Dakshinanchal Vidyut Vitran Nigam Limited-DVVNL has published Development Of Distribution Infrastructure At Jhansi Zone ( Electricity Distribution Circles- Jhansi Urban, Jhansi Rural, Lalitpur And Orai ( Jalaun ) [ District-Jhansi, Lalitpur And Jalaun ] Of Uttar Pradeshstate Under The Revamped Re. Submission Date for this Tender is 14-06-2022. Casks Barrels and Drums Tenders in jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 26-May-2022 | Date Extension | Date | 14-06-2022 |
Sl. No. | Item Description |
1 | SUPPLY OF ITEMS |
2 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
3 | 9 Meter long STP as per Approved Drawing and Technical specification (SP-33) |
4 | 11 Meter long STP as per Approved Drawing and Technical specification (SP-55) |
5 | 13 Meter long STP as per Approved Drawing and Technical specification (SP-72) |
6 | Stone Pad (300x300x75mm) |
7 | 1 core (Al.) 120mm2 LT Armoured XLPE Cable |
8 | 1 core (Al.) 95mm2 LT Armoured XLPE Cable |
9 | 1 core (Al.) 50mm2 LT Armoured XLPE Cable |
10 | 1 core (Al.) 25mm2 LT Armoured XLPE Cable |
11 | 11 kVXLPE Cable 3x185 Sq. mm. (Armoured) |
12 | 1x25 mm2 PVC insulated Al. LT Cable for energising the distribution boxes. |
13 | 1x25 mm2 Armoured XLPE insulated Al. LT Cable for energising the distribution boxes. |
14 | Armoured Service Cable 2CX4 SQMM For Single phase consumer |
15 | Armoured Service Cable 2CX6 SQMM For Single phase consumer |
16 | Armoured Service Cable 4CX10 SQMM For Three phase consumer |
17 | Armoured Service Cable 4CX16 SQMM For Three phase consumer |
18 | LT ABC 3x120+1x95+1x16 sq.mm. (Bare Massenger Wire) |
19 | LT ABC 3x50+1x35+1x16 sq.mm. (Bare Massenger Wire) |
20 | LT ABC 3x95+1x70+1x16 sq.mm. (Bare Massenger Wire) |
21 | LT PVC cable 3.5x150 Sq mm |
22 | LT PVC cable 3.5x70 Sq mm |
23 | LT PVC cable 4x16 Sq mm |
24 | L.T. PVC cable 10 Sq. mm Single Core |
25 | LT PVC cable 3.5x400 Sq mm |
26 | ACSR Rabbit Conductor |
27 | Aluminium binding wire - 6 SWG |
28 | Jointing sleave |
29 | Mid Span Joint 120mm2 |
30 | ACSR Rabbit Conductor -Jumpering Works |
31 | ACSR Weasel Conductor-Jumpering Works |
32 | 11 KV Danger Board with Clamp and Nuts & Bolts |
33 | 11 KV Number Plate with Clamp and Nuts & Bolts |
34 | 11KV Fuse Set (Drop out) with clamps |
35 | 11KV TPMO with fixing clamps |
36 | 10 KVA, 11KV/250 V, 1 Ph Transformer as BEE standard (Self protected). |
37 | 16 KVA, 11KV/250 V, 1 Ph Transformer as BEE standard (Self protected). |
38 | 25 KVA , 11/0.433 KV T/F (BEE Standard 3 Star Rating Self Protected Aluminium Wound Type) |
39 | 63 KVA , 11/0.433 KV T/F (BEE Standard 3 Star Rating Self Protected Aluminium Wound Type) |
40 | 100 KVA , 11/0.433 KV T/F (BEE Standard 3 Star Rating Self Protected Aluminium Wound Type) |
41 | LT Distribution Box withMCCB for protection of 10 KVA T/F and Bus Bar foroutgoing consumer connections and suitable to house Energy meter (without Energy meter) (Deep drawn Type) as per TS. |
42 | LT Distribution Box withMCCB for protection of 16 KVA T/F and Bus Bar foroutgoing consumer connections and suitable to house Energy meter (without Energy meter) (Deep drawn Type) as per TS. |
43 | LT incoming Panel with AMI metering (Smart Meter compitable with System) equipment & fixing arrangement (As per TS ). (Deep Drawn Type) for 25KVA |
44 | LT incoming Panel with AMI metering (Smart Meter compitable with System) equipment & fixing arrangement (As per TS ). (Deep Drawn Type) for 63 KVA |
45 | LT incoming Panel with AMI metering (Smart Meter compitable with System) equipment & fixing arrangement (As per TS ). (Deep Drawn Type) for 100KVA |
46 | LT incoming Panel with AMI metering (Smart Meter compitable with System) equipment & fixing arrangement (As per TS). (Deep Drawn Type) for 250KVA |
47 | 4 core LT MCB with box |
48 | Copper L-Piece 50x225x10mm |
49 | Copper L-Piece 50x225x12mm |
50 | Al Leg long barrel off size |
51 | 9 KV LA , 5 KA (Distribution Class) |
52 | 9 KV LA , 10 KA (Station Class) |
53 | Earthing Coil connected with nutbolt using Charchol and Salt |
54 | GI Flat 50X6 for Earthing |
55 | GI Flat 25X3 for Earthing |
56 | Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
57 | GI Pipe 6" Diameter with clamps |
58 | G.I. Barbed Wire |
59 | G.I. Wire No. 16 SWG for binding |
60 | G.I. Wire 6 SWG |
61 | G.I. Wire 8 SWG |
62 | 33 KV G.I. Pin (10 KN) with nuts & washers |
63 | 11 KV Disc Fitting B & S type (45 KN) |
64 | 11 KV Disc. Insulators B&S type 45 KN (Polymer Type) |
65 | 11 KV Pin Insulator Polymer Type as per TS |
66 | 33 KV Pin Insulator |
67 | LT Shackle Insulator |
68 | Insulating Piercing Connector (50-150 sq.mm) |
69 | Insulating Piercing Connector (16-150 sq.mm) |
70 | Dead End clamp (Insulated) |
71 | End Cap for AB cable |
72 | Suspension clamps (Insulated) |
73 | Pole Clamps with with I-Hook & nut & bolts for laying ABC |
74 | D-Straps |
75 | Insulation mastic tape (2inc X 10 feet). |
76 | Single Phase Distribution Box with clamps (Deep Drawn Type) - 1 Incoming and 8 outgoing |
77 | Three Phase Distribution Box with clamps (Deep Drawn Type) 1 Incoming and 4 outgoing |
78 | Aluminium paint |
79 | Red Oxide Paint |
80 | Smart TVM Meter Compatible with System (AMI) complete Set |
81 | HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc |
82 | Crimping type heavy duty aluminium lugs suitable for connection PVC cables |
83 | Armour rod with ferrules for ACSR Rabbit/Weasel Helical Performed |
84 | Cable Route Marker |
85 | PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral) |
86 | PG Clamp for Rabbit |
87 | GI Stay Wire 7/10 SWG |
88 | GI Stay Wire 7/8 SWG |
89 | HT Guy Insulator |
90 | LT Guy Insulator |
91 | 33 KV Stay Complete (GI Stay Rod 20x1800 mm,Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
92 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
93 | Turn Buckle |
94 | HT Stay Clamp as per approved drawing-33 KV |
95 | HT Stay Clamp as per approved drawing-11 KV |
96 | LT Stay Clamp as per approved drawing |
97 | 11 KV Cross arm holding clamps with bolts & nuts |
98 | 11 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm ) |
99 | 33 KV Cross arm holding clamps with bolts & nuts |
100 | 33 KV Steel X-arm V type (GI Channel 100 X 50 X 6 mm ) |
101 | Angle for vertical ArmL50x50x6 (Type -A)-900MM |
102 | Angle for vertical ArmL50x50x6 (Type -B)- 900MM |
103 | Top Clamp for Vertical arm L 50X6 (Type -A)- 435 mm |
104 | Top Clamp for Vertical arm L 50X6 (Type -B)- 435 mm |
105 | Bottom Clamp for Vertical arm L 50X6 (Type -A)- 507 mm |
106 | Bottom Clamp for Vertical arm L 50X6 (Type -B)- 507 mm |
107 | Clamp FOR Top Channel with Nut bolt |
108 | Clamps for LT T-off with bolts & nuts |
109 | E- Bracket for 11 KV line |
110 | Eye Bolt |
111 | F- Bracket for 11 KV line |
112 | F- Bracket for 33 KV line |
113 | Guarding angle 65x55x6 mm, 1.6 mtr. With Clamp |
114 | Holding clamps for Top channel, GI Channel & GI Angle with bolts & nuts |
115 | M.S. Top channel 100x50x6 mm., 2240 mmlong |
116 | GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps |
117 | GI Channel 100x50x6 mm 2028 mm long (For Fuse Set ) |
118 | M.S. Top channel 125x65x6 mm., 2240 mmlong |
119 | Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt |
120 | Clamps for Dist. Box (40x6 mm) |
121 | Clamps for T/F (75x8 mm GI flat). |
122 | GI. guarding Angle 75x75x6 mm 3010 mm long with Clamp |
123 | Height raising channel 100x50,2240 mm long |
124 | Back clamp for Height raising channel holding clamps with bolts & nuts |
125 | GI Channel 100x50x6 mm. 1300 mm long |
126 | GI Channel clamp with nuts & bolts |
127 | GI Angle Iron 50x50x6 mm bracing with 4 clamps |
128 | GI Channel 125x65 mm |
129 | GIangle 75x75x6x2028 mm with clamp &bolt and nut (T/F base) |
130 | GI Channel 75x75x6 mm &bolt and nut (T/F base Support) |
131 | 11 KV, 1250 A Outgoing VCB Indoor type with CTR 200/100/5 - 5A 350 MVA (Compatible with existing VCB at 33/11 KV substation) |
132 | Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable |
133 | Cable jointing kit straight through (3x185) |
134 | Extra Prefabricated Items Like Clamp , Channel, Angle with Nut bolt |
135 | ERECTION PART |
136 | Conversion of existing Service Cable to New Armoured Service cable with all required accessories like J-pipe , shaddle , Conduit Pipe ,clamp ,GI wire , Reel insulator , Earthing bolt and lugs etc.(Complete Work in all respect) and Removing and shifting of Existing Material to client store |
137 | Armoured Service Cable 2CX4 SQMM For Single phase consumer |
138 | Armoured Service Cable 2CX6 SQMM For Single phase consumer |
139 | Armoured Service Cable 4CX10 SQMM For Three phase consumer |
140 | Armoured Service Cable 4CX16 SQMM For Three phase consumer |
141 | Erection, Testingand commissioning of Replacement ofLT Bare Conductor with AB Cables (Complete Work in all respect) |
142 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
143 | 9 Meter long STP as per Approved Drawing and Technical specification (SP-33) |
144 | Stone Pad (300x300x75mm) |
145 | LT ABC 3x120+1x95+1x16 sq.mm. (Bare Massenger Wire) |
146 | LT ABC 3x95+1x70+1x16 sq.mm. (Bare Massenger Wire) |
147 | LT ABC 3x50+1x35+1x16 sq.mm. (Bare Massenger Wire) |
148 | Pole Clamps with with I-Hook & nut & bolts for laying ABC |
149 | Dead End clamp (Insulated) |
150 | Suspension clamps (Insulated) |
151 | Insulating Piercing Connector (16-150 sq.mm) |
152 | PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral) |
153 | 1x25 mm2 PVC insulated Al. LT Cable for energising the distribution boxes. |
154 | Single Phase Distribution Box with clamps (Deep Drawn Type) - 1 Incoming and 8 outgoing |
155 | Three Phase Distribution Box with clamps (Deep Drawn Type) 1 Incoming and 4 outgoing |
156 | Earthing Coil connected with nutbolt using Charchol and Salt |
157 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
158 | LT Guy Insulator |
159 | GI Stay Wire 7/10 SWG |
160 | LT Stay Clamp as per approved drawing |
161 | Removing and shifting of Existing Material to client store |
162 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
163 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.39 Cmt (9 Meter - STP ) as per approved Drawing |
164 | Erection, Testingand commissioning of Replacement ofAB Cable (Damage)with AB Cables (Complete Work in all respect) |
165 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
166 | 9 Meter long STP as per Approved Drawing and Technical specification (SP-33) |
167 | Stone Pad (300x300x75mm) |
168 | LT ABC 3x120+1x95+1x16 sq.mm. (Bare Massenger Wire) |
169 | LT ABC 3x95+1x70+1x16 sq.mm. (Bare Massenger Wire) |
170 | Pole Clamps with with I-Hook & nut & bolts for laying ABC |
171 | Dead End clamp (Insulated) |
172 | Suspension clamps (Insulated) |
173 | Insulating Piercing Connector (16-150 sq.mm) |
174 | PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral) |
175 | 1x25 mm2 PVC insulated Al. LT Cable for energising the distribution boxes. |
176 | Single Phase Distribution Box with clamps (Deep Drawn Type) - 1 Incoming and 8 outgoing |
177 | Three Phase Distribution Box with clamps (Deep Drawn Type) 1 Incoming and 4 outgoing |
178 | Earthing Coil connected with nutbolt using Charchol and Salt |
179 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
180 | LT Guy Insulator |
181 | GI Stay Wire 7/10 SWG |
182 | LT Stay Clamp as per approved drawing |
183 | Removing and shifting of Existing Material to client store |
184 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
185 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.39 Cmt (9 Meter - STP ) as per approved Drawing |
186 | Erection, Testingand commissioning of Replacement of LT Line with XLPE Armoured Cables (Complete Work in all respect) |
187 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
188 | 9 Meter long STP as per Approved Drawing and Technical specification (SP-33) |
189 | Stone Pad (300x300x75mm) |
190 | Angle for vertical ArmL50x50x6 (Type -A)-900MM |
191 | Top Clamp for Vertical arm L 50X6 (Type -A)- 435 mm |
192 | Bottom Clamp for Vertical arm L 50X6 (Type -A)- 507 mm |
193 | Angle for vertical ArmL50x50x6 (Type -B)- 900MM |
194 | Top Clamp for Vertical arm L 50X6 (Type -B)- 435 mm |
195 | Bottom Clamp for Vertical arm L 50X6 (Type -B)- 507 mm |
196 | LT Shackle Insulator |
197 | D-Straps |
198 | 1 core (Al.) 120mm2 LT Armoured XLPE Cable |
199 | 1 core (Al.) 95mm2 LT Armoured XLPE Cable |
200 | 1 core (Al.) 50mm2 LT Armoured XLPE Cable |
201 | 1 core (Al.) 25mm2 LT Armoured XLPE Cable |
202 | Mid Span Joint 120mm2 |
203 | Insulating Piercing Connector (50-150 sq.mm) |
204 | Insulation mastic tape (2inc X 10 feet). |
205 | Single Phase Distribution Box with clamps (Deep Drawn Type) - 1 Incoming and 8 outgoing |
206 | Three Phase Distribution Box with clamps (Deep Drawn Type) 1 Incoming and 4 outgoing |
207 | 1x25 mm2 Armoured XLPE insulated Al. LT Cable for energising the distribution boxes. |
208 | Earthing Coil connected with nutbolt using Charchol and Salt |
209 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
210 | LT Guy Insulator |
211 | GI Stay Wire 7/10 SWG |
212 | LT Stay Clamp as per approved drawing |
213 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
214 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.39 Cmt (9 Meter - STP ) as per approved Drawing |
215 | Removing and shifting of Existing Material to client store |
216 | Survey , Erection, Testingand commissioning of 11 Kv Line (Feeder Spliting Due to over loading) on 8.5 Mtr PCC pole-115.6 CKM and 11 Mtr STP Pole -151.4 CKM (Complete Work in all respect) |
217 | Route survey and pole spotting for 11 KV line |
218 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
219 | 11 Meter long STP as per Approved Drawing and Technical specification (SP-55) |
220 | ACSR Rabbit Conductor |
221 | Stone Pad (300x300x75mm) |
222 | 11 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm ) |
223 | 11 KV Cross arm holding clamps with bolts & nuts |
224 | F- Bracket for 11 KV line |
225 | M.S. Top channel 100x50x6 mm., 2240 mmlong |
226 | Clamp FOR Top Channel with Nut bolt |
227 | GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps |
228 | E- Bracket for 11 KV line |
229 | 11 KV Pin Insulator Polymer Type as per TS |
230 | 11 KV Disc. Insulators B&S type 45 KN (Polymer Type) |
231 | 11 KV Disc Fitting B & S type (45 KN) |
232 | PG Clamp for Rabbit |
233 | Aluminium binding wire - 6 SWG |
234 | Jointing sleave |
235 | 11 KV Danger Board with Clamp and Nuts & Bolts |
236 | G.I. Barbed Wire |
237 | Aluminium paint |
238 | Red Oxide Paint |
239 | Earthing Coil connected with nutbolt using Charchol and Salt |
240 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
241 | HT Guy Insulator |
242 | GI Stay Wire 7/10 SWG |
243 | HT Stay Clamp as per approved drawing-11 KV |
244 | 11 KV Number Plate with Clamp and Nuts & Bolts |
245 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
246 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing |
247 | Erection, Testingand commissioning of 11 KV VCB with complete Assoceries as apporoved Drawing and Tecchanical Specifiactions (Complete Work in all respect) |
248 | 11 KV, 1250 A Outgoing VCB Indoor type with CTR 200/100/5 - 5A 350 MVA (Compatible with existing VCB at 33/11 KV substation) |
249 | 11 kVXLPE Cable 3x185 Sq. mm. (Armoured) |
250 | Smart TVM Meter Compatible with System (AMI) complete Set |
251 | Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
252 | GI Flat 50X6 for Earthing |
253 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
254 | Stone Pad (300x300x75mm) |
255 | M.S. Top channel 100x50x6 mm., 2240 mmlong |
256 | Clamp FOR Top Channel with Nut bolt |
257 | GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps |
258 | 11 KV Disc. Insulators B&S type 45 KN (Polymer Type) |
259 | 11 KV Disc Fitting B & S type (45 KN) |
260 | PG Clamp for Rabbit |
261 | 11 KV Danger Board with Clamp and Nuts & Bolts |
262 | G.I. Barbed Wire |
263 | Earthing Coil connected with nutbolt using Charchol and Salt |
264 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
265 | HT Guy Insulator |
266 | GI Stay Wire 7/10 SWG |
267 | HT Stay Clamp as per approved drawing-11 KV |
268 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
269 | Survey , Erection, Testingand commissioning of 11 Kv Line (Feeder Sagrigation) (Complete Work in all respect) |
270 | Route survey and pole spotting for 11 KV line |
271 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
272 | ACSR Rabbit Conductor |
273 | Stone Pad (300x300x75mm) |
274 | 11 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm ) |
275 | 11 KV Cross arm holding clamps with bolts & nuts |
276 | F- Bracket for 11 KV line |
277 | M.S. Top channel 100x50x6 mm., 2240 mmlong |
278 | Clamp FOR Top Channel with Nut bolt |
279 | GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps |
280 | E- Bracket for 11 KV line |
281 | 11 KV Pin Insulator Polymer Type as per TS |
282 | 11 KV Disc. Insulators B&S type 45 KN (Polymer Type) |
283 | 11 KV Disc Fitting B & S type (45 KN) |
284 | PG Clamp for Rabbit |
285 | Aluminium binding wire - 6 SWG |
286 | Jointing sleave |
287 | 11 KV Danger Board with Clamp and Nuts & Bolts |
288 | G.I. Barbed Wire |
289 | Earthing Coil connected with nutbolt using Charchol and Salt |
290 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
291 | HT Guy Insulator |
292 | GI Stay Wire 7/10 SWG |
293 | HT Stay Clamp as per approved drawing-11 KV |
294 | 11 KV Number Plate with Clamp and Nuts & Bolts |
295 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
296 | Erection, Testingand commissioning of 11 KV VCB with complete Assoceries as apporoved Drawing and Tecchanical Specifiactions(Feeder Segrigation) (Complete Work in all respect) |
297 | 11 KV, 1250 A Outgoing VCB Indoor type with CTR 200/100/5 - 5A 350 MVA (Compatible with existing VCB at 33/11 KV substation) |
298 | 11 kVXLPE Cable 3x185 Sq. mm. (Armoured) |
299 | Smart TVM Meter Compatible with System (AMI) complete Set |
300 | Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
301 | GI Flat 50X6 for Earthing |
302 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
303 | Stone Pad (300x300x75mm) |
304 | M.S. Top channel 100x50x6 mm., 2240 mmlong |
305 | Clamp FOR Top Channel with Nut bolt |
306 | GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps |
307 | 11 KV Disc. Insulators B&S type 45 KN (Polymer Type) |
308 | 11 KV Disc Fitting B & S type (45 KN) |
309 | PG Clamp for Rabbit |
310 | 11 KV Danger Board with Clamp and Nuts & Bolts |
311 | G.I. Barbed Wire |
312 | Earthing Coil connected with nutbolt using Charchol and Salt |
313 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
314 | HT Guy Insulator |
315 | GI Stay Wire 7/10 SWG |
316 | HT Stay Clamp as per approved drawing-11 KV |
317 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
318 | Erection, Testingand commissioning of 11 KV NH Crossing (Complete Work in all respect) |
319 | 11 kVXLPE Cable 3x185 Sq. mm. (Armoured) |
320 | Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable |
321 | HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc |
322 | GI Pipe 6" Diameter with clamps |
323 | 11 Meter long STP as per Approved Drawing and Technical specification (SP-55) |
324 | GI Angle Iron 50x50x6 mm bracing with 4 clamps |
325 | M.S. Top channel 100x50x6 mm., 2240 mmlong |
326 | Clamp FOR Top Channel with Nut bolt |
327 | G.I. Barbed Wire |
328 | Stone Pad (300x300x75mm) |
329 | 11 KV Pin Insulator Polymer Type as per TS |
330 | 11 KV Disc. Insulators B&S type 45 KN (Polymer Type) |
331 | 11 KV Disc Fitting B & S type (45 KN) |
332 | PG Clamp for Rabbit |
333 | E- Bracket for 11 KV line |
334 | 11 KV Danger Board with Clamp and Nuts & Bolts |
335 | Aluminium paint |
336 | Red Oxide Paint |
337 | Earthing Coil connected with nutbolt using Charchol and Salt |
338 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
339 | HT Guy Insulator |
340 | GI Stay Wire 7/10 SWG |
341 | HT Stay Clamp as per approved drawing-11 KV |
342 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing |
343 | Cable laying including cost of material eg. , Bricks, Sand, clamps etc. |
344 | Erection, Testingand commissioning of 11 KV Railway Crossing (Complete Work in all respect) |
345 | 11 kVXLPE Cable 3x185 Sq. mm. (Armoured) |
346 | Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable |
347 | HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc |
348 | GI Pipe 6" Diameter with clamps |
349 | 11 Meter long STP as per Approved Drawing and Technical specification (SP-55) |
350 | GI Angle Iron 50x50x6 mm bracing with 4 clamps |
351 | M.S. Top channel 100x50x6 mm., 2240 mmlong |
352 | Clamp FOR Top Channel with Nut bolt |
353 | G.I. Barbed Wire |
354 | Stone Pad (300x300x75mm) |
355 | 11 KV Pin Insulator Polymer Type as per TS |
356 | 11 KV Disc. Insulators B&S type 45 KN (Polymer Type) |
357 | 11 KV Disc Fitting B & S type (45 KN) |
358 | PG Clamp for Rabbit |
359 | E- Bracket for 11 KV line |
360 | 11 KV Danger Board with Clamp and Nuts & Bolts |
361 | Aluminium paint |
362 | Red Oxide Paint |
363 | Earthing Coil connected with nutbolt using Charchol and Salt |
364 | 9 KV LA , 10 KA (Station Class) |
365 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
366 | HT Guy Insulator |
367 | GI Stay Wire 7/10 SWG |
368 | HT Stay Clamp as per approved drawing-11 KV |
369 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing |
370 | Cable laying including cost of material eg. , Bricks, Sand, clamps etc. |
371 | Erection, Testingand commissioning of 11 kV Line crossing by 33kV Lines on STP 13 Mtr with Cradle Guarding (Complete Work in all respect) |
372 | 13 Meter long STP as per Approved Drawing and Technical specification (SP-72) |
373 | 33 KV Steel X-arm V type (GI Channel 100 X 50 X 6 mm ) |
374 | 33 KV Cross arm holding clamps with bolts & nuts |
375 | 33 KV Pin Insulator |
376 | 33 KV G.I. Pin (10 KN) with nuts & washers |
377 | GI. guarding Angle 75x75x6 mm 3010 mm long with Clamp |
378 | F- Bracket for 33 KV line |
379 | Turn buckle |
380 | G.I. Wire 6 SWG |
381 | G.I. Wire 8 SWG |
382 | G.I. Wire No. 16 SWG for binding |
383 | Eye Bolt |
384 | Armour rod with ferrules for ACSR Rabbit/Weasel Helical Performed |
385 | Stone Pad (300x300x75mm) |
386 | 11 KV Danger Board with Clamp and Nuts & Bolts |
387 | 11 KV Number Plate with Clamp and Nuts & Bolts |
388 | G.I. Barbed Wire |
389 | Red Oxide Paint |
390 | Aluminium paint |
391 | Aluminium binding wire - 6 SWG |
392 | Earthing Coil connected with nutbolt using Charchol and Salt |
393 | Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
394 | 33 KV Stay Complete (GI Stay Rod 20x1800 mm,Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
395 | HT Guy Insulator |
396 | GI Stay Wire 7/8 SWG |
397 | HT Stay Clamp as per approved drawing-33 KV |
398 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.64 Cmt (13 Meter - STP ) as per approved Drawing |
399 | Erection, Testingand commissioning of LT Line crossing by 11 kV Lines on STP 11 Mtr with Cradle Guarding (Complete Work in all respect) |
400 | 11 Meter long STP as per Approved Drawing and Technical specification (SP-55) |
401 | 11 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm ) |
402 | 11 KV Cross arm holding clamps with bolts & nuts |
403 | 11 KV Pin Insulator Polymer Type as per TS |
404 | F- Bracket for 11 KV line |
405 | Guarding angle 65x55x6 mm, 1.6 mtr. With Clamp |
406 | Turn buckle |
407 | G.I. Wire 6 SWG |
408 | G.I. Wire 8 SWG |
409 | G.I. Wire No. 16 SWG for binding |
410 | Eye Bolt |
411 | Armour rod with ferrules for ACSR Rabbit/Weasel Helical Performed |
412 | Stone Pad (300x300x75mm) |
413 | 11 KV Danger Board with Clamp and Nuts & Bolts |
414 | 11 KV Number Plate with Clamp and Nuts & Bolts |
415 | G.I. Barbed Wire |
416 | Red Oxide Paint |
417 | Aluminium paint |
418 | Aluminium binding wire - 6 SWG |
419 | Earthing Coil connected with nutbolt using Charchol and Salt |
420 | Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
421 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
422 | HT Guy Insulator |
423 | GI Stay Wire 7/8 SWG |
424 | HT Stay Clamp as per approved drawing-11 KV |
425 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing |
426 | Erection, Testingand commissioning of UG Cable 11 KV Line (Complete Work in all respect) |
427 | 11 kVXLPE Cable 3x185 Sq. mm. (Armoured) |
428 | Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable |
429 | Cable jointing kit straight through (3x185) |
430 | GI Pipe 6" Diameter with clamps |
431 | Cable Route Marker |
432 | HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc |
433 | 11 Meter long STP as per Approved Drawing and Technical specification (SP-55) |
434 | GI Angle Iron 50x50x6 mm bracing with 4 clamps |
435 | M.S. Top channel 100x50x6 mm., 2240 mmlong |
436 | Clamp FOR Top Channel with Nut bolt |
437 | G.I. Barbed Wire |
438 | Stone Pad (300x300x75mm) |
439 | 11 KV Pin Insulator Polymer Type as per TS |
440 | 11 KV Disc. Insulators B&S type 45 KN (Polymer Type) |
441 | 11 KV Disc Fitting B & S type (45 KN) |
442 | PG Clamp for Rabbit |
443 | E- Bracket for 11 KV line |
444 | 11 KV Danger Board with Clamp and Nuts & Bolts |
445 | Aluminium paint |
446 | Red Oxide Paint |
447 | Earthing Coil connected with nutbolt using Charchol and Salt |
448 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
449 | HT Guy Insulator |
450 | GI Stay Wire 7/10 SWG |
451 | HT Stay Clamp as per approved drawing-11 KV |
452 | Road Restoration Chages forRoad Crossing |
453 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing |
454 | Erection, Testingand commissioningof 11/0.433 KV three phase Transformer sub-station -25 KVA ,63 KVA and 100 KVA (Complete Work in all respect) |
455 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
456 | GI Channel 100x50x6 mm 2028 mm long (For Fuse Set ) |
457 | Stone Pad (300x300x75mm) |
458 | Clamps for LT T-off with bolts & nuts |
459 | Holding clamps for Top channel, GI Channel & GI Angle with bolts & nuts |
460 | GIangle 75x75x6x2028 mm with clamp &bolt and nut (T/F base) |
461 | M.S. Top channel 125x65x6 mm., 2240 mmlong |
462 | 11 KV Disc. Insulators B&S type 45 KN (Polymer Type) |
463 | 11 KV Disc Fitting B & S type (45 KN) |
464 | Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt |
465 | 11 KV Pin Insulator Polymer Type as per TS |
466 | 25 KVA , 11/0.433 KV T/F (BEE Standard 3 Star Rating Self Protected Aluminium Wound Type) |
467 | 63 KVA , 11/0.433 KV T/F (BEE Standard 3 Star Rating Self Protected Aluminium Wound Type) |
468 | 100 KVA , 11/0.433 KV T/F (BEE Standard 3 Star Rating Self Protected Aluminium Wound Type) |
469 | 11KV TPMO with fixing clamps |
470 | 11KV Fuse Set (Drop out) with clamps |
471 | 9 KV LA , 5 KA (Distribution Class) |
472 | LT incoming Panel with AMI metering (Smart Meter compitable with System) equipment & fixing arrangement (As per TS ). (Deep Drawn Type) for 25KVA |
473 | LT incoming Panel with AMI metering (Smart Meter compitable with System) equipment & fixing arrangement (As per TS ). (Deep Drawn Type) for 63 KVA |
474 | LT incoming Panel with AMI metering (Smart Meter compitable with System) equipment & fixing arrangement (As per TS ). (Deep Drawn Type) for 100KVA |
475 | LT PVC cable 4x16 Sq mm |
476 | LT PVC cable 3.5x70 Sq mm |
477 | LT PVC cable 3.5x150 Sq mm |
478 | 11 KV Danger Board with Clamp and Nuts & Bolts |
479 | G.I. Barbed Wire |
480 | ACSR Rabbit Conductor- Jumpering Works |
481 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
482 | HT Guy Insulator |
483 | GI Stay Wire 7/10 SWG |
484 | HT Stay Clamp as per approved drawing-11 KV |
485 | Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
486 | GI Flat 25X3 for Earthing |
487 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
488 | Erection, Testingand commissioningof 11/0.433 KV three phase Transformer sub-station -10 KVA and 16 KVA (Complete Work in all respect) |
489 | 10 KVA, 11KV/250 V, 1 Ph Transformer as BEE standard (Self protected). |
490 | 16 KVA, 11KV/250 V, 1 Ph Transformer as BEE standard (Self protected). |
491 | LT Distribution Box withMCCB for protection of 10 KVA T/F and Bus Bar foroutgoing consumer connections and suitable to house Energy meter (without Energy meter) (Deep drawn Type) as per TS. |
492 | LT Distribution Box withMCCB for protection of 16 KVA T/F and Bus Bar foroutgoing consumer connections and suitable to house Energy meter (without Energy meter) (Deep drawn Type) as per TS. |
493 | Clamps for Dist. Box (40x6 mm) |
494 | Clamps for T/F (75x8 mm GI flat). |
495 | ACSR Weasel Conductor-Jumpering Works |
496 | 11 KV Pin Insulator Polymer Type as per TS |
497 | Eye Bolt |
498 | L.T. PVC cable 10 Sq. mm Single Core |
499 | Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
500 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
501 | HT Guy Insulator |
502 | GI Stay Wire 7/10 SWG |
503 | HT Stay Clamp as per approved drawing-11 KV |
504 | Relocation ,Testing and commissioningof 250 KVA ,11/0.433 KV three phase Transformer sub-station(Complete Work in all respect) |
505 | 11 Meter long STP as per Approved Drawing and Technical specification (SP-55) |
506 | GI Channel 100x50x6 mm 2028 mm long (For Fuse Set ) |
507 | Stone Pad (300x300x75mm) |
508 | Holding clamps for Top channel, GI Channel & GI Angle with bolts & nuts |
509 | M.S. Top channel 125x65x6 mm., 2240 mmlong |
510 | GIangle 75x75x6x2028 mm with clamp &bolt and nut (T/F base) |
