Sinking Of 150Mm Dia Borewell At Bikash Bhawan Due To Re-Devlopment For Expansion Of Cuttack Netaji Bus Terminal At Cuttack.
Tender Value
4.14 Lakhs
Estimated cost
Bid Submission
10 May 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Sinking Of 150Mm Dia Borewell At Bikash Bhawan Due To Re-Devlopment For Expansion Of Cuttack Netaji Bus Terminal At Cuttack.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying all materials , labour T&P and settingof boring equipments including Errection of suitable staging for Installation of required size of required T/W , dismentalling and removing the same after completion of the said work including transportaion of the boringequipments cleaning and levelling the site properly as per requirement excavation of the mud pit, channel etc. in all respect as per the direction of the Engineering in-Charge. |
| 2 | Supplying all labour and T&P for transporting the boring pipes , PVC Pipe,Top Casing &Groutingpipesand necessary fittings, well screens, cement , Cow dung. Bentonite powder and gravell etc. fromstore to work site including loading andunloadingetc. complete in all respect as per direction ofthe Engineering in-Charge. |
| 3 | Supplying all labour and T&P for Drilling thePilot borenot less than 102mm dia without casing pipe in all kinds of soil and rocks for the following depth including the supplyingof necessary boring pipe and cutting equipments extra sockets ( whenever required ) etc. and withdrwing theboring pipes washing and keeping the the bore clear and logging if required complete in all respect as per direction ofthe Engineering in-Charge.Drilling 100mm dia of pilot borefrom 0.00mtr to 60.00mtrs. |
| 4 | Drilling 100mm dia of pilot borefrom 60.00mtr to 66.00mtrs. |
| 5 | Supplying all labour and T&P forLoweringthe 300mm dia Casing pipefitting and fixing in possition and removing the same after completion of worketc. Complete in all respect as per direction ofthe Engineering in-Charge. |
| 6 | Supplying all required labour for logging the bore through departmental logging team (till logging team arrives at the site, the contractor is to keep the bore intact by circulating mud through the mud circulating system) and when the logging team arrives at the site, the contractor will withdraw the boring pipe with cutter etc. and keep the bore suitable for loggifng and supply required labour to carry out the logging operation. |
| 7 | Supplying all labour and T&P for reaming the Pilot bore to the following sizes and depths without casing pipes including with drawing the boring pipes , washing the bore by means to pipe cylinder etc. Complete in all respect as per direction ofthe Engineering in-Charge. Reaming 100mm dia to 150mm dia ( from 0.00mtr to 360.00mtrs depth) |
| 8 | Reaming 150mm dia to 200mm dia ( from 0.00mtr to 360.00mtrs depth) |
| 9 | Reaming 200mm dia to 250mm dia ( from 0.00mtr to 360.00mtrs depth) |
| 10 | Reaming 250mm dia to 300mm dia ( from 0.00mtr to 360.00mtrs depth) |
| 11 | Supplying all labour , T&P and jointing materials andlowering the PVC Casing Pipe ,well screens, Cutter plug fitted and fixed in proper possitionand washingand cleaning the boreas per P.H. specification and direction of Engineer in-Charge. Lowering 150mm dia PVC Casing pipe (from 0mtr to 120.00 mtrs depth) |
| 12 | Collecting supplying and stacking Washed Gravelor River singles of required sizes at work sitemeasuring(1.50mx1.50mx0.50m) as one cum including all cost of conveyance ,royality,taxes etc. Complete. 3.143/4x{(0.30)2-(0.175)2m}x80.00m= 2.00 Cum |
| 13 | Supplying all labour and T&P for packing the bore with Washed Gravelor River singles of required sizes ,around well screen and pipes as per specification and direction of Engineer in-Charge. Quantity as per Item No-5 |
| 14 | Supplying all labour, tools and plant and grouting with cement slurry for sanitary sealing in the bore around the upper most 3 metres of 150 mm dia PVC casing pipe properly as per the direction of the Engineer-in-Charge. (Excluding the cost of cement) |
| 15 | Supplying all labour and T&P for washing the Tube Well with Air Compressor as perdirection of Engineer in Charge . |
| 16 | 150mm dia ASTM PVC Pipe |
| 17 | 150mm dia PVC Well Screen |
| 18 | 150mm dia ConicalPlug |
| 19 | 150mm dia Cap Plug |
| 20 | 150x300 mm PVC Short Piece |
| 21 | Bentonite Power |
| 22 | 150mm MS Top Cover |
| 23 | Supplying installation and commissioning of 1.0 HP /1.5 HP Single phase 230 Volt 50 Hz Submersible Pump Set (Max Head -65mtr ,Min Head -39mtrs) suitable for 40mm dia out let etc complet with transportation ,T&P and labour charges as per directionof the Engineering in-Charge. (Stand by One Set) |
| 24 | Supplying and fixing of control pannel suitable for 1.0HP /1.5 HP single phase 230Volts ,50 Hz. Submersible Pump Set having starting capacitor 80-100 mfd and running Capacitor 60mfd etc complete with transportation ,T&P and labpour charges as per direction of the Engineering in-Charge.(Stand by one Set) |
| 25 | Supplying and laying of 15s Sqmm PVC insulated ,PVC sheathed twin core Multistrand water proof copper flat cable (Black) etc complete with all cost transportation ,T&P charges etc as per direction ofthe Engineering in-Charge. |
| 26 | Supplying and fixing of 40mm S.D PVC Pipe etc. complete with transportation ,T&P and labour charges et completeas per direction ofthe Engineering in-Charge. |
| 27 | Supplying all materials ,labour and T&P for fitting and fixing of the following acessories as per specification and direction of the Engineer in charge.i) Water proof GI toechain rope |
| 28 | ii) Tochain Clip |
| 29 | iii) Steel Nipple |
| 30 | iv) Steel Nut & Bolt |
| 31 | v) 32mm/40mmM.S Clamp |
| 32 | vi) 32mm/40mmdia GI Elbow |
| 33 | vii) 32mm/40mmdia GI Short Piece |
| 34 | ix) Water proof Rubber,Black Tape etc |
| 35 | Supplying all materials labour and T&P for construction of brick masonary chamber of size ( 0.75 x 0.75 x 1.22 m ) as per P.H specifictionand designall complete as per the direction of the Engineer-in- charge\" |
| 36 | Supplying all materials ,labour and fabrication of MS Box for accompaning Starter main switch etc required for running the pump all complete as per direction of the Engineer in charge. |
AI Tender Summary
Tender Timeline
Apr 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 13, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender