|
| 1 | Make/ Manufacture: AIMIL Ltd., HEICO Ltd., OR Equivalent / Superior Repute. |
| 2 | ISS SIEVE SETS (As per Specifications of IS:460)ISS GI-Frame Sieve Set. (Size 30cm dia)a) 80 mmb) 63 mmc) 45 mmd) 40 mme) 37.5 mmf)26.5 mmg) 20 mmh) 19 mmi)16 mmj)13.2 mmk) 12.5 mml)11.2 mmm)10.0 mmn) 9.5 mmo) 6.3 mmp) 5.6 mmq) 2.8 mmr) 4.75 mms) 3.35 mmt)2.36 mm(COMPLETE & OPERATIONAL IN ALL RESPECTS). |
| 3 | ISS SIEVE SETS (As per Specifications of IS:460)ISS Brass Sieves. (Size 20cm dia); Sizes (mm/micron-µ):a) 4.75 mmb) 2.36 mmc) 1.18 mm d) 0.600 mm e) 0.425 mm f) 0.300 mm g) 0.150 mm h) 0.090 mm i) 0.075 mm(COMPLETE & OPERATIONAL IN ALL RESPECTS). |
| 4 | PRECISION ELECTRONIC/DIGITALBALANCE, with dual power operation(AC/Battery) CAS: Superior Brand Precision Digital Balance (5 Kg), capable of measuring 0.5 gm to 5 Kg with permissibleerror.(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 5 | PRECISION ELECTRONIC/DIGITAL BALANCE, with dual power operation (AC/Battery) CAS: Superior Brand Precision Digital Balance (30Kg), capable of measuring 1.0 gm to 30 Kg with permissible error.(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 6 | PRECISIONINFRARED THERMOMETERDigital non-contact Infrared Thermometer (Make: Fluke), with backlight LCD Display, battery powered, with minimum operational temperature range of -20 DegreeC to 300 Degree C (or better), display resolution of at least 0.1 Degree C, suitable spectral response, Class-2 Laser power with display hold feature.(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 7 | PRECISION PROBE TYPE THERMOMETERDigital contact type Probe Thermometer (Superior Make), battery powered, with minimum operational temperature range of -50Degree C to 300Degree C (or better), display resolution of at least 0.1 DegreeC/Degree F.(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 8 | AGGREGATE IMPACT TESTING MACHINE(As per Specifications of IS:9377)Standard AggregateImpact Testing Machine for determination of Impact Value for small size mineral aggregates/rocks.COMPLETE & OPERATIONALIN ALL RESPECTS) |
| 9 | BITUMEN BINDER CENTRIFUGE EXTRACTOR(As per Relevant IS Specifications/ ASTM D 2172)Manually operated Bitumen Binder Centrifuge extractor for bituminous mix up to 1.5 Kg capacity, with hand speed control, with filter Paper Discs (Set of 500 sheets). (COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 10 | Centrifuge Extractor, Capacity 1.5 kg. Electrically OperatedRef. EN 12697-1, ASTM D 2172, AASHTO T-58, T-164For determiningbitumen percentage in Bituminous paving mixturesIt Should be compact with in-built dimmerstat for speed variation from 0 rpm to 3600 rpm. It should be supplied complete with a set of 25 Filter Paper Discs. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 11 | FIELD DENSITY TEST APPARATUSThe test apparatus must be as per IS: 2720 Part-28, used to determe in-situ dry density of natural or compacted soil containing stones, fine, medium grained soils. The apparatus consits of: 1) Sand pouring cylinder of 100 mm Dia. fitted with conical funnel and shutter of capacity 3 litre. 2) Cylindercial calibreation container 100mm IDx 150mm height.3) Metal tray size 30x30x4 cm, with 10cm fixed centre hole for cone housing. (COMPLETE & OPERATIONALIN ALL RESPECTS) |
| 12 | CONSISTENCYTEST APPARATUSThe test apparatus must be as per IS: 2720 Part-5, IS: 9259 relevant specifications, for determination of consistency (Liquid Limit) of soils by Casagrande Method. The apparatus must be manually operational, with counter, with IS/BS/ASTM Grooving Tools, Gauging Block.(COMPLETE & OPERATIONALIN ALL RESPECTS) |