511 | GI Channel 75x75x6 mm &bolt and nut (T/F base Support) |
512 | 11 KV Disc. Insulators B&S type 45 KN (Polymer Type) |
513 | 11 KV Disc Fitting B & S type (45 KN) |
514 | Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt |
515 | Clamps for LT T-off with bolts & nuts |
516 | 11 KV Pin Insulator Polymer Type as per TS |
517 | 11KV TPMO with fixing clamps |
518 | 11KV Fuse Set (Drop out) with clamps |
519 | LT incoming Panel with AMI metering (Smart Meter compitable with System) equipment & fixing arrangement (As per TS). (Deep Drawn Type) for 250KVA |
520 | Copper L-Piece 50x225x10mm |
521 | Copper L-Piece 50x225x12mm |
522 | LT PVC cable 3.5x400 Sq mm |
523 | Al Leg long barrel off size |
524 | 4 core LT MCB with box |
525 | 11 KV Danger Board with Clamp and Nuts & Bolts |
526 | G.I. Barbed Wire |
527 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
528 | HT Guy Insulator |
529 | GI Stay Wire 7/10 SWG |
530 | HT Stay Clamp as per approved drawing-11 KV |
531 | Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
532 | GI Flat 50X6 for Earthing |
533 | GI Channel 125x65 mm |
534 | 9 KV LA , 5 KA (Distribution Class) |
535 | Crimping type heavy duty aluminium lugs suitable for connection PVC cables |
536 | PG Clamp for Rabbit |
537 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing |
538 | DT"s Plinth Foundation |
539 | Dismentaling of Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,comissioning and charging and other shifting to store. |
540 | Erection, Testingand commissioning of New LT Line With AB Cable(Complete Work in all respect) |
541 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
542 | Stone Pad (300x300x75mm) |
543 | LT ABC 3x50+1x35+1x16 sq.mm. (Bare Massenger Wire) |
544 | LT ABC 3x95+1x70+1x16 sq.mm. (Bare Massenger Wire) |
545 | Pole Clamps with with I-Hook & nut & bolts for laying ABC |
546 | Dead End clamp (Insulated) |
547 | Suspension clamps (Insulated) |
548 | PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral) |
549 | Insulating Piercing Connector (16-150 sq.mm) |
550 | 1x25 mm2 PVC insulated Al. LT Cable for energising the distribution boxes. |
551 | Single Phase Distribution Box with clamps (Deep Drawn Type) - 1 Incoming and 8 outgoing |
552 | Three Phase Distribution Box with clamps (Deep Drawn Type) 1 Incoming and 4 outgoing |
553 | Earthing Coil connected with nutbolt using Charchol and Salt |
554 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
555 | LT Guy Insulator |
556 | GI Stay Wire 7/10 SWG |
557 | LT Stay Clamp as per approved drawing |
558 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
559 | Erection, Testingand commissioning of 11KV Line Guarding (Complete Work in all respect) |
560 | Guarding angle 65x55x6 mm, 1.6 mtr. With Clamp |
561 | Height raising channel 100x50,2240 mm long |
562 | Back clamp for Height raising channel holding clamps with bolts & nuts |
563 | G.I. Wire 6 SWG |
564 | G.I. Wire 8 SWG |
565 | Turn Buckle |
566 | Eye Bolt |
567 | G.I. Wire No. 16 SWG for binding |
568 | Earthing Coil connected with nutbolt using Charchol and Salt |
569 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
570 | HT Guy Insulator |
571 | GI Stay Wire 7/10 SWG |
572 | HT Stay Clamp as per approved drawing-11 KV |
573 | Erection, Testingand commissioning of Tee Of Channel (Complete Work in all respect) |
574 | GI Channel 100x50x6 mm. 1300 mm long |
575 | GI Channel clamp with nuts & bolts |
576 | 11 KV Disc. Insulators B&S type 45 KN (Polymer Type) |
577 | 11 KV Disc Fitting B & S type (45 KN) |
578 | 11 KV Pin Insulator Polymer Type as per TS |
579 | PG Clamp for Rabbit |
580 | Stay Complete (GI Stay Rod 16x1800 mm, Eye Bolt, Anchor plate,Turn Buckle and thimble) Bolt, Nuts Bolt & Washers |
581 | HT Guy Insulator |
582 | GI Stay Wire 7/10 SWG |
583 | HT Stay Clamp as per approved drawing-11 KV |
584 | Control Room Building Extention work (Complete Work in all respect) |
585 | RCC Work of Building with Internal wiring works for Extension of Control room Building (36 Sqmm) (Complete Works in all respect) as per approved drawing and specification |
586 | Water pump, Toilet works as per approved drawing and specification |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail