}

Construction Of Auditorium Block At Govt Degree College Bhaderwah By Way Of Electrification Works ( C No. 06 ) , bhaderwah-Jammu And Kashmir

Jammu And Kashmir Police Housing Corporation has published Construction Of Auditorium Block At Govt Degree College Bhaderwah By Way Of Electrification Works ( C No. 06 ) . Submission Date for this Tender is 10-05-2022. Electrification Work Tenders in bhaderwah Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

32051414
Construction Of Auditorium Block At Govt Degree College Bhaderwah By Way Of Electrification Works ( C No. 06 )
Open Tender
Indian
Jammu And Kashmir
bhaderwah
10-05-2022

Tender Details

Construction Of Auditorium Block At Govt Degree College Bhaderwah By Way Of Electrification Works ( C No. 06 )

Key Value

Document Fees
INR 2000 /-
EMD
Refer document
Tender Value
INR 34.51 Lakhs /-

BOQ Items

Name of Work :-Construction of Auditorium Block at Govt Degree College BhaderwahBy way of Electrification Works ( C No. 06)
Sl. No. Item Description
1Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI boxetc. as required.
2supply and fixing of 5 inch dia Fan Box / concealed box with round sheet cover for covering the base and bottom and dual painted with red oxideMake:- Anchor/Indoasian/havells 0r equivalent
3Providing Installation testing and commissioning ofCeiling Fans of approved brands with connections etc as required Make:- Anchor/Indoasian/havells
4Supply & Fixing of additional Fan rods Make:- Anchor/Indoasian/havells
5Supplying and fixing two module Stepped type electronic Fan Regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
6Supply installation & fixingof 100 Watt wall/ Ceiling Light , LED Lumanaire Focus light(Warm Light) including Connections etc as requiredFor auditorium
7Supplying and fixing of 24x24 inch 36W slim LED Panel lights For auditorium
8Supplying and fixing of1x25 watt LEDfiiting 4 feet long wall /surface mountingLUMINAIRE including connections etc as required
9Supply & installation, of Conciel Boxfor LED Panelas required
10Supply,installation,testing and commissioning of Ceiling LED Panel type 14 watt day milky fitting with connections as required
11Supply,installation,testing and commissioning of Ceiling LED Panel type 10 watt day milky fitting with connections as required
12Supply & Installation of Bulk Head Lights including connections,testing commissioning etc as required
13Supply & Installation of Exhaust Fans With Metal Exhaust 300 mm(12") in the existing opening including connections,testing commissioning etc as required
14Supply & Installation of WallFans With ABS blades and easy tilting mechanism,2200 RPM including connections,testing commissioning etc as required
15Providing ,installation,testing and Commissioning of 100 watt LED Flood light with GI Pipe with connection etc as required
16Supply and fixing ofCeiling rose on the existing junction box/wooden box including connections as required 1.33
17Supply and fixing Modular Blanking Plate on the existing modular plate and switch box excluding modular plateas required
18SupplY , fixing, testing & commissioning of Call Bell which includes connections etc
19Supply and fixing Indicator on the existing modular plate and switch box excludingas required
20Supply & drawing 2 pair0.5 sqmm FR PVC Insulated annealed copper conductor,unarmoured Telephone cable in the existing surface/recessed steel/ PVC Conduit as required
21Supplying and fixing of Telephone Socket outlet modular Switch/ Socket on the existing Modular Plate and switch box including connections but excluding modular plateas required
22Supplying and fixing ofTVantenna Socket outlet modular Switch/ Socket on the existing Modular Plate and switch box including connections but excluding modular plates as required Make:- Anchor/ luminous/havells 0r equivalent
23Supply & drawingco axial TV Cable RG 6 grade o.7 mm solid copper conductor PE insulated, shielded with fine tinned copper brand 7 protected with PVC sheath in the existing surface/recessed steel/PVC Conduit as required
24supply and fixing of modular D-link Computer socket on modular zinc passivated box of 2 module (Make:D-Link)
25Providing & Laying D-Link Cat-6 Computer wire in existing Conduit (Make:D-Link
26Supply and fixing ofCeiling rose on the existing junction box/wooden box including connections as required
27Supply and fixing Modular Blanking Plate on the existing modular plate and switch box excluding modular plateas required
28Supplyinglaying & making outdoor connections & other jointing materials for 3.5X 240 sqmm LT Power Cable ,Almunium Conductor, ARMOURED
29Supplyinglaying & making outdoor connections including aluminium lugs and other jointing materials for 3.5X 95 sqmm LT Power Cable ,Almunium Conductor, ARMOURED
30Earth work/ Trench Cutting 60 cm X 60 cm for laying of75 mm dia PVC Pipe including laying of 300 sqmmArmoured cable and RE-fillingof trench
31Providing and fixingAluminium Thimbles for making connections to 3.5 X 240/95sqmm Cable.
32Supply ,instalation,fabrication and commissioning of Low voltage Double Door Main Panel on 415 volts 3 phase 50 htzs of 2mm thick CRCA / Sheet of powder size6x 6 x1.5 rft . a)Providing and fixing 400 amp TPN A1.Bus bar with required nos of thimbles etc (2 nos)b)400 amp 4 pole MCCB with35 ka breaking capacity (1 Nos) c)350 amp 4 pole change over switche)250 amp 4 pole MCCB WITH 35 KAbreaking capacity(2 nos)f)63 amp TPN (10 nos) g)VSS meter/switch h) ASS meter/ switch
33Supply & Fixing of following size of medium class PVC Conduits along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduits as required
3425 mm
3540 mm
36Supplying and fixingof following way horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
378 way (4 + 24) double door
3816 way SPNDB
39Supply Installation, Testing & Commissioning of SPAREBOX.
40Supply & Fixingfollowing sizeTPN
4163 amps TPN
42Supply & Fixingfollowing size SPN
43SPN 63 amps
4440 ampsSPN
4532 ampsSPN
46Supplying and fixing of 5 amps to 32 amps rating 240/415 volts "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of Approved Brand.
47Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
481.5Sq. mm wire for Inverter
492 x 2.5 Sqmm + 1 x 2.5 sqmm
502 x 4 Sqmm + 1 x 4 sqmm
512 x 6 Sqmm + 1 x 6 sqmm
524 x 10Sqmm + 1 x 6 sqmmearth wire
53Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.& Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections for HEATING pointsetc. as required.
546 Module (200mmX75mm)
556 pin 15/16 A socket outlet&15/16 A switch
565 pin 5/6 A socket outlet & 5/6 A switch
57Supplying and fixing 3 Module(100mmX75mm)GI Box with modular plate & cover infront including providing 3 pin 5/6 A modularswitch /socketincluding connections etc. as reqd.
58Supplying and fixing suitable size 8 module GI Box with modular plate & cover infront including providing 3 Nos 6 Amp modularsocket Controlled by 16 Amp Switch including connections etc. as reqd.
59Supplying and fixing following 5 pin 5/6 A modularswitch /socket on the existing modular plate & swichbox including connections etc. as reqd.
60Providing and fixing of2 way AC Box with MCB mounting and connections etc as required.
61SITC OF INVERTER 2000 va with 150 AH Double Battery
62Disposal of unwanted Mulba/ material from the site of work including Cheselling & repairing whereever required
63S.I.T.C of Photo smoke detector.Make system Censor
64S.I.T.C of Manual call boxwith hammer complete as req.
65S.I.T.C of electronic hooter with audible range of 25-30mtr with suitable output wattage as req. Make
66SITC of 6 zones solid-state main control panel suitable for wall mounting confirming to IS-2189 fabricated out of 16 guage CRCA sheet incorporating audio visual indication foreach zones & 2x12V sealed dry maint. Free battery not less than 07AH capacity & battery charger complete.
67S/l of 2 x 1.5 sqmm dia PVC insulated copper conductor armoured cable directly on the surface complete as req.
6825 mmPVC Conduit
69Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
70Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.
71Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc.complete as required.
72Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.
73Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
74Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
75Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail