|
| 1 | Wooden Cupboard with Glazed shutter, size 1422.4mm X 2616.2mm |
| 2 | Providing and fixing in position 500mm deep wooden cupboard of required size made of 19mm thick BWP board of approved make on Top, bottom, sides, partitions, shelves, shutters 12mm thick of BWP ply of approved make at back of cupboard as per drawing 4.0mm thick veneer of approved make and shade on shutter and exposed/visible sides of cupboard.0.8mm thick laminate shall be fixed on all unexposed/inner faces of cabinet.Back side of the cabinet shall be finished in two or more coats of synthetic enamel paint of approved make and colour including antitermite treatment, wooden lipping suitable locking arrangement, all types of screws, fasteners, hinges (soft close) polishing, magnetic catchers, handles/knobs tower bolts and all necessary fittings as per Design/Drawings/site conditions and as directed by Engr-in-Charge. (Only front elevation area shall be measured in Sqm for payment.) (Ref Drg No.A) |
| 3 | Wooden Cupboard with Glazed shutter, size 1498.6mm X 2616.2mm.Providing and fixing in position 500mm deep wooden cupboard of required size made of 19mm thick BWP board of approved make on Top, bottom, sides, partitions, shelves, shutters 12mm thick of BWP ply of approved make at back of cupboard as per drawing 4.0mm thick veneer of approved make and shade on shutter and exposed/visible sides of cupboard.0.8mm thick laminate shall be fixed on all unexposed/inner faces of cabinet.Back side of the cabinet shall be finished in two or more coats of synthetic enamel paint of approved make and colour including antitermite treatment, wooden lipping suitable locking arrangement, all types of screws, fasteners, hinges (soft close) polishing, magnetic catchers, handles/knobs tower bolts and all necessary fittings as per Design/Drawings/site conditions and as directed by Engr-in-Charge. (Only front elevation area shall be measured in Sqm for payment.) (Ref Drg No.A) |
| 4 | Niche Storage Cabinet size 1752.6mm X 863.6mm, Niche Storage Cabinet size 1422.4mm X 863.6mm, Niche Storage Cabinet size 1397mm X 863.6mmProviding and fixing in position three Nos500mm deep wooden storage cabinet under niche of required size made of 19mm thick BWP board of approved make on top, bottom, sides, partitions, shelves and shutters.12mm thick BWP ply of approved make at the back of the cabinet as per drawing.4.0mm thick veneer of approved make and shade on shutters and exposed sides of cabinet wherever required and 0.8mm thick laminate shall be fixed on all unexposed inner faces of the cabinet. Back of side faces shall be finished in two or more coats of synthetic enamel paint of approved make and colour including antitermite treatment, wooden lipping, suitable locking arrangement, all types of screws, fasteners, hinges (soft close) wooden screws, adhesives, polishing magnetic catchers, tower bolts and handles/knobs and all other type of necessary fittings etc. Complete as per drawings, Design and site condition and as directed by Engineer-in-Charge (only front elevation area shall be measured in Sqm for payment.) (Ref Drg No.A) |
| 5 | Pantry Cabinet under the Counter. Providing and fixing Pantry Cabinet under Counter of size 1752.6mm X 711.2mm and 1270mm X 711.2mm. 600mm deep housed in wall enclosure of required size and dimensions as per design and drawing, consisting of wooden box made of 18mm thick BWP Ply of approved make on Top, bottom, sides, partitions, shelves and shutters.12mm thick BWP Ply in drawer unit and back of the cabinet.1.0mm thick cabinet of approved make and shade on shutters and exposed sides of cabinets wherever required, and 0.8mm thick laminate shall be fixed on all unexposed inner faces of laminated.Stainless steel basket cutlery drawers, SS large utensil (ONE) holder with accessories including antitermite treatment wooden lipping, suitable locking arrangement all types screws fastness hinges/piano hinges, wooden screws adhesives polishing/paintings, telescopic drawer, channels magnetic catchers tower bolts door handles/knobs and all other type of necessary fittings etc.Complete as per drawings and design and site condition as directed by Engineer-in-Charge (only front elevation area shall be measured in Sqm for payment.) (Ref Drg No.B) |
| 6 | Pantry Overhead Wooden Cabinet.Providing and fixing pantry cabinet over the counter size 1752.6mm X 787.4mm and 400 mm deep with one shelf wooden storage cabinet wooden storage cabinet under niche of required size made of 19mm thick BWP board of approved make on top, bottom, sides, partitions, shelves and shutters.12mm thick BWP ply of approved make at the back of the cabinet as per drawing.1.0mm thick laminated of approved make and shade on shutters and exposed sides of cabinet wherever required and 0.8mm thick laminate shall be fixed on all unexposed inner faces of the cabinet. Back of side faces shall be finished in two or more coats of synthetic enamel paint of approved make and colour including antitermite treatment, wooden lipping, suitable locking arrangement, all types of screws, fasteners, hinges (soft close) wooden screws, adhesives, polishing magnetic catchers, tower bolts and handles/knobs and all other type of necessary fittings etc. Complete as per drawings, Design and site condition and as directed by Engineer-in-Charge (only front elevation area shall be measured in Sqm for payment.) (Ref Drg No. C) |
| 7 | Wooden Cupboard/Wordrobe.Providing and fixing in position 600mm deep wooden Cupboard/Wardrobes of required size2997.2mm X 1117.6mm, 2717.8mm X 1219.2mm and 2946.4mm X 1117.6mm as per drawings(Three numbers) made of 19mm thick thick BWP board of approved make on Top, bottom, sides, partitions, shelves, shutters 12mm thick of BWP ply of approved make at back of cupboard as per drawing 1.0mm thick laminated of approved make and shade on shutter and exposed/visible sides of cupboard.0.8mm thick laminate shall be fixed on all unexposed/inner faces of cabinet.Back side of the cabinet shall be finished in two or more coats of synthetic enamel paint of approved make and colour including antitermite treatment, wooden lipping suitable locking arrangement, all types of screws, fasteners, hinges (soft close) polishing, magnetic catchers, handles/knobs tower bolts and all necessary fittings as per Design/Drawings/site conditions and as directed by Engr-in-Charge. (Only front elevation area shall be measured in Sqm for payment.) (Ref Drg No.D) |
