Supply Of 1.1 Cum Container Dustbin Sbm For Municipal Counicil Jhunjhunu Supply Of 1.1 Cum Container Dustbin Sbm For Municipal Counicil Jhunjhunu , Supply Of 1.1 Cum Container ( Dustbin ) Container Size ( Rectangular ) Made Of Above 1.6 Mm ( All Over

Sharing tender

Supply Of 1.1 Cum Container Dustbin Sbm For Municipal Counicil Jhunjhunu Supply Of 1.1 Cum Container Dustbin Sbm For Municipal Counicil Jhunjhunu , Supply Of 1.1 Cum Container ( Dustbin ) Container Size ( Rectangular ) Made Of Above 1.6 Mm ( All Over ) , Average Weight 145-150 Kg , Logo Written Work- Sbm Logo Nagar Parishad Jhunjhunu To Be Written On Containers With Numberingbody Fabrications - The Entire Gi Sheet Shall Be Riveted With The Solid Rivet Of Aluminum / Gi Nut Bolt Of Suitable Size No Welding Will Allow On Gi Sheet Except Hooks And Handlescontainers Support Leg ( 04Nos ) - Minimum ( 120-130 ) Mm Long And Minimum 70Mm Dia. Gi Pipe With Capped 3 Mm Thick Ms Plate G.I. Frame Angle Size For Top & Bottom ( As Required ) - 50X50x5mmg.I. Side Frame Vertical Angle Size ( 4Nos ) 50X50x5 Mm Lifting Pins ( M.S. ) Size ( 2Nos ) Minimum 45 Mm Dia Pipe Of Thickness 4Mm Having Length ( 120-130 ) Mm Bottom Hole- Minimum 10 No Hole Of 30 Mm Dia Outside Extra Horizontal Support ( 6No. ) 50X50x5 Mm Sizeadditional Horizontal Support ( Inside Channel For Lifting Pins & Bottom ( 6No ) 100X50mm Container Should Be Cleaned Properly Prior To Coating / Painting. The Containers To Be Coated With Two Coat Anticorrosive Red-Oxide Primer And One Coat Of Silver Enamel Paint Lid Of The Containers Should Be Made In Two Pieces By 1.0 Mm Thick Ms Sheet And Supported By At Least 3 Nos. Hinges In Each Piece. Lids Shall Be Supported By 25X3 Mm Angles Frame Inside Or By Corrugation Of Sheet.