| 13 | FLAKINESS APPARATUS (SHAPE TEST)As per IS Specifications/SP-36,IS:2386 (Part-1) Equipment must consist of following:Thickness Gauge manufactured from heavy gauge steel with IS-Certification Stamp. Equipment must be of Good make/manufacture and finish.(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 14 | ELONGATION APPARATUS(SHAPE TEST)Length Gauge manufactured from superior steel, mounted on a hardwood base, with IS-Certification Stamp. (COMPLETE & OPERATIONALIN ALL RESPECTS) |
| 15 | Universal Penetrometer with Penetration cone & Bitumen Penetration Kit (IS: 1448 (Part 60), ASTM: D 937, IP: 179, BS:4698, ASTM: D 217, IP: 50,ISO: 2137, EN:1426, 13179-2)Equipment must consist of following replicable partsa) Universal Penetrometer with adjustable head and display (1 No).b) Penetration cone for determination of consistency of lubricating grease and Oils (1 No).c) Bitumen Penetration kit consisting of penetration needle, copper transfer dish, aluminum containers (1 No).d) Penetration test cone for soils, with cups (1 No).COMPLETE & OPERATIONALIN ALL RESPECTS) |
| 16 | CLEVELAND Flash (Open) & Fire point Apparatus. (As per specification of IS:1448, P:69, IS: 73-2013)Equipment must be Capable for determining flash & fire point of Bitumen. The flash cup must be made of brass with insulated handle. Equipment must have a metal heating plate electrically operated with energy regulator & gas-jet assembly(COMPLETE IN ALL RESPECTS with all optional accessories). |
| 17 | THICKNESS GAUGEMS Thickness Gauge with minimum gauging depth of 1SOmm (COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 18 | HYDROMETER:As per IS Specifications/SP-36,IS:2720 (Part-4), IS:3014. (For Soils/Fines with >10% passing 75 micron sieve)Soil Hydrometer made of superior clear/transparent glass of uniform clarity throughout the upper density scale end. The density scale range must be 0.995 to 1.30 glee (g/ml) at 27°C, with leastcount of 0.0005 glee (g/ml). There shall be no abrupt changes in the cross section of the hydrometer, such as will hinder cleaning or permit air bubbles to be trapped. The hydrometer shall have maximum permissible scale error of plus/minus one scale division. (COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 19 | PYCNOMETER(As per Ref. Standard IS: 2386)(For Determination of Specific Gravity of clays, sands, and gravels of grain size <10mm.) Equipment must consist of 1-Kg/1-Liter superior glass bottles, with bored brass cone stopper, with locking ring and rubber seal.(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 20 | ELECTRIC HOT AIR OVEN (Reputed Make)Superior laboratory electric Oven, thermostatically controlled or with digital controller cum indicator with safety alarm. It must be Double Walled, with outer body made of MS Powder Coated & inner made of Stainless Steel. It must have provision for horizontal ribs for adjusting trays at any height. Equipment must have side heating/air circulating fan, to distribute the temperature range 50?C to 250?C ± 1?C, with air-ventilators. The size of oven must be 450x450x450 cm, with size tolerance ± 10mm. Equipment must operate under 220 V (±5%), 50Hz, Single Phase AC SupplyEquipment must be of Good make/manufacture and finish. (COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 21 | MOTORISED SIEVE SHAKEREquipment must consist of Motorized Sieve Shaker for sieving dry granular or powdered materials/soils. it must accommodate up to 8 sieves of 20 cm dia. the equipment must be geared motor driven of suitable HP. Direction of inclination of sieve table must change progressively in clock-wise direction, with both gyratory and tapping motion of table. Equipment must be controlled by a proper switching device with timer facility and emergency stop/start button. Equipment must run by 220 V (±5%), 50Hz, Single Phase AC Supply.(Complete and Operational in all respects) |
| 22 | 2000kN Digital Compression Testing MachineLoading range: 2000 kN (200 T) Least count: 0.1 kNMaximum clearance between platens: 370mm Maximum clearance between side platens: 340mm Platen size: 222 mm dia.Platen hardness: 612 HV (55 HRC) Piston Dia: 222.2 mmPiston stroke: 50mm Motor HP: 1Motor make: GODREJ or Crompton GreavesPower Requirement: 220 V/ 230 V, I Phase, 50 Hz, AC Supply Specimen size: 100mm, 150mm cube, 100mm & 150mm dia. cylinder Standards: IS: 516 & IS: 14858Calibration within 1% of full scale deflection with traceability to NABL. Powder coating finished surface, Front gate for protectionThe Digital Readout unit, incorporates a 4 digit display, calibrated in kN and features integral load pacing in kN/Sec.With NABL Calibration(COMPLETE & OPERATIONALIN ALL RESPECTS) |
| 23 | Slump Test ApparatusRef. Standards IS:7320, BS:1881 , ASTM C 143,AASHTOT119 (COMPLETE & OPERATIONALIN ALL RESPECTS) |
| 24 | Cube Mould, ISI Mark M. S. 150 mm cube (150mmx150mmx150mm) |
| 25 | Vicat ApparatusWith ISi Certification Mark, 15:5513The equipment consist of the following replaceable parts :Vicat Mould, Glass Base Plate, Initial Needle (in Plastic Case), Final Needle (in Plastic Case), Consistency Plunger (in Plastic Case), Mild Steel Base Plate, Vicat Mould Split Type, with Clamping Ring(COMPLETE & OPERATIONALIN ALL RESPECTS) |
| 26 | Portable Diamond CORE Drill 200mm Capacity (Make Hilti/Eibenstock) Max Core Capacity : 200mmOperation:Horizontal/VerticalShould be supplied with with 100 mm Bit (COMPLETE & OPERATIONALIN ALL RESPECTS) |
| 27 | Concrete test Hammer with NCCBM Calibrated Make:Aimil Ref. Std.: BIS 13311 -1992 (Part2) & ASTM C805, 05873The concrete test hammer is an instrument used for the non destructive testing of concrete. It allows one to have a quick estimate of the strength of concrete. Since it simply gives an indication based on surface properties.• Measuring Range 10 to 70 N/mm2• Impact energy 2.207Nm. |
| 28 | ENAMEL El-TRAYS:Sampling purpose Enamel Tray/Plates/Bucket of following minimum sizes.a) 250x300 mm Tray. |
| 29 | b) 450x600 mm Tray |
| 30 | ThermoHygrometerEnvironmentComfortDisplay:\"COMFORT\",\"WET\",\"DRY\" Temperature Range :-20 C-70°C(-4°F-158°F) Accuracy:±1 °C(1.8°F)Humidity Range:10%-99%RH Humidity Accuracy:+5% Battery:AAA 1.SV Time/Temp/Humidityindicate Temp, reading for °F & °CMAX and MIN Temperature and Humidity Memory. |
| 31 | Superior Quality Borosilicate bottles of 50ml Capacity, with capillary bored glass stopper, for determination of Specific Gravity of Soil/Bitumen/Powdersetc. |
| 32 | Measuring cyclinder for silt content test 1000 ml capacity |
| 33 | Heat Resistance safety glove |
| 34 | Natural high grade pigmented heavy duty latex hand gloves of medium size. |
| 35 | Medium size Scoop |
| 36 | Trowel |
| 37 | Superior Quality Masks. |
| 38 | Spatula. |
| 39 | Glass Beaker 1 Liter Capacity. |
| 40 | Tool Box comprising of a) screw driver set, b) Hammer set 450 - 300 grams, c) Spanner set from number 8 to 22 size) d) Pliers set |
| 41 | SS Container (1-liters) with lids |
| 42 | SS moisture containers with lids |
