Annual Surfacing On Ghatasani To Bharari Road Km 0 / 0 To 5 / 0 Under Amp 2022-23 On Village Road ( Sh Providing And Laying 30 Mm Thick Bituminious Concrete In Km 0 / 0 To 2 / 0
Tender Value
31.79 Lakhs
Estimated cost
Bid Submission
04 May 2022
0 days left
EMD
64000
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dalhousie → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Surfacing On Ghatasani To Bharari Road Km 0 / 0 To 5 / 0 Under Amp 2022-23 On Village Road ( Sh Providing And Laying 30 Mm Thick Bituminious Concrete In Km 0 / 0 To 2 / 0
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.275 kg (zero point two seven five killograme) per sqm onprepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 or as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax,GST, sale tax or other taxes imposed by the Government. |
| 2 | Providing and laying 30 mm (Thirty millimetre) compacted thicknessbituminous concrete with minimum 100-120 (one hundred-one hundred twenty) TPHhot mix batch type plant with electronic controlGrading -II using crushed aggregate 13.2 (Thirteen decimal two millimeter) nominal size of specified grading premixed with bitumen binder VG-10 (Viscosity grade-ten) at the rate of 5.50. (five decimalfive ) percent of mix weight transported to site , laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth three wheel rollar 8-10 (Eight to Ten) tonne capacity for intial break down rolling and vibratory rollar 8-10 (Eight to Ten) tonne capacity or pheumatic type rollar of 12-15 ( Twelve to fifteen) tonne with type pressure of at least 0.56 MPA (Zero decimal five six) for intermidiate rolling and finished rolling with 6-8 (Six to Eight) tonne smooth wheeled tandom roller to achive the desire compactionas per MORTH specification Section No. 500 as per the direction and entire satisfaction ofEngineer-in-Charge including carrige of materials within all leads and lifts and other incidentals the rate including octori, royality, Malkana, toll tax, sale tax ,GST or other taxes imposed by the Government. |
| 3 | Providing and laying Hot plastic road marking paint of approved manufacture 2.5 mm (two decimal five millimetre) thick with reflectorising glass beeds at the rate 250(two hundred fifty gram) gram per square metre area, thickness of 2.5 mm (two point five millimetre) is exclusive of surface applied glass beeds as per specification and with strips of 0.10 ( zero decimal one) metre width in centre lines or edge lines of the road as per MORTH specification Clause No.803 or as per directions of Engineer-in-Charge, including carriageof materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality,Malkana, toll tax,GST or anyother taxes imposed by the Government. |
AI Tender Summary
Tender Timeline
Apr 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender