Housing Urban and Rular Development Government Departments Closing in 0 days TDR #32028971

New False Celing - Klc Iii- Assembly Building - Renovation Of Existing Ceiling At Ground Floor Near Entrace Of Assembly Building New False Celing - Klc Iii- Assembly Building - Renovation Of Existing Ceiling At Ground Floor Near Entrace Of Assembly Buildi

Issued by Government Departments · Thiruvananthapuram, Kerala
Tender Value
15.49 Lakhs
Estimated cost
Bid Submission
19 May 2022
0 days left
EMD
38728
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

New False Celing - Klc Iii- Assembly Building - Renovation Of Existing Ceiling At Ground Floor Near Entrace Of Assembly Building New False Celing - Klc Iii- Assembly Building - Renovation Of Existing Ceiling At Ground Floor Near Entrace Of Assembly Building

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 12-May-2022 Date Extention Date 19-May-2022

BOQ

Work Name:GENERAL-New False Ceiling-KLC III - Assembly Building - Renovation of existing ceiling at Ground floor near entrance of Assembly Building.-General Civil Work
Sl. No. Item Description
1False Ceiling
212.45.3:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board
314.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .
415.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge
513.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
6OD57067/2021-2022:Engaging Labour for removing the existing gypsum board ceiling ,frame work Used in the ceiling Etc complete as per the site condition and direction of Engineer in charge
750.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
810.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
9OD63674/2021-2022:providing and fixing anchor bolt10mm dia including labour charges etc complete
10OD91776/2021-2022:supplying fabricating and fixing 9mm thick plywood(BWP710Grade), fixing over theexisisting frame workusing 1mm thick mica with adhesive under the plan area of plywood surface by machine pressing etc complete as per the direction of engineer in charge
1113.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
1213.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13OD109331/2021-2022:Supplying and fixing Stainless steel Gold Strip T shaped 25mm (T25) or nearest available size approved by Architectural Engineer based on the approved drawing and as per the direction of Engineer in Charge.
14OD109333/2021-2022:Engaging labour for various petty repair works as per the direction of Engineer-in-charge
15OD109374/2021-2022:Providing and fixing18mm thick CNC cutting V board of approved design as per the approved drawing including primer, painting etc complete asper the direction of Engineer in charge.

AI Tender Summary

OUR REF NO 32028971
AUTHORITY Government Departments
TENDER VALUE 15.49 Lakhs
LAST DATE 19-05-2022
Authority
Authority Name Public Works Department
Work Description New False Celing - Klc Iii- Assembly Building - Renovation Of Existing Ceiling At Ground Floor Near Entrace Of Assembly Building New False Celing - Klc Iii- Assembly Building - Renovation Of Existing Ceiling At Ground Floor Near Entrace Of Assembly Building
Basic Detail
Tender No EB1/DB3/1145/KLCDn/2021
Bidding Type Tender
Location
City Thiruvananthapuram
State Kerala
Key Dates
Publish Date 12 May 2022
Submission Date 19 May 2022
Open Date 24 May 2022
Finance
Tender Value 15.49 Lakhs
Tender Fee 2760
EMD 38728
Exemption Not Available
Document List
86b36524-4e5a-4213-b432-bc396ea0ff1d.html
Affidavit.pdf
Bid.pdf
BOQ_701634.xls
Formoftenderr.pdf
Intaandrequa.pdf
license.pdf
Preagree.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 12, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
May 19, 2022
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
May 19, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 24, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

86b36524-4e5a-4213-b432-bc396ea0ff1d.html

pdf

Affidavit.pdf

pdf

Bid.pdf

xls

BOQ_701634.xls

pdf

Formoftenderr.pdf

pdf

Intaandrequa.pdf

pdf

license.pdf

pdf

Preagree.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender