Supplying And Installation Of Sprinkler And Smart Control Irrigation System In Nehru Park. Up-Gradation Of Major Garden Into World Class ( Smart City ) . Sub Head- Supplying And Installation Of Sprinkler And Smart Control Irrigation System In Nehru Park.
Tender Value
3.30 Crore
Estimated cost
Bid Submission
13 May 2022
0 days left
EMD
6.61 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supplying And Installation Of Sprinkler And Smart Control Irrigation System In Nehru Park. Up-Gradation Of Major Garden Into World Class ( Smart City ) . Sub Head- Supplying And Installation Of Sprinkler And Smart Control Irrigation System In Nehru Park.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-May-2022 | MINUTES OF PREBID MEETING | Technical Bid | 13-May-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 15 cm in depth but exceeding 1.50 metre in width as well as 10 square metre on plan including getting out area including disposal of excavated earth lead upto 50m and lift upto 1.50metre. All kinds of soil. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5manufactured sand derived from Recycled concrete aggregate (RCA): 10 graded stone aggregate 20 mm nominal size Recycled aggregate (RA) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (Zone-III ) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 25%) |
| 5 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.(a)Hot finished seamless type tubes |
| 6 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 7 | Providing & fixing of HDPE Main Pipe Line conforming to IS:4984, make Timetechnoplast/Supreme/Jain/Duraline or Equivalent suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer\"s instructions, including earth work in excavation and refilling (Earth work includes 450-600 mm of soil cover over the pipe). complete as per direction and entire satisfaction of engineer in charge. PIPE 160 MM PN10 PE100 |
| 8 | Providing & fixing of HDPE Main Pipe Line conforming to IS:4984, make Timetechnoplast/Supreme/Jain/Duraline or Equivalent suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer\"s instructions, including earth work in excavation and refilling (Earth work includes 450-600 mm of soil cover over the pipe). complete as per direction and entire satisfaction of engineering in charge. PIPE 110 MM PN10 PE100 |
| 9 | Providing & fixing of HDPE Main Pipe Line conforming to IS:4984, make Timetechnoplast/Supreme/Jain/Duraline or Equivalent suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer\"s instructions, including earth work in excavation and refilling (Earth work includes 450-600 mm of soil cover over the pipe). complete as per direction and entire satisfaction of engineer in charge. PIPE 75 MM PN10 PE100 |
| 10 | Providing & fixing of HDPE Lateral Pipe Line conforming to IS:4984, make Timetechnoplast/Supreme/Jain/Duraline or Equivalent suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer\"s instructions, including earth work in excavation and refilling (Earth work includes 300-450 mm of soil cover over the pipe). complete as per direction and entire satisfaction of engineering in charge. Pipe 75 MM PN06 PE100 |
| 11 | Providing & fixing of HDPE Lateral Pipe Line conforming to IS:4984, make Timetechnoplast/Supreme/Jain/Duraline or Equivalent suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer\"s instructions, including earth work in excavation and refilling (Earth work includes 300-450 mm of soil cover over the pipe). complete as per direction and entire satisfaction of engineering in charge.Pipe 63 MM PN06 PE100 |
| 12 | Providing & fixing of HDPE Lateral Pipe Line conforming to IS:4984, make Timetechnoplast/Supreme/Jain/Duraline or Equivalent suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer\"s instructions, including earth work in excavation and refilling (Earth work includes 300-450 mm of soil cover over the pipe). complete as per direction and entire satisfaction of engineering in charge. Pipe 50 MM PN06 PE100 |
| 13 | Providing & fixing of HDPE Lateral Pipe Line conforming to IS:4984, make Timetechnoplast/Supreme/Jain/Duraline or Equivalent suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer\"s instructions, including earth work in excavation and refilling (Earth work includes 300-450 mm of soil cover over the pipe). complete as per direction and entire satisfaction of engineer in charge. Pipe 40 MM PN08 PE100 |
| 14 | Cutting and filling of Trenchless trench for 40 - 160 MM Pipe. complete as per direction and entire satisfaction of engineering in charge. |
| 15 | Providing & fixing of of Sprinkler with heavy-duty commercial equipped with a standard rubber cover and offers a choice of five nozzles and geardrive with twelve fixed arcs including full circle. sprinkler should be radius of through 46 - 83 feet (14.0 - 25.0 mtr.) with 6.8 to 30.5 USGPM, full & Part in one, operating pressure 40 to 100 PSI (2.8 to 7 bar), pop-up height 5\"\"(127 mm), body height 9\"\" (220mm), body diameter 2-1/2\"\" (6.4 cm), cap diameter 3-1/4\"\"(8.3 cm), exposed diameter 1- 3/4\"\" (4.4 cm). vandal-resistant cap with locking set screw, Sprinkler should 1\" BSP female threaded inlet. Water distribution shall be via two (2) nozzles mounted in a 1-1/2\" diameter stainless-steel nozzle turret. The dual nozzles shall elevate 2-3/8\" when in operation. Trejectory is 27°, radius reduction shall be adjustable up to 25%, radius adjustment screw accessible from the top of the nozzle. The body and cap of the sprinkler shall be injection molded from ABS, a non- corrosive, impact-resistant, UV-resistant, heavy-duty plastic material. make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent,The sprinkler shall have a plastic filter screen sized to prevent entry of foreign material into the nozzle, Standard Check-O-Mastic maintains up to 4.6m (15\") along with 63 x 1\"\". complete as per direction and entire satisfaction of engineering in charge. |
| 16 | Providing & fixing of gear driven Pop up sprinkler T-5 Series and having 5\" Pop up height, The combination full- and part- circle sprinklers shall be a gear-driven rotary type and infinitely adjustable between 40 and 360 degrees. The sprinkler shall be capable of covering 7.6-15.2 meter of radius at 1.7-4.8 Bar pressure with a discharge rate of 2.8-36.5 LPM. Water distribution shall be via one nozzle insert from a nozzle tree of eight (8) standard and four (4) low angle nozzles. Radius reduction shall be adjustable up to 25% by means of a stainless steel radius adjustment screw accessible from the top of the nozzle when the sprinkler is properly installed. The body and cap of the sprinkler shall be injection-molded ABS (Acrylonitrile butadiene styrene), a heavy-duty, non-corrosive, impact and UV-resistant plastic material. make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent, The sprinkler shall have a plastic filter screen in the base of the riser that prevents the entry of foreign material into the nozzle. All components shall be removable from the top of the sprinkler case. The sprinkler shall have a single-piece riser/body seal that regulates flushing during pop up and retraction to clear any debris from around the riser; a heavy-duty stainless steel spring shall ensure positive retraction of the riser. The seal shall utilize a spring support that supports the spring and maintains positive engagement between the seal and the body. The seal shall be a single piece construction and made of injection-molded Monprene impregnated with Kemamide®. The sprinkler shall incorporate RapidSet®, an arc adjustment feature that allows the sprinkler’s arc to be set or adjusted without the need for an adjustment tool. With RapidSet, the rotor’s arc can be set by hand through a series of turns of the nozzle base. The sprinkler shall include a nozzle base slip clutch feature that enables the user to rotate the nozzle base in either direction (wet or dry) and hold in one position (during operation) for spot watering without the risk of breaking the rotor’s gears. The sprinkler shall be capable of accepting any one of twelve (12) nozzles. The eight (8) standard nozzles shall offer flow ranges of 1.5 to 8.0 gpm and shall have a trajectory of 25 degrees. The low angle nozzles shall have flow ranges of 1.0 to 3.0 gpm and shall have an approximate trajectory of 10 degrees. All nozzles shall be clearly marked just below the nozzle openings with their respective flow rate. The sprinkler shall employ a modular, interchangeable nozzle technology. Any individual nozzle shall be easily removed, installed and held in place by the stainless steel set screw located on top of the rubber cover. The standard 3.0 nozzle shall be factory installed. Rotation shall be accomplished by a water-lubricated gear drive assembly driven by a variable stator that maintains a relatively constant speed of rotation with all nozzles. The variable stator shall require no adjustments when changing nozzles. check valve shall be available with a hold back strength of 7’ of elevation change. -complete as per direction and entire satisfaction of engineering in charge. |
| 17 | Providing & fixing of LPS Series Pop up spray head having variable arc nozzle capable of covering 1.2-5.5 m at 1.4-3.5 Bars with a discharge rate of 0.04 lps to 0.24 Lps, inlet size 1/2\".The overall pop-up height shall be 4 inch. The Spray Head body, stem, nozzle and screen shall be constructed of heavy-duty, ultraviolet resistant plastic. make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent, It shall have a heavy-duty stainless steel retract spring for easy alignment of the pattern. The spray head shall have a soft elastomer pressure-activated co- molded wiper seal for cleaning debris from the pop-up stem as it retracts into the case to prevent the spray head from sticking up to minimize \"flow-by.\" The spray head shall have a Flush Plug pre-installed. The plug shall prevent debris from clogging the spray head during installation and allow for the system to be flushed before nozzling. The plug shall be bright orange in color and constructed of polypropylene material. complete as per direction and entire satisfaction of engineering in charge. |
| 18 | Providing & Fixing of 1\" Flexible swing assembly, construction of Schedule 80 pvc, Maximum operating pressure: 315 psi with 800 psi burst pressure, Cushions sprinklers from external impact 1\"\" inlet x 12\"\" lay length BSP threaded. Toro (USA) /Dura (USA) or equivalent, complete as per direction and entire satisfaction of engineering in charge. |
| 19 | Providing & Fixing of 3/4 or 1/2\" Pop up Connecting Assembly. The tubing shall be made of polyetylene having wall thickness of 2.5mm ,maximum working pressure of upto 8.3 bar. The fittings shall be made of UV resistant thermo plastic. make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equivalent, complete as per direction and entire satisfaction of engineering in charge. |
| 20 | Providing & Fixing of PP/PVC Saddle tee. The body of saddle is made of Vergin polypropylene in master batch UV stabilized ,reinforcement O- rings, galvanized nut & bolts and parallel female thread (Pressure tight). make Supreme(Italy) or equivalent, complete as per direction and entire satisfaction of engineering in charge. P.P.Saddle Tee 200,110, 75 X 2\" for lateral line valve and ARV |
| 21 | Providing & Fixing of PP/PVC Saddle tee. The body of saddle is made of Vergin polypropylene in master batch UV stabilized ,reinforcement O- rings, galvanized nut & bolts and parallel female thread (Pressure tight). make Supreme(Italy) or equivalent, complete as per direction and entire satisfaction of engineering in charge. P.P.Saddle Tee 200,110, 75X 3/4\" for QCV |
| 22 | Providing & Fixing of PP/PVC Saddle tee. The body of saddle is made of Vergin polypropylene in master batch UV stabilized ,reinforcement O- rings, galvanized nut & bolts and parallel female thread (Pressure tight). make Supreme(Italy) or equivalent, complete as per direction and entire satisfaction of engineering in charge. P.P.Saddle Tee75,63,50 ,40 X 1 , 3/4 or 1/2\"\" |
| 23 | Providing & Fixing of 3/4\" Brass Quick coupling valve having one piece solid brass construction for durability, stainless steel spring, brass valve, Drain hole in body to minimize debris collection, specially designed grommet, auto close lid when not in use, cover mode of thermo plastic elastometer .make Harit (India)/Jain(India) or equivalent, complete as per direction and entire satisfaction of engineering in charge. |
| 24 | Providing & Fixing of 3/4\" Brass Quick coupling key for durability, stainless steel spring, brass valve, Drain hole in body to minimize debris collection, specially designed grommet, auto close lid when not in use, cover mode of thermo plastic elastometer . Providing & Fixing of 3/4\" Brass Quick coupling key. make Harit (India)/Jain(India) or equivalent, complete as per direction and entire satisfaction of engineering in charge. |
| 25 | Providing & Fixing of Brass Swivel Hose Elbow 3/4x3/3\"solid brass construction for durability, stainless steel spring, brass valve, Drain hole in body to minimize debris collection, specially designed grommet, auto close lid when not in use, cover mode of thermo plastic elastometer . make Harit (India)/Jain(India) or equivalent, complete as per direction and entire satisfaction of engineering in charge. |
| 26 | Providing & Fixing of 6\" valve box with cover for Quick Coupling Valve. The valve boxes shall be heavy duty plastic with poly vinyle chloride reinforce and a green top. make Pimtas (Turkey)/Plasson/Cober or equivalent,complete as per direction and entire satisfaction of engineering in charge. |
| 27 | Providing & fixing of PVC Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem non mechanical ,with a base which permits maximum penetration into the valve. make Pimtas (Turkey) /Plasson/Cober or equivalent, complete as per direction and entire satisfaction of engineering in charge. 2\" Size PVC Ball Valve |
| 28 | Providing and fixing of Butterfly Valve PN10, slim seal wafer type valve, Body: Cast Iron to BS EN 1561 Gr. EN-JL1030, Body Liner: EPDM, Disc: Cast Iron to BS 1452 GR 250 with Nylon coating, S/S to ASTM A351 Gr CF8/CF8M, Shaft:BS 970 - 080M40 with PTFE coating, Bearings: Acetal, Standard flow control lever:SG Iron/Steel. - make Audco/Zoloto/Kranti or equivalent, complete as per direction and entire satisfaction of engineering in charge.6\" C.I. Butterfly Valve |
| 29 | Providing and fixing of Butterfly Valve PN10, slim seal wafer type valve, Body: Cast Iron to BS EN 1561 Gr. EN-JL1030, Body Liner: EPDM, Disc: Cast Iron to BS 1452 GR 250 with Nylon coating, S/S to ASTM A351 Gr CF8/CF8M, Shaft:BS 970 - 080M40 with PTFE coating, Bearings: Acetal, Standard flow control lever:SG Iron/Steel. - make Audco/Zoloto/Kranti or equivalent, complete as per direction and entire satisfaction of engineering in charge.4\" C.I. Butterfly Valve |
| 30 | Providing and fixing of Butterfly Valve PN10, slim seal wafer type valve, Body: Cast Iron to BS EN 1561 Gr. EN-JL1030, Body Liner: EPDM, Disc: Cast Iron to BS 1452 GR 250 with Nylon coating, S/S to ASTM A351 Gr CF8/CF8M, Shaft:BS 970 - 080M40 with PTFE coating, Bearings: Acetal, Standard flow control lever:SG Iron/Steel. -make Audco/Zoloto/Kranti or equivalent,complete as per direction and entire satisfaction of engineering in charge.2.5\" C.I. Butterfly Valve |
| 31 | Providing & fixing of a double acting Air release valve 2\" made of high strength aluminium / plastic with fibre glass reinforced . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 6 Bars and tesing pressure shall be 10 Bars.-make Harit/Jain (India) or equivalent, complete as per direction and entire satisfaction of engineering in charge. |
| 32 | Providing & Fixing of 10\" Round valve box with cover for Air Release Valve. The valve boxes shall be heavy duty plastic with poly vinyl chloride reinforce and a green top. make Toro (USA) / Irritrol (USA)/Dura(USA) or equivalent -complete as per direction and entire satisfaction of engineering in charge. |
| 33 | Providing & Fixing of 12\" Rectangular valve box with cover for main line and lateral line Valve. The valve boxes shall be heavy duty plastic with poly vinyle chloride reinforce and a green top. make Toro (USA) / Irritrol (USA)/Dura(USA) or equivalent -complete as per direction and entire satisfaction of engineering in charge. |
| 34 | Providing & Fixing of Pressure Guage (glycerine filled) having 2\" Dial, thread Size: 1/4\" BSP Male, Standard Version - make Filtomate /Arkal/ Amiad or equvalent, complete as per direction and entire satisfaction of engineering in charge. |
| 35 | Providing & Fixing of Automatic Screen Filter having discarge 100 m3/hr with exhaust valve, Inlet/outlet is 4\"/4\" working pressure 2 Bar or 30PSI to 8 Bar or 116 PSI, Maximum flow for flushing at 2 Bar is 15m³/hr, flushing cycle time is 10 second, exhaust valve 1.5\" or 40mm, Filtration area 750cm², Screen type Molded weave wire stainless steel 316L, Construction of material- Epoxy Coated carbon steel 37-2, Filter Lid Epoxy coated carbon steel 37-2 high density polypropylene, cleaning mechanism PVC and Stainless Steel 316L, Exhaust Valve-Brass and SS316L, BUNA-N, Seals-BUNA-N, Control-Aluminium, Brass, SS316, PVC, Acetal. with Pressure Gauge.make Filtomate /Arkal/ Amiad or equvalent, complete as per direction and entire satisfaction of engineering in charge. |
| 36 | Hydropneumatic type Pumping Unit having total discharge 21 LPS at 68 mtr. Head at Ground level, (2 working+1Standby) Each pump have discharge (10.5 Lps @ 68 Meter Head), with 1 No. of Jockey Pump having discharge 2 Lps @ 68 meter, 10.5 Lps @ 68 Mtr Head Pump = 3 Nos. 2 Lps @ 68 Mtr Head Pump = 1 Nos. complete. make ATE(Teraflow)/Lubi/Eq./KSB or equvalent, complete as per direction and entire satisfaction of engineering in charge. |
| 37 | PLC control panel with VFD , will provide low flow and pressure maintenance. This control panel should have a manuallyoperated switch for the re-prime pump. It should also have an input for the flow meter, and controls to operate theexisting auto-flush wye strainer and Filter. pressure transducer point included, sensor leads from suction header, cablesfrom panel to motors . Complete. make ATE(Teraflow)/Lubi/Eq./KSB or equvalent, complete as per direction and entire satisfaction of engineering in charge. |
| 38 | 6\"\" Delivery & Header pipe, fittings & accessories, with Non Return Valve, Isolation Butterfly Valve, Pressure Guage,pressure transducer & Water Level Controller Complete.. make Timetechnoplast/Supreme/Jain/Duraline or Equivalent , complete as per direction and entire satisfaction of engineering in charge. |
| 39 | Providing & Fixing of Solenoid Valve Heavy-duty glass-fillednylon (GFN) and stainless-steel construction Globe/Angle configuration Rated at 1034 kPa with flows from 80 to 568 LPM Water is filter controlled to resist contamination of solenoid port. Filter serviceable from top of valve Slow closing design reduces water hammer Pressure control option with compact EZReg® dial-design (serviceable under pressure — no need to shut down system) Pressure regulates in electric and manual modes Non-rising, manual flow control handle; adjustable to zero flow Manual internal bleed Rugged Santoprene, double beaded diaphragm Encapsulated injection moulded solenoid with a captive hex plunger Forward flow design for precise pressure regulation No external tubing for either electric or pressure regulating models Proven, encapsulated, injection-moulded solenoid with captured hex plunger and spring Accepts Toro and Irritrol latching solenoids Positive O-ring seal on inlet plug Unique 3-way SS bonnet screws accept Phillips or hex driver tools Solenoid: 24 V.a.c. Inrush volt-amp: 24 V.a.c. – 7.2 VA Inrush current: 0.3 Amps Holding volt-amps: 24 V.a.c. – 4.8 VA Holding current: 0.2 Amps, • Flow range: 80–568 LPM Pressure range: 140–1034 kPa Body styles: Globe/angle valve — 40 and 50mm BSP female threads. make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent, complete as per direction and entire satisfaction of engineering in charge.2\"\" Size Solenoid Valve |
| 40 | Providing & Fixing of 100 Station Decoder Controller and having following features, Maximum stations per standard system: 6400, Maximum stations per Smart Hub system: 9000, Maximum stations per output board: 800, Maximum physical wire paths per output board: 4, Maximum modules per wire path: 250, Maximum modules per output board: 500,Maximum modules per gateway or Smart Hub: 1000, Maximum modules per standard system: 4000, Maximum modules per Smart Hub system: 9000, Maximum simultaneous stations per wire path: 100, Maximum wire path distance with modules evenly spaced along its length (central controller to module): 4.2Km (13,622 ft) Maximum allowable voltage drop per physical wire path: 6 volts, Maximum wire path distance (module to solenoid): 122m (400) feet, Minimum module electrical surge rating: 20 KV, Communication cable wire size: 2.1 mm² (14 AWG), Communication Interface. The communication interface can control up to 250 modules or 800 stations per wire path. Each interface will support up to 4 wire paths. Each wire path can support 100 stations (200 solenoids) operating simultaneously. The interface will support an input voltage of 100-240 VAC, 50/60Hz, 75VA. The interface output voltage is 40 VAC. The standard interface will be connected to the PC via fiber-optic modems and fiber-optic cable. The maximum distance from the PC to the interface with the standard fiber-optic interface is 500m (1640 ft). Smart Hub interfaces can be connected to the central FIU via shielded twisted-pair communication cable up to 50,000 feet or via UHF radio up to two miles. The interface enclosure is rated IPx3 (outdoor use). The interface will be grounded, earth ground resistance to be 10 ohms or less. Modules. Supply and install Toro modules, model number DEC-ISP-1, DEC-ISP-2 or DEC-ISP-4. Modules will be epoxy potted for direct burial. The module address will be pre-programmed and permanently marked on the module case. The modules will operate 1 or 2 Toro GDC latching solenoids simultaneously per output. All stations on a module can operate simultaneously. The module to solenoid wiring should be sized for a maximum resistance of 2 ohms. make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent, complete as per direction and entire satisfaction of engineering in charge. |
| 41 | Providing & Fixing of Single Station Decoder having ISP 2 wire modules are rated at 20 KV Surge Protection, make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent,complete as per direction and entire satisfaction of engineering in charge. |
| 42 | Providing & Fixing of Line Surge Protection unit for protection of Irrigation System, make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent,complete as per direction and entire satisfaction of engineering in charge. |
| 43 | Providing & Fixing of 5/8\" x 8\" feet long Copper Clad Grounding Rod & Clamp for Decoder Controller & LSP. make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent,complete as per direction and entire satisfaction of engineering in charge. |
| 44 | Providing & Fixing of 6\" Round valve box with cover . The valve boxes shall be heavy duty plastic with poly vinyle chloride reinforce and a green top. make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent, complete as per direction and entire satisfaction of engineering in charge. |
| 45 | Providing & Fixing of DBR/Y Water Proof Wire Connector The 3M™ Direct Bury Splice Kit DBR/Y is used to electrically connect two or more pre–stripped copper wires and moisture seal the connection for direct burial. The kit includes a 3M™ Performance Plus Wire Connector R/Y+ and a high impact, UV-resistant polypropylene tube prefilled with moisture- resistant grease. Maximum Voltage Rating:600 V Application Temperature:32°F to 120°F (0°C to 49°C) Operating Temperature: -40°F to 221°F (-40°C to 105°C), Tube :Impact and UV Resistant Light Blue Polypropylene. make 3M/Toro (USA) / Irritrol (USA) or equvalent, complete as per direction and entire satisfaction of engineering in charge. |
| 46 | Providing & Fixing of 14/2 AWG Copper Conductor Direct Burial Cable, IS:8130 Class 1 & ASTM- B3 with special grade PVC Type B& UL Standard 493 and outer sheated with UV & abrasion resistant PE, Temp. Rating 10 - 75 Degree Celcious, Voltage Grade upto 600.make Macrotherm (India) or equvalent, complete as per direction and entire satisfaction of engineering in charge. |
| 47 | Providing & Fixing of 6\"\" Size Water Flow meter ,Flow meters shall be the latest “state-of-art” microprocessor based electromagnetic type, having flanged connections with integral sensor, transmitter, processor & indicator suitable for measurement of water flow. Water contains silt and sand particles. Meters shall be lined with Polyurethane (PU) liners. make Toro (USA) / Irritrol (USA) / Perrot(Germany) or equvalent, complete as per direction and entire satisfaction of engineering in charge. |
| 48 | Allowance for Maintenance of works of irrigation systems for a period of24 months after 12 months of handing over the system. The first one year maintenance after handing over the system will be maintained by the agencies free of cost, after that technical expert team will be visiting the site twice in a week complete as per direction and entire satisfaction of engineering in charge. |
AI Tender Summary
Tender Timeline
May 09, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
May 13, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 13, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 13, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender