Repair / Replacement Of Roof Sheeting False Ceiling And Connected Items In Certain Buildings At Air Force Station Thoise Under Air Force Station Thoise Under Ge Af Thoise
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 May 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thoise → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair / Replacement Of Roof Sheeting False Ceiling And Connected Items In Certain Buildings At Air Force Station Thoise Under Air Force Station Thoise Under Ge Af Thoise
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-May-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-May-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering etc complete all as specified and directed by Engr-in-Charge. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge |
| 3 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/blankets, any thickness, including any thickness complete all as specified and directed by Engr-in-Charge |
| 4 | Dismantling timber framed work in fillets, rails posts, rafters, purlins, etc. Under 40 Sq.cm in section etc. complete all as specified and directed by Engr-in-Charge |
| 5 | Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position etc. complete all as specified and directed by Engr-in-Charge |
| 6 | S&F 0.63 mm thick Galvanised, corrugated mild steel shetting with two corrugations side lap, fixed with coach screws, washers, andL - type orJ-type or cranked hook bolts in lieu of screw in roof sheeting, walls etc. with grade of zinc coating 275 etc complete all as specified and directed by Engr-in-Charge |
| 7 | S&F 0.63 mm thick plain Galvanised, mild steel shetting in ridges, hips, vally gutters, drip, straight flashing & fixed with coach screws, washers, and L-type or J-type or cranked hook bolts in lieu of screw in roofs, walls etc. (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed by Engr-in-Charge |
| 8 | M&L for preparation of new zinc (or galvanised) comouflage pattern surfaces to receive painting, by a coating with mordant solution including washing and cleaning and applying two coat synthetic enamel paint over a coat of zinc crome, red oxide etc complete all as specified and directed by Engr-in-Charge |
| 9 | M&L for mild steel for wind ties for roof including securing bolts, screwing etc. & for doors, balusters, nosing to steps including embeding in concrete andposts and strutsincluding cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge |
| 10 | M&L for structural steel work for framed work such as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering. doorsto be prepared for hanging or sliding with including either hooks or hinges or steel hanging door fittings and fixing (exclusive of steel sheeting or covering) confirming to Fe 290 (Gde E165), complete all as specified and directed by Engr-in-Charge |
| 11 | M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 grade St-240 complete all as specified and directed by Engr-in-Charge |
| 12 | M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge |
| 13 | M&L second class hard wood plain fillets square, rectangular or triangular in section area exc 6 sq.cm & n.exc 13 Sq.cm, clean sawn, se-cured with nails or brads complete all as specified and directed by Engr-in-Charge |
| 14 | M&L for second class hard wood timber framed in scantling fixed, clean sawn complete all as specified and directed by Engr-in-Charge |
| 15 | M&L for 6 mm thick Veneered decorative plywood, grade 1 (5 Nos of ply) (with BWR resin) with decorative face veneers on one side faces, fixed with nails to timber frame work as in ceiling, flat or sloping etc complete all as specified and directed by Engr-in-Charge |
| 16 | M&L for 6 mm thick plywood, grade BWR, type BB fixed with screw to timber frame work as in ceiling, flat or sloping etc complete all as specified and directed by Engr-in-Charge |
| 17 | S&F in repair anodised aluminium snap grid of size 605 x 605 mm frame work for false ceiling incl hangers 6 mm dia (upto 1200 mm length ) adjusting level fixed to roof slabs/ roof truss by means of ceiling cleats made out of GI flats 40x3 mm size 60 mm long and expension hold fasteners 12.5 mm dia and 40 mm long complete all as specified and directed by Engr-in-Charge |
| 18 | M&L for fixed in repair 10 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/aluminium framed work in ceiling flat or sloping etc complete all as specified and directed by Engr-in-Charge |
| 19 | M&L for Gypsum Board 12 mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed by Engr-in-Charge |
| 20 | M&L for preparing new or previously untreated wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic varnishing finishing coat, over a coat of wood filler coat complete all as specified and directed by Engr-in-Charge |
| 21 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge |
| 22 | M&L for cement concrete 1:2:4 type B1 (20 mm graded aggregate) as in copings, cills, steps;seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, kneelers, apex stones, bed plates, roof kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge |
| 23 | Demolition PCC block or stone/ boulder masonary built in cement mortar complete all as specified and directed by Engr-in-Charge |
| 24 | M&L for Precast cement concrete block Masonry with solid blocks of Type C-1 cement concrete 1:3:6, (using 20mm graded stone aggregates), exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge |
| 25 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge |
| 26 | M&L rendering 10 mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 27 | M&L 15 mm thick rendering on fair faces of concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 28 | M&L for prepration of new plastered surfaces of walls and applyingtwo coats of cement base paintover a coat of primer complete all as specified and directed by Engr-in-Charge |
| 29 | M&L for prepration of new plastered surfaces of walls and applyingtwo coats of oil bound distemper over a coat of chalk whiting primer complete all as specified and directed by Engr-in-Charge |
| 30 | S&F for 5mm thick transparent Perspex sheet fixing to aluminium frame /iron frame/wooden frame etc with self tapping screws/bolts etc complete all as specified and directed by Engr-in-Charge |
| 31 | Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified and directed by Engr-in-Charge |
| 32 | Applying evenly a tack coat including cleaning priming surfaces and applying heavy treatment for severe condition using glass fibre base bitumen felt, grade 2 complete all as specified and directed by Engr-in-Charge |
| 33 | M&L for APP based polymeric membrane minimumweighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed steel surface by forced application incl taking out old sheets complete all as specified and directed by Engr in Charge. |
| 34 | M&L for cutting and chases into old masonary to form toothing bonding in new bricks or stonework, making good in Cement Mortar complete all as specified and directed by Engr-in-Charge |
| 35 | M&L for preparation of old steel surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge |
| 36 | M&L for preparation of old wooden surfaces of any description, over 10cm width or girth, not otherwise described and applying onecoat of synthetic enamel paintcomplete all as specified and directed by Engr-in-Charge |
| 37 | M&L for prepration of old decorated plastered surfaces and applyingone coat of cement base painton old plastered surface complete all as specified and directed by Engr-in-Charge |
| 38 | M&L for preparing oldplaster surfaces of walls andapplying two coats of white wash complete all as specified and directed by Engr-in-Charge |
AI Tender Summary
Tender Timeline
May 11, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
May 18, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 20, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender