Military Engineer Services-MES has published Provision Of Dry Ration Store, Provision Of Garbage Pit Near Orl And Standby Water Supply From Existing Semi Ug Sump At Pump House And Provision Of Attached Toilet To Bldg No. T-273 At Rhenock Under Ge 867 Ews. Submission Date for this Tender is 21-05-2022. Toilet Bathroom Tenders in rhenock Sikkim. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-May-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-05-2022 |
| Sl. No. | Item Description |
| 1 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, laying of pipe, cable etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exceeding 10 sqm on plan and getting out in soft/loose soil all as specified and directed by Engineer-in-charge. |
| 2 | M&L forPlain cement concrete 1:4:8 mix type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-charge. |
| 4 | Removing surplus excavated soil to a distance not exceeing 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge. |
| 5 | Use and removal of steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete flat all as specified and directed by Engineer-in-Charge. |
| 6 | Use and removal of steel formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete all as specified and directed by Engineer-in-Charge. |
| 7 | Use and removal of steel formwork to sides and soffits of floor or roof beams, bands, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, shelves etc., for rough finished surfaces of concrete flat all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams etc., all as specifiedand directed by Engineer-in-Charge. Note: Formwork and reinforcement shall be measured and paid seperately. |
| 9 | M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc., all as specifiedand directed by Engineer-in-Charge. Note: Formwork and reinforcement shall be measured and paid seperately. |
| 10 | M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels exceeding 1.5 m span, bands etc., all as specifiedand directed by Engineer-in-Charge. Note: Formwork and reinforcement shall be measured and paid seperately. |
| 11 | M&L for Mild steel deformed TMT bars 10mm dia and above as in reinforcement to concrete cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge. |
| 12 | M&L for Mild steel deformed TMT bars 8mm dia as in reinforcement to concrete cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge. |
| 13 | M&Lfor Mild steel deformed TMT bars 5mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified. |
| 14 | M&L for Fe-410W (Grd E-250) structural steel work Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F welding in repairs exceeding 2.5 Cm but not exceeding 5 Cm in legth to structural members of thickness not exceeding 6 mm complete all as directed by Engr-in-charge. |
| 16 | M&L for preparation of new or previously un treated surfaces of steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. Make: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/NEROLAC/IEL |
| 17 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated (Trepezium or tiled pattern etc.,) steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa (pitch of corrugation shall be 200mm to 250mm and crest shall be 28mm to 32mm) as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. Make for Item No. 17&18: TATA BLUESLOPPE/ LLYODS /JMBS/ EVEREST INDUSTRIES LTD/CRIL/JSW STEEL or equivalent as approved by GE. |
| 19 | M&L for Hardcore with Broken stone/boulders of gauge not exceeding 63mm, deposited, spread andlevelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed by Engineer-in-charge. |
| 20 | M&L for 100 mm thick Plain Cement Concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer complete all as specified and directed by Engineer-in-charge. |
| 21 | M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. Make : Shankar Saw Mills/Sangam Prefeb Products or equivalent make as approved by GE. |
| 22 | M&L 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection/path laid in alternative bays finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 23 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 24 | M&L for preparation of new plastered surfaces of wallsand applying two coats of distemper oil emulsion over one coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON |
| 25 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including waterproofing compound @ 3% by weight of cement as per manufacturer"s instructions complete all as specified and directed by Engr-in-charge. |
| 26 | M&L for preparation of new surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and as directed by Engineer-in-Charge. Make: INDOCEM/ SUPERSNOWCEM/ AQUACEM/ DURACEM |
| 27 | S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm dia GI hangers (upto1200mm length) adjusting level and providing 4 mm thick asbestos cement plain building boards, fixed to GI frame work with screws as in ceiling and applying 3 coats of white wash complete all as specified and as directed by Engineer-in-charge. |
| 28 | M&L for Machine cut kota stone slab flooring 20-25mm thick as in floors laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid on and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 29 | M&L for Machine cut kota stone slab flooring 20-25mm thick as in skirting, dado or clading laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid on and including 10mm thickrendering in cement mortar 1:4 complete all as specified and directed by Engr-in-charge. |
| 30 | S&F 165x60 mm size pressed steel door frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC 1:3:6 type C0 filling complete all as directed by Engr-in-Charge. Make: - DIWAN STEELS/AVA STEELS/AJANTA ISPATor equivalent as approved by GE. |
| 31 | S&F 40mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, both faces are covered with decorative face vener with lipping/ frame to match complete all as specified and directed by Engineer-in-Charge. Make: - Green Ply/Archid Ply or equivalent as approved by GE. |
| 32 | S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed. |
| 33 | S&F 150 mm long Aluminium alloy handles cast type anodised all as specified and directed. |
| 34 | S&F 300mmlong aluminium alloy anodised sliding door bolts with hasp & staple (bolt type)and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed. Make for Item No. 32 to 34: - CROWN/ CLASSIC/ JYOTHI/ AMIT/ MOWJEE/ARGENT/Bharat/Alans/Hettich/Everlite or any ISI marked make as approved by GE. |
| 35 | S&F steel window with side hung shutters (glazed or wire mesh shutters) fitted with box type hinges with suitable MS handles, peg stays, with glazing bars complete all as specified and directed by Engr-in-charge. |
| 36 | S&F steel window with side hung shutters (glazed or wire mesh shutters) fitted with box type hinges with suitable MS handles, peg stays, with out glazing bars complete all as specified and directed by Engr-in-charge. Make for Item No. 35 & 36: M/s Madhu industries / M/s.SEN Harvick / M/s. Shiv Mular / M/s. AGEW. / M/s. Multiwyn Industries Corpn/ M/s Ganesh rolling shutters/AVA steels/Ajanta Ispat or equvalent make as approved by GE. |
| 37 | S&F Fe-290 Gde E-165 Rolled mild steel sections as in framed work for grills, gratings, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings& hanging; also fastening & fixing complete all as specified and directed by Engineer-in-charge. |
| 38 | S & F3 mm thickSheet Glass, ordinary quality and glazing with oil putty in steel windows or fitted with wooden beadings in square n. exe 0.5 sqm each pane all as specified and directed. Make: TRIVENI /VALLBH/ATUL/ HINDUSTAN / PILKINGTON / MODIGUARD/SAINTGOBAIN |
| 39 | S & Fgalvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mmand fixed with tinned tacks orgalvanised wire staples or wooden beeds all as specified and directed. |
| 40 | M&L Preparing new or previously un treated surfases of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed. Make: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/NEROLAC/IEL |
| 41 | M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channels, drains including fair finishing inner surface of drain or channel using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and directed. |
| 42 | M&L for surface excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 43 | M&L for plain cement concrete 1:3:6 mix, type C1 (using 20 mm graded stone aggregate) as incoping, kneelers, apex stones, bed plates, water trough and like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specifiedand directed by Engineer-in-Charge. |
| 44 | M&L for preparingnewly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engineer-in-charge. Make: LOVELYCEM/ SURYACEM/ JANATHACEM / LUCKYCEM or equivalent make as approved by GE. |
| 45 | M&L for 75 mm thick Plain Cement Concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer complete all as specified and directed by Engineer-in-charge. |
| 46 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 47 | M&L for coloured glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar 1:4 backing coat complete all as directed by Engineer –in-Charge. Make for Item No 46&47: NITCO/ SOMANY/ ASIAN / JOHNSON/KAJARIA/ORIENT BELL |
| 48 | Demolition of brickwork or stone / boulder masonry, built in cement mortar or cement lime mortarncluding all quoins, arches, pillars, etc.,but excluding ashlar facings, dressed stonework and precast concrete articlesall as specifiedand directed by Engineer-in-Charge. |
| 49 | M&L for Fe-410W (Grd E-250) structural steel work as in main and cross beams ; hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates complete all as specified and directed by Engineer-in-Charge. |
| 50 | S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with "L" or "J" type hook boltsand bitumen washers as in roof coveringetc.,with grade of Zinc coating 275 Grms/Sqm including taking down existing steel sheetng of any type complete all as specified and directed by Engineer-in-Charge. Make: TATA / LLYODS /JMBS/ EVEREST INDUSTRIES LTD/CRIL/JSW STEEL or equivalent make as approved by GE. |
| 51 | M&L preparing new steel and iron surfaces of any description over 10 cm width or girth of CGI sheet in roof etc., and applying two coats of synthetic enamel paint (Corrugal) over one coat of red oxide zinc chrome primer complete all as specified and directed byEngineer-in-Charge. Make: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/NEROLAC/IEL |
| 52 | M&L for false ceiling with light weight PVC hollow section panels made of 1mm thick PVC sheet and overall thickness of panel minimum 7mm and 200mm wide strips fixed in and including GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed by Engineer-in-charge. MAKE: Rajshree plast wood/Sintex/Nandi/Duroplast or equivalent as approved by GE. |
| 53 | S&F factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as per specification and dawings. |
| 54 | S&F Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colourr PVC "C" channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain clour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawing. Make for Item No. 53 & 54: - SINTEX / RAJSHRI PLASTIWOOD/ NANDI/ UNIVERSAL |
| 55 | S&F 75 mm size cold rolled mild steel medium weight butt hingescomplete all as specified and directed. Make: - CROWN/ CLASSIC/ JYOTHI/ AMIT/ MOWJEE/ARGENT/Bharat/Alans/Hettich/Everlite or any ISI marked make as approved by GE. |
| 56 | S&F steel ventilators with top hung shutters (glazed or wire mesh shutters) fitted with box type hinges with suitable MS handles, peg stays complete all as directed by Engr-in-charge. Make: M/s Madhu industries / M/s.SEN Harvick / AVA STEELS /M/s. Shiv Mular / M/s. AGEW. / M/s. Multiwyn Industries Corpn/ M/s Ganesh rolling shutters/Ajanta Ispat or equvalent make as approved by GE. |
| 57 | S & F 3mm thick figured glass pin head type fixed with oil putty and necessary clips/nut bolts area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. Make:- TRIVENI/ SAINT GOBAIN/ MODIGUARD/ATUL/ HINDUSTAN or equivalent as approved by GE. |
| 58 | S&F PVC (SWR) pipes 110mm bore single socket in any length with rubber ring joints laid in trenches or under floors complete all as directed by Engr-in-Charge. |
| 59 | S&F PVC (SWR) bends (any radius) suitable for 110mm bore pipe fitted with access door complete all as directed by Engr-in-charge. |
| 60 | S&F PVC (SWR) pipes 75mm bore single socket in any length with rubber ring joints fixed to wall or laid in floors complete all as directed by Engr-in-Charge. |
| 61 | S&F PVC (SWR) bends (any radius) suitable for 75mm bore pipe fitted with access door complete all as directed by Engr-in-charge. |
| 62 | M&L PVC (SWR) floor trap 75mmplain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F PVC (SWR) vent cowl suitable for 110mm bore pipe complete all as directed by Engr-in-charge. Make for item No 58 to 63: PRINCE/ SUDHAKAR/ NANDI/ FINOLEX/ SWASTIK/SUPRIME |
| 64 | S&F 15mm bore GI water tubing medium grade with all fittings and fixed to wall, floor, ceiling complete including short lengths all as specified and as directed by Engr-in-charge. Make: TATA/JINDAL/ZENITH |
| 65 | S&F 15mm bore GI water tubing medium grade with all fittings complete laid in trenches or on ground, under floors, fixed on wall etc, complete all as specified and as directed by Engineer-in-Charge. Make: TATA/JINDAL/ZENITH NOTE: Excavation and earth work shall be measured and paid separately. |
| 66 | S&F bib taps 15 mm bore, cast copper alloy chromium plated fancy type screwed down high pressure, with crown or capstan head, screwed for iron pipe all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K |
| 67 | S&F Pillar taps fancy type 15 mm bore, cast copper alloy, chromium plated with crown or capstan head screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks & fly-nuts, screwed for iron pipe, all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K |
| 68 | S&F Stop/angle valves 15 mm bore, cast copper alloy chromium plated screwed down high pressure, with crown or capstan head, screwed both ends for iron pipe or for unions all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K |
| 69 | S&F shelf PTMT fixed with and including chromium plated brass screws and wooden/plastic clats (Minimum weight 300 Grms) complete all as directed by Engr-in-Charge. Make:- PRAYAG/POLYTUFF or equivalent as approved by GE. |
| 70 | S&F towel rail 600 mm long PTMT fixed with and including chromium plated brass screws and wooden/plastic clats (Minimum weight 190 Grms) complete all as directed by Engr-in-Charge. Make:- PRAYAG/POLYTUFF or equivalent as approved by GE. |
| 71 | S&F PVC connection pipe 15mm dia, 450mm long with PTMT check nuts and washer on both ends complete all as directed by Engr-in-Charge. Make:- PRAYAG/POLYTUFF or equivalent as approved by GE. |
| 72 | S&F vitreous China Semi-pedestal pattern (Anglo-Indian type) white colour with integral footrest (Excluding flushing cistern and flush pipes) but including cement concrete bedding / fixing bolts complete all as directed by Engineer-in-Charge. Make: HINDWARE / NEYCER/ PARRYWARE / CERA |
| 73 | S&FChromium plated Hand Shower (Health Faucet)8mm dia with 15mm dia pipe with 1 Meter Long Easy Flexible Tube in Chrome Finish & Wall Hook complete all as specified and directed byEngineer-in-Charge. MAKE: JAGUAR Cat No. VOL-17, ALD-565 or equivalent in HINDWARE/ESSCO (DELUX) |
| 74 | S&F PVC valveless, symphonic action type, flushing cistern 10ltr capacity, low level, white with inlet ball valve float and handle along with suitable flush pipe/bend including brackets complete all as directed by Engr-in-Charge. Make: PARRY WARE (SLIMLINE)/ COMMANDER/ HINDWARE |
| 75 | S&F Vitreous China wash basin, white, flat back, of size 550x400 mm, excluding taps, waste chain and plug and porcelain stopper but including brackets and 40mm dia brass chromium plated waste fitting and 40mm dia 90cm long PVC waste pipe, with and including pedastal stand complete all as specified and directed by Engr-in-Charge. Make: HINDWARE / NEYCER/ PARRYWARE / CERA |
| 76 | S&F 600 mm x 450 mm beveled edge mirror of selected quality glass 5.5mm thick mounted on 6 mm thick AC building board or commercial plywood & fixed with wooden plugs with chromium plated brass screws and washer and aluminum beading complete all as directed by Engr-in-Charge. Make: COMMANDER PATTERN / (MANGOLD)/ JASMINE/ GOLDEN FISH or equivalent as approved by GE. |
| 77 | M&L for plain cement concrete bed 1:4:8, type C2 (using 40 mm graded stone aggregate) to drain pipe 100/110 mm bore including packing under and hunching against the sides of pipes after they laid and tested complete all as directed by Engineer-in-Charge. |
| 78 | S&F 80 mm dia bore medium grade galvanised iron tubing with all fittings and fixtures complete laid in trenches or on ground, under floors, fixed on wall etc, complete all as specified and as directed by Engineer-in-Charge. NOTE: Excavation and earth work shall be measured and paid separately. |
| 79 | All as per item No. 78 above but 50 mm dia bore. Make for Item No. 78&79: TATA/ ZENITH / JINDAL |
| 80 | S&F 80 mm bore cast Iron sluice valve, PN 1.6, ISI marked, both ends flanged, with iron wheel, stainless spindle complete with jointing materials, nuts, bolts, washers and rubber gasket etc., complete all as specified and as directed by Engineer-in-Charge. Make:- ZOLOTO Art No. 1079B of 80mm or equivalent model of SCUD/ KARTAR/ DURGA/ KIRLOSKAR or equivalent ISI marked make as approved by GE. |
| 81 | S&F gun-metal, globe or gate valves ofwith iron wheel head, screwed both ends for iron pipe of 50 mm dia bore and fixed complete all as specified and directed by the Engineer-in-Charge. Make : LEADER/NETA/ANCHOR/NMC/ DURGA/ZOLOTO or equivalent ISI marked make as approved by GE. |
| 82 | S&F 50 mm bore non return cast Iron sluice valve, PN 1.6, ISI marked, both ends flanged, with iron wheel, stainless spindle complete with jointing materials, nuts, bolts, washers and rubber gasket etc., complete all as specified and as directed by Engineer-in-Charge. Make:- ZOLOTO Art No. 1079B of 80mm or equivalent model of SCUD/ KARTAR/ DURGA/ KIRLOSKAR or equivalent ISI marked make as approved by GE. |
| 83 | M&L forPlain cement concrete 1:3:6 mix type C2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge. |
| 84 | S&F 50 mm bore PVC foot valve, with jointing materials, complete all as specified and as directed by Engineer-in-Charge. |
| 85 | S&F three phase monoblock pump, with 400V, 3000RPM, Head upto 30mrs,IP-44, class "B" insulation, Impeller, Delivery casing and motor body are made up of Cast Iron, Shaft is made up ofCarbon Steel, Shaft sleeve is made up of Bronze, Power rating 5.5 kW/7.5 HP of suction 80mm dia and delivery 65mm dia with necessary foundation complete all as specified and directed by Engr-in-charge. MAKE: Model No KDS-830++ of make Kirloskar of equivalent in Crompton. |
| 86 | Supply, installing, testing and commissioning factory madeLT feeder pillar box (KIOSK) Outdoor type double door platform mounted, CPRI approved suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system all as specified and directed having copper bus bar installed on DMC/Epoxy insulators. The panel shall be dust and vermin proof, IP-65 class protection and made of 3.15 mm CRCA steel sheet with single door shutter and locking arrangement, openable from front & back both including powder coated on both outer and inner surfaces for panel.The TPN copper bus bar of rating not less than the 1.5 times the rated capacity of the incommer MCCB including 50 x 50 x 6mm thick angle iron frame workupto height of 0.9mtr above ground level (duly painted with one coat red oxide and one coat of bitumen paint on exposed surfaces) with and including following spares all as specified and as directed by Engr-in-Charge. (i)MCCB 4 pole 16 kA 63 Amp- 01 No (Incommer) (ii) MCCB 3 pole 16 kA 25 Amp- 01 No. (iii) Onload change over switch of 100A, 3 Phase - 01 No. (iv) DOL starter suitable for 7.5HP three phase Motor make: L&T - 01 No. (v)Phase indiacting lamps (R-Y-B) - 01 set (vi)Internal wiring with PVC insulated, multi stranded copper conductor cable, 1100 V grade. (vii) Multifunctioning meter with necessary CTs. (viii) Spare compartment for MCCB for future expansion - 01 No. NOTE: Panel shall be CPRI approved and switch gear items shall be of make Legrand/Siemens/Schneider/L&T |
| 87 | Supply and layingin trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 coreand connecting with necessary lugs complete all as specified and directed by Engineer-in-Charge. Note:- Excavation, earth work, brick protection, protection pipe and sand coushioning shall be measured and paid separately. Make of cable shall be CCI / Gloster / ICC / Unistar / NICCO / Asian (RPG) / Havells / Polycab/PRG/Universal/Plaza/Crystal cables/Terracom/ Rallison/Mescab/Jeypore/KEI |
| 88 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm 3 core nominal cross section in service connections complete all as specified and directed by EIC. Make: Havells/Polycab/Finolex or equivalent as approved by GE. |
| 89 | M&L for construction of semi underground water receiving chamber of internal dimension/size 900 x 900 x 900 mm, with 200mm thick pre-cast PCC solid block masonry (made of PCC 1:3:6 type C-1 : using 20mm graded crushed stone aggregate) wall in cement mortar 1:6, with 3 mm thick MS sheet cover, fixed with 25x25x6 mm stiffner welded around, welded over angle iron frame of size 40 x 40 x 6 mm with locking arrangements including applying two coats of black bituminous paint over a coat of red oxide primer on steel surfaces, necessary earth work in soft/loose soil with and including 100 mm thick PCC (1:3:6) Type C-2 (using 40mm graded stone aggregete) as in foundation, 50 mm thick PCC (1:2:4),Type B-1 (using 20mm graded stone agregate) as in coping on top including rendering 10mm thick in cement mortar 1:6, finished even and fair and applying three coats of white wash on exposed surfaces, complete complete all as specified and directed by the Engineer-in-Charge. (The chamber shall be 250 mm above the ground level.) |
| 90 | Earhing complete with galvanized steel earth plate electrode 600X600X6 mm buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below ground level, connected to GI earth strip of size 32x6mm, by means of galvanized iron or steel bolts, nuts, check nuts and washers, and conneced to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh charcoal or coke and common salt in alternate layers, of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C-1 , 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia reinforced bar 15 cm C/C andsuitablehandleof 10 mmdia roundbar, 40 mm GI medium grade pipe for earth lead protectionincludingnecessaryexcavationearthworkinsoft/loosesoilanddisposalofspoiltoadistancen.exc.50 mandnecessarytestingcompleteallasshownonelectricalplateNo. 3ofMESSSRPart-I complete all as specified and as directed by Engineer-in-Charge. NOTE: Rate quoted shall be deemed to include for earth lead and protection pipe upto 7.5m. |
| 91 | M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and includingrigidnonmetallic PVC conduit of suitable size with all necessary fittings, concealed in walls/ceilings etc., including 1.5 Sq mm PVC insulated copper conductorFRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxesconcealed type for mounting of fittings like switch, socket, fan regulator etc. with 3 mm thick laminatedbakelite sheet cover for one light /fan point controlled by one switch/one bell / buzzer point controlled by one bell push/one 3 / 5 -pin switch socket outlet 5 amps on independent board including testing on completion complete all as specified and directed by Engineer-in-Charge. |
| 92 | All as per item No. 91 above but for One 3/5 pin switch socket outlet 5 amps on same board along with other switches complete all as specified and directed by Engineer-in-Charge. |
| 93 | M&L for point wiring with 2.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and includingrigidnonmetallic PVC conduit, medium grade of suitable size with all necessary fittings, concealed in walls/ceilings etc., including 2.5 Sqmm PVC insulated copper conductorFRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxesconcealed type for mounting of fittings like switch, socket, fan regulator etc. with 3 mm thick laminatedbakelite sheet cover for one 5 / 6 -pin switch socket outlet 15 amps on independent board including testing on completion complete all as specified and directed by Engineer-in-Charge. Make for Item No. 91 to 93 Cable:(i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Conduit: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza |
| 94 | S&F switch piano, flush button, single pole, 5 amps, one waycomplete all as specified and as directed by Engineer-in-Charge. |
| 95 | S&F switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5amps flush type complete all as specified and as directed by Engineer-in-Charge. |
| 96 | S&F switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush typecomplete all as specified and as directed by Engineer-in-Charge. |
| 97 | S&F lamp holder, PVC/Polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. |
| 98 | S&F ceiling rose 3 terminal PVC/Polycarnonate, isolated body complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 94 to 98: (i) Anchor (ii) Plaza, (iii) Havells (Crabtree) (iv) ABB (v) Shalabh |
| 99 | S&FEnergy efficient LED Tube light fitting, 1x18/20 watt, with LED tube rod 18/20 Watt with bipin holders, connector block etc., complete with all accessories internally prewired and including connecting up withthree core pvc sheathedflexible copper conductor cable of size 1 sqmm complete all as specified and as directed by Engineer-in-Charge. Make: Cat part DMLN1LT8-16 of Fitting and LTT8-20 of rod of Crompton or HSN Code:8539 & MAS18W865 T8I-2100lm(PC body),20W865 T8INDI-2100 lm(rod) of Philips or Cat No. SUB118T8 LED(Body),SLETL-DSPC REFORM of Surya or LUMELINEBS 18WLED830SPCWH of Havells. |
| 100 | Supply and fixing integrated LED bulk head luminaries comprises of pressuredie cast housing with clear acrylic diffuser & frame and IP 65 protection including 10 W LED bulb and connecting up withexisting cable complete all as specified and as directed by Engineer-in-Charge. MAKE: Cat part No. LBHE-10-CDL of Crompton or Philips Cat no. WT 202W LED 6S NW PSU S2 PC or equivalent in Havells/Bajaj. |
| 101 | S&F 12 W retro fit B-22 LED lamp complete all as specified and as directed by Engineer-in-Charge. Make: Philips/Crompton/Havells. |
| 102 | S&F sheet metal AC earth plug and socket of 3 pin with neutral with one No. MCB SP 20 Amps 240 Volts complete all as specified and as directed by Engineer-in-Charge. |
| 103 | S&F sheet metal enclosure DB SPN 4 way 240 V with 200 Amp rated bus bar, powder coated, double door complete all as specified and as directed by Engineer-in-Charge. |
| 104 | Supply and Fixing of MCB SPN 40 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge. |
| 105 | Supply and Fixing of MCB SPN 25 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge. |
| 106 | Supply and Fixing of MCB SP 6 to 32 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 102 to 106 Legrand/Siemens/Schindler |
| 107 | Earthing completewith galvanizedsteelearthplateelectrode600 x 600 x 6 mmburieddirectlyinground( earthpitnotlessthan2.25 mdeepbellowgroundlevel )withtopedgeoftheplatenotlessthan1.5 m belownormalgroundlevel, connectedtoGIearthlead wire 4 mmdia.bymeansof galvanizedironorsteelbolts , nuts , check nuts andwashers, andconnectedto equipmentsasdirected,includingfunnelwithGI medium grade wateringpipe20 mmbore , wiremesh ,charcoalorcokeandcommonsaltinalternatelayersof15 cmcompactedthicknessallaroundtheearthelectrode ,withconcretepitinPCC1:3:6type C-1 , 50 mmthickprecastRCC1 : 2 : 4typeB-1 coverslabreinforcedwith8 mmdiadeformedbar15 cm C/Candsuitablehandleof 10 mmdia roundbar, 15 mm GI medium grade pipe for earth lead protectionincludingnecessaryexcavationearthworkinsoft/loosesoilanddisposalofspoiltoadistancen.exc.50 mandnecessarytestingcompleteallasshownonelectricalplateNo. 3ofMESSSRPart-I complete all as specified and as directed by Engineer-in-Charge. NOTE: Rate quoted shall be deemed to include for earth lead and protection pipe upto 7.5m. |
| 108 | Supply and fixingExhaust Fan AC Single Phase, 230/240 Volts,of size 300 mm sweep, Heavy duty, with & including louvers, mounting ring, MS rag bolts, nuts, washers etc and connected from ceiling rose/connector with & including suitable size flexible copper conductor PVC insulated sheathed cord, and testing on completion complete all as specified and as directed by the Engineer-in-Charge. Make: CG Model BRISK AIR or equivalent in Polar/ Havells/ Khaitan/Usha/Orient |
| 109 | Supply and spreading of dry sand in trenches for cable coushioning and punned down complete all as specified and directed by Engineer-in-Charge. Note:- Punned thickness only shall be measured for payment purpose. |
| 110 | M&L for common burnt bricks, sub class "B", of size 250 x 125 x 75 mm laid in trenches for cable protection complete all as specified and directed by Engineer-in-charge. |
| 111 | Supply and layingin trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with solid aluminium conductor of size 10 sqmm 2 coreand connecting with necessary lugs complete all as specified and directed by Engineer-in-Charge. Note:- Excavation, earth work, brick protection, protection pipe and sand coushioning shall be measured and paid separately. Make of cable shall be CCI / Gloster / ICC / Unistar / NICCO / Asian (RPG) / Havells / Polycab/PRG/Universal/Plaza/Crystal cables/Terracom/ Rallison/Mescab/Jeypore/KEI |
| 112 | Material and labour for25mm dia bore GI tubing Light grade, laid under roads/ floor, or fixed to wall or along the pole with suitable size M.S.flat iron clamps, nuts, bolts and washersfor cable protection complete all as specified and directed by Egineer-in-Charge. Make: TATA/ZENITH/JINDAL. |
| 113 | M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and includingrigidnonmetallic PVC casing and capping of suitable size with all necessary fittings, fixed on walls/ceilings etc., including 1.5 Sq mm PVC insulated copper conductorFRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface typefor mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminatedbakelite sheet cover (Make: Hylem orequivalent ) for housing switches, socket outlet, regulator etc., for one light /fan point controlled by one switch/one bell / buzzer point controlled by one bell push/one 3 / 5 -pin switch socket outlet 5 amps on independent board including testing on completion complete all as specified and directed by Engineer-in-Charge. |
| 114 | M&L for point wiring with 2.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and includingrigidnonmetallic PVC casing and capping, medium grade of suitable size with all necessary fittings, fixed on walls/ceilings etc., including 2.5 Sqmm PVC insulated copper conductorFRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface typefor mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminatedbakelite sheet cover (Make: Hylem orequivalent ) for housing switches, socket outlet, regulator etc., for one 5 / 6 -pin switch socket outlet 15 amps on independent board including testing on completion complete all as specified and directed by Engineer-in-Charge. Make for Item No. 113&114 Cable:(i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Casing&Caping: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza |
| 115 | S&F2" surface/wall mounted LED batten 10 watt, CCT - 5700K, system lumen output not less than 950lm, extruded aluminium housing with high quality Polycabonate diffuser, Operating temperature: -10° C to +45° C, Operating voltage range: 140-270 V, Average LED life L70B50: 50000 hours, CRI = 80, system efficacy =95, including necessary screwing/fixing etc and connecting up with ceiling rose complete all as specified and as directed by Engineer-in-Charge. Make:Crompton Cat part No "LDL-10-CDL" or equivalent in Philips/Havells. |
| 116 | M&L for sub main wiring complete with 2 runs of 4 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor and drawing through and including non metalic rigid PVC conduit of 25mm dia medium grade fixed on wall/ceiling and connecting terminal ends including provision of 1 run of 4 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor as earth continuity conductor and connecting to earth dolly complete all as directed by Engr-in-charge. Note: 2 runs of 4 Sqmm and one run of 4 Sqmm and one run of conduit shall be measured as one unit length. Make Cable:(i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Conduit: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza |
| 117 | Supply and fixingExhaust Fan AC Single Phase, 230/240 Volts,of size 200 mm sweep, 1300 RPM, with minimum airflow/air delevery 450Cmh, light weight, rust proof body & blades with & including self opening louvers, bolts, nuts, washers etc and connected from ceiling rose/connector with & including suitable size flexible copper conductor PVC insulated sheathed cord, and testing on completion complete all as specified and as directed by the Engineer-in-Charge. Make: CG Model BRISK AIR or equivalent in Polar/ Havells/ Khaitan/Usha/Orient |
| 118 | S&F brass cromium plated toilet paper holder flat recessed type all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K/ESSCO (DELUXE) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
