Mechanical Workshops Machine Shop And Cnc Lab Equipments Universal dividing (indexing) head- (Outer dimensions are 220 mm height, 250 mm length, 156 mm width and respective inner dimensions are 128 mm x 207mm x 114 mm, spindle hole sise - 25 mm) 1 2 Universal surface gauge of hardened steel base having knurlled thumb screw located at the end of rocker for fine adjustment, height300 mm, width- 65 mm, length-80 mm. 2 3 Fitting bench vice - size 6 made of C.I., having tensile strength of 30 PSI, capable of rotating , soft jaw cover made of Aluminium, Jaw size-150mm, opening width -80 mm 10 4 Carpenter vice - 10, opening width - 80 mm, jaw size, 250 mm made of C.I. 10 5 Pipe vice (open type) - self locking type, made of C.I., V - shaped jaw to clamp pipe, Jaw opening - 75mm, jaw width- 40 mm app. 2 6 Dial indicator with magnetic base stand - measuring range (0-12.7 mm), conversion0.01 mm /0.0005 2 7 CNC Lathe Trainer Specifications: - Main machine a. Height of centers 100 mm, b. Distance between centers 310 mm, c. Swing over bed 150 mm, d. Swing over cross slide 75 mm, e. Travel of cross slide 75 mm, f. Max. Turning dia. 45 mm, g. Max. Turning length 150 mm, h. Longitudinal traverse 180 mm - Head stock a. Hole through main spindle 16 mm, b. Spindle taper 2 MT, c. Type of drive AC servo motor, d. Speed range 50-3000 rpm, e. Motor power 0.75 kw - Tail stock : - a. Sleeve diameter 22 mm, b. Stroke 35 mm, c. Taper 1 MT - Feed:- a. Type of drive for both axis AC servo motors, b. Resolution 0.001 mm, c. Rapid traverse rate 700 mm/min, d. Programmable feed rate 1-700 mm/min - CNC system a. No. of axis 2 - Operation and training manual 1 Standard accessories: - One set of hand tools for normal operation, - One instruction cum programming manual, - Standard colour : double colour (white and blue), - Electrical : 3 phase, 415 V+/- 10%, 50Hz,+/-3%,, AC supply - MPG, - Panel AC for CNC system and drive, - Test pieces Special accessories - - Clamping plate dia 90 mm with four chucking grooves and 2 clamps - Live centre MT1 - 3 jaws self centering chucks, dia 80 mm with scroll 2x3 jaws and Operating key - Machine light, - External Turning tool neutral with one insert, - Boring tool with one insert, - External thread cutting tool with one insert for 1.5 mm pitch Pc based two axis CNC system, command type absolute. Interpolation linear And circular programming G code, M code, F code, T code.
