale And Mixer .It Should Be Light Weight & Portable. 19. Warranty: 2 Years , Gelcard Incubator Specification: 1. Dedicated To Centrifuge Usa Fda Approved, Sephadex Gel Micro Typing System Cards Based On Column Agglutination “Gel Technology”. 2. Usa Fda Approved, Sephadex Gel Micro Typing System Cards Based On Column Agglutination “Gel Technology”. 3. Incubator Should Have The Capacity To Incubate The Gel Card And Test Tubes For 37° 4. Automatic Balance Control 5. Warranty: 2 Years , Gelcard Centrifuge Specification: 1. Dedicated To Centrifuge Usa Fda Approved, Sephadex Gel Micro Typing System Cards Based On Column Agglutination “Gel Technology”. 2. Centrifuge Should Have Option To Run Gel Card And Test Tubes 3. Silent Centrifuge For Holding 24 Cards. Each Card With 6 Micro Wells 4. Automatic Balance Control 5. Centrifugation Time: 10 Minutes Or Less 6. Speed, Time And Functions Are Digital Display 7. Typing System Cards With ‘V” Shaped Bottom For Clarity In Results. 8. Monitored By Microprocessor. 9. Suitable Rpm. 10. Gel Cards Should Be Made Available For Abo& Rh Grouping, Rare Blood Group Antigens, Coombs Test, Pnh, Partial D Typing And Etc., 11. The Price Of The Card Should Be Frozen For A Minimum Period Of Three Years 12. 110V-240V / 50Hz- 120Hz. 13. Bis / Ec Conformity. 14. Enough Diluents And Abo Grouping Cards For 100 Tests And Coomb’S Card For 400 Tests With Adequate Diluents. 15. Warranty: 2 Years , Colorimeter- For Hemoglobin Estimation By Drabkins Method Specifications: 1. It Should Be Portable & Work On 220V & 5 Amp. 2.It Should Have Built In Minimum Of 3 Filters With 500, 540 And 600Nm 3. It Should Come With Minimum Of 5 Cuvettes 4. Display Should Be Digital 5. It Should Be Easily Calibrated 6. Warranty-2 Years , Digital Ph Meter With 3 Standard Buffers Specification: 1. Should Have Working Range From 0 To 14. 2. Should Have Resolution 0.1 / 0.01 Ph 3. Should Have Temperature Compensation Zero To 100 Degree C With Atc 4. Should Have Rs.232C Output And Supply Data Connector Cable 5. Should Have Automatic Calibration Facility. 6. Should Have 3 Stage Calibration. 7. Should Have Digital Display With 0.001 Ph Unit Readability 8. Should Supply Tri-Combination Ph / Atc Electrode 9. Should Supply Electrode + Standard Buffer Solution ( Ph 4.0, 7.0, 10.01 X 50Ml For Each Bottle ) + Standard Electrode Holder +Ac / Dc Adaptor. 10. Should Be Provided With An Electrode Holder / Arm With Smooth Movement 11. Warranty - 1 Year , Blood Bag Multifunction Hand Striper, Sealer And Cutter Specification: 1. The Body Should Be Made Of Pure Stainless Steel 2.The Handles Should Be Covered With Plastisol 3. Weight Should Be Less Than 200 Gms. 4. Should Be Certified By Ce And Iso 9001 5. Easy To Handle, Strip, Mix, Seal And Cut During Non Use 6. Warranty: 2 Years , Induction Stove Description: Require To Boil Milk And Other Fluids For Donor Refreshment Specification: 1. Single Stove 2. Heating With Warming Facility 3. Child Lock 4. Capable Of Cooking Under Fan / In Ac 5. Protection From Over Heating 6. Surface Safe To Touch During Operation 7. Protection From Spilling Of Food Items 8. Programmable For Time And Temperature 9. One Touch Fixed Program And Fixed Timer Facility 10. Digital Display 11. Auto Menu 12. Utensil Detection 13. Power Saving 14. Bis / Ce / Iso Certified 15. Warranty - 2 Years , Sonicator - Ultrasoundcleaning Bath Specification: 1. Fitted With Microprocessor Based Digital Temperature Indicator-Cum-Controller At Any Temperature From Ambient +5ºc To 60ºc. 2. Should Have A Digital Timer With Settable Range From 0-15 Min Or 0-30 Min ( Depending Upon The Capacity Ordered ) . 3. Extensively Protected Electronic Circuits Means Longer And Safer Operations. 4. High Frequency Electrical Energy Is Converted Into Ultrasound Waves By Means Of Ultrsonic Transducers. 5. Compact, Rugged And Highly Durable System. 6. Efficiency Of 90% Permits Maximum Cleaning Action, Low Power Consumption. 7. Extensively Protected Electronic Circuits Means Longer And Safer Operations. 8. Automatic Frequency Tuning For Maximum Output. 9. Input Range Of 170Vac-270Vac, Highest Immunity To Input Supply Variations. 10. Pre-Set Auto Degassing Function. 11. Pulse Sweep Power For Better Effective Cleaning. 12. To Work On 220 / 230 V Ac Supply. 13. Warranty: 2 Years , Spectrophotometer Specification: 1. Wave Length Range: 190 To 1100 Nm 2.Spectral Band Width: 1 Nm 3. Wave Length Display: 0.1 Nm Increments 4. Wave Length Accuracy: ± 0.1 Nm 5. Photometric System: Double Beam 6. Photometric Accuracy: ± 0.002 Abs 7. Baseline Statbility: Less Than 0.0003 Abs 8. Noise Level: Within 0.00005 Abs Rms Value ( At 700Nm ) 9. Warranty: 2 Years , Plasma Expressormanual Specification: 1. Suitable For Separating Plasma From All Types Of Blood Collection Bags Manually 2. Spring Loaded Bag Holder. Ensure That Bag Stays In Position 3. Compressor Plate Design To Exert Uniform Pressure On Donor Bag Minimizing Chances Of Rupture Of Bag. 4. Mode Of Operation - Manual 5. Acrylic Pressure / Plate 6. Warranty - 1 Year , Dry Block Incubator Specification: 1. Basic Device Without Exchangeable Thermoblocks. 2. 16 Tube Holders 3. Temperature Control Range:-50C To 99 º C. 4. Accuracy Of Temperature Control : At 0º C ± 1.0ºc 5. At 37º C± 0.5ºc And At 90º C± 1.0ºc 6. Heating-Up Speed: Approx. 5º C / Min 7. Range Of Time Phases 0:01To 99.59 Hrs 8. Power Supply: 100 - 240 V, 50 - 60 Hz 9. Precise Temperature Control 10. The Temperature And Run Time Can Be Programmed Individually Upto 4 Temperature Levels And 4 Time Phase In Succession 11. Warranty - 2 Years , Refrigerator ( 2°C-6°C ) Specifications: 1. Capacity: 300 Ltrs ( Double Door ) 2. Material: Stainlees Steel Puf 3. Interior Light 4. Reversible Door Opening 5. Condensation Drain 6. Glass Door 7. Digital Temperature Display 8. For Reagent Storage 6. Voltage: 220 V 7. Warranty: 2 Years , Blood Bag Tube Sealer ( Table Top ) Specification: 1.Blood Bag Tube Sealer Is A Compact Equipment To Seal The Blood Bag Pilot Tube By Radio Frequency Sealing System 2. Should Be Capable Of 750 Seals Per Hour Or 1500 Sealing Per Charge Battery. Capable Of Sealing Tubes Of Various Manufacturers Of Blood Bag. 3. Should Be For Table Top Use. 4. The Sealing Time Should Be Adjustable Between 0.5-5 Seconds 5. Sealing Triggering Should Be Automatic 6. Should Detect Wet Tubes, Leakage Or Any Sealing Defect. 7. Should Have Indication Lamps For “Sealing Process” On Handle As Well As Main Unit And Led To Show The Battery Test. 8. No Warm-Up Time Should Be Required. 9. Should Ensure Easy Separation Of Tube Segments After The Sealing. Should Have Separable Rupture Line. 10. System Should Run On Both Mains And Battery ( More Than 10Hrs. Back Up When Fully Charged ) . 11. Should Be Light Weight Less Than 3 Kg With Carry Bag. 12. Warranty: 2 Years , Elisa Reader Specification: 1. Elisa Plate Reader With Washer Is Required To Read The Color Density Known As Od ( Optical Density ) In Elisa Plates. 2. Should Read Within 6-8 Seconds 3. The Control Panel Should Have Soft Colored Touch Screen Display, Capable Of Showing Graph Etc. 4. Should Have External & Internal Programmable Time & Speed Shaking 5. Should Be Able To Read All Types Of Plates 6. Should Have A Single Halogen Lamp With Save Features As Light Source 7. Should Have User Defined Programmes 30 Or More. 8. Rs232 / Usb Output For Printer, Pc Connectivity And Data Acquisition Should Be There 9. Inter Phasing Software Compatible With Common Os Should Be Supplied 10. Should Have Data Memory Of 300 Plates. 11. Warranty: 2 Years , Note: 1.*Samples For Kits, Reagents And Consumables Marked With Star ( * ) / Brochure Listing Product Details / Certificate Certifying Compliance To Specifications Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender. 2. #Samples For Kits, Reagents And Consumables Marked With Star ( # ) , Distributor Authorization Letter From The Manufacturer Should Be Provided To The Dept. Of Transfusion Medicine, Jipmer Within One Week Afterdisplay Of Successful Bidders In E- Tender. 3. In Case Of Non-Receipt Of Samplesas Specifed For Above Within One Week After Display Of E-Tender, An E-Mail Remainder ( Mentioned In Tender Form ) Will Be Sent To Supply The Same. In Case Of Non Receipt Of Sampleswithin One Week Of Reminder The Bidding Will Automatically Stands Canceled. Only Bidders Who Have Provides Samples Will Be Taken For Final Evaluation 4. Selection Will Be Made Only After Evaluation Of Samples / Brochure, Certificate / Demonstration Etc.