Fixing Of Rate Contract For Repairs To Mechanical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Sopore ( District Baramulla And Bandipore ) For One Financial Year I.E., 2022-23 - 1 Repairs To Multi Stage Bowl Vt Pump , sopore-Jammu And Kashmir

Fixing Of Rate Contract For Repairs To Mechanical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Sopore ( District Baramulla And Bandipore ) For One Financial Year I.E., 2022-23 - 1 Repairs To Multi Stage Bowl Vt Pump Of Bowl Having Inside Diameter 250Mm And Above.Dismantling Of The Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items. 2 Line Shaft ( Finished ) Out Of Ss-410 Material As Per Sample 3 Head Shaft ( Finished ) Out Of Ss-410 Material As Per Sample 4 Bowl Shaft ( Finished ) Out Of Ss-410 Material As Per Sample 5 Rubber Liner Cente Kit Bush 6 Muff Coupling ( Finished ) Out Of Ss-400 Material As Per Sample 7 Gun Metal Gland Bush ( Finished ) As Per Sample 8 Ms Gland ( Finished ) As Per Sample 9 Facing / Treatment Of Bowel Stage And Impeller For Proper Fitment Of Wearing Ring 10 Gm Wearing Ring ( Finished ) As Per Sample 11 Cooling Ring ( Finished ) As Per Sample 12 Repairs To Gland Box By Way Of Removing Of Damaged Studs And Providing And Fitting Of New Studs As Per Sample 13 Re-Matteling Of Bearing Seats And Coupling Seat Then Turing And Finishing To Size And Shape 14 Check Nut ( Finished ) As Per Sample 15 Ball Bearing No: 6318 After Removing Old Damaged Bearing By Skilled Labours And Tools / Tackles. 16 Repairs To Multi Stage Bowl Vt Pump Of Bowl Having Inside Diameter From 100Mm Upto Less Than 150Mm Diameterdismantling Of The Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items. 17 Line Shaft ( Finished ) Out Of Ss-410 Material As Per Sample 18 Head Shaft ( Finished ) Out Of Ss-410 Material As Per Sample 19 Bowl Shaft ( Finished ) Out Of Ss-410 Material As Per Sample 20 Rubber Liner Cente Kit Bush 21 Muff Coupling ( Finished ) Out Of Ss-400 Material As Per Sample 22 Gun Metal Gland Bush ( Finished ) As Per Sample 23 Ms Gland ( Finished ) As Per Sample 24 Facing / Treatment Of Bowel Stage And Impeller For Proper Fitment Of Wearing Ring 25 Gm Wearing Ring ( Finished ) As Per Sample 26 Cooling Ring ( Finished ) As Per Sample 27 Repairs To Gland Box By Way Of Removing Of Damaged Studs And Providing And Fitting Of New Studs As Per Sample 28 Re-Matteling Of Bearing Seats And Coupling Seat Then Turing And Finishing To Size And Shape 29 Check Nut ( Finished ) As Per Sample 30 Repairs To Multi Stage Bowl Vt Pump Of Bowl Having Inside Diameter From 150Mm Upto Less Than 250Mm Diameterdismantling Of The Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items. 31 Line Shaft ( Finished ) Out Of Ss-410 Material As Per Sample 32 Head Shaft ( Finished ) Out Of Ss-410 Material As Per Sample 33 Bowl Shaft ( Finished ) Out Of Ss-410 Material As Per Sample 34 Rubber Liner Cente Kit Bush 35 Muff Coupling ( Finished ) Out Of Ss-400 Material As Per Sample 36 Gun Metal Gland Bush ( Finished ) As Per Sample 37 Ms Gland ( Finished ) As Per Sample 38 Facing / Treatment Of Bowel Stage And Impeller For Proper Fitment Of Wearing Ring 39 Gm Wearing Ring ( Finished ) As Per Sample 40 Cooling Ring ( Finished ) As Per Sample 41 Repairs To Gland Box By Way Of Removing Of Damaged Studs And Providing And Fitting Of New Studs As Per Sample 42 Re-Matteling Of Bearing Seats And Coupling Seat Then Turing And Finishing To Size And Shape 43 Check Nut ( Finished ) As Per Sample 44 Ball Bearing No: 6318 After Removing Old Damaged Bearing By Skilled Labours And Tools / Tackles. 45 Repairs To Horizontal Pump With Discharge ( From And Above 5000Gph But Less Than 8000 Gph ) And Head ( From And Above 30M But Less Than 50M ) Dismantling Of The Horizontal Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 46 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 47 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 48 Fabrication Providing And Fitting Of Split Type Ms Gand ( Finished ) 49 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 50 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 51 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 52 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 53 Providing And Fitting Of Metallic Palmative Packing 54 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 55 Fabrication Providing And Fitting Of Impeller Check Nut ( Gm ) 56 Fabrication Providing And Fitting Of Impeller Check Nut ( Ms ) 57 Fabrication Providing And Fitting Of Shaft Sleeve Finished Out Of Ss 58 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 59 Repairs To Horizontal Pump With Discharge ( From And Above 8000Gph But Less Than 15000 Gph ) And Head ( From And Above 30M But Less Than 50M ) Dismantling Of The Horizontal Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 60 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 61 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 62 Fabrication Providing And Fitting Of Split Type Ms Gand ( Finished ) 63 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 64 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 65 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 66 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 67 Providing And Fitting Of Metallic Palmative Packing 68 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 69 Fabrication Providing And Fitting Of Impeller Check Nut ( Gm ) 70 Fabrication Providing And Fitting Of Impeller Check Nut ( Ms ) 71 Fabrication Providing And Fitting Of Shaft Sleeve Finished Out Of Ss 72 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 73 Repairs To Horizontal Pump With Discharge ( From And Above 90000Gph But Less Than 100000 Gph ) And Head ( From And Above 30M But Less Than 80M ) Dismantling Of The Horizontal Pumping Unit At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 74 Fabrication, Providing And Fitting Of Wear Ring ( Finished ) As Per Sample 75 Fabrication, Providing And Fitting Of Gm Bush ( Finished ) As Per Sample 76 Fabrication Providing And Fitting Of Split Type Ms Gand ( Finished ) 77 Remetalling Of Wear Ring Seats, Then Finishng To Size For Proper Fitment Of Wear Ring 78 Remetalling Of Bearing Seats, And Finishing To Size For Proper Fitment Of Bearings 79 Remetalling Of Pump Shaft And Finishing To Size For Proper Fitment Of Bearings 80 Fabrication Providing And Fitting Of Pump Shaft ( Finished ) Out Of Ss-410 Material, As Per Sample. 81 Providing And Fitting Of Metallic Palmative Packing 82 Providing And Fitting Of Rubber Seal For Air Tight Fitting Of Split Parts Of The Pump As Per Sample 83 Fabrication Providing And Fitting Of Impeller Check Nut ( Gm ) 84 Fabrication Providing And Fitting Of Impeller Check Nut ( Ms ) 85 Fabrication Providing And Fitting Of Shaft Sleeve Finished Out Of Ss 86 Fabrication And Fiting Of Coupling Key / Cotter ( Finished ) As Per Sample 87 Providing And Filling Of M-Oil For Bearing Housing 88 Repairs To Submeribsle Pump With Discharge ( From And Above 1000Gph But Less Than 3000 Gph ) And Head ( From And Above 30M But Less Than 100M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 89 Replacement Of Impeller 90 Bronze 91 Cast Steel / Stainless Steel. 92 Noryl 93 Replacement Of Diffuser 94 Bronze 95 Cast Steel / Stainless Steel. 96 Noryl 97 Replacement Of Pump Bowl 98 Fabrication, Providing And Fitting Of Pump Shaft 99 Replacement Of Cast Iron Non Return Valve Shaft 100 Replacement Of Stain Less Steel Strainers 101 Replacement Of Cast Iron Threaded Discharge Outlet 102 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 103 Bronze 104 Cast Steel / Stainless Steel. 105 Noryl 106 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 107 50 Mm Dia 108 65 Mm Dia 109 80 Mm Dia 110 100 Mm Dia 111 Fabrication, Providing And Fitting Of Locking Arrangment 112 Repairs To Submeribsle Pump With Discharge ( From And Above 1000Gph But Less Than 3000 Gph ) And Head ( From And Above 100M But Less Than 200M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 113 Replacement Of Impeller 114 Bronze 115 Cast Steel / Stainless Steel. 116 Noryl 117 Replacement Of Diffuser 118 Bronze 119 Cast Steel / Stainless Steel. 120 Noryl 121 Replacement Of Pump Bowl 122 Fabrication, Providing And Fitting Of Pump Shaft 123 Replacement Of Cast Iron Non Return Valve Shaft 124 Replacement Of Stain Less Steel Strainers 125 Replacement Of Cast Iron Threaded Discharge Outlet 126 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 127 Bronze 128 Cast Steel / Stainless Steel. 129 Noryl 130 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 131 50 Mm Dia 132 65 Mm Dia 133 80 Mm Dia 134 100 Mm Dia 135 Fabrication, Providing And Fitting Of Locking Arrangment 136 Repairs To Submeribsle Pump With Discharge ( From And Above 3000Gph But Less Than 7000 Gph ) And Head ( From And Above 30M But Less Than 100M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 137 Replacement Of Impeller 138 Bronze 139 Cast Steel / Stainless Steel. 140 Noryl 141 Replacement Of Diffuser 142 Bronze 143 Cast Steel / Stainless Steel. 144 Noryl 145 Replacement Of Pump Bowl 146 Fabrication, Providing And Fitting Of Pump Shaft 147 Replacement Of Cast Iron Non Return Valve Shaft 148 Replacement Of Stain Less Steel Strainers 149 Replacement Of Cast Iron Threaded Discharge Outlet 150 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 151 Bronze 152 Cast Steel / Stainless Steel. 153 Noryl 154 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 155 50 Mm Dia 156 65 Mm Dia 157 80 Mm Dia 158 100 Mm Dia 159 Fabrication, Providing And Fitting Of Locking Arrangment 160 Repairs To Submeribsle Pump With Discharge ( From And Above 3000Gph But Less Than 7000 Gph ) And Head ( From And Above 100M But Less Than 200M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 161 Replacement Of Impeller 162 Bronze 163 Cast Steel / Stainless Steel. 164 Noryl 165 Replacement Of Diffuser 166 Bronze 167 Cast Steel / Stainless Steel. 168 Noryl 169 Replacement Of Pump Bowl 170 Fabrication, Providing And Fitting Of Pump Shaft 171 Replacement Of Cast Iron Non Return Valve Shaft 172 Replacement Of Stain Less Steel Strainers 173 Replacement Of Cast Iron Threaded Discharge Outlet 174 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 175 Bronze 176 Cast Steel / Stainless Steel. 177 Noryl 178 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 179 50 Mm Dia 180 65 Mm Dia 181 80 Mm Dia 182 100 Mm Dia 183 Fabrication, Providing And Fitting Of Locking Arrangment 184 Repairs To Submeribsle Pump With Discharge ( From And Above 7000Gph But Less Than 12000 Gph ) And Head ( From And Above 30M But Less Than 100M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 185 Replacement Of Impeller 186 Bronze 187 Cast Steel / Stainless Steel. 188 Noryl 189 Replacement Of Diffuser 190 Bronze 191 Cast Steel / Stainless Steel. 192 Noryl 193 Replacement Of Pump Bowl 194 Fabrication, Providing And Fitting Of Pump Shaft 195 Replacement Of Cast Iron Non Return Valve Shaft 196 Replacement Of Stain Less Steel Strainers 197 Replacement Of Cast Iron Threaded Discharge Outlet 198 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 199 Bronze 200 Cast Steel / Stainless Steel. 201 Noryl 202 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 203 50 Mm Dia 204 65 Mm Dia 205 80 Mm Dia 206 100 Mm Dia 207 Fabrication, Providing And Fitting Of Locking Arrangment 208 Repairs To Submeribsle Pump With Discharge ( From And Above 7000Gph But Less Than 12000 Gph ) And Head ( From And Above 100M But Less Than 200M ) Dismantling Of The Submersible Pump At Site, Shifting To The Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successfull Testing On Full Load. Job Includes Repairing / Fabrication And Providing / Replacement Of Following Items 209 Replacement Of Impeller 210 Bronze 211 Cast Steel / Stainless Steel. 212 Noryl 213 Replacement Of Diffuser 214 Bronze 215 Cast Steel / Stainless Steel. 216 Noryl 217 Replacement Of Pump Bowl 218 Fabrication, Providing And Fitting Of Pump Shaft 219 Replacement Of Cast Iron Non Return Valve Shaft 220 Replacement Of Stain Less Steel Strainers 221 Replacement Of Cast Iron Threaded Discharge Outlet 222 Replacement Of Bowl Stage Bushes For Fitment Of Impellers 223 Bronze 224 Cast Steel / Stainless Steel. 225 Noryl 226 Fabrication, Providing, Fitting Of Ms Nipples Threaded On One Side And Flanged On Other Side ( With Thickness Of Pipe And Flange As Per Head ) 227 50 Mm Dia 228 65 Mm Dia 229 80 Mm Dia 230 100 Mm Dia 231 Fabrication, Providing And Fitting Of Locking Arrangment 232 Repairs To The Rising Main For Plugging The Openings / Cracks Etc. By Way Of Using Dg Set And Welding Set At Site Including Following Series Of Works. 233 Cost On Account Of Making Proper Groove To The Leak Spot By Using Grinder At Site. 234 Cost On Account Of Providing Of Ms Plate As Required At Site 235 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 236 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 237 Repairs To The Non-Rising Spindle Sluice Valve Of Size 80Mm And 100 Mm Diameter Including Following Series Of Works.Dismantling Of The Sluice Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 238 Dismantling The Sluive Valve For Checking Inner Parts 239 Fabrication, Providing And Fitting Of Spindle Out Of Ms Shaft, Which Include Cutting Of Threads, Turning Etc. As Per The Sample 240 Fabrication, Providing And Fitting Of Check Nut As Per Sample 241 Fabrication, Providing And Fitting Of Flap 242 Cost On Account Of C.I. Welding 243 Repairs To The Non-Rising Splidle Sluice Valve Of Size 125Mm And 150 Mm Diameter Including Following Series Of Works.Dismantling Of The Sluice Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 244 Dismantling The Sluive Valve For Checking Inner Parts 245 Fabrication, Providing And Fitting Of Spindle Out Of Ms Shaft, Which Include Cutting Of Threads, Turning Etc. As Per The Sample 246 Fabrication, Providing And Fitting Of Check Nut As Per Sample 247 Fabrication, Providing And Fitting Of Flap 248 Cost On Account Of C.I. Welding 249 Repairs To The Non-Rising Spindle Sluice Valve Of Size More Than 150 Mm Diameter Includingfollowing Series Of Worksdismantling Of The Sluice Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 250 Dismantling The Sluice Valve For Checking Inner Parts 251 Fabrication, Providing And Fitting Of Spindle Out Of Ms Shaft, Which Include Cutting Of Threads, Turning Etc. As Per The Sample 252 Fabrication, Providing And Fitting Of Check Nut As Per Sample 253 Fabrication, Providing And Fitting Of Flap 254 Cost On Account Of C.I. Welding 255 Repairs To The Reflex Valve ( Nrv ) Of Size 80Mm And 100Mmdiameter By Way Of Using Dg Set And Welding At Site Including Following Series Of Works.Dismantling Of The Reflex Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 256 Dismantling The Reflexvalve For Checking Inner Parts 257 Fabrication Providing And Fitting Of Flap Of Size And Thickness Asper Sample 258 Making Of Flap Seat To Make It Proper Effective 259 Providing And Fitting Of Jain As Per Sample 260 Providing And Fitting Of Nuts And Bolts As Required 261 Making Of Hings For Perfect Movement Of The Flap 262 Making And Fitting Of Hinge Spindle As Per Sample 263 Cutting Of Rising Main For Dismantling Of The Valve And Refitting In The Rising Main After Proper Insertion Of The Rubber Washer To Make The Rising Main Leak Proof At The Flange Joints 264 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 265 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Double Beat ) 266 Repairs To The Reflex Valve ( Nrv ) Of Size 125Mm And 150Mm Diameter By Way Of Using Dg Set And Welding Set At Site Including Following Series Of Works.Dismantling Of The Reflex Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 267 Dismantling The Reflex Valve For Checking Inner Parts 268 Fabrication Providing And Fitting Of Flap Of Size And Thickness Asper Sample 269 Making Of Flap Seat To Make It Proper Effective 270 Providing And Fitting Of Jain As Per Sample 271 Providing And Fitting Of Nuts And Bolts As Required 272 Making Of Hings For Perfect Movement Of The Flap 273 Making And Fitting Of Hinge Spindle As Per Sample 274 Cutting Of Rising Main For Dismantling Of The Valve And Refitting In The Rising Main After Proper Insertion Of The Rubber Washer To Make The Rising Main Leak Proof At The Flange Joints 275 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 276 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Double Beat ) 277 Repairs To The Reflex Valve ( Nrv ) Of Size More Than 150Mmdiameter By Way Of Using Dg Set And Welding Set At Site Including Following Series Of Worksdismantling Of The Reflex Valve From The Rising Main / Delivery Manifold And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 278 Dismantling The Reflex Valve For Checking Inner Parts 279 Fabrication Providing And Fitting Of Flap Of Size And Thickness Asper Sample 280 Making Of Flap Seat To Make It Proper Effective 281 Providing And Fitting Of Jain As Per Sample 282 Providing And Fitting Of Nuts&&Bolts As Required 283 Making Of Hings For Perfect Movement Of The Flap 284 Making And Fitting Of Hinge Spindle As Per Sample 285 Cutting Of Rising Main For Dismantling Of The Valve And Refitting In The Rising Main After Proper Insertion Of The Rubber Washer To Make The Rising Main Leak Proof At The Flange Joints 286 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Single Beat ) 287 Cost On Account Of Welding The Spot To Make It Leak Proof. ( Double Beat ) 288 Repairs To The Foot Valve Of Size 80Mm To 150 Mm Diameter Including Following Series Of Worksdismantling Of The Foot Valve From The Suction Line And Shifting To Workshop And Back To Site After Repairs, Fitting And Successful Testing. Job May Include Series For Follwing Works 289 Dismantling The Foot Valve For Checking Inner Parts 290 Making Of Hings For Perfect Movement Of The Flap 291 Making And Fitting Of Hinge Spindle As Per Sample 292 Cost On Account Of Fabrication, Providing And Fitting Of Strainer Of Proper Size 293 Cost On Account Of Providing And Fitting Of Nuts And Bolts 294 Providing And Fitting Of Rubber Washers 5Mm Thick Compatible For 295 65Mm Dia Pipe Flange 296 80Mm Dia Pipe Flange 297 100Mm Dia Pipe Flange 298 125Mm Dia Pipe Flange 299 150Mm Dia Pipe Flange 300 200Mm Dia Pipe Flange 301 250Mm Dia Pipe Flange 302 Providing And Fitting Of G. I. Bends Compatible For Thickness Between 3Mm To 4.5Mm 303 65Mm 304 80Mm 305 100Mm 306 125Mm 307 150Mm 308 200Mm 309 250Mm 310 300Mm 311 350Mm 312 Providing And Fitting Of G. I. Bends Compatible For Thickness 5Mm Onwards 313 65Mm 314 80Mm 315 100Mm 316 125Mm 317 150Mm 318 200Mm 319 250Mm 320 300Mm 321 350Mm 322 Providing And Fitting Of Thrust Bearings For Deep Well Submersible Pumping Units Compatible For 323 Thrust Base V4 324 Thrust Base V6 325 Thrust Base V8 326 Thrust Pad V4 327 Thrust Pad V6 328 Thrust Pad V8 329 Providing And Fitting Of Side Thrust Bearing For Different Capacity Open Well Submersible Pumping Units ( Horizontal Type ) Compatible For 330 7.5Hp 331 10Hp 332 12.5Hp 333 15Hp And More 334 Providing And Fitting Of Bush Bearing ( De & Nde ) For Different Capacity Open Well Submersible Horizontal Type Pumping Units Compatible For 335 7.5Hp 336 10Hp 337 12.5Hp 338 15Hp And More 339 Providing And Fitting Of Bearing Housings With Gaskets For Different Capacity Motors And Pumps Compatible For 340 No. 6306 341 No. 6308 342 No. 6309 343 No. 6312 344 No. 3206 Double Groove 345 No. 5206 Double Groove 346 No. 6208 347 No. 7309 348 No. 6311 349 No. 6316 350 No. 6318 351 No. 2932 8E 352 No. 29324 353 No. 7210 354 No. 6319C3 355 No. N314 356 No. 7220Becb 357 No. 6310 358 No. 6212 359 No. 6305 360 No. 7312 361 No. 6307 362 Welding In Single Beat At Various Ms Structural Joints Viz, Gantry Joint, Column Joint, Gate Joint, Sheet Joint, Fencing Joint Etc. 363 Replacement Of Gravity To Various Batteries With Charging 364 Mechanical Seal For Vertical Type Open Well Submersible Pumping Units 365 Oil Seal For Oil Cooled Submersible Pumps 366 Water Seal For Oil Cooled Submersible Pumps 367 Balancing Ring For Ows Pumping Units 368 Providing And Fitting Of Ball Valves Of Following Capacities 369 12Mm 370 15Mm 371 25Mm 372 40Mm 373 Replacements Of Chain Pulley Block With 6M Lift And Successful Testing Of Following Capacities 374 01 Ton 375 02 Ton 376 03 Ton 377 05 Ton 378 Providing And Fitting Of Asbestos Gland Packing Of Superior Quality 379 8.5 Mm 380 10 Mm 381 12 Mm 382 16 Mm 383 Providing And Fitting Of Tyre / Rubber Couplings Of Superior Quality 384 Tc-011 385 Tc-012 386 Tc-013 387 Tc-014 388 Tc-016 389 Tc-019 390 Providing And Fitting Of Suction Meshed Strainer For Bowl Dia 391 100Mm 392 125Mm 393 150Mm 394 200Mm 395 250Mm 396 300Mm 397 Providing And Fitting Of Star Couplings Of Superior Quality 398 Assorted Size 399 Repairs To Ms / Gi Rising Main At Damaged Joints By Way Of Excavaton Of Trunches, Cutting Of Both Damaged Flanges, Providing And Fitting Of Socket In Two Halves One From Above And Other On Top By Welding In Two Beats Using Welding, Cutting, Dg Set Along The Contour Of The Rising Main For Making The Leak Proof Solid Joint 400 65Mm 401 80Mm 402 100Mm 403 125Mm 404 150Mm 405 200Mm 406 250Mm 407 300Mm 408 350Mm 409 Repairs To Open Well Submersible Pumping Unit With Discharge From 3000Gph To 10000 Gph, Head From And Above 10M But Less Than 52M With Motor Rating As 1Hp To 7.5Hp 410 Dismantling Of The Open Well Submersible Pumping Unit At Site, Shifting To Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successful Testing On Full Load 411 Complete Rewinding Of The Stator Assembly By Appropriate Gauged Copper Wire 412 Cost On Account Of Labour, Insulted Paper, Sleeves Etc., Used During Rewinding With Testing 413 Cost On Account Of Associated Consumeable Items Like Crimped Paper, Sleeves, Pvc Pipes, Bamboo Sticks, Thread Etc. 414 Replacement Of Stain Less Steel Shaft 415 Replacement Of Cast Iron Impeller 416 Replacement Of Cast Iron Volute Casing 417 Providing And Fitting Of Rubber Oil Seal 418 Providing And Fitting Of Bronze Bushes 419 Providing And Fitting Of Stainless Steel Thrust Pad 420 Providing And Fitting Of Threaded Plastic Strainer 421 Repairs To Open Well Submersible Pumping Unit With Discharge From And Above 10000Gph To 20000 Gph, Head From And Above 10M But Less Than 52M With Motor Rating From And Above 7.5Hp To 15Hp 422 Dismantling Of The Open Well Submersible Pumping Unit At Site, Shifting To Workshop, Repairing, Shifting Back To Site, Re-Fitting And Successful Testing On Full Load 423 Complete Rewinding Of The Stator Assembly By Appropriate Gauged Copper Wire 424 Cost On Account Of Labour, Insulted Paper, Sleeves Etc., Used During Rewinding With Testing 425 Cost On Account Of Associated Consumeable Items Like Crimped Paper, Sleeves, Pvc Pipes, Bamboo Sticks, Thread Etc. 426 Replacement Of Stain Less Steel Shaft 427 Replacement Of Cast Iron Impeller 428 Replacement Of Cast Iron Volute Casing 429 Providing And Fitting Of Rubber Oil Seal 430 Providing And Fitting Of Bronze Bushes 431 Providing And Fitting Of Stainless Steel Thrust Pad 432 Providing And Fitting Of Threaded Plastic Strainer 433 Providing And Fitting Of Ms Couplings For Submersible Pumping Units 434 Providing And Applying Of Grease 435 Providing And Shrouding Of Pea Gravel 5Mm 436 Providing And Shrouding Of Pea Gravel 6Mm 437 Providing And Fitting Of Ball / Thrust Bearing ( De & Nde ) For Different Capacity Motors And Pumps 438 No. 6308 439 No. 6309 440 No. 6312 441 No. 6306 442 No. 3206 Double Groove 443 No. 5206 Double Groove 444 No. 6208 445 No. 7309 446 No. 6311 447 No. 6316 448 No. 6318 449 No. 2932 8E 450 No. 29324 451 No. 7210 452 No. 6319C3 453 No. N314 454 No. 7220Becb 455 No. 6310 456 No. 6212 457 No. 6305 458 No. 7312 459 No. 6307 460 No 29330E Thrust Bearing 461 No. 29322 E Thrust Bearing 462 No 29416 E Thrust Bearing 463 No 6313 464 No 6314 465 No 6315 466 No 6020 467 No. 8321 468 No. 8314 469 No. Nu318c3 470 No. 6321 471 No, Nu309 472 Providing And Fitting Of Ms Flanges 18 Mm-30 Mm Thick By Way Of Arc Welding At Site, Including Dismantling And Testing Of The Joint, Job Includes Providing Of Nuts And Bolts And Ri Cloth 473 65 Mm Dia, 18 Mm Thick 474 80 Mm Dia , 20 Mm Thick 475 100 Mm Dia, 20 Mm Thick 476 125 Mm Dia, 22 Mm Thick 477 150 Mm Dia, 22 Mm Thick 478 200 Mm Dia, 22 Mm Thick 479 250 Mm Dia, 26 Mm Thick 480 300 Mm Dia, 28 Mm Thick 481 350 Mm Dia, 30 Mm Thick 482 Fabrication, Providing And Fitting Of Gland Studs To Horizontal Pumps Upto 12000 Gph 483 Fabrication, Providing And Fitting Of Gland Studs To Horizontal Pumps Upto 90000 Gph 484 Providing And Fitting Of Ci Foot Valves At Site Including Dismatling Of Suction Site , Fitting And Testing Of The Same At Site 485 65 Mm Dia 486 80 Mm Dia 487 100 Mm Dia 488 Fabrication, Providing And Fitting Of Ms Foot Valves At Site Including Dismantling, Fitting And Testing Of The Same At Site ( Including All Accessories ) 489 125 Mm Dia 490 150 Mm Dia 491 200 Mm Dia 492 250 Mm Dia 493 Providing And Fitting Of Flange Rubber Gasket At Site Including Dismantling , Fitting And Successfull Testing 494 65 Mm Dia 495 80 Mm Dia 496 100 Mm Dia 497 125 Mm Dia 498 150 Mm Dia 499 200 Mm Dia 500 250 Mm Dia 501 300 Mm Dia 502 350 Mm Dia 503 Providing , Fitting , Machining Ofc.I Coupling Complete To Horizontal Pumping Units With Allied Accessories 504 11 To 14 No. 505 15 To 18 No. 506 19 No. 507 Providing , Fitting, Machining Of Hollow Shaft Coupling For Hollow Shaft Vt Motors Including Fabrication Of Key 508 15 Hp To 25 Hp 509 30 Hp To 50 Hp 510 60 Hp To 150 Hp 511 220 Hp To 270 Hp 512 Providing , Fitting , Machining Of Solid Shaft Coupling To Pumping Uints 10-12 Size Including All Accessories 513 Providing And Fitting Of Oil Seal To Hollow Shaft Vt Motors 220 Hp To 270 Hp Motor, Including Dismantling Of Bearing And Fitting Of Oil Seal , Fitting Of Thrusht Bearing And Testing At Site On Load. 514 Complete Over Hauling Of The 7.5 / 5 Hp Commpressor Of Pressure Vessel Fitration Plants 515 Providing And Fitting Of Check Nuts For Horizontal Pumping Units As Per Sample

INR 1000 /-

INR 34000.0 /-

INR 17 Lakhs /-

Name of Work:Fixing of rate contract for repairs to mechanical equipment installed at different WSSs of PHE Mechanical Sub-Division Sopore (District Baramulla and Bandipore) for one financial year i.e., 2022-23

Sl. No.	Item Description
1	Repairs to Multi stage bowl VT Pump of bowl having inside diameter 250mm and above. Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
2	Line shaft (finished) out of SS-410 material as per sample
3	Head shaft (finished) out of SS-410 material as per sample
4	Bowl Shaft (finished) out of SS-410 material as per sample
5	Rubber liner cente kit bush
6	Muff coupling (finished) out of SS-400 material as per sample
7	Gun metal gland bush (finished) as per sample
8	MS gland (finished) as per sample
9	Facing /treatment of bowel stage and impeller for proper fitment of wearing ring
10	GM Wearing Ring (finished) as per sample
11	Cooling ring (finished) as per sample
12	Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample
13	Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape
14	Check nut (finished) as per sample
15	Ball bearing No: 6318 after removing old damaged bearing by skilled labours and tools/ tackles.
16	Repairs to Multi stage bowl VT Pump of bowl having inside diameter from 100mm upto less than 150mm diameter Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
17	Line shaft (finished) out of SS-410 material as per sample
18	Head shaft (finished) out of SS-410 material as per sample
19	Bowl Shaft (finished) out of SS-410 material as per sample
20	Rubber liner cente kit bush
21	Muff coupling (finished) out of SS-400 material as per sample
22	Gun metal gland bush (finished) as per sample
23	MS gland (finished) as per sample
24	Facing /treatment of bowel stage and impeller for proper fitment of wearing ring
25	GM Wearing Ring (finished) as per sample
26	Cooling ring (finished) as per sample
27	Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample
28	Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape
29	Check nut (finished) as per sample
30	Repairs to Multi stage bowl VT Pump of bowl having inside diameter from 150mm upto less than 250mm diameter Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
31	Line shaft (finished) out of SS-410 material as per sample
32	Head shaft (finished) out of SS-410 material as per sample
33	Bowl Shaft (finished) out of SS-410 material as per sample
34	Rubber liner cente kit bush
35	Muff coupling (finished) out of SS-400 material as per sample
36	Gun metal gland bush (finished) as per sample
37	MS gland (finished) as per sample
38	Facing /treatment of bowel stage and impeller for proper fitment of wearing ring
39	GM Wearing Ring (finished) as per sample
40	Cooling ring (finished) as per sample
41	Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample
42	Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape
43	Check nut (finished) as per sample
44	Ball bearing No: 6318 after removing old damaged bearing by skilled labours and tools/ tackles.
45	Repairs to horizontal Pump with discharge (from and above 5000GPH but less than 8000 GPH) and head (from and above 30M but less than 50M) Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
46	Fabrication, providing and fitting of wear ring (finished) as per sample
47	Fabrication, providing and fitting of GM bush (finished) as per sample
48	Fabrication providing and fitting of Split type MS gand (finished)
49	Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring
50	Remetalling of bearing seats, and finishing to size for proper fitment of bearings
51	Remetalling of Pump shaft and finishing to size for proper fitment of bearings
52	Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample.
53	Providing and fitting of metallic palmative packing
54	Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample
55	Fabrication providing and fitting of impeller check nut (GM)
56	Fabrication providing and fitting of impeller check nut (MS)
57	Fabrication providing and fitting of shaft sleeve finished out of SS
58	Fabrication and fiting of Coupling key/Cotter (finished) as per sample
59	Repairs to horizontal Pump with discharge (from and above 8000GPH but less than 15000 GPH) and head (from and above 30M but less than 50M) Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
60	Fabrication, providing and fitting of wear ring (finished) as per sample
61	Fabrication, providing and fitting of GM bush (finished) as per sample
62	Fabrication providing and fitting of Split type MS gand (finished)
63	Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring
64	Remetalling of bearing seats, and finishing to size for proper fitment of bearings
65	Remetalling of Pump shaft and finishing to size for proper fitment of bearings
66	Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample.
67	Providing and fitting of metallic palmative packing
68	Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample
69	Fabrication providing and fitting of impeller check nut (GM)
70	Fabrication providing and fitting of impeller check nut (MS)
71	Fabrication providing and fitting of shaft sleeve finished out of SS
72	Fabrication and fiting of Coupling key/Cotter (finished) as per sample
73	Repairs to horizontal Pump with discharge (from and above 90000GPH but less than 100000 GPH) and head (from and above 30M but less than 80M) Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
74	Fabrication, providing and fitting of wear ring (finished) as per sample
75	Fabrication, providing and fitting of GM bush (finished) as per sample
76	Fabrication providing and fitting of Split type MS gand (finished)
77	Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring
78	Remetalling of bearing seats, and finishing to size for proper fitment of bearings
79	Remetalling of Pump shaft and finishing to size for proper fitment of bearings
80	Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample.
81	Providing and fitting of metallic palmative packing
82	Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample
83	Fabrication providing and fitting of impeller check nut (GM)
84	Fabrication providing and fitting of impeller check nut (MS)
85	Fabrication providing and fitting of shaft sleeve finished out of SS
86	Fabrication and fiting of Coupling key/Cotter (finished) as per sample
87	Providing and filling of M-oil for bearing housing
88	Repairs to submeribsle Pump with discharge (from and above 1000GPH but less than 3000 GPH) and head (from and above 30M but less than 100M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
89	Replacement of impeller
90	Bronze
91	Cast Steel / Stainless Steel.
92	Noryl
93	Replacement of Diffuser
94	Bronze
95	Cast Steel / Stainless Steel.
96	Noryl
97	Replacement of Pump Bowl
98	Fabrication, providing and fitting of Pump Shaft
99	Replacement of cast iron non return valve Shaft
100	Replacement of Stain less steel strainers
101	Replacement of cast iron threaded discharge outlet
102	Replacement of bowl stage bushes for fitment of impellers
103	Bronze
104	Cast Steel / Stainless Steel.
105	Noryl
106	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
107	50 mm Dia
108	65 mm Dia
109	80 mm Dia
110	100 mm Dia
111	Fabrication, providing and fitting of locking arrangment
112	Repairs to submeribsle Pump with discharge (from and above 1000GPH but less than 3000 GPH) and head (from and above 100M but less than 200M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
113	Replacement of impeller
114	Bronze
115	Cast Steel / Stainless Steel.
116	Noryl
117	Replacement of Diffuser
118	Bronze
119	Cast Steel / Stainless Steel.
120	Noryl
121	Replacement of Pump Bowl
122	Fabrication, providing and fitting of Pump Shaft
123	Replacement of cast iron non return valve Shaft
124	Replacement of Stain less steel strainers
125	Replacement of cast iron threaded discharge outlet
126	Replacement of bowl stage bushes for fitment of impellers
127	Bronze
128	Cast Steel / Stainless Steel.
129	Noryl
130	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
131	50 mm Dia
132	65 mm Dia
133	80 mm Dia
134	100 mm Dia
135	Fabrication, providing and fitting of locking arrangment
136	Repairs to submeribsle Pump with discharge (from and above 3000GPH but less than 7000 GPH) and head (from and above 30M but less than 100M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
137	Replacement of impeller
138	Bronze
139	Cast Steel / Stainless Steel.
140	Noryl
141	Replacement of Diffuser
142	Bronze
143	Cast Steel / Stainless Steel.
144	Noryl
145	Replacement of Pump Bowl
146	Fabrication, providing and fitting of Pump Shaft
147	Replacement of cast iron non return valve Shaft
148	Replacement of Stain less steel strainers
149	Replacement of cast iron threaded discharge outlet
150	Replacement of bowl stage bushes for fitment of impellers
151	Bronze
152	Cast Steel / Stainless Steel.
153	Noryl
154	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
155	50 mm Dia
156	65 mm Dia
157	80 mm Dia
158	100 mm Dia
159	Fabrication, providing and fitting of locking arrangment
160	Repairs to submeribsle Pump with discharge (from and above 3000GPH but less than 7000 GPH) and head (from and above 100M but less than 200M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
161	Replacement of impeller
162	Bronze
163	Cast Steel / Stainless Steel.
164	Noryl
165	Replacement of Diffuser
166	Bronze
167	Cast Steel / Stainless Steel.
168	Noryl
169	Replacement of Pump Bowl
170	Fabrication, providing and fitting of Pump Shaft
171	Replacement of cast iron non return valve Shaft
172	Replacement of Stain less steel strainers
173	Replacement of cast iron threaded discharge outlet
174	Replacement of bowl stage bushes for fitment of impellers
175	Bronze
176	Cast Steel / Stainless Steel.
177	Noryl
178	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
179	50 mm Dia
180	65 mm Dia
181	80 mm Dia
182	100 mm Dia
183	Fabrication, providing and fitting of locking arrangment
184	Repairs to submeribsle Pump with discharge (from and above 7000GPH but less than 12000 GPH) and head (from and above 30M but less than 100M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
185	Replacement of impeller
186	Bronze
187	Cast Steel / Stainless Steel.
188	Noryl
189	Replacement of Diffuser
190	Bronze
191	Cast Steel / Stainless Steel.
192	Noryl
193	Replacement of Pump Bowl
194	Fabrication, providing and fitting of Pump Shaft
195	Replacement of cast iron non return valve Shaft
196	Replacement of Stain less steel strainers
197	Replacement of cast iron threaded discharge outlet
198	Replacement of bowl stage bushes for fitment of impellers
199	Bronze
200	Cast Steel / Stainless Steel.
201	Noryl
202	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
203	50 mm Dia
204	65 mm Dia
205	80 mm Dia
206	100 mm Dia
207	Fabrication, providing and fitting of locking arrangment
208	Repairs to submeribsle Pump with discharge (from and above 7000GPH but less than 12000 GPH) and head (from and above 100M but less than 200M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
209	Replacement of impeller
210	Bronze
211	Cast Steel / Stainless Steel.
212	Noryl
213	Replacement of Diffuser
214	Bronze
215	Cast Steel / Stainless Steel.
216	Noryl
217	Replacement of Pump Bowl
218	Fabrication, providing and fitting of Pump Shaft
219	Replacement of cast iron non return valve Shaft
220	Replacement of Stain less steel strainers
221	Replacement of cast iron threaded discharge outlet
222	Replacement of bowl stage bushes for fitment of impellers
223	Bronze
224	Cast Steel / Stainless Steel.
225	Noryl
226	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
227	50 mm Dia
228	65 mm Dia
229	80 mm Dia
230	100 mm Dia
231	Fabrication, providing and fitting of locking arrangment
232	Repairs to the rising main for plugging the openings/cracks etc. by way of using DG set and welding set at site including following series of works.
233	Cost on account of making proper groove to the leak spot by using grinder at site.
234	Cost on account of providing of MS plate as required at site
235	Cost on account of welding the spot to make it leak proof. (Single beat)
236	Cost on account of welding the spot to make it leak proof. (Single beat)
237	Repairs to the non-rising spindle sluice Valve of size 80mm and 100 mm diameter including following series of works. Dismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
238	Dismantling the sluive valve for checking inner parts
239	Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample
240	Fabrication, providing and fitting of Check nut as per sample
241	Fabrication, providing and fitting of Flap
242	Cost on account of C.I. welding
243	Repairs to the non-rising splidle sluice Valve of size 125mm and 150 mm diameter including following series of works. Dismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
244	Dismantling the sluive valve for checking inner parts
245	Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample
246	Fabrication, providing and fitting of Check nut as per sample
247	Fabrication, providing and fitting of Flap
248	Cost on account of C.I. welding
249	Repairs to the non-rising spindle sluice Valve of size more than 150 mm diameter includingfollowing series of works Dismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
250	Dismantling the sluice valve for checking inner parts
251	Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample
252	Fabrication, providing and fitting of Check nut as per sample
253	Fabrication, providing and fitting of Flap
254	Cost on account of C.I. welding
255	Repairs to the Reflex Valve (NRV) of size 80mm and 100mmdiameter by way of using DG set and welding at site including following series of works. Dismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
256	Dismantling the Reflexvalve for checking inner parts
257	Fabrication providing and fitting of Flap of size and thickness asper sample
258	Making of flap seat to make it proper effective
259	Providing and fitting of jain as per sample
260	Providing and fitting of nuts and bolts as required
261	Making of hings for perfect movement of the flap
262	Making and fitting of hinge spindle as per sample
263	Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints
264	Cost on account of welding the spot to make it leak proof. (Single beat)
265	Cost on account of welding the spot to make it leak proof. (Double beat)
266	Repairs to the Reflex Valve (NRV) of size 125mm and 150mm diameter by way of using DG set and welding set at site including following series of works. Dismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
267	Dismantling the Reflex valve for checking inner parts
268	Fabrication providing and fitting of Flap of size and thickness asper sample
269	Making of flap seat to make it proper effective
270	Providing and fitting of jain as per sample
271	Providing and fitting of nuts and bolts as required
272	Making of hings for perfect movement of the flap
273	Making and fitting of hinge spindle as per sample
274	Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints
275	Cost on account of welding the spot to make it leak proof. (Single beat)
276	Cost on account of welding the spot to make it leak proof. (Double beat)
277	Repairs to the Reflex Valve (NRV) of size more than 150mmdiameter by way of using DG set and welding set at site including following series of works Dismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
278	Dismantling the Reflex valve for checking inner parts
279	Fabrication providing and fitting of Flap of size and thickness asper sample
280	Making of flap seat to make it proper effective
281	Providing and fitting of jain as per sample
282	Providing and fitting of nuts&&bolts as required
283	Making of hings for perfect movement of the flap
284	Making and fitting of hinge spindle as per sample
285	Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints
286	Cost on account of welding the spot to make it leak proof. (Single beat)
287	Cost on account of welding the spot to make it leak proof. (Double beat)
288	Repairs to the foot Valve of size 80mm to 150 mm diameter including following series of works Dismantling of the foot valve from the suction line and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
289	Dismantling the foot valve for checking inner parts
290	Making of hings for perfect movement of the flap
291	Making and fitting of hinge spindle as per sample
292	Cost on account of fabrication, providing and fitting of strainer of proper size
293	Cost on account of providing and fitting of Nuts and bolts
294	Providing and fitting of Rubber washers 5mm thick compatible for
295	65mm dia pipe flange
296	80mm dia pipe flange
297	100mm dia pipe flange
298	125mm dia pipe flange
299	150mm dia pipe flange
300	200mm dia pipe flange
301	250mm dia pipe flange
302	Providing and fitting of G. I. bends compatible for thickness between 3mm to 4.5mm
303	65mm
304	80mm
305	100mm
306	125mm
307	150mm
308	200mm
309	250mm
310	300mm
311	350mm
312	Providing and fitting of G. I. bends compatible for thickness 5mm onwards
313	65mm
314	80mm
315	100mm
316	125mm
317	150mm
318	200mm
319	250mm
320	300mm
321	350mm
322	Providing and fitting of thrust bearings for deep well submersible pumping units compatible for
323	Thrust base V4
324	Thrust base V6
325	Thrust base V8
326	Thrust pad V4
327	Thrust pad V6
328	Thrust pad V8
329	Providing and fitting of Side thrust bearing for different capacity open well submersible pumping units (horizontal type) compatible for
330	7.5HP
331	10HP
332	12.5HP
333	15HP and more
334	Providing and fitting of Bush bearing (DE & NDE) for different capacity open well submersible horizontal type pumping units compatible for
335	7.5HP
336	10HP
337	12.5HP
338	15HP and more
339	Providing and fitting of Bearing Housings with gaskets for different capacity motors and pumps compatible for
340	No. 6306
341	No. 6308
342	No. 6309
343	No. 6312
344	No. 3206 double groove
345	No. 5206 double groove
346	No. 6208
347	No. 7309
348	No. 6311
349	No. 6316
350	No. 6318
351	No. 2932 8E
352	No. 29324
353	No. 7210
354	No. 6319C3
355	No. N314
356	No. 7220BECB
357	No. 6310
358	No. 6212
359	No. 6305
360	No. 7312
361	No. 6307
362	Welding in single beat at various MS structural joints viz, gantry joint, column joint, gate joint, sheet joint, fencing joint etc.
363	Replacement of gravity to various batteries with charging
364	Mechanical seal for vertical type open well submersible pumping units
365	Oil seal for oil cooled submersible pumps
366	Water seal for oil cooled submersible pumps
367	Balancing ring for OWS pumping units
368	Providing and fitting of Ball valves of following capacities
369	12mm
370	15mm
371	25mm
372	40mm
373	Replacements of chain pulley block with 6m lift and successful testing of following capacities
374	01 Ton
375	02 Ton
376	03 Ton
377	05 Ton
378	Providing and fitting of Asbestos gland packing of superior quality
379	8.5 mm
380	10 mm
381	12 mm
382	16 mm
383	Providing and fitting of Tyre/rubber couplings of superior quality
384	TC-011
385	TC-012
386	TC-013
387	TC-014
388	TC-016
389	TC-019
390	Providing and fitting of Suction meshed strainer for bowl dia
391	100mm
392	125mm
393	150mm
394	200mm
395	250mm
396	300mm
397	Providing and fitting of Star couplings of superior quality
398	Assorted size
399	Repairs to MS/GI rising main at damaged joints by way of excavaton of trunches, cutting of both damaged flanges, providing and fitting of socket in two halves one from above and other on top by welding in two beats using welding, cutting, DG set along the contour of the rising main for making the leak proof solid joint
400	65mm
401	80mm
402	100mm
403	125mm
404	150mm
405	200mm
406	250mm
407	300mm
408	350mm
409	Repairs to open well submersible Pumping Unit with discharge from 3000GPH to 10000 GPH, head from and above 10M but less than 52M with motor rating as 1HP to 7.5HP
410	Dismantling of the open well submersible pumping unit at site, shifting to workshop, repairing, shifting back to site, re-fitting and successful testing on full load
411	Complete rewinding of the stator assembly by appropriate gauged copper wire
412	Cost on account of labour, insulted paper, sleeves etc., used during rewinding with testing
413	Cost on account of associated consumeable items like crimped paper, sleeves, PVC pipes, bamboo sticks, thread etc.
414	Replacement of Stain less steel shaft
415	Replacement of cast iron impeller
416	Replacement of cast iron volute casing
417	Providing and fitting of rubber oil seal
418	Providing and fitting of bronze bushes
419	Providing and fitting of stainless steel thrust pad
420	Providing and fitting of threaded plastic strainer
421	Repairs to open well submersible Pumping Unit with discharge from and above 10000GPH to 20000 GPH, head from and above 10M but less than 52M with motor rating from and above 7.5HP to 15HP
422	Dismantling of the open well submersible pumping unit at site, shifting to workshop, repairing, shifting back to site, re-fitting and successful testing on full load
423	Complete rewinding of the stator assembly by appropriate gauged copper wire
424	Cost on account of labour, insulted paper, sleeves etc., used during rewinding with testing
425	Cost on account of associated consumeable items like crimped paper, sleeves, PVC pipes, bamboo sticks, thread etc.
426	Replacement of Stain less steel shaft
427	Replacement of cast iron impeller
428	Replacement of cast iron volute casing
429	Providing and fitting of rubber oil seal
430	Providing and fitting of bronze bushes
431	Providing and fitting of stainless steel thrust pad
432	Providing and fitting of threaded plastic strainer
433	Providing and fitting of MS couplings for submersible pumping units
434	Providing and applying of grease
435	Providing and shrouding of Pea gravel 5mm
436	Providing and shrouding of Pea gravel 6mm
437	Providing and fitting of Ball/Thrust bearing (DE & NDE) for different capacity motors and pumps
438	No. 6308
439	No. 6309
440	No. 6312
441	No. 6306
442	No. 3206 double groove
443	No. 5206 double groove
444	No. 6208
445	No. 7309
446	No. 6311
447	No. 6316
448	No. 6318
449	No. 2932 8E
450	No. 29324
451	No. 7210
452	No. 6319C3
453	No. N314
454	No. 7220BECB
455	No. 6310
456	No. 6212
457	No. 6305
458	No. 7312
459	No. 6307
460	No 29330E thrust bearing
461	No. 29322 E thrust bearing
462	No 29416 E Thrust bearing
463	No 6313
464	No 6314
465	No 6315
466	No 6020
467	No. 8321
468	No. 8314
469	No. NU318c3
470	No. 6321
471	No, NU309
472	Providing and fitting of MS flanges 18 mm-30 mm thick by way of arc welding at site, including dismantling and testing of the joint, job includes providing of nuts and bolts and RI cloth
473	65 mm dia, 18 mm thick
474	80 mm dia , 20 mm thick
475	100 mm dia, 20 mm thick
476	125 mm dia, 22 mm thick
477	150 mm dia, 22 mm thick
478	200 mm dia, 22 mm thick
479	250 mm dia, 26 mm thick
480	300 mm dia, 28 mm thick
481	350 mm dia, 30 mm thick
482	Fabrication, providing and fitting of gland studs to horizontal pumps upto 12000 GPH
483	Fabrication, providing and fitting of gland studs to horizontal pumps upto 90000 GPH
484	Providing and fitting of CI foot valves at site including dismatling of suction site , fitting and testing of the same at site
485	65 mm dia
486	80 mm dia
487	100 mm dia
488	Fabrication, providing and fitting of MS foot valves at site including dismantling, fitting and testing of the same at site (including all accessories )
489	125 mm dia
490	150 mm dia
491	200 mm dia
492	250 mm dia
493	Providing and fitting of Flange rubber gasket at site including dismantling ,fitting and successfull testing
494	65 mm dia
495	80 mm dia
496	100 mm dia
497	125 mm dia
498	150 mm dia
499	200 mm dia
500	250 mm dia
501	300 mm dia
502	350 mm dia
503	Providing , fitting , machining ofC.I coupling complete to Horizontal pumping units with allied accessories
504	11 to 14 No.
505	15 to 18 No.
506	19 No.
507	Providing , fitting, machining of Hollow Shaft coupling for Hollow Shaft VT Motors including fabrication of key
508	15 HP to 25 HP
509	30 HP to 50 HP
510	60 HP to 150 HP
511	220 HP to 270 HP
512	Providing , fitting , machining of Solid shaft coupling to pumping uints 10"-12" size including all accessories
513	Providing and fitting of oil seal to Hollow Shaft VT Motors 220 HP to 270 HP Motor, Including dismantling of bearing and fitting of oil seal , fitting of thrusht bearing and testing at site on load.
514	Complete over hauling of the 7.5/5 HP commpressor of pressure vessel fitration plants
515	Providing and fitting of check nuts for horizontal pumping units as per sample