}

Repair Maintenance Of Summer Appliance I E Water Cooler Desert Cooler Ac Refrigerator And Deep Freezers And Repair Overhauling Of Ceiling Fans Exhaust Fans Geysers Air Circulator Fresh Air Fan Etc At Military Station Kanasar Repair Maintenance Of Summer A, kanasar-Rajasthan

Military Engineer Services-MES has published Repair Maintenance Of Summer Appliance I E Water Cooler Desert Cooler Ac Refrigerator And Deep Freezers And Repair Overhauling Of Ceiling Fans Exhaust Fans Geysers Air Circulator Fresh Air Fan Etc At Military Station Kanasar Repair Maintenance Of Summer A. Submission Date for this Tender is 30-05-2022. Air Conditioner Tenders in kanasar Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

32095867
Corrigendum : Repair Maintenance Of Summer Appliance I E Water Cooler Desert Cooler Ac Refrigerator And Deep Freezers And Repair Overhauling Of Ceiling Fans Exhaust Fans Geysers Air Circulator Fresh Air Fan Etc At Military Station Kanasar Repair Maintenance Of Summer A
Open Tender
Indian
Rajasthan
kanasar
30-05-2022

Tender Details

Repair Maintenance Of Summer Appliance I E Water Cooler Desert Cooler Ac Refrigerator And Deep Freezers And Repair Overhauling Of Ceiling Fans Exhaust Fans Geysers Air Circulator Fresh Air Fan Etc At Military Station Kanasar Repair Maintenance Of Summer Appliance I E Water Cooler Desert Cooler Ac Refrigerator And Deep Freezers And Repair Overhauling Of Ceiling Fans Exhaust Fans Geysers Air Circulator Fresh Air Fan Etc At Military Station Kanasar

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 23-May-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 30-05-2022

Key Value

Document Fees
INR 500 /-
EMD
INR 14000.0 /-
Tender Value
INR 7 Lakhs /-

BOQ Items

Name of Work : Repair/Maintenance of summer appliance i.e. water cooler, desert cooler, AC, refrigerator & deep freezers and repair/overhauling of ceiling fans, exhaust fans, geysers, aircirculator, fresh air fan etc at Military Station Kanasar.
Sl. No. Item Description
1Taking down and dismantling of ceiling fan 1200mm/1400mm sweep of any make new/old model by opening the cover, separating down rod, rotor and stator assembly, locating the fault and making the fan fully in serviceable condition including replacing the defective worn out screw of the cover, split pin, oiling and grassing etc, including repainting with synthetic enamel paint by spraying including filling cavities with filler, re-writing the MES No. as of original size with stencil, including cleaning of the rating plate with the thinner etc complete all as specified & as directed. Note : Rewinding and parts such as bushing, bearings, condensers, ‘D’ clamps with nuts, quarter pin & rubber seal, down rod, PVC Canopies, flexible wire & shaft etc shall be measured and paid separately under the respective items here-in-after.
2M&L for re-winding mortar of ceiling fan any make/model size 1400MM sweep with super enameled copper winding wire of existing specification, gauge & weight conforming to IS including insulating material & varnishing the mortar windings with good quality varnish complete all as specified & as directed. Make of winding wire : MILAN/ATLAS/CHETAK/DEVIDAYAL
3M&L for re-winding mortar of ceiling fan any make/model size 1200MM sweep with super enameled copper winding wire of existing specification, gauge & weight conforming to IS including insulating material & varnishing the mortar windings with good quality varnish complete all as specified & as directed. Make of winding wire : MILAN/ATLAS/CHETAK/DEVIDAYAL
4S&F in replacement of ball bearing of suitable size for ceiling fan 1200mm/1400mm sweep complete all as specified & as directed. Make : NBC/SKF confirming to IS
5S&F in replacement of brass bush suitable for ceiling fan any make/model all as per original size/shape/type conforming to IS complete all as specified & as directed.
6S&F in replacement of canopy suitable for ceiling fans of any make, type and size complete all as specified & as directed. Make : Usha/Bajaj/Khaitan/Orient/CG/Polar/Havells.
7S&F in replacement of shaft of ceiling fan as per existing size and shape complete all as specified & as directed.
8S&F in replacement of fan blades for 1200mm sweep fan as per sample kept in AGE’s Office complete all as specified & as directed.
9S&F in replacement of capacitor 230V, 50 Hz, 2.5 MFD for ceiling fan complete all as specified & as directed. Make : Asain/Usha/Universal/Tibcon
10S&F in replacement down rod one foot long suitable for 1200/1400mm sweep of ceiling fan as required at site complete all as specified & as directed.
11S&F in replacement ‘D’ clamp with nuts, check nuts, quarter pin and rubber reel suitable for 1200/1400mm sweep of ceiling fan as required at site complete all as specified & as directed.
12S&F in replacement for PVC insulated and over all PVC sheathed copper conductor wire of size 1.5Sqmm x 3 core, flexible wire ISI marked, for connection of fan from ceiling rose to fans complete all as specified & as directed. Make : Finolex/Polycab/Havells
13S&F in replacement Ceiling cover plate circular type for ceiling fans of any make, type and size complete all as specified & as directed. Make : Acchor/Havells/Usha/Khaitan/Orient
14S&F in replacement fan regulator Paino type for ceiling fans of any make, type and size complete all as specified & as directed. Make : Anchor/Havells/Kingal/Khaitan/Orient
15EXHAUST FAN / AIR CIRCULATOR FRESH AIR FAN
16Taking down & dismantling of PVC Air Freshener Fans/Exhaust fan 200mm/250mm/300mm/450mm sweep of any make new/old model by opening the cover , separating the down rod, rotor and stator assembly, locating the faultand making the exhaust fan fully in serviceable condition including replacing the defective worn out screw of cover, split pin, oiling and greasing etc, including repainting with synthetic enamel paints by spraying including filing cavities with filler, rewriting of MES No. as original, reassembling the fan and testing complete to the satisfaction of the Engineer-in-Charge. Note : Rewinding and parts such as bushing, bearing, condensers & flexible wireshall be measured and paid for separately under the respective items here-in-after.
17M&L for re-winding of PVC Air Freshener fans 200mm sweep any make/model size with supper enameled copper winding wire of size 35/36 SWG or as per existing size of wire confirming to IS including varnishing the motor windings with good quality varnish complete all as specified & as directed. Make of winding wire : MILAN/ATLAS/CHETAK/DEVIDAYAL
18Ditto all as per serial Item No. 17.00 here-in-before but size 250 mm sweep.
19M&L for re-winding of exhaust fan 300 mm sweep any make/model size with super enameled copper winding wires of size 35/36 SWG or as per existing size of wire confirming to IS including varnishing the motor windings with good quality varnish complete all as specified & as directed. Make of winding wire : MILAN/ATLAS/CHETAK/DEVIDAYAL
20Ditto all as per serial Item No. 19.00 here-in-before but size 450 mm sweep.
21S&F in replacement of ball bearing suitable for exhaust fan of any sweep complete all as specified & as directed. Make : NBC/SKF conforming to IS.
22S&F in replacement of brass bush suitable for exhaust fan any make/model all as per original size/shape/type conforming to IS complete all as specified & as directed.
23S&F in replacement of shaft of exhaust fan any make/model all as per original size/shape/type conforming to IS complete all as specified & as directed.
24S&F in replacement of capacitor 230V, 50Hz, 2.5 MFD for exhaust fan complete all as specified & as directed. Make : Asain/Usha/Universal/Tibcon
25S&F in replacement of capacitor 230V, 50Hz, 4.0 MFD for exhaust fan complete all as specified & as directed. Make : Asain/Usha/Universal/Tibcon
26S&F in replacement of rust proof rigid plastic body with louvers shutter complete with nuts, bolts and washer suitable for PVC Air freshener fans of size 200mm to 250mm sweep complete all as specified & as directed.
27S&F in replacement of louvers shutter complete with nuts, bolts and washers suitable for PVC Air freshener fan of size 300mm to 450mm sweep complete all as specified & as directed.
28S&F in replacement of Plastic fan blades for 200mm to 300mm sweep exhaust fan as per sample kept in AGE’s office complete all as specified & as directed.
29GEYSERS
30Taking down unserviceable geyser including bushes, washers, mounting rubbers, nuts, bolts and clamps from existing place and re-fixing at same place after repair complete all as specified & as directed.
31S&F in replacement high density polythene pipe (HDPE) connection arrangement with pipe of pressure rating 2.5kgf/cm2, 15mm bore 30cm to 45 cm long with brass unions one (Chromium plated) one on each side in repair to geyser 25/50 liters pipe shall be as per IS complete all as specified & as directed.
32S&F in replacement of thermostat switch ISI marked to geysers 25/50 liters complete all as specified & as directed.
33S&F in replacement heating element ISI marked of rating 1.5KW capacity including washers for 25 ltrs capacity geyser complete all as specified & as directed. Make : THETA/ALERT
34S&F in replacement plug top, 3pin, 15 Amps, 230 Volts, ISI marked, complete all as specified & as directed. Make : Anchor/Legrand /Havells
35S&F in repair pressure release safety valve for geysers spring loaded suitable for 15mm pipe chromium plated complete all as specified & as directed.
36S&F in replacement bib taps, cast copper alloy with crutch of butter fly handle screwed down, screwed for iron pipe of for brass ferrule, fancy type and fixed of size 15 mm dia complete all as specified & as directed.
37Summer Appliances
38Dismantling/removing the defective un-serviceable compressor of any capacity for window type AC, split type AC, refrigerators, water coolers, Deep freezers etc complete, all as specified & as directed.
39Supply installing, testing & commissioning new compressor of water cooler capacity 40/80 litres duly charged with fresh mafron gas etc, complete all as specified & directed. Make :- Voltas / Shriram / Tecumseh / Kirloskar as per existing make at site. Note:- Guarantee card with purchase voucher of original manufacturer shall be produced by the contractor before payment.
40Ditto all as per Item No. 39.00 here-in-before, but for 150/150litre capacity water cooler.
41Ditto all as per Item No. 36.00 here-in-before, but for split type AC 2 Ton capacity.
42Ditto all as per Item No. 39.00 here-in-before, but for split type AC 1.5 Ton capacity.
43Ditto all as per Item No. 36.00 here-in-before, but for refrigerator 310 litre capacity.
44M&L for detecting the gas leakage, rectifying the defects vacuuming and charging fresh Gas & commissioning and testing the window/ Split type Air conditioner unit 1.5/2.0 Ton capacity complete, all as specified & as directed.
45All as per serial item No.44.00 here-in-before, but of 310 litre capacity refrigerator.
46All as per serial item No.44.00 here-in-before, but of water cooler of any capacity.
47Removing of existing window /split type AC 1.5 / 2.0 ton capacity mounting, cleaning of evaporator and condenser with alkaline based solution, washing of AC , oiling of fan motor and re-fixing on mounting, including provision for making opening air tight and dust proof including testing and commissioning, complete, all as specified & as directed.
48S&F in replacement Running capacitor 45 to 50 MFD 230 volts, 50 Hz for window/split AC complete all as specified & as directed. Make : Tibcon/ Sharda / Epcos/ Usha
49S&F in replacement Starting capacitor 100 to 120 MFD 230 volts, 50 Hz for window/split AC, complete all as specified and directed. Make : Tibcon/ Sharda / Epcos/ Usha
50Taking down carefully the following parts from the existing AC andproviding new accessories / parts as per existing make complete, all as specified & as directed:-
51Contactor for split AC (1.5 / 2.0 TR)
52PCB for split AC (1.5 / 2.0 TR)
53Starting relay for split AC (1.5 / 2.0 TR)
54S&F in replacement Over load protector (OLP) suitable air conditioner 1.5 ton/ 2.0 Ton capacity complete all as specified & as directed. Make : SRIRAM / Ranutrol/ Indfoss
55Taking down carefully the following accessories/ parts from existing water coolers and providing new accessories / parts in theses water coolers as per existing make & details given here-in-after :-
56Filter copper
57Capillary Tube of copper existing size as per existing
58PVC water outlet pipe 15mm dia including clamps
59Drain pipe of same quality , length and dia as per existing
60S&F new condenser of size 12""x12""/12""x15""
61Taking down defective fan motor from water coolers, dismantling the old burnt winding from the motor and rewinding with super enameled copper wire as per existing size including replacement of shaft, bushes mounting rubbers, nuts bolts and re-fixing after reassembling and testing in existing water coolers for under mentioned fan motors etc complete all as specified & as directed. Make of winding wire :- Milan / Chetak Note :- The unit quoted rate shall be deemed to be included replacement of minor après such as rubber, nuts washers insulating materials and clamps etc.
62Fan motor of capacity 1/10 HP 230Volts, Single Phase
63Fan motor of capacity 1/35 HP 230Volts, Single Phase
64S&F in replacement of Fan blades made up of aluminium as per existing etc complete all as specified & as directed.
65Taking down carefully fan motor from existing water coolers and providing new fan motor 1/10 HP 230 Volts, 50 HZ including replacement of mounting legs complete all as specified & directed. Make of Fan motor :- Frac Master / Polor/Usha
66S&F in replacement push cock (stainless steel) for water cooler as per existing complete all as specified & as directed.
67S&F in replacement thermostat for water cooler of capacity 40/80 Ltr complete all as specified & as directed. Make :Indfoss/Denfoss
68S&F in replacement Starting capacitor 60 to 80 MFD 230 volts, 50 Hz for water cooler complete all as specified & as directed. Make : KELTRON / USHA / Tibcon
69S&F in replacement ofrelay with OLP suitable for water cooler complete all as specified & as directed. Make : Annapurna / Hi Tech
70S&F in replacement Flexible Core PVC insulated with stranded copper conductor 40 / 0.0076 Sqmm 3 core 600/1100 V ISI Marked complete all as specified & as directed. Make : Finolex/Havells/Plaza
71S&F in replacement 20mm bore PVC float valve for water coolers as per existing complete all as specified & as directed.
72Taking down carefully the following accessories / parts from existing refrigerator of any make of capacity 310 litres supply & fixing accessories / parts as per existing in the same refrigerators as under complete:-
73Evaporator for 310litre refrigerators.
74Filter copper.
75Capillary tubes of copper existing sizes.
76Thermostat for refrigerator 310 litre capacity.
77Relay for refrigerator 310 litre capacity.
78Vegetable tray for refrigerator of 310 litre capacity.
79M&L for proper dusting, cleaning and scrapping old painted surfaces and painting of desert cooler’s external body, fan & pump with one coat of synthetic enameled gray paint & internal body with synthetic enameled black paint complete with brush painting complete all as specified & as directed.
80S&F in replacement Submersible pump 1.65 mtr head , 18 watt, 230 volts, 50 Hz withfor Desert coolers all as specified and directed. Make :- KHAITEN / SUMMER KING/Shakti
81S&F in replacementFanmotor kit 1/6 to 1/8 HP 230 Volts 50 Hz for Desert cooler including replacement of mounting legs etc complete all as specified and directed. Make :- KHAITEN / SUMMER KING/Shakti
82Taking down carefully fan motor 1/6 to 1/8HP 230 volts, 50Hz from existing desert coolers and re-fixing the same fan motor after rewinding with super enameled copper wire of existing size including replacement of mounting legs complete all as specified & directed. Make of winding wire :- Milan / Chetak
83S&F in replacement of capacitor for desert cooler 4MFD 230 volts complete all as specified and directed. Make:- Asian / Tibcon/ Usha/ Universal
84S&F in replacement of front grill including nuts & bolts and washers suitable for 18/20" sweep desert coolers complete all as specified & as directed.
85S&F in replacement wooden shelving padfor Desert cooler each set weighting not less than 500 grams etc complete all as specified & as directed. Note :Each set have a three pad.
86S&F in replacement supporting jali for desert coolers etc complete all as specified & as directed. Note :Each set have a three jali.
87S&F in replacement fan blades mode of aluminium for desert cooler etc complete all as specified and directed.
88Supply and fix in replacement PVC flexible pipe (from vertical pump to distributer and distributer to panel) 15mm dia for Desert cooler including 3 way distributor junction tee set etc complete all as specified & as directed.
89Supply and fix in replacement Desert Cooler Fan regulator for 4000 to 5000 cum/Hr Desert Cooler capacity of various makes all as per existing etc complete all as specified and directed. Make:- KHAITAN / SUMMER KING/Shakti
90Supply and fix in replacement Switch Piano 5 Amp single pole 230 volt etc complete all as specified and directed. Make :- Anchor/kinjal/plaza/Cona/SSK/Leader
91S&F in replacement PVC Lead wire 1.5 sqmm stranded copper conductor 1.5 sqmm 3 core ISI Marked etc complete all as specified and directed. Make : Finolex, Havells
92S & F Plug top for desert cooler 3 pin 5 Amps, 230 Volt AC, ISI marked etc complete all as specified and directed. Make :Anchor / Plaza
93S&F in replacementsingle pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 25 Amps MCB, 240 volt complete all as specified and directed. Make : Havells/L&T/HPL
94S & F in replacement MCB suitable for 6 to 32 Amps, 240 Volt AC supply, SPN, with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed. Make:-Legrand /L&T/ Indo Asain / C&S
95Supply and fix desert cooler of size 24 x 24 x 30 inch having nominal air flow capacity 4000 cubic meter per hour single phase 240 volts 50 Hz made out of plain GI sheet 18 SWG & side panels of 22 SWG , fixed on location and connecting complete all as specified and directed.
96Supply and fix Plastic body desert cooler 155 watt, 230 volts, 50 Hz having tank capacity 70 ltr for room size upto 35 Sqmtr (375 sqft) with auto louver movement including stand having 4 Nos of caster wheel , dimension 65 x 64 x 84 cm etc complete all as specified and directed. Make : Symphony Jumbo 70 or similar in Havells / Bajaj.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail