|
| 1 | Repairs to Multi stage bowl VT Pump of bowl having inside diameter 250mm and above.Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 2 | Line shaft (finished) out of SS-410 material as per sample |
| 3 | Head shaft (finished) out of SS-410 material as per sample |
| 4 | Bowl Shaft (finished) out of SS-410 material as per sample |
| 5 | Rubber liner cente kit bush |
| 6 | Muff coupling (finished) out of SS-400 material as per sample |
| 7 | Gun metal gland bush (finished) as per sample |
| 8 | MS gland (finished) as per sample |
| 9 | Facing /treatment of bowel stage and impeller for proper fitment of wearing ring |
| 10 | GM Wearing Ring (finished) as per sample |
| 11 | Cooling ring (finished) as per sample |
| 12 | Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample |
| 13 | Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape |
| 14 | Check nut (finished) as per sample |
| 15 | Ball bearing No: 6318 after removing old damaged bearing by skilled labours and tools/ tackles. |
| 16 | Repairs to Multi stage bowl VT Pump of bowl having inside diameter from 100mm upto less than 150mm diameterDismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 17 | Line shaft (finished) out of SS-410 material as per sample |
| 18 | Head shaft (finished) out of SS-410 material as per sample |
| 19 | Bowl Shaft (finished) out of SS-410 material as per sample |
| 20 | Rubber liner cente kit bush |
| 21 | Muff coupling (finished) out of SS-400 material as per sample |
| 22 | Gun metal gland bush (finished) as per sample |
| 23 | MS gland (finished) as per sample |
| 24 | Facing /treatment of bowel stage and impeller for proper fitment of wearing ring |
| 25 | GM Wearing Ring (finished) as per sample |
| 26 | Cooling ring (finished) as per sample |
| 27 | Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample |
| 28 | Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape |
| 29 | Check nut (finished) as per sample |
| 30 | Repairs to Multi stage bowl VT Pump of bowl having inside diameter from 150mm upto less than 250mm diameterDismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. |
| 31 | Line shaft (finished) out of SS-410 material as per sample |
| 32 | Head shaft (finished) out of SS-410 material as per sample |
| 33 | Bowl Shaft (finished) out of SS-410 material as per sample |
| 34 | Rubber liner cente kit bush |
| 35 | Muff coupling (finished) out of SS-400 material as per sample |
| 36 | Gun metal gland bush (finished) as per sample |
| 37 | MS gland (finished) as per sample |
| 38 | Facing /treatment of bowel stage and impeller for proper fitment of wearing ring |
| 39 | GM Wearing Ring (finished) as per sample |
| 40 | Cooling ring (finished) as per sample |
| 41 | Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample |
| 42 | Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape |
| 43 | Check nut (finished) as per sample |
| 44 | Ball bearing No: 6318 after removing old damaged bearing by skilled labours and tools/ tackles. |
| 45 | Repairs to horizontal Pump with discharge (from and above 5000GPH but less than 8000 GPH) and head (from and above 30M but less than 50M)Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items |
| 46 | Fabrication, providing and fitting of wear ring (finished) as per sample |
| 47 | Fabrication, providing and fitting of GM bush (finished) as per sample |
| 48 | Fabrication providing and fitting of Split type MS gand (finished) |
| 49 | Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring |
| 50 | Remetalling of bearing seats, and finishing to size for proper fitment of bearings |
| 51 | Remetalling of Pump shaft and finishing to size for proper fitment of bearings |
| 52 | Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample. |
| 53 | Providing and fitting of metallic palmative packing |
| 54 | Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample |
| 55 | Fabrication providing and fitting of impeller check nut (GM) |
| 56 | Fabrication providing and fitting of impeller check nut (MS) |
| 57 | Fabrication providing and fitting of shaft sleeve finished out of SS |
| 58 | Fabrication and fiting of Coupling key/Cotter (finished) as per sample |
| 59 | Repairs to horizontal Pump with discharge (from and above 8000GPH but less than 15000 GPH) and head (from and above 30M but less than 50M)Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items |
| 60 | Fabrication, providing and fitting of wear ring (finished) as per sample |
| 61 | Fabrication, providing and fitting of GM bush (finished) as per sample |
| 62 | Fabrication providing and fitting of Split type MS gand (finished) |
| 63 | Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring |
| 64 | Remetalling of bearing seats, and finishing to size for proper fitment of bearings |
| 65 | Remetalling of Pump shaft and finishing to size for proper fitment of bearings |
| 66 | Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample. |
| 67 | Providing and fitting of metallic palmative packing |
| 68 | Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample |
| 69 | Fabrication providing and fitting of impeller check nut (GM) |
| 70 | Fabrication providing and fitting of impeller check nut (MS) |
| 71 | Fabrication providing and fitting of shaft sleeve finished out of SS |
| 72 | Fabrication and fiting of Coupling key/Cotter (finished) as per sample |
| 73 | Repairs to horizontal Pump with discharge (from and above 90000GPH but less than 100000 GPH) and head (from and above 30M but less than 80M)Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items |
| 74 | Fabrication, providing and fitting of wear ring (finished) as per sample |
| 75 | Fabrication, providing and fitting of GM bush (finished) as per sample |
| 76 | Fabrication providing and fitting of Split type MS gand (finished) |
| 77 | Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring |
| 78 | Remetalling of bearing seats, and finishing to size for proper fitment of bearings |
| 79 | Remetalling of Pump shaft and finishing to size for proper fitment of bearings |
| 80 | Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample. |
| 81 | Providing and fitting of metallic palmative packing |
| 82 | Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample |
| 83 | Fabrication providing and fitting of impeller check nut (GM) |
| 84 | Fabrication providing and fitting of impeller check nut (MS) |
| 85 | Fabrication providing and fitting of shaft sleeve finished out of SS |
| 86 | Fabrication and fiting of Coupling key/Cotter (finished) as per sample |
| 87 | Providing and filling of M-oil for bearing housing |
| 88 | Repairs to submeribsle Pump with discharge (from and above 1000GPH but less than 3000 GPH) and head (from and above 30M but less than 100M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items |
| 89 | Replacement of impeller |
| 90 | Bronze |
| 91 | Cast Steel / Stainless Steel. |
| 92 | Noryl |
| 93 | Replacement of Diffuser |
| 94 | Bronze |
| 95 | Cast Steel / Stainless Steel. |
| 96 | Noryl |
| 97 | Replacement of Pump Bowl |
| 98 | Fabrication, providing and fitting of Pump Shaft |
| 99 | Replacement of cast iron non return valve Shaft |
| 100 | Replacement of Stain less steel strainers |
| 101 | Replacement of cast iron threaded discharge outlet |
| 102 | Replacement of bowl stage bushes for fitment of impellers |
| 103 | Bronze |
| 104 | Cast Steel / Stainless Steel. |
| 105 | Noryl |
| 106 | Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) |
| 107 | 50 mm Dia |
| 108 | 65 mm Dia |
| 109 | 80 mm Dia |
| 110 | 100 mm Dia |
| 111 | Fabrication, providing and fitting of locking arrangment |
| 112 | Repairs to submeribsle Pump with discharge (from and above 1000GPH but less than 3000 GPH) and head (from and above 100M but less than 200M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items |
| 113 | Replacement of impeller |
| 114 | Bronze |
| 115 | Cast Steel / Stainless Steel. |
| 116 | Noryl |
| 117 | Replacement of Diffuser |
| 118 | Bronze |
| 119 | Cast Steel / Stainless Steel. |
| 120 | Noryl |
| 121 | Replacement of Pump Bowl |
| 122 | Fabrication, providing and fitting of Pump Shaft |
| 123 | Replacement of cast iron non return valve Shaft |
| 124 | Replacement of Stain less steel strainers |
| 125 | Replacement of cast iron threaded discharge outlet |
| 126 | Replacement of bowl stage bushes for fitment of impellers |
| 127 | Bronze |
| 128 | Cast Steel / Stainless Steel. |
| 129 | Noryl |
| 130 | Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) |
| 131 | 50 mm Dia |
| 132 | 65 mm Dia |
| 133 | 80 mm Dia |
| 134 | 100 mm Dia |
| 135 | Fabrication, providing and fitting of locking arrangment |
| 136 | Repairs to submeribsle Pump with discharge (from and above 3000GPH but less than 7000 GPH) and head (from and above 30M but less than 100M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items |
| 137 | Replacement of impeller |
| 138 | Bronze |
| 139 | Cast Steel / Stainless Steel. |
| 140 | Noryl |
| 141 | Replacement of Diffuser |
| 142 | Bronze |
| 143 | Cast Steel / Stainless Steel. |
| 144 | Noryl |
| 145 | Replacement of Pump Bowl |
| 146 | Fabrication, providing and fitting of Pump Shaft |
| 147 | Replacement of cast iron non return valve Shaft |
| 148 | Replacement of Stain less steel strainers |
| 149 | Replacement of cast iron threaded discharge outlet |
| 150 | Replacement of bowl stage bushes for fitment of impellers |
| 151 | Bronze |
| 152 | Cast Steel / Stainless Steel. |
| 153 | Noryl |
| 154 | Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) |
| 155 | 50 mm Dia |
| 156 | 65 mm Dia |
| 157 | 80 mm Dia |
| 158 | 100 mm Dia |
| 159 | Fabrication, providing and fitting of locking arrangment |
| 160 | Repairs to submeribsle Pump with discharge (from and above 3000GPH but less than 7000 GPH) and head (from and above 100M but less than 200M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items |
| 161 | Replacement of impeller |
| 162 | Bronze |
| 163 | Cast Steel / Stainless Steel. |
| 164 | Noryl |
| 165 | Replacement of Diffuser |
| 166 | Bronze |
| 167 | Cast Steel / Stainless Steel. |
| 168 | Noryl |
| 169 | Replacement of Pump Bowl |
| 170 | Fabrication, providing and fitting of Pump Shaft |
| 171 | Replacement of cast iron non return valve Shaft |
| 172 | Replacement of Stain less steel strainers |
| 173 | Replacement of cast iron threaded discharge outlet |
| 174 | Replacement of bowl stage bushes for fitment of impellers |
| 175 | Bronze |
| 176 | Cast Steel / Stainless Steel. |
| 177 | Noryl |
| 178 | Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) |
| 179 | 50 mm Dia |
| 180 | 65 mm Dia |
| 181 | 80 mm Dia |
| 182 | 100 mm Dia |
| 183 | Fabrication, providing and fitting of locking arrangment |
| 184 | Repairs to submeribsle Pump with discharge (from and above 7000GPH but less than 12000 GPH) and head (from and above 30M but less than 100M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items |
| 185 | Replacement of impeller |
| 186 | Bronze |
| 187 | Cast Steel / Stainless Steel. |
| 188 | Noryl |
| 189 | Replacement of Diffuser |
| 190 | Bronze |
| 191 | Cast Steel / Stainless Steel. |
| 192 | Noryl |
| 193 | Replacement of Pump Bowl |
| 194 | Fabrication, providing and fitting of Pump Shaft |
| 195 | Replacement of cast iron non return valve Shaft |
| 196 | Replacement of Stain less steel strainers |
| 197 | Replacement of cast iron threaded discharge outlet |
| 198 | Replacement of bowl stage bushes for fitment of impellers |
| 199 | Bronze |
| 200 | Cast Steel / Stainless Steel. |
| 201 | Noryl |
| 202 | Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) |
| 203 | 50 mm Dia |
| 204 | 65 mm Dia |
| 205 | 80 mm Dia |
| 206 | 100 mm Dia |
| 207 | Fabrication, providing and fitting of locking arrangment |
| 208 | Repairs to submeribsle Pump with discharge (from and above 7000GPH but less than 12000 GPH) and head (from and above 100M but less than 200M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items |
| 209 | Replacement of impeller |
| 210 | Bronze |
| 211 | Cast Steel / Stainless Steel. |
| 212 | Noryl |
| 213 | Replacement of Diffuser |
| 214 | Bronze |
| 215 | Cast Steel / Stainless Steel. |
| 216 | Noryl |
| 217 | Replacement of Pump Bowl |
| 218 | Fabrication, providing and fitting of Pump Shaft |
| 219 | Replacement of cast iron non return valve Shaft |
| 220 | Replacement of Stain less steel strainers |
| 221 | Replacement of cast iron threaded discharge outlet |
| 222 | Replacement of bowl stage bushes for fitment of impellers |
| 223 | Bronze |
| 224 | Cast Steel / Stainless Steel. |
| 225 | Noryl |
| 226 | Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) |
| 227 | 50 mm Dia |
| 228 | 65 mm Dia |
| 229 | 80 mm Dia |
| 230 | 100 mm Dia |
| 231 | Fabrication, providing and fitting of locking arrangment |
| 232 | Repairs to the rising main for plugging the openings/cracks etc. by way of using DG set and welding set at site including following series of works. |
| 233 | Cost on account of making proper groove to the leak spot by using grinder at site. |
| 234 | Cost on account of providing of MS plate as required at site |
| 235 | Cost on account of welding the spot to make it leak proof. (Single beat) |
| 236 | Cost on account of welding the spot to make it leak proof. (Single beat) |
| 237 | Repairs to the non-rising spindle sluice Valve of size 80mm and 100 mm diameter including following series of works.Dismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works |
| 238 | Dismantling the sluive valve for checking inner parts |
| 239 | Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample |
| 240 | Fabrication, providing and fitting of Check nut as per sample |
| 241 | Fabrication, providing and fitting of Flap |
| 242 | Cost on account of C.I. welding |
| 243 | Repairs to the non-rising splidle sluice Valve of size 125mm and 150 mm diameter including following series of works.Dismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works |
| 244 | Dismantling the sluive valve for checking inner parts |
| 245 | Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample |
| 246 | Fabrication, providing and fitting of Check nut as per sample |
| 247 | Fabrication, providing and fitting of Flap |
| 248 | Cost on account of C.I. welding |
| 249 | Repairs to the non-rising spindle sluice Valve of size more than 150 mm diameter includingfollowing series of worksDismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works |
| 250 | Dismantling the sluice valve for checking inner parts |
| 251 | Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample |
| 252 | Fabrication, providing and fitting of Check nut as per sample |
| 253 | Fabrication, providing and fitting of Flap |
| 254 | Cost on account of C.I. welding |
| 255 | Repairs to the Reflex Valve (NRV) of size 80mm and 100mmdiameter by way of using DG set and welding at site including following series of works.Dismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works |
| 256 | Dismantling the Reflexvalve for checking inner parts |
| 257 | Fabrication providing and fitting of Flap of size and thickness asper sample |
| 258 | Making of flap seat to make it proper effective |
| 259 | Providing and fitting of jain as per sample |
| 260 | Providing and fitting of nuts and bolts as required |
| 261 | Making of hings for perfect movement of the flap |
| 262 | Making and fitting of hinge spindle as per sample |
| 263 | Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints |
| 264 | Cost on account of welding the spot to make it leak proof. (Single beat) |
