Public Works Department-PWD has published Eor To Central Jail No. 8 & 9, Tihar, New Delhi. ( Sh : Augmentation Of Materials For Pwd Punjain Cj-8 & 9 ) .- Supplying And Stacking Of Following Building Materials Of Approved Brand And Manufacture ( Bearing Isi Mark And Fullfilling Rel. Submission Date for this Tender is 05-05-2022. Coats and Jackets Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supplying and Stacking of following Building materials of approved brand and manufacture (bearing ISI Mark and fullfilling relevent standards of ISI specification) at site, samples of each and every material has to be got approved from the Engineer-in-charge in writing before bulk supply & in case of paint, OBD and similar material vouchers are also to be deposited along with material. Payment will be made only after supply of all the materials in full and good condition at once. OPC Cement |
2 | Bricks |
3 | Coarse Sand |
4 | Stone Aggregate (Single size) : 12.5 mm nominal size |
5 | Fine Sand |
6 | Oil Bound Washale Distemper/ Acrylic Distemper |
7 | Water proofing cement paint |
8 | White cement based putty |
9 | Plaster of Paris |
10 | Synthetic enamel paint in black or chocolate shade |
11 | Tarpin Oil |
12 | White Cement (Birla white/JK white) |
13 | S.C.I. Collar 100 mm dia |
14 | CI Band 100 mm |
15 | CI Tee 150 mm |
16 | CI door band 100 mm |
17 | CI door Tee 100 mm |
18 | CI P trap 110 mm |
19 | CI nani trap 100 mm |
20 | PTMT grating 100 mm dia |
21 | Gun metal gate valve 20 mm Nominal bore |
22 | Brass full way valve with C.I. wheel (screwed end) 25 mm dia |
23 | 15 mm nominal bore and 45 cm length PVC connection pipe with PTMT nuts |
24 | 15 mm nominal bore and 30 cm length PVC connection pipe with PTMT nuts |
25 | CP Brass Angle Valve 15mm |
26 | PTMT Stop Cock 15 dia |
27 | S.C. I. soil, waste and vent single socketed pipe 1.80 metres long:100 mm dia |
28 | Waste Jaali 32 mm |
29 | Rawl Plug (20 pkt) |
30 | Flushing Cistern P.V.C. 10 litre capacity ( low level ) (White) ( with fittings, accessories and flush pipe) (Hindware or as approved by the Engineer-in-Charge) |
31 | EWC |
32 | Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724 mm X 578 mm |
33 | Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia |
34 | Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia |
35 | Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia |
36 | Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia |
37 | PTMT ball cock 20 mm complete with epoxy coated aluminium rod & H.D ball |
38 | PTMT ball cock 25 mm complete with epoxy coated aluminium rod & H.D ball |
39 | Jet spray |
40 | J Hook |
41 | Acrylic Exterior Paint |
42 | PTMT Bib cock 15 mm ( Paryag ) |
43 | Tasla G.I. SWG- 16 inches size |
44 | Basuli size 800 Gm |
45 | Inchitape 5 m |
46 | Kassi |
47 | Karni big ( pan types ) 8 inches size |
48 | Chalkmitti (10 kg Packing ) |
49 | Fevicol DDL ( Pidilite ) |
50 | Stainer (Red) 200 Gms |
51 | Stainer (Green) 200 Gms |
52 | Stainer (Voilet) 200 Gms |
53 | Stainer (Blue) 200 Gms |
54 | Stainer (Orange) 200 Gms |
55 | Painting Brush 150 mm |
56 | Painting Brush 125 mm |
57 | Painting Brush 75 mm |
58 | Painting Brush 50 mm |
59 | Dhoti - 4000 x 1200 mm size |
60 | Soot Gola (Pkt of 24 Nos) |
61 | G.I. Socket 50 mm |
62 | G.I. socket 32 Nominal Bore |
63 | G.I. socket 25 Nominal Bore |
64 | G.I. socket 15 Nominal Bore |
65 | G.I. Elbow 50 nominal bore |
66 | G.I. Reducer Socket 20mm x 15mm |
67 | G.I. Reducer Socket 25mm x 15mm |
68 | G.I. Reducer Socket 25mm x 20mm |
69 | GI Nipple 15x100 mm |
70 | GI Nipple 15x150 mm |
71 | GI Nipple 15x50 mm |
72 | GI Nipple 15x230 mm |
73 | G.I. nipple 25 dia 100 mm long |
74 | Tank nipple 20 nominal bore |
75 | X- nipple 15 mm nominal bore |
76 | X- nipple 25 mm nominal bore |
77 | Iron bib cock 15 mm nominal bore |
78 | Screw driver 8 inch taparia |
79 | Pipe clip 32 mm |
80 | Pipe clip 20 mm |
81 | Pipe clip 25 mm |
82 | Water tank cover 500/1000 litters |
83 | G.I Plug 15 mm |
84 | G.I Plug 25 mm |
85 | Tank nipple 25 nominal bore |
86 | CPVC socket 20 mm |
87 | CPVC socket 25 mm |
88 | CPVC socket 32 mm |
89 | CPVC socket 40 mm |
90 | CPVC elbow 20 mm |
91 | CPVC elbow 25 mm |
92 | CPVC elbow 32 mm |
93 | CPVC elbow 40 mm |
94 | CPVC Reducer socket 32x25 mm |
95 | CPVC Reducer socket 40x32 mm |
96 | CPVC Reducer socket 32x20 mm |
97 | CPVC Reducer socket 25x20 mm |
98 | CPVC male socket 25 mm |
99 | CPVC female socket 25 mm |
100 | CPVC male socket 20 mm |
101 | CPVC male socket 15x20 mm |
102 | CPVC female socket 15x20 mm |
103 | CPVCmale elbow 25mm |
104 | CPVC female elbow 25x20mm |
105 | CPVC female elbow 15x20mm |
106 | CPVC dead plug 32mm |
107 | CPVC dead plug 25mm |
108 | CPVC dead plug 20mm |
109 | CPVC Tee 20 mm |
110 | CPVC Tee 25 mm |
111 | CPVC Tee 32 mm |
112 | CPVC Union 20 mm |
113 | CPVC Union 25 mm |
114 | CPVC Union 32 mm |
115 | CPVC gate valve 20 mm |
116 | CPVC gate valve 25 mm |
117 | CPVC gate valve 32 mm |
118 | M-seal |
119 | CPVC Solvent |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail