Uttar Pradesh Housing And Development Board-UPAVP has published Electrical / Mechanical Work At 100 Bedded Hospital Gramsabha Shivshat Raniganj Distt. Pratapgarh- 1 Internal Electrification Workwiring Point For Light With 1.5 Sq. Mm.Frlsh Pvc Insulated Multistrand Single Core Copper Conductor Cable In Pvc Conduit. Submission Date for this Tender is 17-05-2022. Electrification Work Tenders in raniganj Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Internal Electrification Work Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sqmm FRLSH PVC Insulated multistrand copper conductor cable as earth wire drawn inside the conduit with GP Box, modular type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. PWD SOR 2018 SI No 138(C)+187(A) |
| 2 | Wiring point for two way light with 1.5 sq. mm. FRLS PVC insulated multistrand single core copper conductor cable in heavy guage PVC conduit. pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting complete with 1.5 sq. mm. FRLSH PVC insulated multistrand copperconductor cable as earthwire drawn inside the conduit, GP box and 2No. two way modular type switches and ceiling rose /angle /batten holder on 3 mm. thick phenolic laminated backlite sheet etc. complete in all respects, as directed including matching colour wash.PWD SOR 2018 SI No 139(C) + 187(B) |
| 3 | Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earth wiredrawn inside the conduit withmodular type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash. PWD SOR 2018 SL No 140(C )+ 187(A) |
| 4 | Wiring point for Call Bell with 1.5 sq. mm. FRLS PVC insulated multistrand single core copper conductor cable in heavy guage PVC conduit. pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting complete with 1.5 FRLSH PVC insulated multistrand copperconductor cable as earthwire drawn inside the conduit, GP box and modular type bell push or 2 pin shocket etc complete in all respects, as directed including matching colour wash. PWD SOR 2018 SI No 142(C) + 187(E) |
| 5 | Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand copper onductor cable in PVC Conduitpartly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earth wiredrawn inside the conduit and modular type switch and socket etc., complete in all respect including matching colour wash.PWD SOR 2018 SL No 141(C )+ 187(A) |
| 6 | Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit partly laid in slab alongwith the reinforcement before concreting and partly concealed in wall with 1 nos. 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect. including matching colour wash. PWD SOR 2018 SL No 1307(C ) |
| 7 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting with one no. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit including matching colour wash etc. complete in all respect. PWD SOR 2018 SL No 221(C ) |
| 8 | Supply and wiring of sub main with two number 6.0 sq.mm FRLSH PVC insulated 1100 V grade multstrand single core copper conductor cable in 20 mm dia heavy duty(2mm thick) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement before concretiing with 1 no. 4.0 sq.mm. FRLSH PVC insulated multstrand copper conductor cable as earth continuity wire drawn iin conduit including matching colour wash. Complete in all respect PWD SOR 2018 SI No 222(C) |
| 9 | Supply and wiring of 4 number 6 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting with 2 nos 4 sq.mm. FRLSH PVC insulated copper conductor cable as earth continuity wire drawn in conduitincluding matching colour wash etc. complete in all respect..PWD SOR 2018 SL No 278(C ) |
| 10 | Supply and wiring of 4 number 10 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting with 2 nos 6 sq.mm. FRLSH PVC insulated copper conductor cable as earth continuity wire drawn in conduitincluding matching colour wash etc. complete in all respect..PWD SOR 2018 SL No 278(C ) |
| 11 | Supply and wiring of sub main with 4 number 16.0 sq.mm FRLSHPVC insulated 1100 V grade multstrand single core copper conductor cable in 40mm dia PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting with two number 10 sq.mm. RLSH PVC insulated copper conductor cable as earth continuity wire drawn in conduitincluding matching colour wash etc. complete in all respect. PWD SOR 2018 SI No 279 (C) |
| 12 | Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0 mm thick ISI Marked G.P. sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round Zink coated M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labor, T&P etc. required for proper completion of the work .PWD SOR 2018 S.I.No. 1149 |
| 13 | Supply and fixing of LED Tube Light with metal heavy duty box type batten light fitting 1 X 22 watt suitable for upto 1x22 watt LED polycarbonate tube light complete including tube suitabe for both surface & suspended complete in all respect. 2420 system lumens, 110Lm/watt PF>0.95, THD<10% CRI>80, Sheet Thicknes 0.8mm, Tube with aluminium heat with 5 year warrantee. PWD SOR 2018 SL No 1434 CAT-AAA |
| 14 | Supply and fixing of recess/Surface mounting round 18 watt to 20 watt cut out min 150 mm Height Min 40 mm, LED Down Lighter having powder coated die cast aluminium housing with heat sink diffuser/reflector and driver set suitable for 24 Hr continuous operation, compelete in all respect. PWD SOR 1980-2200 system lumens, 110Lm/watt PF>0.95, THD<10% at full load, CRI>80, with 5 year warrantee. SI no. 1403 |
| 15 | Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect. Si No. 1417 Cat-AAA |
| 16 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.PWD SOR 2018 S.I.No. 1406 CAT A |
| 17 | Making hole in the wall for exhaust fan and finishingproperly complete in allrespect.PWD SOR 2018 S.I.No. 1121 |
| 18 | Supply and erection of 300 mm Sweep AC 230/250 Volts, 50 Hz Exhast fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required connection etc. complete as required MR |
| 19 | Supply and erection of 400 mm Sweep AC 230/250 Volts, 50 Hz wall fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required connection etc. complete as requiredMR |
| 20 | Supply and fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. PWD SOR 2018 S.I.No. 1203 (C ) |
| 21 | Supply and Erection of Ceiling Fan with motor of AC Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS: 1709/ 1984 with latest amendment. The rated voltage 220/240 Volts, 50Hz 1-Ph AC the fan assemble should consists of down rod, blades, shackle, canopies etc and with double ball bearing system .PWD SOR 2018 SI No 1501+ 1115 BEE 5 Star rated- 1200 mm sweep |
| 22 | S/F of 3mm thick bakelite sheet cover round/hexagonal Type for fan box complete with all material, Labour T&P as per direction of E/I. |
| 23 | S/F of 3mm thickAl. Sheet junction box cover complete in all material labour T&p as per direction of E/I. |
| 24 | Supply and fixing of surface/ Flush mounting 8 way TPN distribution Board with additional metal door without MCB complete in all respect and directed at site by E/I. PWD SOR 2018 SI No 1027(A)CAT-A |
| 25 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve PWD SOR 2018 SI No 1002 CAT-A |
| 26 | S&F of 63 Amp. 4 PoleSPMCB (10 KA) C Curve PWD SOR 2018 SI No 1007 |
| 27 | Supply and fixing of power plug with 20 Amp./250 voltflush type modular switch and 5 pin 20 A/250 volt flush type universal modular socketswitch on concealed M.S boxincluding supply of all material, labour T&P etc. required for proper completion of work. PWD SOR 2018 SI No 1139(A) |
| 28 | S & F sheet steel enclosure surface / Flush mounting fitted with 30Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respect. as directed at site byEngineer in charge.1031 (A) |
| 29 | Supply and burring of Safe Earthing Electrode T-39 Zn Zinc Coated, Length 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra Make: As approved in U.P. P.W.D., & C.P.R.I. Certified PWD SOR 2018 SI No 726 (D) |
| 30 | Supply and laying of 25 mm x 3 mm G.I srtip form earth electrode directly in the ground as required complete in all respects. PWD SOR 2018 SI No 716 |
| 31 | Providing, laying and fixing 100mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. DSR 2018 SI No 14.13.3 |
| 32 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD SOR 2018 SI No 501 |
| 33 | 10 Sq mm 4 Core |
| 34 | 16 Sq mm 4 Core |
| 35 | 70 Sq mm 3.5 Core |
| 36 | 95 Sq mm 3.5 Core |
| 37 | 240 Sq mm 3.5 Core |
| 38 | 300 Sq mm3.5 Core |
| 39 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-Incharge.PWD SOR 2018 SI No 503 |
| 40 | 10 Sq mm 4 Core |
| 41 | 16 Sq mm 4 Core |
| 42 | 70 Sq mm 3.5 Core |
| 43 | 95 Sq mm 3.5 Core |
| 44 | 240 Sq mm 3.5 Core |
| 45 | 300 Sq mm3.5 Core |
| 46 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respects as per direction of the Engineer incharge.PWD SOR 2018 SI No 504 |
| 47 | 10 Sq mm |
| 48 | 16 Sq mm |
| 49 | 35 Sq mm |
| 50 | 50 Sq mm |
| 51 | 70 Sq mm |
| 52 | 95 Sq mm |
| 53 | 120 Sq mm |
| 54 | 240 Sq mm |
| 55 | 300 Sq mm |
| 56 | Supply and fixing of call bell of approved make on polished MDFEG / Teak ply board including making connections etc. complete in all respect. PWD SOR 2018 SI No 1101 |
| 57 | Supply of Franklin france make advanced piezoelectric Exciter Device Based lighting protection system suitable for protection of building against direct lightning strike complete with ealy streamer emission with piwezoelectric device for corona effect) stainlles steel lighting conductor air terminal with event counter with sensitivity 1 KA to 100 KA for 8.20 micro second impulse for 1 KA control over the release of ions-positive or negative without additional power supplies requirement required complianece with IP53 enclosures) |
| 58 | Saint Elmo lightening conductor with discharge counter (sensitivity 1 KA, 8/20 microsecound with IP 53 Enclosures) |
| 59 | Elevation Rod : 2M. AFC2001 Two elevation rods for are required for mounting a one lightening conductor MR |
| 60 | Installation of Franklin france make external Lightening protection system. |
| 61 | SSupply and fixing of vertical down conductor of 32mm x 6mm G.I. strip etc. on approved clamps on surface for lightning conductor complete in all respects (for two storeyed Buildings).P.W.D.S.O.R. 2018 S.I. No.713( C) |
| 62 | Supply and fixing of testing joint of G.I. strip 32mm x 6mm and 150mm long with G.I. bolts and nut etc. complete in all respect.P.W.D.S.O.R. 2018 S.I. No.719 |
| 63 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections but excluding modular plate etc as required. Telephone socket outlet DSR No 1.24.6 |
| 64 | Supply and fixing of G.P. Modular switch box for 1 / 2 Module of approved make made up of 1.0 mm thick ISI Marked G.P.sheet including adjestable Nakka and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. P.W.D.S.O.R. 2018 S.I. No.1152(A) |
| 65 | 1 or 2 Module (75mm X 75 mm) |
| 66 | Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. DSR No 1.18.2 |
| 67 | 2 Pair |
| 68 | Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge. SOR 2018 Si No. 148(A) |
| 69 | Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality SOR 2018 Si No. 1136 |
| 70 | S & F sheet steel enclosure for T.P./Four Pole MCB. SOR 2018 Si No. 1033 |
| 71 | S&F of 63 Amp. 4 pole MCB(10 KA) C Curve SOR 2018 Si No. 1020 (A) Cat-AAA |
| 72 | Fire Fighting System Providing, laying, testing & commissioning of "C" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : DSR & AOR 2019 SI No 7 |
| 73 | 200 mm dia |
| 74 | 150 mm dia |
| 75 | 100 mm dia |
| 76 | 80 mm dia |
| 77 | 65mm dia |
| 78 | 50mm dia |
| 79 | 40mm dia |
| 80 | 32mm dia |
| 81 | 25 mm dia |
| 82 | Providing laying, testing & commissioning of "C" class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. DSR & AOR 2019 |
| 83 | 200 mm dia SI No 6.1 |
| 84 | 150 mm dia SI No 6.2 |
| 85 | Supplying,fixing, testing and commissioning of Manual Swing TypeHose Reel IS:444 complete with heavy duty reel, 20 mm dia. X 30 Mtr long, PVC pressure hose pipe , Red Coloured, SS jet nozzel, 25mm. isolating valve and all other neccessary fixing accesories complete in all respect. DSR No 17:1 |
| 86 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : as per DSR & AOR 2019 S.I. No. 9.1 |
| 87 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : DSR & AOR 2019SI No. 18.1 |
| 88 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : DSR & AOR 2019 SI.No.16.1 |
| 89 | Providing and fixingHose Box (600x300x200)size of suitable size made out of 16/18 SWG thick having central opening and 4 mm thick glazed glass Double door including necessory rubber beading key pocket, handle locking arrengment painting with polyurethene based red paint etc. The words "FIRE HOSE" to be painted on the dooor as per approved drawing complete in all respect. MR |
| 90 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : |
| 91 | 2 way - 100 mm dia M.S. Pipe SI No. 19.1 |
| 92 | Supply, fixing, testing and commissioning of 25mm Ball Valve complete. MR |
| 93 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. DSR & AOR -2019 SI No. 20 |
| 94 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 (b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-"F" insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads.Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.1620 lpm at 70 m Head DSR & AOR2019 SI No. 1.8 |
| 95 | Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.Make :- Kirloskar/ other Standard make.DSR No. 2.8 1620 lpm at 70 m Head |
| 96 | Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) a) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-"F" insulation, conforming to IS : 325. c) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. Make Kirloskar/other standard make DSR NO. 3.2 180 lpm at 70 m Head |
| 97 | Automatic Control Panel(s) Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. Outgoing Main Fire Pump : 125 A 50KA TPN MCCB Jockey Pump : 63 A , 50KA TPN MCCB, Diesel Engin Control Complete in All Respect DSR NO. 5.1 |
| 98 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. DSR & AOR-2019 SI No. 22 |
| 99 | Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required DSR-2018 SI No. 16.8 |
| 100 | SITC of foot valves with strainer at the suction pipe of fire pumps (in case of negative suction only). Make Kalpana/KartarSir/Advance or Equivalent |
| 101 | 150mm dia |
| 102 | 100mm dia |
| 103 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : DSR & AOR -2019 SI No 11 |
| 104 | 150 mm dia |
| 105 | 100 mm dia |
| 106 | 80 mm dia |
| 107 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : DSR & AOR2019 SI No. 14 |
| 108 | 150 mm dia |
| 109 | 100 mm dia |
| 110 | Supply and fixingof C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labourfor proper completionof work.PWD SOR 2018 SI No 1132 |
| 111 | Supply and fixingof fire extinguisher,ABC Type 6.00 kg. capacity(ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labourfor proper completionof work.PWD SOR 2018 SI No 1131(A) |
| 112 | Supply and fixing of self glow type exit sinage. |
| 113 | SITC ofSprinkler 68° deg, complete in all respects. (Make:- OMEX/ Life Guard/Safex) DSR 2019 Si No. 21.1 Pendent Type |
| 114 | Fire Alarm SystemWork Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card,minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. DSR 2018 SI No 17.2.1.1 |
| 115 | Ten Loop Panel. |
| 116 | Supplying, installation, testing & commissioning of intelligent analog addressable photo thermal detector complete with mounting base complete as required. DSR 2018 SI No 17.2.4 |
| 117 | Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.DSR 2018 SI No 17.2.5 |
| 118 | Supplying, installation, testing & commissioning of addressable phone control module complete as required. DSR 2018 SI No 17.2.11 MakeINNEL/SIMPLEX/TYCO |
| 119 | Supplying, installation, testing & commissioning of addressable manual call point complete as required. DSR 2018 SI No 17.2.14 |
| 120 | Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. DSR 2018 SI No 17.2.15 |
| 121 | Supplying, installation, testing & commissioning of addressable fire control module complete as required. DSR 2018 SI No 17.2.10 |
| 122 | Supplying, installation, testing & commissioning of faultisolator complete with base as required. DSR 2018 SI No 17.2.7 |
| 123 | Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset ackowledge and silence switches complete as required.DSR 2018 SI No 17.2.3 |
| 124 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.. DSR 2018 SI NO. 17.5.2 |
| 125 | Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD SOR 2018 SI No 501 |
| 126 | 150 Sqmm 3.5 Core |
| 127 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-Incharge.PWD SOR 2018 SI No 503 |
| 128 | 150 Sqmm 3.5 Core |
| 129 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respects as per direction of the Engineer incharge.PWD SOR 2018 SI No 504 |
| 130 | 70 Sq mm |
| 131 | 150 Sqmm |
| 132 | Supplying, installation, testing & commissioning of 6 zone,voice alarm controller with USB, MP3 player (including 6 zonebutton paging station) with seamless integration facility withmain fire alarm panel for voice evacuation complete asrequired DSR-2018 SI.No.17.3.1 |
| 133 | Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.DSR-2018 SI.No.17.3.3 |
| 134 | Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required.DSR-2018 SI.No.17.3.6 |
| 135 | Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.DSR-2018 SI.No.17.3.9 |
| 136 | Street Light Work Supply and fixing of 7.0 meter long G.I. Octogonal pole top dia 70 mm bottom dia 130 mm andbase plate 12 mm thick having3 mm thickness with single arm braclet (1 meter length ) on RCC foundatoion including the cost of foundation ,foundation bolts, excavation & baack filling and Required T&P complete fn all respect PWD SOR 2018 S.I. No 641 |
| 137 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect PWD SOR 2018S.I.No. 1424 Cat- AAA |
| 138 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required DSR 2018 SI No. 14.13.3 |
| 139 | 100 mm dia |
| 140 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors , HRC fuses, isolatingswitch metering intrument & instrument box with CTs etc. in case of tpn, comp;ete in all respect PWD SOR 2018 S.I.No. 807 |
| 141 | 40 A TPN |
| 142 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR 2018 S.I.No. 716 |
| 143 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PWD SOR 2018 S.I.No. 725 (A) |
| 144 | Tubewell Work Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart! bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. DSR-2019 SINo. 23.1.1 |
| 145 | 350 mm dia upto 60 MSINo. 23.1.1.2 |
| 146 | 60-90 MSI No. 23.1.1.1 |
| 147 | 90-150 MSI No. 23.2.1.2 |
| 148 | 150-220 MSI No. 23.2.1.2 |
| 149 | 220-300 M |
| 150 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. DSR-2019 si No. 23.10 |
| 151 | 150 mm nominal size dia having minimum wall thickness 5.00 mm SI No. 23.10.2 |
| 152 | 200 mm nominal size dia having minimum wall thickness 5.40 mm SI No. 23.10.3 |
| 153 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mru, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fitting & accessories, all complete, for all depths, as per direction of Engineer -in-charge. DSR-2019 SI No. 23.11 |
| 154 | 150 mm nominal size dia SI No. 23.11.2 |
| 155 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assemblv of tube well as oer IS:2800 (Dart n.DSR-2019 SI No. 23.15 |
| 156 | 150 mm dia SI No. 23.15.2 |
| 157 | Providing and fixing M.S. clamp of required dia to the top of casing! housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. DSR-2019 SI No. 23.14 |
| 158 | 200 mm clamp SI No. 23.14.3 |
| 159 | Supplying, filling, spreading & leveling" gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of" Engineer-in-charge. DSR-2019 SI No. 23.6 |
| 160 | Development of tube well in accordance with IS : 2800 (part 1) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, ilc disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer- in-charge DSR-2019 SI No. 23.12 |
| 161 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing! casing pipe, rmovable as per requirement, all complete for borewell of: DSR-2019 SI No. 23.13 |
| 162 | 200 mm dia SI No. 23.13.3 |
| 163 | 500 LPM 52 M head of K S B make Submersible Pumping Plant |
| 164 | submersible pump set. |
| 165 | Switch Gear |
| 166 | Main piping and valves |
| 167 | Pressure & Depth gauge |
| 168 | Lifting tackle |
| 169 | Installation |
| 170 | Commissioning |
| 171 | Painting |
| 172 | Testing |
| 173 | Supply of Aquas make electronic Chlorinator of 6LPH capacity complete accessories and 100 Ltr, PVC solution tank. |
| 174 | Installation charges (1/2" socket fixed in pipe line to provide by the department, |
| 175 | SITC OF 20 PASSENGER STRETCHER LIFT 2 STOP, 2 OPENING AT SAME SIDE WITH SS HAIRLINE FINISH FULLY AUTOMATIC GATE WITH SIDE OPENING ALONG WITH ACV3 CONTROLLER AND GEARLESS MACHINE NO. OF LIFT - SPEED - 1.0 M/S LOAD - 1360 KG CAPACITY - 20 PASSENGER FLOOR - G + 1 CAR TRAVEL - 7000 MM HOIST WAY DIMENSION - 2400MM WIDE x 2800MM DEEP (REQUIRED) OVERGEAD - 4500 MM PIT DEPTH - 1500 MM CAR DIMENSION - 1300MM WIDE x 2400MM DEEP x 2200MM HIGH DOOR OPENING - 1000MM WIDE x 2000MM HIGH ELECTRIC SUPPLY - 415 Volts, 3 Phase, 50Hz, AC |
| 176 | Main LT Panel Design, Manufacturing, Supply Installation, Testing & Commissioning of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel shall withstand the fault level of 25kA. a) 1 No. Incoming 1250A FP 50kA Manually Operated Drawout type ACB with Numerical O/C, S/C& E/F Release, CT, Metering, compelete with all fuses wiring etc and as per SLD. For 630kVA CSS Incomer b) 1 No. Outgoing 630A 35kA TP MCCB with extended RHOM along with O/C & S/C Protection along with Ammeter with Ammeter Selector Switch, CT etc. c) 1 No. Outgoing 400A 35kA TP MCCB d) 3 Nos. Outgoing 250A 25kA TP MCCB e) 4 Nos. Outgoing 200A 25kA TP MCCB f) 4 Nos. Outgoing 160A 25kA TP MCCB g) 1 No. Outgoing 125A 25kA TP MCCB h) 2 Nos. Outgoing 100A 25kA TP MCCB i) 3 Nos. Outgoing 63A 25kA TP MCCB |
| 177 | Normal Floor Panels Supply Installation, Testing & Commissioning of Normal Floor Panels suitable for 433 V, 3 phase, 4 wire, 50 Hz. The panel / DBshall be Indoor, sheet metal clad, cubicle, dead front, dust and vermin prooffabricated out of CRCA sheet steel, complete with colour coded, bus bars and separate earth connection of adequate capacity. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable box/ alley. The panel/ DBshall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panelshall withstand the fault level of 10kA. |
| 178 | Ground Floor Panel (Wing "A") - Normal Supply a) 1No. Incoming 160A (16kA) FP MCCB with Standard Incomer Metering b) 7 Nos. Outgoing 63A FP MCB (10kA) |
| 179 | Ground Floor Panel (Wing "B") - Normal Supply a) 1No. Incoming 200A (16kA) FP MCCB with Standard Incomer Metering b) 2 Nos. Outgoing 63A TP MCCB (16kA) b) 6 Nos. Outgoing 63A FP MCB (10kA) |
| 180 | Ground Floor Panel (Wing "C") - Normal Supply a) 1No. Incoming 250A (16kA) FP MCCB with Standard Incomer Metering b) 1 Nos. Outgoing 100A TP MCCB (16kA) c) 6 Nos. Outgoing 63A FP MCB (10kA) |
| 181 | First Floor Panel (Wing "A") - Normal Supply a) 1No. Incoming 160A (16kA) FP MCCB with Standard Incomer Metering b) 7 Nos. Outgoing 63A FP MCB (10kA) |
| 182 | First Floor Panel (Wing "B") - Normal Supply a) 1No. Incoming 160A (16kA) FP MCCB with Standard Incomer Metering b) 7 Nos. Outgoing 63A FP MCB (10kA) |
| 183 | First Floor Panel (Wing "C") - Normal Supply a) 1No. Incoming 200A (16kA) FP MCCB with Standard Incomer Metering b) 2 Nos. Outgoing 63A TP MCCB (16kA) c) 6 Nos. Outgoing 63A FP MCB (10kA) |
| 184 | Emergency Floor Panels Design, Manufacturing, Supply Installation, Testing & Commissioning of Emergency Floor Panels / VTPN DB suitable for 433 V, 3 phase, 4 wire, 50 Hz. The panel / DBshall be Indoor, sheet metal clad, cubicle, dead front, dust and vermin prooffabricated out of CRCA sheet steel, complete with colour coded, bus bars and separate earth connection of adequate capacity. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable box/ alley. The panel/ DBshall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel/ DBshall withstand the fault level of 10kA |
| 185 | Ground Floor Panel (Wing "A") & (Wing "B") - Emergency Supply a) 1No. Incoming 100A (16kA) FP MCCB with Standard Incomer Metering b) 7 Nos. Outgoing 40A FP MCB (10kA) |
| 186 | Ground Floor Panel (Wing "C") - Emergency Supply a) 1No. Incoming 125A (16kA) FP MCCB with Standard Incomer Metering b) 1Nos. Outgoing 63A TP MCCB (16kA) c) 6 Nos. Outgoing 40A FP MCB (10kA) |
| 187 | First Floor Panel (Wing "A") - Emergency Supply a) 1No. Incoming 125A (16kA) FP MCCB with Standard Incomer Metering b) 1 Nos. Outgoing 63A TP MCB (10kA) c) 6 Nos. Outgoing 40A FP MCB (10kA) |
| 188 | First Floor Panel (Wing "B") & (Wing "C")- Emergency Supply a) 1No. Incoming 160A (16kA) FP MCCB with Standard Incomer Metering b) 2 Nos. Outgoing 63A TP MCCB (16kA) b) 7 Nos. Outgoing 40A FP MCB (10kA) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
