Extension Of Control Room and Other Misc. Civil Work At 33 / 11 K.V. S / S- Mohammadpur, Azamgarh E
Tender Value
5.35 Lakhs
Estimated cost
Bid Submission
03 Jun 2022
0 days left
EMD
11000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mohammadpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Extension Of Control Room and Other Misc. Civil Work At 33 / 11 K.V. S / S- Mohammadpur, Azamgarh E
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-May-2022 | dateextend1 | Date | 20-May-2022 |
| 2 | 21-May-2022 | date extend 1 | Date | 27-May-2022 |
| 3 | 27-May-2022 | dateextend 3 | Date | 03-Jun-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and includingfilling,wateringandrammingof excavated earth into the trenches or into the space between thebuildingand sides of thefoundation work. |
| 2 | Local sand filling in plinth including supply of necessary quantity oflocal sand from outside the UPPCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. |
| 3 | Clearing jungle including uprooting of rank vegetations,grass, bush,wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. |
| 4 | Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 kmoutside UPPCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. |
| 5 | Concrete with 4cm gaugestone ballast, coarse sand (F.M. 1.8 to 2.5)&cement inproportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. |
| 6 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work. |
| 7 | Concreting of 40 mm thick RCC trench covers in mild steel framework with RCC 1:1.5:3 in Cement,Chopan coarse sand(F.M. 1.8 to 2.5) and 2cm gaugegraded hard stone ballast with 3mm thick floating coat of neatcement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. |
| 8 | RCCworkwithcementapproved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approvedhard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. |
| 9 | RCC work with cement approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. |
| 10 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sandin proportion 1:1.5:3inlighter beams i.e. having span upto6m , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . |
| 11 | RCC work with cement approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3in heavier beams i.e. having span above6m , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . |
| 12 | RCC work with cement approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. |
| 13 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sandin proportion 1:1.5:3in RCC T beam-slab and column , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . |
| 14 | First class brick (class-150) work in 1:6 cement andcoarse sand(F.M.1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work. |
| 15 | Sameasin item No. 14aboveB.W.1:6in super structure butforwallonebrick(230mm)thick |
| 16 | Same as in item No. 14 above but B.W. in 1:4 in super structures but for wall up brick (115mm) thick. |
| 17 | 2.5 cm. thick damp proof course of cement concrete consisting of 1 part cement 1.5 parts approved coarse sand (F.M.1.8 to 2.5), and3 parts approved 12 mm. graded stone grit and also including liquidwater proofing material as approved by the Engineer-Incharge in the proportions specified by the manufacturer. |
| 18 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roofworkgatesetc.wrought to requiredform including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. |
| 19 | TMT/Tor steel in plain work such as reinforced concrete orreinforcedbrickwork(when No.t included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) |
| 20 | Providing and fixing steel glazed window and ventilators ofstandard rolled Mann or Mahavir steel sections conforming to IS7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion I.E. First part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. No.minal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included). |
| 21 | Providing M.S. Frames work, rack etc for R.C.C. Trench covers and edging with M.S. angles and M.S reinforcement including cutting, bending and welding as per approved drawing. Therate is including cost of all labour, materials etc. as required for proper completion of the work. |
| 22 | Fixing and grouting of trench edging in proper level andalignment including cost of all labour, and T&P etc. required forproper completion of the work but excluding cost of C.C. (labour rates only) . |
| 23 | Supply and laying water proof craft paper in double layer with grease. including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 24 | 12mm thick plaster with cement mortar consisting of one part of cement andthree part of coarse sand (1: 3) minimum thickness No.t to be less then 10mm including supply of all material, labour and T&P etc. for proper completion of work as directed by E/I. |
| 25 | same as item No. 24 above but in proportion 1:4 cement & coarse and mortal. |
| 26 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand (1:6) ,minimum thickness No.t to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(rate including cost of cement) |
| 27 | Add for extra labour and materials for plaster over rough face of one brick thick wall. |
| 28 | Engraving lines in the plaster of the outer face wall verticallyand horizontally to display the surface as stone facing asdirected by the engineer incharge including labour and T&P etc.required for proper completion of the work (Add for extra labour and T&P etc. required for proper completion of the work (Add for extra labour to all items of plaster). |
| 29 | Providing (12x15) mm section groove in plasterincluding all material, labour andT&P etc. required for proper completion of the work. |
| 30 | Providing/making drip course (25x12)mm in 1:2 cement & coarse sand mortar to a rectangular profession 25mm wide and 12mm thick to a out side of sunsheds and projected slab pattas etc. including cost of all materials, labours and T&P \"s etc. required for proper completion of work. (including cost of cement) |
| 31 | 3mm thick floating coat of neat cement finish over roof and wall with water proofing compound including supply of all materials, labours and T&Ps etc. required for proper completion of the work as directed by E/I. |
| 32 | 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC |
| 33 | Providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& T&P etc. completion required for proper completion of work. |
| 34 | Providing and laying18mm. thickKotastonein flooring or skirtingoverbasecementmortar 1:4 mix and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete and including supply of all materials labour and T&P etc required for proper completion of the work. |
| 35 | Scrapping old white or colour wash or distemper including disposal of refuse as directed by E/I. within a distance of 60M. |
| 36 | Painting or varnishing new iron works or new wood work with one coat of ready mixed priming paint and two coat approved superior quality ready mixed paint LUXOL or equivalent brand or varnish including supply of all materials, labour and T&P etc required for proper completion of the work. |
| 37 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. |
| 38 | Painting two coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . |
| 39 | Finishing of walls with water proof exterior emulsion paintofACEofasianpaintsorequialentmake including two coats of above paint including one priming coat on already well prepared new wall surface to give an even shade including cost of all materials, labour & T&P etc. complete for proper completion of the work. |
| 40 | Providing and fixing of Dr. fixit LW+ in RCC/CC/PLASTER etc. 200ml per bag of cement as directed by E/I including supply of all material, labour and T&P etc. required for proper completion of work as directed by E/I. |
| 41 | Dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the Engineer In-charge within a distanceof 60 metres. |
| 42 | Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres. |
| 43 | Dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theEngineer-Incharge within a distance of 60 metres. |
| 44 | Dismantling doors or window leaves including stacking ofmaterials as directed by the Engineer I/C within a dist. 60 M. |
| 45 | Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M. |
| 46 | Disposal of rubbish/debris out side the UPPCL area as per direction of E/I. including cartage, labour and materials, T&P etc. required for proper completion of the work as directed by E/I. ( No. deduction for voids shall be made ) |
| 47 | Wiring point for light with 1.5sq.mm FR PVC insulated multistrand single copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper continuity wire, piaNo. type switch & ceiling rose /single/batten holder on 3mm. thick pheNo.lic laminated backelite sheet etc. complete in all respect, as directed by E/I.including matching colour wash. |
| 48 | Wiring point for fan /fresh air fan with 1.5sq.mm FR PVC insulated multistrand single copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper continuity wire, piaNo. type switch & ceiling roseon 3mm. thick pheNo.lic laminated backelite sheet etc. complete in all respect, as directed by E/I. including matching colour wash. |
| 49 | S&F hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWG MS sheetincorporating 10mm dia M.S. round bar duly bent for supporting fan hanger duly painted withred oxide and screwing arrangement with wiring conduit laid in the RCC roof before concreting along with supply of all material, labour and T&P etc. required for proper completion of the work as directed by E/I. |
| 50 | Wiring point for plug with 1.5sq.mm FR PVC insulated multistrand single copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper continuity wire, piaNo. type switch and socket etc.complete in all respect as directed by E/I. Including matching colour wash. |
| 51 | Supply and fixing of power plug with 15A/250volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mmx100mmx50mm size with pheNo.ic laminated bakelite sheet cover 3mm thick fixed with brass machinne screw and cup washer etc.required for proper completion of work as directed by E/I. |
| 52 | S/F of LED fluorescent tube light fitting make, Bajaj, Phillips etc. suitable for 1x18 watt fluorescent tube complete including tubes etc. on surface complete in all respects required for proper completion of work as directed by E/I. |
| 53 | P/F of 12 watt LED bulb of approved make Bajaj, Phillips etc.including all materials,labour T&P etc required for proper completion of work as directed by E/I. |
| 54 | Supply and fixing of high speed ceiling fan 1200mm size of USHA or any approved make by E/I. including all materials,labour T&P etc required for proper completion of work as directed by E/I. |
| 55 | Wiring point for exhaust fan with 1.5sq.mm FR PVC insulated multistrand single core copper conductor cable in PVCl conduitconcealed in the wall, complete with 14 SWG copper earth continuity wire and 15 A piaNo. type ceiling rose on 3mm thick pheNo.lic laminated backelitesheet etc. complete in all respect as directed by E/I.Includingmatching colour wash . |
| 56 | Supply and fixing of 12inch high speed exhaust fan make-USHA, havels etc or its equivalentincluding, labour, materials and T&P etc. complete in all respect as directed by E/I. |
| 57 | P/F of 63 AmpD.P. Isolater (Legrand Lexic) as per approved by E/I. Including all materials,labour T&P etc required for proper completion of work as directed by E/I. |
| 58 | Supply and fixing of electrical (porcelain) cut out 63 Amp make anchor havells etc. or its equivelant as directed by E/I. |
| 59 | S/F of MCB 6 Amp to 32Amp (Legrand Lexic) including all materials,labour T&P etc required for proper completion of work as directed by E/I. |
| 60 | S&F surface/flush mounting 12 ways SPN distribution board ( Legrand Lexic ) with additional metal door without MCB complete in all respect, as directed at site by E/I |
| 61 | supply and wiring of submain with two number 2.5 sq.mm. FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 number 1.5 sq.mm. FR PVCearth continuity wire complete in all respect including matching colour wash etc. complete in all respect. |
| 62 | Supply and wiring of submain with two number 4 sq.mm in PVC insulated 1100V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mmthick)PVC conduit concealed in wall, complete with one number 2.5 sqmm. copper cable as earth continuity wire etc. complet in all respect |
| 63 | Supply and wiring of submain with two No.. 1.5 sqmm FRLSH PVC insulated 1100 V grade multi strand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit concealed in the wall with one No.. 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuty wire including matching colour wash etc complete in all respect.. |
| 64 | S/F of 16 gauge M.S. drum duly painted included making hole in the wall for exhaust fan and finishing proporely complete in all respcet. |
| 65 | Supply and buring of safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 3000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm , outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalling conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board , cost of 25x3 G.I. Strip will beextra) |
| 66 | S/F of switch box made up to 16SWG (1.5mm) thick M.S. sheet of 100x100x65mm size duly painted with red oxide primer and flushed in wall ineluding cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed a site by the E/I. |
| 67 | Same as item No. 67 but of 150x150x65mm size |
| 68 | Same as item No. 67 but of 175x250x65mm size |
| 69 | Same as item No. 67 but of 200x250x65mm size |
| 70 | Same as item No. 67 but of 250x250x65mm size |
| 71 | Supply and fixing of water tight oblong bulkhead fitting of approved make complete with prismatic glass holder, rubber gasket, G.I. Guard etc. complete in all respect , as directed by E/I. |
| 72 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 65 and above protection complete in all respect, as directed by E/I. |
| 73 | Providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. |
| 74 | Providing and laying floor of 10 mm thick industrial tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. |
| 75 | Supply and Fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 70 to 90 Watt. Confirming to IP 65 protection complete in all respect. |
| 76 | Supply and Fixing of electronc fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. For proper completion of work to the satisfaction of Engineer in charge of work. |
| 77 | Add for light/fan points with modular type switch in place of piano type switch. |
| 78 | Add for plug points with modularswitch and socket in place of piano type switch and socket |
AI Tender Summary
Tender Timeline
May 27, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
May 20, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 27, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 03, 2022
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender