Renovation Of Itahar C.C.C., Installation Of New Boring, Development Of Adjacent Area And Other Allied Works In The Premises Of Itahar Ccc Under Raiganj Division, Dist.-Uttar Dinajpur.
Tender Value
9.53 Lakhs
Estimated cost
Bid Submission
20 May 2022
0 days left
EMD
19078
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
itahar → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Itahar C.C.C., Installation Of New Boring, Development Of Adjacent Area And Other Allied Works In The Premises Of Itahar Ccc Under Raiganj Division, Dist.-Uttar Dinajpur.
BOQ
| Sl. No. | Item Description |
| 1 | civil works |
| 2 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and inany floor including removing rubbish within a lead of 75m as directed. |
| 3 | Dismantling all types of plain cement concrete works, stacking servicable materials at site and removing rubbish as directed within a lead of 75m. |
| 4 | Ground floor including roof, upto 150 mm. thick |
| 5 | Dismantling R.C. floor, roof, beams etc. including cuting rods and removing rubbish as directed within a lead of 75m including stacking of steel bars. |
| 6 | Ground floor including roof |
| 7 | Dismantling all types of masonry excepting plain cement concrete reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. |
| 8 | In ground floor including roof. |
| 9 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge |
| 10 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.Depth of excavation not exceeding 1,500 mm. |
| 11 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating the same by thorough saturation with water ramming complete including the cost of supply of sand. (Payment to be made on measurment of finished quantity) |
| 12 | Single brick flat soling of picked jhama bricks including ramming and dressing bed toproper level and filling joints with powdered earth or local sand. |
| 13 | Ordinary cement concrete (Mix 1:2:4) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. Pakur variety.a) in G.floor (b) River bazree |
| 14 | Ordinary Cement concrete (mix 1:1.5:3) with graded stonechips(ii ) River Bazree in g.f |
| 15 | Cement concrete with graded stone ballast (40 mm. size excluding shuttering)In ground floor. NB variety. 1:3:6 proportion. |
| 16 | 25 mm to 30 mm thick shuttering without staging in foundation etc. |
| 17 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter- section, complete as per drawing and direction. For works in foundation, basement and upto roof of ground floor/upto 4m.Tor Steel/Mild Steel.OTHER MANUFACTURERS NOT SPECIFIED |
| 18 | Brick work with 1st class bricks in cement mortar (1:6) |
| 19 | In foundation and plinth |
| 20 | In superstructure, ground floor |
| 21 | 125mm thick brick work with Ist class bricks in cement mortar (4:1) in gound floor. |
| 22 | Plaster ( to wall, floor, ceiling etc ) with sand and cement morter including rounding off or chamfering cones as directed and racking out joints for roughening of concrete surface including throuting, nosing and dropcourse where necessary (gr. Floor) |
| 23 | 20 mm thick plaster.with (6: 1) cement mortar |
| 24 | 15 mm thick plaster.with (4: 1) cement mortar |
| 25 | 10 mm thick plaster.with (4: 1) cement mortar |
| 26 | Neat cement punning about 1.5mm thick in wall dado, window, sills floor drain etc.Note : Cement 0.152 cu. M per 100 sqm. |
| 27 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.In ground floor. |
| 28 | M.S or WI ornamentals grill of approved desogn joints continuously welded with M.S WI flats and bars for windows railing etc fitted and fixed with necessary screws and hinge in ground floor. a) Grill weighing above 10 kg/ sqm and up to 16 kg / sqm |
| 29 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)3 mm thick (weighing 7.4 kg/Sq.m) |
| 30 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) |
| 31 | Priming one coat on steel or other metal surface with synthetic enamel/oil bound primer of approved quality including smoothening surface by sand papering etc. |
| 32 | Painting with best quality synthetic enamel paint of approvedmake and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. |
| 33 | (a) On timber or plastered surface With hi-gloss of approved qualityTwo coats (with any shade except white) |
| 34 | (b) On steel or other metal surface With other than hi-gloss of approved qualityTwo coat (with any shade except white) |
| 35 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. Two Coats |
| 36 | Two coats |
| 37 | Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required.The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. |
| 38 | (a) Normal Acrylic Emulsion |
| 39 | In ground floor. |
| 40 | Applying Exterior grade Acrylic Primer of approved quality and brand on plastered or concretesurface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior Immersion paint including scrapping and preparing the surface thoroughly, complete as per manufacturer\"s specification and as per direction of E.I.C |
| 41 | (ii)One coat on new surface. |
| 42 | In ground floor. |
| 43 | Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door nframe ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming toIS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge.( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc)10-12 Micron thickness Annodizing film Natural white |
| 44 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium slidingWindow of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminiumalloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge.10-12 Micron thickness Annodizing film Natural white |
| 45 | Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminiumfixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film. Natural white.b) For unsupported length of vertical member above 1.50m. height of both ends of vertical member restrained but panel above 0.90 sqm |
| 46 | Supplying, fitting & fixing UPVC pipes A-type and fittings IS:13592-1992 with all necessary clamps nails, including making holes in walls, floors etc.and cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including joining with jointing materials (Spun yarn, valamoid/bitumen/ M. seal.etc.) complete. |
| 47 | 110 mm dia. UPVC pipes |
| 48 | Shoe 110 mm dia. |
| 49 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately). For Exposed Work. PVC Pipes. (dia.) |
| 50 | 40 mm |
| 51 | 32 mm |
| 52 | 25 mm |
| 53 | 20 mm |
| 54 | 15 mm |
| 55 | Cleaning and removing mud upto 2000 litre Water Tank including masonryreservoir. |
| 56 | Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir. |
| 57 | Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed. Upto 30 users.(i) Beyond a lead of 150 metre |
| 58 | Cleaning soak pit by removing the top slab and replacing inner fillings with jhama bats and repairing the pit as necessary including fitting the slab. |
| 59 | Cleaning silt of inspection pit. |
| 60 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 61 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with CI brackets on 75 mm x 75 mm. wooden blocks, CP west fittings of 32 mm. dia one approved quality brass CP pillar cock of 15 mm. dia CP chain with rubber plug of 30 mm. dia approved quality PVC waste pipe with nut 32 mm. dia 900 mm. long approved quality PVC connection pipe with heavy brass CP nut including mending good all damages and painting the brackets with two coats of approved paint.550 mm x 400 mm. size |
| 62 | Chromium plated Bib cock short body (Equivalent to code no. 511 & Model-Tropical/Sumthing Special of ESSCO or similar brand). |
| 63 | Chromium plated stop cock (Equivalent to code no. 513(A),&513(B)& Model-Tropical/Sumthing Special of ESSCO or similar brand). |
| 64 | Supplying, fitting & fixing flat back Urinal (half stall in urinal) in white vitreous chinaware of approved make supplied fitted and fixed in position with brass screw on 75 mm x 75 mm. x 75 mm. wooden blocks complete.635 mm X 395 mm X 420 mm |
| 65 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(ii) 450 mm long |
| 66 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (ii) 750 mm long |
| 67 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing). 530 mm x 410 mm |
| 68 | Supplying,fitting and fixing cast iron \"P\" or \"S\" trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). \"P\" Trap 100 mm. |
| 69 | Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).) |
| 70 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thickwith silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 71 | supplying, fitting and fixing towel rail with two brackets Aluminium 25 mm. long dia and 600 mm. long |
| 72 | Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary).(Payment to be made on area cleared) |
| 73 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the samecomplete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. For depth upto 150 metre for 80 mm dia. tube well wuth top enlargement of 150 mm dia. |
| 74 | (i) 50 mm dia. boring etc. |
| 75 | 100 mm dia. boring etc. top enlargement |
| 76 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint n any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting willbe made seperately |
| 77 | i) 100 mm |
| 78 | ii) 50 mm |
| 79 | iii) 40 mm |
| 80 | Supplying, fitting and fixing check valve (vertical) G.M. tested to 21 kg per sq. cm. (i) 50 mm |
| 81 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with \"V\" notch including hire and labour charges for all tools and plants and scaffolding as required. |
| 82 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution at work including hiore & labour charges for tools & plants and sterilizing the equipment, paying all charges charges and fees, testing etc. complete in all respect as per direction (PWD schedule Page 55 item- 23 Sanitary) |
| 83 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications 50 mm dia |
| 84 | Packing the annular space between the outside of the tube well pipes & strainers & the bore with pea size washed gravel of approved quality having size from 2mm to 5mm or the size approved by the Engineer-in-charge including cost of all materials,labour and equipment complete. Note: Initial 6 m. of Annular space between the housing pipe and the bore should not be shrouded with Pea size gravel to avoid contamination with surface water. |
| 85 | Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality |
| 86 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. 50 mm dia. |
| 87 | Supplying , fitting, fixing of Crompton greaves /Kirloskar Centrifigul Deep Well Jet Pump 02 HP (Model No. JCP12A or equivalent or above).(Rate analysis) with all complete necessary fitings for boring |
| 88 | Supplying, fitting and fixing 2.5 Sqm cable (Finolex copper cable) if required as per direction of Engineer-in- charge |
| 89 | Supplying fitting and fixing Control Panel Board with installation of electrical wire to be required for connecting pump with appliance and to make the pump serviceable by giving demostration with trial run of pump etc. all complete as per direction of Engineer-in-charge |
| 90 | Supplying, fitting and fixing gunmetal wheel valve of approved brand andmake tested to 21 kg per sq. cm. (for water lines only). (iv) 50 mm dia |
| 91 | (v) 40 mm dia |
| 92 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yieldstrength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(i) In Roof:- a) With 0.5 mm thick sheet |
| 93 | M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm). |
| 94 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite (a) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.M & joint filling using white cement slurry @ 0.20 kg/Sq.M(i) Area of each tile upto 0.09 Sq.m(i) Coloured decorative |
| 95 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite (b) WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.M & joint filling using white cement slurry @ 0.20 kg/Sq.M(i) Area of each tile upto 0.09 Sq.M(i) Coloured decorative |
| 96 | Electrical works |
| 97 | Wiring in 1.1 KV. grade single core stranded FR PVC insulated & unsheathed copper wire of 2 x 2.5 sq.mm. + 1 x 1.5 sq.mm in 25mm. PVC Casing-Capping (Precision Make) incl. necy. PVC clips fittings etc. |
| 98 | Distribution Wiring 1.1 KV. single core stranded FR PVC insulated & unsheathed copper wire in20mm. PVC rigid conduit FR incl. necy. fittings as required by 2x2.5 sq.mm. + 1x1.5 sq.mm. ECC wire from main to S.V. Lights. |
| 99 | S&F 240V. 16A 3 Pin Modular type plug socket with 16A Modular type switch, without plug top on switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu. Wire and earth continuity wire etc. |
| 100 | Fixing only Exhaust Fan after making hole in wall and making good damage and smooth cement finish etc. as practicable as possible and making connection forExhaust Fan of 23 cm. diameter. |
| 101 | S&F socket type Fan Regulator on existing Switch Board with bakelite top cover by screw after making housing for Regulator Knob by cutting bakelite top cover incl. making necy. connections etc. |
| 102 | Fixing only Ceiling Fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30cm. and making necy. connection by 2x1.5 sq.mm. (Flexible copper wire). |
| 103 | S&D 250V. A.C. ceiling Fan complete with all accessories of 1200mm. Sweep. |
| 104 | Fixing only Single/Twin fluorescent light fittings complete with all accessories directly on wall/ceiling with HW block and suitable size of M.S. fastener. |
| 105 | S&F 250V. 4 ft. long LED Tube Light fittings complete with all accessories incl. LED Tube of 22W (Philips Make) Model No. A. TMC-501P2XT-LED 22W P3242. |
| 106 | S&D of 220V. 9W LED Bulbs of Philips Make Model No. D22. |
| 107 | Any other item not covered in this schedule wiil be applicable as per P.W.D. Schedule of Rate w.e.f. 01/11/2017 & corrigendum and addendum) |
AI Tender Summary
Tender Timeline
Apr 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender