Housing Urban and Rular Development Government Departments Closing in 0 days TDR #32053671

Annual Repair Maintenance Of Hppwd Division Office Building At Gohar ( Sh Construction Of Toilet Block Attached Division Office Building In First Floor )

Issued by Government Departments · gohar, Himachal Pradesh
Tender Value
6.07 Lakhs
Estimated cost
Bid Submission
05 May 2022
0 days left
EMD
12200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
gohar → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Annual Repair Maintenance Of Hppwd Division Office Building At Gohar ( Sh Construction Of Toilet Block Attached Division Office Building In First Floor )

BOQ

Name of Work:-A/R & M/O HPPWD Division office building at Gohar (SH:- C/O toilets block atteched Division office building in Ground & 1st floor )
Sl. No. Item Description
1Dismantling roofing including ridges, hips, valleys and gutters etc, and stacking the material within 50 metres lead of G.S. Sheet with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
2Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
3Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
4Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge Nominal concrete 1:4:8 (one cement:four sand: eight graded stone aggregate) or leaner mix with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
5Dismantling of flushing cistern of all types (CI/PVC/Vitrious China) including stacking of useful materials with in 50 metres lead.with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
6Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1,5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
7Providing and laying cement concrete 1.5.10 (one cement: five sand ten graded stone aggregate40mm (Forty millimetre) mechanically mixed and curing complete excluding the cost of form work infoundation and plinth as per direction of Engineer-in-Charge including carriage of materials with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
8Providing form work with steel plates 3.15mm(Three point fifteen millimeter) thick welded with angle iron in frame 30x30x5mm(Thirty millimeter into thirty millimeter into five millimeter) so as to give a fair finish including centering, shuttening, strutting and propping etc. with wooden battens and bellies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in situ-reinforced concrete and pain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge in
9Foundations, footings, bases of columns, etc. for mass concrete
10Lintels, beams, plinth beams, girders, bressumers and cantilevers
11Suspended floors, roofs, landings, balconies and access platform, Shelves.
12Providing and laying in position specified grade of reinforced cement concrete, excluding cost of centering shuttering, finishing and reinforcement in all works upto plinth level CC 1:1.5:3 (one cement:one point five sand: three graded stone aggergate) as per Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentalscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
13Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1.1.5.3 (one cement: one point five sand: three graded stone aggregate 20 mm nominal size)with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
14Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five sand : three graded stone aggregate twenty milimetre nominal size) with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
15Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1.6 12 (one cement : six sand : tweleve graded stone aggregate twenty milimetre nominal size) upto plinth level with Cement mortar 1.6 (one cement : six coarse sand)with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
16Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500 or more.with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
17Half brick masonry with common burnt clay F.PS (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level. Cement mortar 1:4 (one cement : foursand) with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
18Brick work using common burnt clay FPS (non modular) building bricks in super structure in cement mortar 1.6 (one cement : six sand) 2nd (second) class brick with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
1915 mm (fifteen milimetre) cement plaster on rough side of single or half brick wall of mix 1.6 (one cement : sixsand)with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
206 mm (six milimetre) cement plaster of mix 1:3 (One cement: three sand)with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
2125 mm (twenty milimetre)thick Kota stone slab flooring over 20 mm (twenty milimetre) (average) thick ase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, includingrubbing and polishing complete with base of cement mortar 1: 4 (one cement: four sand) with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
22Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm (tweleve milimetre) thick bed of cement mortar 1:3 (one cement : three sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
23Providing and applying white cement based putty of average thickness 1 mm(one milimetre)of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
24Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
25Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions Le at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/paneling CP brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required Powder coated aluminium (minimum thickness of powder coating 50 micron) with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
26Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions Le at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/paneling CP brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required Powder coated aluminium (minimum thickness of powder coating 50 micron)with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
27Providing and fixing 12 mm (tweleve milimetre) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
28Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in charge With float glass panes of 4.0 mm (four milimetre) thicknesswith in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
29Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than gradeAC 10 as per IS 1868) transparent or dyed torequired colour or shade, with nuts and screwsetc.complete with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. 250x13 mm.(two hundred fifty x thirteen milimetre)
30Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 asper IS 1868) transparent or dyed to required colour orshade, with necessary screws etc complete.with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
31150x10mm (One hundred fifty x ten millimeter)
32100x10mm (One hundred x ten millimeter)
33Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. 100 mm (One hundredmillimeter)
34Providing and fixing bright finished brass hard drawn hooks and eyes with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.200mm (Two hundred millimeter)
35Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
36Stone soling/boulder filling dry hand packed in under floor as per the direction of Engineer-in-charge with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
37Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:4.8 (one cement : four sand : eight graded stone aggregate) with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
38Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. 15 mm (fifteen milimetre) nominal bore
39Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approvedbrand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
40Providing and fixing viterous China wash basin COUNSEL SET CAT NO S2040101 Wash Basin 510 x 400X225 mm (five hundred x four hundred x two hundred twenty five milimetre) and pedestal cat no. 52090101 of Cera or equivalent including cutting holes & making good the same and carriage of materials within all leads and lifts:- Of Superior quality with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
41Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm (five hundred eighty x three hundred eighty x three hundred fifty milimetre) with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls and floors wherever required : Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
42Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm (thirty two milimetre) dia with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
43Providing and fixing uplasticised PVC connection pipe with brass unions : Semi rigid pipe 32 mm (thirty two milimetre) dia with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
44Providing and fixing 600x450 mm (six hundred x four hundred fifty milimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
45Providing and fixing C.P. brass long nose bib cock Cat no.CON 107KN Jaquar or equi alent single control of approved quality conforming to IS standards. 15 mm (fifteen milimetre) nominal bore with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
46Providing and Fixing Angular stop cock with wall flange of opel prime no. CON 150083KN Cock of jaquar or equavalent complete in all respect.with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
47Providing and Fixing Angular stop cock with wall flange of opel prime no. CON 150083KN Cock of jaquar or equavalent complete in all respect.with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
48Providing and Fixing Soap dish stainless steel CAN-1131N of Jaquar or equivalent complete in all respect. with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
49Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm.(fifteen milimetre)with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
50Providing and fixing 600x120x5 mm (six hundred x one hundred twenty x five milimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
51Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm (fifty milimetre) nominal bore with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
52Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred ten milimetre) with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
53Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm x 90 mm (one hundred ten x ninety milimetre) with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.
54Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm (three milimetre)thick bolts and nutsISI marked complete including fixing with approved adhesive etc with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. I) 110mm (one hundred ten milimetre) dia
55Providing and fixing PVC plain bendISI marked including fixing with approved adhesive etc. complete.with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge. I) 110mm (one hundred ten milimetre) dia
56Providing and fixing PVC collarsISImarked including fixing with approved adhesive etc. complete.with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.110mm (one hundred ten milimetre) dia
57Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal lplugs etc complete with in all leads and lifts and other incidentialscomplete and as per the entire satisfaction and direction of Engineer-in-Charge.110mm (one hundred ten milimetre) dia

AI Tender Summary

OUR REF NO 32053671
AUTHORITY Government Departments
TENDER VALUE 6.07 Lakhs
LAST DATE 05-05-2022
Authority
Authority Name Public Works Department
Work Description Annual Repair Maintenance Of Hppwd Division Office Building At Gohar ( Sh Construction Of Toilet Block Attached Division Office Building In First Floor )
Basic Detail
Tender No 1286-92 dt. 27.04.2022
Bidding Type Tender
Location
City gohar
State Himachal Pradesh
Key Dates
Publish Date 30 Apr 2022
Submission Date 05 May 2022
Open Date 06 May 2022
Finance
Tender Value 6.07 Lakhs
Tender Fee 500
EMD 12200
Exemption Not Available
Document List
b881fe15-b1dd-4467-a9ff-8fb337b0808c.html
2.pdf
BOQ_90957.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Apr 30, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
May 05, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 06, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

b881fe15-b1dd-4467-a9ff-8fb337b0808c.html

pdf

2.pdf

xls

BOQ_90957.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender