Military Engineer Services-MES has published Repair Maintenance Of Lt Oh Lines Panels Switch Gears Like Apfc Panels And Ug Cables Including All Connected Works And Repair Maintenance Work Of External Water Supply Day To Day Complaints For Bldgs At Varunapuri Dcra Uwr Dad Bldgs Under Age Em Ii 8455 /. Submission Date for this Tender is 31-05-2022. Switch Gear Tenders in vasco Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-May-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 31-05-2022 |
| 2 | 31-May-2022 | Due Date Extended - (31-05-2022) | Admin Corrigendum Date Extend | 01-06-2022 |
| Sl. No. | Item Description |
| 1 | REPAIR / MAINT OF LT OH LINES, PANELS, SWITCH GEARS LIKE APFC PANELS & UG CABLE INCLUDING ALL CONNECTED WORKSUNDER AGE EM-II OF GE (NW) VASCO |
| 2 | Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/disintegrated rock getting out and levelling of bottom surface to required level . |
| 3 | Removing excavated material of soils from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point. |
| 4 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick. |
| 5 | Material & Labour for LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade 120 Sq mm, 3½ core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) completeincluding taking down old unserviceable as specified. |
| 6 | All as per item No 1.04 here in befor but of size 185 sqmm |
| 7 | All as per item No 1.04 here in befor but of size 240 sqmm |
| 8 | All as per item No 1.04 here in befor but of size 95 sqmm |
| 9 | All as per item No 1.04 here in befor but of size 70 sqmm |
| 10 | Material & Labour for Clear Sand for cushioningunder ground cable 8 cm below and 15 cm above in trenches / cable duct filling complete in level all as specified. |
| 11 | Material & Labour for Un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm in trenches for protect to under ground cable complete. |
| 12 | Supply, install, testing and Commissioning of APFC Panel of capacity 150 KVAR with relay 06 step auto/manual operation suitable for improving PF up to unity Double door typePanel factory made, CPRI approved, Outdoor Type, Weather, Dust and vermin Proof, fabricated Of 3 mm thick CRCA sheet (size not less than 1200x1000x500mm), Duly Powder Coated with 7 Tanks Process with Metalized Poly Propylene (MPP) type capacitor bank heavy duty of 150 KVAR with variable correction with Copper Bus Bar of suitable size and mounted on M.S. Angle Frame of 50x50x6mm with Double Door and Locking arrangement to facilitate easy Maintenance with, IP 52 protection cable alley, cable entry hole at the bottom and mounting on PCC (1:3:6) platform raised at 30 cm above Floor level with the following Accessories:- |
| 13 | (a) Incommer MCCB 4 pole 415 volts with 320A 4P MCCB 36KA with breaking capacity 36 KA complete -01 Nos (b) Bus bar copper of suitable capacity for phases and neutral -01 Set. (c) Capacitor duty contactor of MOC type of required capacity - 01 Nos (for each capacitor bank) (d) Digital Micro processor based power factor correction Relay of suitable step operation suitable for 150 KVAR capacity of APFC panel- 01 Nos (e) 150 KVAR Capacitor bank consisting of 6 Stage APFCR Relay for controlling variable correction of KVAR of operation including of Capacitors of voltage 450V long life heavy dutytype1 x 10 KVAR + 2x 20 KVAR + 2x 50 KVAR with suitable MCCB Push button and Auto Manual Switch for each Bank as back up protection. (f)DigitalAmmeter with selector switch and CTs of suitable capacity. (g)Digital Voltmeter with selector switch of suitable capacity. |
| 14 | (h) Internal power and control wiring with suitable size of PVC insulated copper wire and LED indicating lamps. (j) Multifunctional Meter WL4410110000– 1no. (k) Indicating Lamps – 3sets. (l) 6 Stage APFCR Relay for controlling variable correction of KVAR. |
| 15 | Supply & Fixingin repairs Manufacture of LT Control panel board Main Distribution Panel, Outdoor Type, Double Door,factory made, fabricated out of 3 mm thick CRCA sheet(size not less than 2500x1000x1000mm) suitable for 3 Phase, 4 wire,415 volts 50 Hz, AC supply, bus bar chamber with Copper bus bar of size (80X10) 1000 Amp rating for 3 phase and neutral4 wire system duly insulated with Powder Coated and mounted on M.S. Angle Frame of 50x50x6mm. Provision for fixing ACB, MCCB, MC/change over swicth / inter connections, common earth bus bar ofGI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley paneland Including 150 KVAR Capacitors Bank etc. with the following incoming and out going accessoriesall as approved andcomprising as under : - Location : New Leading MAP Sub Stn. |
| 16 | Incoming :- (a) 800A 4P ACB CNCS.8W – 1no. Cat no. SL95332 MDO type (b) Multifunctional Meter WL4410110000 – 1no. (c) Indicating Lamps – 3nos. (d) 1000A Copper Bus Bar – 1set. (e) Digital Volt meter 0 - 500V, size 96 x 96 mm square type with selector switch - 01 Set (f) Digital Amp Meter 0 - 400 Amp, size 96x96 mm square type with selector switch - 01 Set. |
| 17 | Outgoing :- (g) 160A 4P MCCB 25KA – 6nos. (h) 200A 4P MCCB 25KA – 5nos. (j) Timer and Contactor for Street Light – 1set. (k) 25KVAR Capacitor MPP Heavy Duty – 6nos. (l) 63A TP MCB, Capacitor Duty Contactor, Auto Manual Switch, Push Button. (k) APFCR Rely 8 stages for controlling variable correction of KVAR (l) Material & Labour for necessary fixing arrangements by drilling and provn of fdn bolts in the existing floor complete - 01 job |
| 18 | Supply & Fixingin repairsLT Control panel board, outdoor type,double door, floor mounted, overall size not less than 1200 x 1000 x 400 mm, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheetsuitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of200 Amp rating for 3 phase and neutral4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Setincl necessary copper cables of suitable size for MCCBs/MCBs / change over swicth / inter connections, common earth bus bar ofGI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coatingin siemens grey colour and provision for the following incoming and out going accessories all as approved andcomprising as under : Location : UWR |
| 19 | Incoming :- a)Provision for MCCB 4 Pole,40 Amp415V - 01 No. b) Multifunctional Meter WL4410110000 - 01 No. e) Indicator Lamps (LED type) showing R,Y, B phase - 01 set. Outgoing :- (a) 32A TPN MCB – 3nos. (b) 20A TPN MCB – 1no. (c) 20A DP MCB – 1no. d) Timer & Contactor 20A TP for Street Lighting e) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legsand made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No. f) Material & Labour for necessary grouting as reqd PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 job |
| 20 | Material & Labour for LT heat shrinkable cable Jointing kit suitable for 3.5 core 70 to 150 Sqmm aluminium cable all as directed. |
| 21 | Material & Labour for LT heat shrinkable cable Jointing kit suitable for 3.5 core 185 to 300 Sqmm aluminium cable all as directed. |
| 22 | Material & Labour for removing vegitation, grass, scrubs and bushes or any small tree branches growing in Sub station yard along with fancing, around the pole, under the HT / LT transmission lines, yards or any description by mannually / mechanically and keep the sub station yard neat and clean complete all as specified and as directed. Note :- Unit rate quoted deemed to include to keep the installation neat and clean through out the period of contract and each cleaning will be measured and paid separately. |
| 23 | Material & Labour for Cutting and trimming of tree branches 3 mtr all around of any size obstructing lumination of street light and touching LT / HT Over head line incl removing trimmed tree branches all as directed. |
| 24 | Material & Labour for Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to GI strip 32x 6 mm thick dia by mens of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I Connected to earthing ten point all as specified and including necessary earth pit PCC 1:3:6 chanber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials. |
| 25 | Supply & Fixingin repairs Galvanised iron strip 32 x 6 mm buried in ground / fixed on walls / ceilings by using suitable size GI saddles etc incl taking out old one all as specified. |
| 26 | Supply and fix or laying in trenches / on wall / poles / structures in repairs GItubing light grade for road crossing for cable protection of the following sizes including necessary suitable size MS flat fixing clamps, fixing screws complete all as directed. |
| 27 | (a)50 mm dia |
| 28 | (b)40 mm dia |
| 29 | REPAIR/ MAINTENANCE WORKOF EXTERNAL WATER SUPPLY DAY TO DAY COMPLAINTS FOR BIDGS AT VARUNAPURI, DCRA, UWR, DAD BLDGS UNDER AGE E/M -II OF GE (NW) VASCO. |
| 30 | Labour only for Attending day to day external water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, less/no water supply including noting the complaints in complaint register complete all as specified and as directed. Note :- Material required for attending complaints shall bemeasured & paid separately under respective items here-in-after. |
| 31 | Notes for Srl No. 1 :-The rates quoted by the contractor shall also deemed to be included for the following :- (i)The complaints shall be attended and the defects shall be rectified by a team of One Experienced Plumber assisted with two helper, matriculation passedqualified having minimum 03 years experience . (ii) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 500/- per complaint per day (08 hrs) shall be levied upon/imposedon the contractor and recovery shall be made from Contractor"s dues. (iii) In case , after checking & attending the defect,if it is not possible to rectify the defect within 08 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep. IfEngineer-in- charge is satisfied with contractor"s view, no recovery will be made. |
| 32 | (iv)While attending the complaint if earth workis required then the same shall be measured and paid seperately under appropriate itemof Sch "A"/BOQ.However no extra payments shall be made for dewatering. (v) Cutting of GI pipe in position and threadingis also deemed to be included in the job quoted rates (Fittings and fixtures shall be measured and paid separetely under respective items of Sch A/BOQ). (vi)All T&P required for attending the complaints shall be provided by the contractor without any extra. (vii) The pipe fitter shall always be in possession of die set complete with cutters,Taps, Pipe wrench ,Chain wrench, Caulking tools, complete set of spanners and ladders etc..,asrequired at site. |
| 33 | Supply only GI Socket, medium grade, ISI Markedcomplete all as specified and as directed of following sizes. |
| 34 | GI Socket 15 mm bore |
| 35 | GI Socket 20 mm bore |
| 36 | GI Socket 25 mm bore |
| 37 | GI Socket 40 mm bore |
| 38 | GI Socket 50 mm bore |
| 39 | Supply only GI Elbow, medium grade, ISI Marked complete all as specified and as directed of following sizes. |
| 40 | GI Elbow 15 mm bore |
| 41 | GI Elbow 20 mm bore |
| 42 | GI Elbow 25 mm bore |
| 43 | GI Elbow 40 mm bore |
| 44 | GI Elbow 50 mm bore |
| 45 | Supply only GI Union, medium grade, ISI Marked complete all as specified and as directed of following sizes. |
| 46 | GI Union 15 mm bore |
| 47 | GI Union 20 mm bore |
| 48 | GI Union 25 mm bore |
| 49 | GI Union 40 mm bore |
| 50 | GI Union 50 mm bore |
| 51 | Supply only GI Nipple of different length as per requirement, both end screwed medium grade, ISI Marked complete all as specified and as directed of following sizes. |
| 52 | GI Nipple 15 mm bore |
| 53 | GI Nipple 20 mm bore |
| 54 | GI Nipple 25 mm bore |
| 55 | GI Nipple 40 mm bore |
| 56 | GI Nipple 50 mm bore |
| 57 | Supply only GI reducing socket, medium grade, ISI Marked complete all as specified and as directed of following sizes. |
| 58 | GI reducing socketsize 20 x15 mm bore |
| 59 | GI reducing socketsize 25 x15 mm bore |
| 60 | GI reducing socketsize 25 x20 mm bore |
| 61 | GI reducing socketsize 50 x40 mm bore |
| 62 | Supply only GITee, Medium Grade, complete all as specified and as directed of following sizes |
| 63 | GITee , 15 x 15 x 15mm bore |
| 64 | GITee , 20 x 20 x 15mm bore |
| 65 | GITee , 20 x 20 x 20mm bore |
| 66 | GITee , 25 x 25 x 15mm bore |
| 67 | GITee , 25 x 25 x 20mm bore |
| 68 | GITee , 25 x 25 x 25mm bore |
| 69 | GITee , 40 x 40 x 20mm bore |
| 70 | GITee , 40 x 40 x 25mm bore |
| 71 | GITee , 40 x 40 x 40mm bore |
| 72 | GITee , 50 x 50 x 20mm bore |
| 73 | GITee , 50 x 50 x 25mm bore |
| 74 | GITee , 50 x 50 x 40mm bore |
| 75 | GITee , 50 x 50 x 50mm bore |
| 76 | Supply only GIplug, solid, heavy duty, complete all as specified and as directed of following sizes. |
| 77 | GIplug, 15 mm bore |
| 78 | GIplug, 20 mm bore |
| 79 | GIplug, 25 mm bore |
| 80 | GIplug, 40 mm bore |
| 81 | GIplug, 50 mm bore |
| 82 | Supply Only PVC "L" type holder, suitable for aluminium rod, float ball, of following size borecomplete all as specified and as directed. |
| 83 | 15 mm bore |
| 84 | 20 mm bore |
| 85 | 25 mm bore |
| 86 | 40 mm bore |
| 87 | Supply only PTMTfloat valve, Sizes as under, with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed. |
| 88 | PTMT float valve, 15 mm bore |
| 89 | PTMT float valve, 20 mm bore |
| 90 | PTMT float valve, 25 mm bore |
| 91 | PTMT float valve, 40 mm bore |
| 92 | Supply only Gun metal gate valve, with iron wheel head screwed both ends for iron pipe as per IS-778 and fixed including taking out unserviceable one, complete all as specified and as directed of following sizes. |
| 93 | Gun metal gate valve, 15 mm bore |
| 94 | Gun metal gate valve, 20 mm bore |
| 95 | Gun metal gate valve, 25 mm bore |
| 96 | Gun metal gate valve, 40 mm bore |
| 97 | Gun metal gate valve, 50 mm bore |
| 98 | Supply Only lead pig bar complete all as specified and as directed. |
| 99 | Supply Only Lead wool complete all as specified and as directed. |
| 100 | Supply and fixing in replacement 25 to 150 mm long, 6 to 20 mm dia nuts, bolts & washers complete all as specified and as directed. |
| 101 | Taking up or down GI steel tubing of following sizes with connections from Trenches / floors / walls including cleaning for refixing or removal complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely. |
| 102 | 15 mm bore |
| 103 | 20 mm bore |
| 104 | 25 mm bore |
| 105 | 40 mm bore |
| 106 | 50 mm bore |
| 107 | Refixing/ relaying, jointing and testing old GI steel tubing of following sizes, retrieved under srl No 16 here-in-beforein new or old position at walls,ceiling or floor etc including cleaning or rerunning the old screw threads, with & including providing new GI fittings complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely. |
| 108 | 15 mm bore |
| 109 | 20 mm bore |
| 110 | 25 mm bore |
| 111 | 40 mm bore |
| 112 | 50 mm bore |
| 113 | Laying only of GI steel tubing medium grade of following size in old or new position as in trenches/ceiling/walls/Floors with necessary fixing arrangements and including providing new GI fittingscomplete all as specified and as directed. Note :-(i) Excavation for new location shall be measured & paid separetely. (ii) GI Steel tubing shall be issued under schedule "B" free for Fixing. (iii) GI fittings should be measured and paid under respective items. |
| 114 | 15 mm bore |
| 115 | 20 mm bore |
| 116 | 25 mm bore |
| 117 | 40 mm bore |
| 118 | 50 mm bore |
| 119 | Cutting and screwing the existing steel tubing of following size bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed. |
| 120 | 15 mm bore |
| 121 | 20 mm bore |
| 122 | 25 mm bore |
| 123 | 40 mm bore |
| 124 | 50 mm bore |
| 125 | Taking up or down CI/DI Pipe of following sizes including all fittings) with spigot and socketed endsand lead tyton joints includingburning out lead joints and recovering lead and including cleaning for refixing or removal complete all as specified and as directed. Note:- Excavation & earth work shall be measured & paid separetely. |
| 126 | 100 mm bore |
| 127 | 150 mm bore |
| 128 | 200 mm bore |
| 129 | Supply, laying, jointing and testing in trenches DI pipes class K-9 of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement morter cutting and external surface with bituminious paint ISI marked for followibng sizes all as specified & directed.laid in trenches complete :- |
| 130 | 100 mm bore |
| 131 | 150 mm bore |
| 132 | 200 mm bore |
| 133 | Material and Labour for CI/DIfittings/specials such as Tees of any size and radious, bends, collars, tapers, tail pieces,caps and plugs up to 150 mm bore complete all as specified and directed by Engg-in-charge. |
| 134 | Material and Labour for CI/DI fittings/specials such as Tees of any size and radious, bends, collars, tapers, tail pieces,caps and plugs from 200 to 300 mm bore complete all as specified and directed by Engg-in-charge. |
| 135 | Opening of existing sluice valve including opening of gland cover taking out with stem nut of brass or of stainless steel & refexing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed of following sizes. Note:- Spare parts under relevant items shall be measured and paid separately under respective items. |
| 136 | 100 mm bore |
| 137 | 150 mm bore |
| 138 | 200 mm bore |
| 139 | Supply only "stem" made out from stainless steel of sluice valve of following sizes, complete all as specified and as directed. |
| 140 | Stem, 100 mm bore |
| 141 | Stem, 150 mm bore |
| 142 | Stem, 200 mm bore |
| 143 | Supply only "Stem Nut" made out from stainless steel suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed. |
| 144 | Stem Nut, 100 mm bore |
| 145 | Stem Nut, 150 mm bore |
| 146 | Stem Nut, 200 mm bore |
| 147 | Supply only "Gland Plate" made out from Cast Iron suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed. |
| 148 | Gland Plate, 100 mm bore |
| 149 | Gland Plate, 150 mm bore |
| 150 | Gland Plate, 200 mm bore |
| 151 | Supply only 15 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, forpipe of size 15 mm bore complete all as specified and as directed. |
| 152 | Material & Labour for Rubber Gasket joint(Tyton) including jointing material for CI/DI Pipe of following sizes complete all as specified and as directed . |
| 153 | 100 mm bore |
| 154 | 150 mm bore |
| 155 | 200 mm bore |
| 156 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorscomplete all as specified with all fitting (union, elbow, socket) of the following sizes :- |
| 157 | (a)25mm bore size |
| 158 | (b)20 mm bore size |
| 159 | Supply andfixingrotational moulded polyethylene water storage tank, cylindrical vertical with closed top,500 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed. |
| 160 | Supply andfixingrotational moulded polyethylene water storage tanks, cylindrical vertical with closed top, 1000 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity)complete all as specified and as directed. |
| 161 | Excavation in trenches not exc 1.5 M wide and not exc 1.5 M indepth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level all as specified and as directed. |
| 162 | All as per Item No.3.26 above but in soft disintegreted rock/ laterite rock. |
| 163 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed. |
| 164 | Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed. |
| 165 | Surface dressing of uneven surfaces of natural ground, rough excavated surfaces not exceeding 15 cm deep and filled area where ordered shall be trimmed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to given an even and neat look to the site. complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