| 265 | Cost on account of welding the spot to make it leak proof. (Double beat) |
| 266 | Repairs to the Reflex Valve (NRV) of size 125mm and 150mm diameter by way of using DG set and welding set at site including following series of works.Dismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works |
| 267 | Dismantling the Reflex valve for checking inner parts |
| 268 | Fabrication providing and fitting of Flap of size and thickness asper sample |
| 269 | Making of flap seat to make it proper effective |
| 270 | Providing and fitting of jain as per sample |
| 271 | Providing and fitting of nuts and bolts as required |
| 272 | Making of hings for perfect movement of the flap |
| 273 | Making and fitting of hinge spindle as per sample |
| 274 | Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints |
| 275 | Cost on account of welding the spot to make it leak proof. (Single beat) |
| 276 | Cost on account of welding the spot to make it leak proof. (Double beat) |
| 277 | Repairs to the Reflex Valve (NRV) of size more than 150mmdiameter by way of using DG set and welding set at site including following series of worksDismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works |
| 278 | Dismantling the Reflex valve for checking inner parts |
| 279 | Fabrication providing and fitting of Flap of size and thickness asper sample |
| 280 | Making of flap seat to make it proper effective |
| 281 | Providing and fitting of jain as per sample |
| 282 | Providing and fitting of nuts&&bolts as required |
| 283 | Making of hings for perfect movement of the flap |
| 284 | Making and fitting of hinge spindle as per sample |
| 285 | Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints |
| 286 | Cost on account of welding the spot to make it leak proof. (Single beat) |
| 287 | Cost on account of welding the spot to make it leak proof. (Double beat) |
| 288 | Repairs to the foot Valve of size 80mm to 150 mm diameter including following series of worksDismantling of the foot valve from the suction line and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works |
| 289 | Dismantling the foot valve for checking inner parts |
| 290 | Making of hings for perfect movement of the flap |
| 291 | Making and fitting of hinge spindle as per sample |
| 292 | Cost on account of fabrication, providing and fitting of strainer of proper size |
| 293 | Cost on account of providing and fitting of Nuts and bolts |
| 294 | Providing and fitting of Rubber washers 5mm thick compatible for |
| 295 | 65mm dia pipe flange |
| 296 | 80mm dia pipe flange |
| 297 | 100mm dia pipe flange |
| 298 | 125mm dia pipe flange |
| 299 | 150mm dia pipe flange |
| 300 | 200mm dia pipe flange |
| 301 | 250mm dia pipe flange |
| 302 | Providing and fitting of G. I. bends compatible for thickness between 3mm to 4.5mm |
| 303 | 65mm |
| 304 | 80mm |
| 305 | 100mm |
| 306 | 125mm |
| 307 | 150mm |
| 308 | 200mm |
| 309 | 250mm |
| 310 | 300mm |
| 311 | 350mm |
| 312 | Providing and fitting of G. I. bends compatible for thickness 5mm onwards |
| 313 | 65mm |
| 314 | 80mm |
| 315 | 100mm |
| 316 | 125mm |
| 317 | 150mm |
| 318 | 200mm |
| 319 | 250mm |
| 320 | 300mm |
| 321 | 350mm |
| 322 | Providing and fitting of thrust bearings for deep well submersible pumping units compatible for |
| 323 | Thrust base V4 |
| 324 | Thrust base V6 |
| 325 | Thrust base V8 |
| 326 | Thrust pad V4 |
| 327 | Thrust pad V6 |
| 328 | Thrust pad V8 |
| 329 | Providing and fitting of Side thrust bearing for different capacity open well submersible pumping units (horizontal type) compatible for |
| 330 | 7.5HP |
| 331 | 10HP |
| 332 | 12.5HP |
| 333 | 15HP and more |
| 334 | Providing and fitting of Bush bearing (DE & NDE) for different capacity open well submersible horizontal type pumping units compatible for |
| 335 | 7.5HP |
| 336 | 10HP |
| 337 | 12.5HP |
| 338 | 15HP and more |
| 339 | Providing and fitting of Bearing Housings with gaskets for different capacity motors and pumps compatible for |
| 340 | No. 6306 |
| 341 | No. 6308 |
| 342 | No. 6309 |
| 343 | No. 6312 |
| 344 | No. 3206 double groove |
| 345 | No. 5206 double groove |
| 346 | No. 6208 |
| 347 | No. 7309 |
| 348 | No. 6311 |
| 349 | No. 6316 |
| 350 | No. 6318 |
| 351 | No. 2932 8E |
| 352 | No. 29324 |
| 353 | No. 7210 |
| 354 | No. 6319C3 |
| 355 | No. N314 |
| 356 | No. 7220BECB |
| 357 | No. 6310 |
| 358 | No. 6212 |
| 359 | No. 6305 |
| 360 | No. 7312 |
| 361 | No. 6307 |
| 362 | Welding in single beat at various MS structural joints viz, gantry joint, column joint, gate joint, sheet joint, fencing joint etc. |
| 363 | Replacement of gravity to various batteries with charging |
| 364 | Mechanical seal for vertical type open well submersible pumping units |
| 365 | Oil seal for oil cooled submersible pumps |
| 366 | Water seal for oil cooled submersible pumps |
| 367 | Balancing ring for OWS pumping units |
| 368 | Providing and fitting of Ball valves of following capacities |
| 369 | 12mm |
| 370 | 15mm |
| 371 | 25mm |
| 372 | 40mm |
| 373 | Replacements of chain pulley block with 6m lift and successful testing of following capacities |
| 374 | 01 Ton |
| 375 | 02 Ton |
| 376 | 03 Ton |
| 377 | 05 Ton |
| 378 | Providing and fitting of Asbestos gland packing of superior quality |
| 379 | 8.5 mm |
| 380 | 10 mm |
| 381 | 12 mm |
| 382 | 16 mm |
| 383 | Providing and fitting of Tyre/rubber couplings of superior quality |
| 384 | TC-011 |
| 385 | TC-012 |
| 386 | TC-013 |
| 387 | TC-014 |
| 388 | TC-016 |
| 389 | TC-019 |
| 390 | Providing and fitting of Suction meshed strainer for bowl dia |
| 391 | 100mm |
| 392 | 125mm |
| 393 | 150mm |
| 394 | 200mm |
| 395 | 250mm |
| 396 | 300mm |
| 397 | Providing and fitting of Star couplings of superior quality |
| 398 | Assorted size |
| 399 | Repairs to MS/GI rising main at damaged joints by way of excavaton of trunches, cutting of both damaged flanges, providing and fitting of socket in two halves one from above and other on top by welding in two beats using welding, cutting, DG set along the contour of the rising main for making the leak proof solid joint |
| 400 | 65mm |
| 401 | 80mm |
| 402 | 100mm |
| 403 | 125mm |
| 404 | 150mm |
| 405 | 200mm |
| 406 | 250mm |
| 407 | 300mm |
| 408 | 350mm |
| 409 | Repairs to open well submersible Pumping Unit with discharge from 3000GPH to 10000 GPH, head from and above 10M but less than 52M with motor rating as 1HP to 7.5HP |
| 410 | Dismantling of the open well submersible pumping unit at site, shifting to workshop, repairing, shifting back to site, re-fitting and successful testing on full load |
| 411 | Complete rewinding of the stator assembly by appropriate gauged copper wire |
| 412 | Cost on account of labour, insulted paper, sleeves etc., used during rewinding with testing |
| 413 | Cost on account of associated consumeable items like crimped paper, sleeves, PVC pipes, bamboo sticks, thread etc. |
| 414 | Replacement of Stain less steel shaft |
| 415 | Replacement of cast iron impeller |
| 416 | Replacement of cast iron volute casing |
| 417 | Providing and fitting of rubber oil seal |
| 418 | Providing and fitting of bronze bushes |
| 419 | Providing and fitting of stainless steel thrust pad |
| 420 | Providing and fitting of threaded plastic strainer |
| 421 | Repairs to open well submersible Pumping Unit with discharge from and above 10000GPH to 20000 GPH, head from and above 10M but less than 52M with motor rating from and above 7.5HP to 15HP |
| 422 | Dismantling of the open well submersible pumping unit at site, shifting to workshop, repairing, shifting back to site, re-fitting and successful testing on full load |
| 423 | Complete rewinding of the stator assembly by appropriate gauged copper wire |
| 424 | Cost on account of labour, insulted paper, sleeves etc., used during rewinding with testing |
| 425 | Cost on account of associated consumeable items like crimped paper, sleeves, PVC pipes, bamboo sticks, thread etc. |
| 426 | Replacement of Stain less steel shaft |
| 427 | Replacement of cast iron impeller |
| 428 | Replacement of cast iron volute casing |
| 429 | Providing and fitting of rubber oil seal |
| 430 | Providing and fitting of bronze bushes |
| 431 | Providing and fitting of stainless steel thrust pad |
| 432 | Providing and fitting of threaded plastic strainer |
| 433 | Providing and fitting of MS couplings for submersible pumping units |
| 434 | Providing and applying of grease |
| 435 | Providing and shrouding of Pea gravel 5mm |
| 436 | Providing and shrouding of Pea gravel 6mm |
| 437 | Providing and fitting of Ball/Thrust bearing (DE & NDE) for different capacity motors and pumps |
| 438 | No. 6308 |
| 439 | No. 6309 |
| 440 | No. 6312 |
| 441 | No. 6306 |
| 442 | No. 3206 double groove |
| 443 | No. 5206 double groove |
| 444 | No. 6208 |
| 445 | No. 7309 |
| 446 | No. 6311 |
| 447 | No. 6316 |
| 448 | No. 6318 |
| 449 | No. 2932 8E |
| 450 | No. 29324 |
| 451 | No. 7210 |
| 452 | No. 6319C3 |
| 453 | No. N314 |
| 454 | No. 7220BECB |
| 455 | No. 6310 |
| 456 | No. 6212 |
| 457 | No. 6305 |
| 458 | No. 7312 |
| 459 | No. 6307 |
| 460 | No 29330E thrust bearing |
| 461 | No. 29322 E thrust bearing |
| 462 | No 29416 E Thrust bearing |
| 463 | No 6313 |
| 464 | No 6314 |
| 465 | No 6315 |
| 466 | No 6020 |
| 467 | No. 8321 |
| 468 | No. 8314 |
| 469 | No. NU318c3 |
| 470 | No. 6321 |
| 471 | No, NU309 |
| 472 | Providing and fitting of MS flanges 18 mm-30 mm thick by way of arc welding at site, including dismantling and testing of the joint, job includes providing of nuts and bolts and RI cloth |
| 473 | 65 mm dia, 18 mm thick |
| 474 | 80 mm dia , 20 mm thick |
| 475 | 100 mm dia, 20 mm thick |
| 476 | 125 mm dia, 22 mm thick |
| 477 | 150 mm dia, 22 mm thick |
| 478 | 200 mm dia, 22 mm thick |
| 479 | 250 mm dia, 26 mm thick |
| 480 | 300 mm dia, 28 mm thick |
| 481 | 350 mm dia, 30 mm thick |
| 482 | Fabrication, providing and fitting of gland studs to horizontal pumps upto 12000 GPH |
| 483 | Fabrication, providing and fitting of gland studs to horizontal pumps upto 90000 GPH |
| 484 | Providing and fitting of CI foot valves at site including dismatling of suction site , fitting and testing of the same at site |
| 485 | 65 mm dia |
| 486 | 80 mm dia |
| 487 | 100 mm dia |
| 488 | Fabrication, providing and fitting of MS foot valves at site including dismantling, fitting and testing of the same at site (including all accessories ) |
| 489 | 125 mm dia |
| 490 | 150 mm dia |
| 491 | 200 mm dia |
| 492 | 250 mm dia |
| 493 | Providing and fitting of Flange rubber gasket at site including dismantling ,fitting and successfull testing |
| 494 | 65 mm dia |
| 495 | 80 mm dia |
| 496 | 100 mm dia |
| 497 | 125 mm dia |
| 498 | 150 mm dia |
| 499 | 200 mm dia |
| 500 | 250 mm dia |
| 501 | 300 mm dia |
| 502 | 350 mm dia |
| 503 | Providing , fitting , machining ofC.I coupling complete to Horizontal pumping units with allied accessories |
| 504 | 11 to 14 No. |
| 505 | 15 to 18 No. |
| 506 | 19 No. |
| 507 | Providing , fitting, machining of Hollow Shaft coupling for Hollow Shaft VT Motors including fabrication of key |
| 508 | 15 HP to 25 HP |
| 509 | 30 HP to 50 HP |
| 510 | 60 HP to 150 HP |
| 511 | 220 HP to 270 HP |
| 512 | Providing , fitting , machining of Solid shaft coupling to pumping uints 10\"-12\" size including all accessories |
| 513 | Providing and fitting of oil seal to Hollow Shaft VT Motors 220 HP to 270 HP Motor, Including dismantling of bearing and fitting of oil seal , fitting of thrusht bearing and testing at site on load. |
| 514 | Complete over hauling of the 7.5/5 HP commpressor of pressure vessel fitration plants |
| 515 | Providing and fitting of check nuts for horizontal pumping units as per sample |
