Military Engineer Services-MES has published Provision Of Aluminium Partition, Door And Plumbing Work At Mh Shimla Under Ge Jutogh. Submission Date for this Tender is 17-05-2022. Plumbing and Sanitary Work Tenders in Shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | S&F aluminum anodized frame for doors, windows, partion, powder coated (minimum thickness of powder coating 50 micron) with one or more rebates including PVC protector sheeting and jointing cleat for fixing etc. complete all as specified and directed. |
| 2 | S&F aluminium section weighing not less than 1.20 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as hinges type B-21, 100mm long (03 Nos), 100mm aluminium handle (02 Nos), 100mm aluminium tower bolt (02 Nos) and 250mm long aluminium aldrop (01 No) in one shutter complete all as specified and directed. Note: Glass and board shall be measured and paid separately. |
| 3 | S&F aluminum anodized two track sliding doorshutters, powder coated of any colour (thickness of powder coating not less than 50 micron)aluminum section weighing not less than 1.20 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as roller as required, 250mm long aluminium aldrop (01 No), 100 mm aluminium handle (02 Nos) and 100 mm aluminium tower bolt (02 Nos) in one shutter complete all as specified and directed. Note: Glass and board shall be measured and paid separately. |
| 4 | S&F 5.5 mm thick tinted sheet glass fixed to aluminium frame work using anodized aluminium powder coated bead, including rubber beading and packing, in panels exc 0.5 sqm in each pane complete all as specified and directed. |
| 5 | S&F5-6 mm thick Aluminium composite panel sheet fixed to aluminium frame work using anodized aluminium powder coated bead including rubber beading and packing in panels exc 0.5 sqm in each pane complete all as specified and directed. |
| 6 | Taking down chowkhats or frames with shutters without taking off shutters from the frames, area exc 1.5sqm n. exc. 4 Sqm each and removing from the site including cutting holes for taking out hold fasts and making good dismantled portion in CM 1:3 or in PCC 1:2:4, typeB-1, and finish the surface as per existing finishes after inserting new hold fast/chowkats, complete all as specified and directed. |
| 7 | S&F toughned froasted glass 12mm thick as in frameless hinged glass door, automatic/ manually operated door and similar work including cutting shape drilling hole as required and engraving name of office/ room with logo as specified on each shutter of area n. exc. 2.50 Sqm with complete stainless steel fitting like handles, including locking arrangement, pintle hinge and floor door spring etc complete all as specified and directed. |
| 8 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/ dense soil complete all as specified and directed. |
| 9 | M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in foundarion to embedding the fencing post / struts complete all as specified and directed. |
| 10 | S & F rolled mild steel work as in roof trusses (framed), trussed, purlins,pillars, crane gantries, rails and fasteningsand heavy bracket framing (tublar sections) incl distance pieces, cleats etc confirming toFe-290 Gde E-165 complete all as specified and directed. |
| 11 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 12 | M&L for prepration of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 13 | M&L for RCC 1:2:4, type B-1, using 20 mm gradedcrushed stone aggregates, as in column, chajja, parapet wall, shelves etc including necessary form work complete all as specified and directed. |
| 14 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 15 | M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in CM 1:6, using old size bricks, complete all as specified and directed. |
| 16 | M&L for rendering 15 mm thick onbrick work or concrete surfaces in CM 1:6finished even and smooth, without using extra cement, complete all as specified and directed. |
| 17 | M&L for glazed ceramic coloured tiles, 6-7 mm thick of size350x250/ 450mm x 350mm, in vertical surface as skirting dado, set and jointed in neat cement slurry, over and including 10 mm thick rendering of CM 1:4, including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. |
| 18 | M&L for 15-20 mm thick granite (of any type) work (table rubbed and polished), inwindow cills, steps, cooking plateform, shelves, counter slabsand the like, laid over and including 15mm thick screed bed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 19 | S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions and chase cutting for laying pipe as required, complete all as specified and directed. |
| 20 | S & F 15 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions and chase cutting for laying pipe as required, complete all as specified and directed. |
| 21 | S&Fbib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule, complete all as specified and directed. |
| 22 | S&Fbrass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore iron pipe or for brass ferrule, complete all as specified and directed. |
| 23 | S&F waste coupling of PTMT 32 mm (half or full threaded) (minimum weight 32mm-45gms, complete all as specified and directed |
| 24 | S&F stainless steel sink with draining board made out of 1mm thick sheet kitchen or laboratory with plugs, washers including beding lime cement mortar to dwarf wall or including fixing cantilever brackets fixed to walland connecting union to pipe overall size 914x460x203mm bowl size 405x354x203 mm complete all as specified and directed. |
| 25 | S&F 75 mm bore PVC (SWR) rain water pipes single socketed in any length with and including PVC bends where necessary, rubber ring joints, fixed to walls with and including MS clamps and making good the disturbed surface of wall with CM 1:4, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
