Procurement Of Measuring Instruments For Hooghly Cochin Shipyard Limited, Nazirgunge Unit, Howrah-Vernier Caliper - 0-150Mm , Outside Micrometer ( 0 — 150Mm ) , Inside Micrometer ( 50 - 1000Mm ) , Bore Gauge ( 150 - 250Mm ) , Thickness Gauges ( 0.05Mm To 1Mm, 28 Leaves ) , Dial Indicators ( Measuring Range 10Mm ) ( Shock Proof, Graduation: 0.01Mm, Measuring Range: 10Mm ) , Magnetic Stand ( Suitable For Standard Size Dial Indicators ) 1, Dft Gauge ( Ferrous & Non-Ferrous Type ) ( Standard Body, Probe, Zero Plate ) , Digital Multimeter ( Ac / Dc Voltage: 1000V, Ac / Dc Current: 10A, Frequency: 0.5Hz To 200Khz ) , Digital Clamp Meter ( Ac Current Range: 40A / 600A / 1000A, Resolution: 0.01A / 0.1A / 1A. Dc Current Range: 40A / 600A / 1000A, Resolution: 0.01A / 0.1A / 1A. Ac / Dc Volt: 600 / ) , Digital Clamp Meter ( Ac Current Range: 40A / 600A / 1000A, Resolution: 0.01A / 0.1A / 1A. Dc Current Range: 40A / 600A / 1000A, Resolution: 0.01A / 0.1A / 1A. Ac / Dc Volt: 600 / ) , Digital Infra-Red Thermo Meter ( -30 Deg C To 500 Deg ) ( Temperature Range: -30 Deg C To 500 Deg C Min, Accuracy: For A 0 °C, + 1.5 °C Or + 1.5 O / F Of Reading, Whichever Is Greater, Distance To Spot Ratio: 10:1 Min, Response Time: <500Ms, Battery Life: Min 10 Hrs With Laser And Back Light On ) , Auto Level With Aluminium Telescopic Tripod ( Setting Accuracy-0.3 In, Magnification32x ) , 23 Laser Distance Meter With Ac Charging Facility ( Measuring Range-200M, Measuring Accuracy +- 2 Mm ) 1 No 24 Bridge Cam Weld Gauge ( Range : 0-25 Mm ) 1 No 25 Professional Line Laser With Self Levelling 120M Range With Receiver ( Allow For Simultaneous Horizontal And Vertical Levelling Applications , Selflevelling ( 4° In 4 Sec ) , Precise ( ± 0.2 Mm / M ) 1 No 26 Non-Contact And Contact Tachometer ( Photo : 5 To 99, 999 Rpm., Contact : 0.5 To 19, 999 Rpm., Accuracy ± ( 0.05 % + 1 Digit ) . 1 No 27 Elcometer / Dewpoint Meter / Weather Gauge ( Reading Parameters - Rh, Ta, Ts ( Te6 ) , Td, Tδ, Tdb, Twb1, Sh1, Air Temperature ( Ta ) Range-20 To +80°C ( -4 To +176°F ) ) 1 No 28 Steel Rule- ( Range- 0 To 300 Mm ) 1 No 29 Steel Rule- ( Range- 0 To 1000 Mm ) 1 No 30 Telescoping Inspection Mirror ( Length : 178~505Mm Material : Steel Size : 32Mm ) 1 No 31 Led Rechargeable Flashlight ( Capacity: 2000Mah, Battery Type: Lithium Ion ) 1 No 32 Taper Gauge ( Range 1-15Mm Gap, Stainless Steel ) 1 No 33 Measuring Tape ( 100M ) 1 No 34 Measuring Tape ( 50M ) 1 No 35 Measuring Tape ( 15M ) 1 No 36 Steel Open Reel Dip Measuring Tape ( Tape Length 10 M - 30M Tape Width 13Mm ) 37 Hygrometer ( Whirling ) In Metric Degree Celsius ( Range - -5°C To 50°C ) 1 No 38 Digital Surface Profile Guage ( Integral Guage E224c-Bl ) ( Measurement Range 0- 500Μm ( 0-20Mils ) ( Operating Temperature Range -10 To 50°C ( 14 To 122°F ) 1 No 39 Automatic Pull-Off Adhesion Gauge ( Operating Range 8 - 100Mpa ( 1200 - 14400Psi ) With Pressure Accuracy ±1% Of Full Scale 1 No 40 Cond Meter ( Horiba Laquatwin Ec- 33 ) With Temperature Calibration: 5 To 40.0 ºc And Operating Conditions: 5 To 40°C, 85% Or Less Relative Humidity
