Economic Development Corporation Limited has published Renovation / Upgradation Of Board Room At Second Floor Of Edc House, Panaji, Goa. Submission Date for this Tender is 13-05-2022. Building Repair Tenders in panaji Goa. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | DEMOLITION-:Demolition of Brick Walls/ wooden partitions/ paneling :Dismantling/Demolition of following items and carting away all the debris and disposal immediately in contractor"s own place or elsewhere at his own responsibility and cost. Care should be taken of items such as doors and its frame, light fittings, smoke devices, air conditioners and any other electrical devices and after removal they should be carefully stacked and handed over to EDC. Site should be kept clean for construction with no remains of any material from existing structure. Rates to include tools, labour, handling, storage with all leads, lifts etc. complete. |
| 2 | Wooden partitions, wooden panelling, wooden conference table, storage under windows, etc. |
| 3 | Brick walls of any thickness, wash basin counter, etc. |
| 4 | Flooring vitrified and ceramic tiles/ dado tiles, skirting, sanitary fittings, aluminium windows, etc. |
| 5 | 4 nos. of split type air conditioners with all its attached wiring, pipes, etc. to be handed over to EDC. |
| 6 | Existing doors shutters / door frames including hardware i.e. hinges, handles, door closer, etc. to be handed over to EDC. |
| 7 | Existing wiring laid onsite, switchboards, switches, light fixtures, casing pattis, conduits etc. to be handed over to EDC. |
| 8 | Existing coba waterproofing in toilets |
| 9 | Demolition of False ceiling :Dismantling and disposing of existing false ceiling in POP including its framework, light fixtures, wiring, conduit pipes, LAN cables,etc. Care should be taken of items light fittings, smoke devices and any other electrical devices and after removal they should be carefully stacked and handed over to EDC. Disposal to be done immediately and removing and carting away all the debris and disposal in contractor"s own premises or elsewhere at his own responsibility & cost. Site should be kept clean for work with no remains of any material from existing structure. Rates to include tools, labour, handling, storage with all leads, lifts etc. complete. |
| 10 | CIVIL WORK-: |
| 11 | Providing & fixing common Burnt Brick Masonry wall of 100mm thickness in cement mortar 1:4 in all walls including scafolding, labour, watering, curing, cleaning etc. complete. Cost shall include RCC band at every 4 feet intervalincludingconcreting, steel reinforcement, shuttering all etc. complete. |
| 12 | Providing & applying 12 mm thick cement Plaster in 1:4 Cement mortarto concrete or brick surfaces, in all position including scaffolding & curing, etc. complete. |
| 13 | Providing and applyinginternal putty finishing over plaster for all plain / curved surfaces of brick / RCCwalls and finishing the same in correct line, level & plumb, making of edges, corners, sill, jambs, soffits, grooves, pattasetc. & including all necessary surface preparation, scaffolding, hacking of concrete surface to receive plaster, watering, curing, cleaning etc. complete at all levels and heights. |
| 14 | Providing & applying20mm thk. Sand faced external plaster in two coats around new window openings. 1st coat of 12mm in 1:4 ratio & 2nd coat of 8mm in 1:3 ratioto concrete or brick surfaces including suitable waterproofing chemical, scaffolding, curing, finishing etc. complete. |
| 15 | Providing Plaster Of Paris punning 10-12 mm thick on existing plastered brick surfaces, including preparation of the surface, staging, etc. to achieve a smooth, even surface all complete in all position including scaffolding & curing etc. complete. |
| 16 | Providing & laying in position matt/ glazedVitrified Tiles of Kajaria / Johnson / Nitco / Asian make having size 80cm x 80cm as per the layout & colour specified by EDC including fixing with tile adhesive or on 25mm thick bed ofcement mortar 1:3 and jointed with cement slurry complete to the proper level using trowels, filing with matching colour grout, cements joints complete. (Basic Rate 1200/- Per Sq.m) |
| 17 | Providing & fixing 4"ht. skirting on walls using the same vitrified flooring tile with bed of cement mortar in the ratio 1:4 (1 cement:4coarse sand) about 50-75mm thk. Including 4/5mm thick float of cement in flush to wall & filling the joints in matching colour grout, rubbing, washing, carting away the debris out of the compound, cleaning etc. complete.(Basic Rate 1200/- Per Sq.m) |
| 18 | Providing & fixing Ceramic Tiles of Kajaria / HR Johnson / Nitco / Asian make having size 1" x 1"6" for dado as per layout & colour specified by EDC as perdrawing including fixing 1:4 Cement mortar with specified makes to the proper level, filing with matching colour grout, cement slurry cleaning, curing complete. (Basic Rate 600 /- Per Sq.m) |
| 19 | Providing and laying 19mm thk. Mirror Polished Telephonic Black Granite stone slab on window sills upto width of 3" as directed by EDC on bedding of cement mortar (1:4) with cement float, filling joints with cement slurry and base pigment & grout to match, rubbing, all exposed & sharp edges to be finely chamfered & polished cutting in shape as directed, cleaning, watering, laid to level etc., complete. |
| 20 | Providing and fixing 19mm thk. Mirror Polished Telephonic Black Granite stone for toilet door frames, in double frame on 3 sides, as directed by EDC, on bedding of cement mortar (1:4) with cement float, filling joints with cement slurry and base pigment & grout to match, rubbing, all exposed & sharp edges to be finely chamfered & polished cutting in shape as directed, cleaning, watering, laid to level etc., complete. |
| 21 | Providing & fixing Antiskid Tiles of Kajaria / HR Johnson / Nitco / Asian make having size 1" x 1"for floor as per the layout & colour specified by EDC as per including fixing with tile adhesive or 25mm thick bed ofcement mortar 1:3 and jointed with cement slurry complete to the proper level using trowels, filing with matching colour grouts, cements joints to be fixed on existing stone flooring after acid wash, removal of dirt etc. complete. (Basic Rate 600/- Per Sq.m) |
| 22 | Providing Coba water proofing treatment over for existing toilet by spreading cement slurry over the R.C.C. slab/ floor and laying of 15cms. Average laterite stone ballast coba with the necessary gradient for easy flow of water and the coba covered with damp proof of water proofing of Dr. Fixit make with jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction. The top surface shall be covered with 1:3:6 PCC finish of required thickness and finishing for laying floor tiles (the rate includes for complete items including labour and materials and including cost of initial treatment ofslab. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m. |
| 23 | Sanitary ware & Plumbing Work-: |
| 24 | Providing & fixing wall hung western commode with "P" trap of Jaquar make- "Aria" series- ARS-WHT-0110Bin ivory pastel shade as approved with standard C.I. chair bracket including soft- closing seat cover of make ZPS-WHT-1012VF, all necessary pipe connections etc. complete. |
| 25 | Proving and fixing white vitreous china water closet squating Cera make (European type w.c. pan) with seat and lid,C.P. brass hingesand rubber buffers 10 lts. Highlevel P.V.C. flushing cistern (of approved make ) with fittings, rack bolts 32 mmdiameter P.V.C.telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe withspecials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls and floors where required. |
| 26 | Providing & fixing concealed flush valve of Jaquar make- FLV-1093 as approved with installation kit & all necessary pipe connections etc. complete. |
| 27 | Providing & fixingwall hung basin of Jaquar make- Continental" series- CNS-WHT-WB04 in ivory pestel shade fixed on standard MS brackets including connection of PVC outlet pipe to the drain outletbottle trap all etc. complete |
| 28 | Providing & fixingHealth faucet of jaquar make complete with 1m long SS finish pipe, Hose & Hooks, necessary connection etc. complete. |
| 29 | Providing & fixing angular stop cock with wall flange of Jaquar make -"Florentine" series- FLR-5053N-with necessary fittings all etc. complete |
| 30 | Providing & fixing pillar cock of Jaquar make- "Florentine" series- FLR-5001B with necessary fittings connected to the inlet, for wall hung wash basins all etc. complete . |
| 31 | Providing & fixing in positionSWR nahani trap & 7" SS jali etc. complete. |
| 32 | Providing & fixing 25 mm CPVC water line including all necessary fittings like bends, elbows, PVC solutions etc. Complete |
| 33 | Providing & fixing 110 PVC line forsewage - 6kg pressure including all necessary fittings like bends, elbows, PVC solutions etc. including connection to the existing line |
| 34 | Providing & fixing 75 mm PVC line for waste water - 6 kg pressure including all necessary fittings like bends, elbows, PVC solutions etc. |
| 35 | Providing & fixing napkin holder of Jaquar make - Continental series CAN-1101N, 300 mm long in size, icnluding instalation complete with necessary hardware, cleaning etc. complete.Care should be taken of notscrewing through concealed water piping/electrical conduits while installation. |
| 36 | Providing & fixingsoap dispenser with metallic bottle of Jaquar make - Continentalseries - CAN - 1137N, including installation complete with necessary hardware, cleaning etc. complete. Care should be taken of not screwing through concealed water piping/ electrical conduits while installation. |
| 37 | Providing & fixing mirror of size 2"x2"6", with ivory powder coated frame on all four sides with all etc. complete. |
| 38 | Aluminiumworks-: |
| 39 | TWO TRACK SLIDING WINDOWS:- Providing and fixing anodized aluminium shutters including two track sliding frame, etc. with powder coating for frame of shade of approved colour on the aluminium section complete as per direction of the EDC. |
| 40 | Providing & fixing Aluminum powder coated toilet ventilator in ivory colour, with louvered panels in 5mm "Bajri" glass, all the "Jindal" make sections to be coated with 0.6m powder coating as approved, with provision of exhaust fan of size 8"x8" in the corner of the window, complete with all acessories like powder coated clips, transparent gasket, etc. |
| 41 | Providing and fixing anodized aluminium frame glass door in two shutters including floor spring etc. with powder coating for frame of shade of approved colour on the aluminium section complete as per direction of the EDC. |
| 42 | Wooden partition/ doors Work-: |
| 43 | Glazed partition: Providing & Fixing glazed partition above 3" ht. brick wall as per design of marine plywood- 1st grade box of 18mm thk. of approved specified make, of size 4" x 3", finished in 1mm thk. laminate of approved specified make, on both the sides and with clear glass of approved specified make, of 8mm thk. fixed on the plywood box, with TW beading of size 1 1/2" x 1/2" as per design finished with melamine polish. Including fixing horizontal panel of 18mm thk. marine plywoodof approved specified make finished with 1mm thk. laminate on top of 3" ht. walletc. complete. (The area for payment will be only considered below ceiling ) |
| 44 | Glazed doors: Providing & fixing glazed door of size 0.80m x 2.10m, with frame on all sides, of 18mm thk. marine plywood-1st grade of approved specified make, finished in 1mm thk. laminate, fixed with4" SS finish railway hinges & 8 mm glass of approved specified makes fixed between plywood frame with TW beading of size 1" x 1/4", finished in melamine polish, complete with door closer, lock , handles of approved specified makes etc. complete. |
| 45 | Providing & fixing 35mm solid core Flush doors with 1mm thk. Laminate on both sides of the door, of approved make & colour as specified by EDC. All edges to be covered with 12mm BTC lipping as per design & finished in french polish including surface preperation with sanding, rubbing etc., fixed on 4 nos. of railway hinges, both sides handles of crome finish, door closer of Godrej or equivalent make, fixed with SS screws & locks as approved by EDC, etc. complete. |
| 46 | Refixing existing Teakwood door frames at desired locations as per the directions of EDC. Care should be taken to avoid damage to the frames. Cost shall include any repair (changing the wooden member if required) to the existing door frame, finishing the door jambs with plaster/ POP wherever required, any miscellaneous hardware, holdfast required to fix the frames in positionincluding, beading patti of approppriate size 1 1/2" x 1/2" to level the frame to the wall etc. complete |
| 47 | Providing and fixing Conference Table of 7.5mtr (L) x 2.0 mtr (W) x 0.75 mtr (H)made out of 18mm thk. Marine plywood for top vertical supports, etc. & veneer finish/laminate/ glass for surfaces like top, sides, etc. in 2 coat PU polish and wire manager to be provided across the entire length of table with necessary power sockets, data/ voice points, etc. all complete. as per direction of EDC. |
| 48 | Providing and fixing linear workstation using 18 mm thk.Marine plywood as top & sides, 12 mm thk. Marine plywood for apronof 1" ht from top of table provided with stationery drawer of 4" ht., made out of marine plywood 18 mm thk. Plywood for fascia, 6 mm thk. plywood for base, 12 mm thk. plywood for sides, drawer fixed on telescopic channel of approved make and internally finished in 0.8 mm thk. laminate, complete with all necessary hardware like lock, channels,handles etc. complete. |
| 49 | Providing, fabricating, erecting and fixing in position Sliding door with cutout openings as per design, for side,18 mm thick marine grade plywood panel finished with laminates of approved makes and shades to both sides, 1/2" thick BTW. beading to open edges finished with melamine polish of approved shade with necessarry fittings including sliding tracks, all etc. complete as per the instructions of EDC. |
| 50 | Providing & fixing half height storage of required height and 45 mm depthusing 19mm thk. marine plywood for top, sides, front, & 6mm thk. plywood used for back, provided with 1 shelf in 19mm thk. plywood inside, storage finished in 1mm thk. laminate externally & french polish internally, complete with all necessary hardware like SS finish hinges, 4" SS handles, locks, magnet, towerbolt etc.of approved make. The front area shall be considered formeasurement purposes. |
| 51 | Providing and fixing "EDC" logo in acryllic material of size 18" L x 22" H x 1/2" thickness in blue colour (the coral draw/ adobe reader file for the logo would be provided by EDC), acryllic sheet material should be of superior quality as specified by EDCall etc. complete. |
| 52 | False Ceiling-: |
| 53 | Providing andErecting false ceiling of Mineral Fiber ceiling of Amstrong/Gyproc make -Grid False Ceiling -600X 600 ceiling- Fine Fissured with beveled Tegular with black Sillhoutte edge, main runner- 15mm x 44mm x 3600mm ceiling suspension system, Grid system- concealed T- system, cross Tees- 15mm x 44mm x 1200mm and 15mm x 44mm x 600mm- Perimeter section (wall angle)- 15mm x x 25mm x 3000mm Lay-in tile 600 x 600mm x 15mm mineral fiberboard tile of approved design & in microlook pattern complete including making necessary cut-outs for electrical fixtures, etc. as per the instructions of EDC. |
| 54 | Providing & fixing suspended false ceilingusing 12.5mm thick Gypsum boards of the specified brand and GI framework of Gyp steel or equivalent comprisingof GI perimeter channel of 22 gauge having one flange of 20mm, another of 30mm and web of 27mm fixed to brick wall partition along periphery of ceiling with screws at 610mm c/c, GI intermediate channel of size, 45mm web, two flanges each of 15mm & thickness 0.9mmsuspendedfrom the soffit / ceiling at 600mm c/ c spacing, GI ceiling sections of 0.55mm thk, Gyp boards with tapered edges to be screwed to the framework. Gyp boards are to be joined and finished so as to have a flush look which includes filling and finishing the tapered and square edge of the boards with gypsum roller net tape & approved quality joining compounds. The work also includes vertical drops, curvature, providing & making forma cutting of gyp boards & frame work and providing cutouts / openings and additional supports wherever required for the fixingof ceiling fixtures like, lights, A.C grills, sprinklers, smoke detectors etc.complete. |
| 55 | Painting-: |
| 56 | Providing & applying Plastic Premium emulsionpaint of approved make & shade as specified by EDC to old & new surfaces over one coat ofprimer and two coats of required shades, after thorough brushing/ scraping the surfaces free from mortar droppings & other foreign matter, filling cracks with "Crackseal" expansion filler, preparing the surface, all unevenness to be levelled by applying putty including scaffolding, applying primer, sand papering etc. The roller to be used in the paint application. |
| 57 | Providing & applying Textured paint of approved make &shade as per the design approved by EDC to old & new surfaces over one coat ofprimer and two coats of required shades, after thorough brushing/ scraping the surfaces free from mortar droppings & other foreign matter, filling cracks with "Crackseal" expansion filler, preparing the surface, all unevenness to be levelled by applying putty including scaffolding, applying primer, sand papering etc. |
| 58 | Providing and fixing in place roller blinds of specifiedapproved make, quality, washable fabric and colour shade and pattern of approved makeprepared by EDC.Rate shall include necessary scotch gaurd treatment on both sides complete. |
| 59 | Supply, Installation, Testing and Commissioning of minimum 3600 LUMENS Projector of ESPON make with XGA Resolution, with VGA, HDMI and USB Port for USB pen drive with necessary ceiling mounting brackets , cables, all etc. complete as per the directions of EDC. |
| 60 | Supply,Installation,Testing and Commissioning of8 ft X 6ft screen for projector with all necessary accessoriesto be mounted on the ceiling, all etc. complete as per the directions of EDC. |
| 61 | Artificial planters- Palm, etc. to be placed as instructed by EDC. |
| 62 | Supply, erection, testing & commissioning of convential smoke detector with dual chamber, solid state design, visible LED indicating lamp for operational status, mounting base etc. and connecting the same to the existing fire panel of EDC House, as per the directions of EDC all etc. complete. |
| 63 | Supply, erection, testing & commissioning of 16 watts wall mounted speakers of Bose/JBL make with all necessary wiring, connectors, etc. and connecting the to the central existing mixer and mic of EDC House, as per the directions of EDC all etc. complete. |
| 64 | Supply & testing of call bell with wireless remote of long range for the Board room all etc. complete |
| 65 | ELECTRICAL WORKS |
| 66 | CABLE & WIRING |
| 67 | Point wiring through25 mm 1.6 mm wall thick PVC Conduit with all required accessorieswith 2 Nos of 1.5 sqmm & 1 no of 2.5 sqmm ( for earth) PVC insulated CopperFRLS wires of approved specified make with Modular type switches complete with all accessories as detailed in the specifications. The switch boxes shall be flush mounted with partition works or as directed by EDC and shall be done in co-ordination with furniture works. conductor PVC insulated FRLS Wire. Conduit shall be fixed on wall / trays or ceiling with spacers & saddles. The wires will be terminated in a separate connector before fixtures. |
| 68 | Primary light points |
| 69 | Secondary light points (Loop points after primary points) |
| 70 | POWER OUTLETS |
| 71 | Supply and fixing ofmodular type shuttered power sockets, data-outlets, telephone sockets complete with chrome-plated mounting box.The switchbox shall be fixed in partition works. The rate shall be inclusive of connecting of switches / socketsof approved make. |
| 72 | 3 Nos ofsockets 6A controlled by 1nos 16A switch |
| 73 | 1 no. of socket 6A controlled by 1 no. of 6A swicth |
| 74 | 1No. of 6A Switch & socket combine in a3 module box. (for raw Power). |
| 75 | 1 Nos of sockets 16A 3pincontrolled by 16A switch Power Switch Socket combine with indicatorcomplete with G.I. mounting box for Convenience sockets. |
| 76 | Back boxes required for data voice outlets boxes |
| 77 | Supply & Laying Circuit Mains for Power sockets / DBsthrough 25mm dia1.6 mm wall thick PVC Conduit, as follows: (The rate shall include the cost of conduits & all accessories) |
| 78 | 3 Nos of 2.5 sq.mm. Cu conductor PVC insulatedFRLS for lighting from DB to all switch Boards |
| 79 | Supply and layingofPVC insulated copper conductors within conduits for workstations Power /raw power. The rate shall be inclusive of connecting of switches / sockets & workstationsFlexible PVC conduits, etc. all complete |
| 80 | 3 Nos. of 2.5 sq.mm. Cu conductor PVC insulated FRLS to all switch Board at table level. |
| 81 | 3 Nos of 4 sq.mm. Cu conductor PVC insulatedFRLS for Power point sockets.(Quote rate only) |
| 82 | LIGHT FITTINGS & FIXTURES |
| 83 | Supply, Installation, Testing& Commissioning of 2" x 2" (600 x 600mm) 38 w (system wattage) LED watt light tile with full diffuser 84% transferancy 6000k color temp and CRI >78%.The fitting shall be fixed with chain, screws, etc.The fitting shall be recessed mountedsuitable for Grid Ceiling, with full acrylic diffuser and delivered lumens > 3000 lumen , The rate shall include connection with 3 core 1.5 sqmm. flexible copper cable with Flexible Conduit. Make: Philips/ Wipro |
| 84 | Supply, Installation, Testing & Commissioning of 20 w LED Fixture of 2ft length. The rate shall include cost of tube & Connection with 3 Core 0.5sq. mm. Copper flexible cable.Fixture shall be fixed on round blocks.Make: Philips/ Wipro |
| 85 | Supply, Installation, Testing & Commissioning of LED down Lighter 15 watts system loss complete with SMPSlamp etc. LEDEYE 15wMake: Philips/ Wipro |
| 86 | Supply, Installation, Testing & commissioning of Exhaust Fan of size 200 x 200 mm approved make to the toilet block all etc. complete. |
| 87 | Supply, Installation of 25mm HMS PVC conduits of wall thickness of 2 mmthick |
| 88 | Supplying and fixing 200 mm x 200 mm x 50mm deep GI finish junction boxes. It shall have knock-outs on all sides suitable for Raceways/conduits.WithPAINTED GI Plate The knock out shall be removed at site as per requirements. |
| 89 | Refixing of existing split type air conditioners including indoor unit, outdooe unit, core cutting whereever required, water pipeline, cable wiring, with new gas copper piping, etc. complete as per the directions of EDC. |
| 90 | Refixing of existing LED fittings of 15W/20W LED eye,etc. complete as per the directions of EDC. |
| 91 | Supply, installation, testing & Commissioning of SUSPENDED LIGHT of 45 W a slimline LED fixture. The rate shall include cost of tube & Connection with 3 core 0.5 Sqm mm Cu flexible cable. Make: Philips/ Wipro. Choke: Electronic Ballast of Waslloh/ATCO make with THD. |
| 92 | NETWORKING WORKS |
| 93 | Supplying and layingofCAT-6 cable of approvedmakethrough already laid raceways/conduit from racksto work station as directed by EDC (Rate should be inclusive of sleeve of flexible conduit to be utilised at tremination end or at entry end from junction box.for Data) |
| 94 | Supplying and layingofCAT-5 cablemakethrough already laid raceways/conduit from racksto work station as directed (Rate should be inclusive of sleeve of flexible conduit to be utilised at tremination end or at entry end from junction box.For -Voice) |
| 95 | Supply of 3 feet CAT-6 patch cord of approved make for connection to the existing networking system. |
| 96 | Supply of 7 feet CAT-6 patch cord of approved make for table top |
| 97 | Supply and laying telephone cables 0.5 mm dia electrolytic tinned copper conductorsPVC insulated and twisted pair with rip cord,as follows,throughlaid PVC conduits.The rate shall include cost of the PVC conduits. 10 pair cable |
| 98 | Supply and laying maximum 15 mtr. length HDMI cable laid through SS tray for easy removal as and when required from the projector/ TV to the conference table, all etc. complete as per the directions of EDC |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
