Construction Of Sub-Centre Building At Rambha Building Work
Tender Value
22.81 Lakhs
Estimated cost
Bid Submission
07 May 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rambha → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Sub-Centre Building At Rambha Building Work
BOQ
| Sl. No. | Item Description |
| 1 | Dismentalling A.C.C/ G.C.I sheet roofing after carefully removing thenuts including stacking the materials for re-use and removing the debris with in 50m lead, including cost of all labour with T&P etc. Complete as per the direction of Engineer-in-charge. |
| 2 | Dismentalling wrought and framed timber in roof frame work in floors after careful removal of nails, bolts, etc. including stacking the materials for re-use and removing the debris with in 50m lead, including cost of all labour with T&P etc. Complete as per the direction of Engineer-in-charge. |
| 3 | Dismentalling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for re-use and removing the debris with in 50m lead including cost of all labour with T&P etc. Complete as per the direction of Engineer-in-charge. |
| 4 | Dismentalling & removing doors windows & ventilators including removal of frames, hinges, fastening & stacking the same for re-use and removing the debris with in 50m lead, including cost of all labour with T&P etc. Complete as per the direction of Engineer-in-charge. |
| 5 | Earth work in excavation of Foundation in hard soil or gravelly soil with all leads & lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site, including cost of all labour, T&P and dewatering if required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 6 | Supplying, filling sandin foundation & plinthof Structure as per drawing & Technical Specification, with sand of approved quality from approved quarry in 23.5cm (9\") thick layers including watering and ramming with cost, conveyance royalties, taxes of all the materials and labour with T&P required for the work etc. complete as per section 2100 of MORT&H specification for Road and Bridge works ( latest revision) as per drawing and Technical specification and as directed by the Engineer-in-Charge (Measurement shall be taken on finished compacted section only). |
| 7 | Cement Concrete of proportion (1:3:6) in foundation bed using 40mm size hard black crusher broken granite stonemetal of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers in required thickness to required level ramming watering curing etc. including cost, conveyance,royalty and taxes of all materials with alllabour with T&P required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 8 | Cement Concrete of proportion (1:2:4) using12 mm size hard black Crusher broken granite stone chips of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers not exceeding 15 cm (6\") thick to required level ramming watering curing etc. including cost, conveyance,royalty and taxes of all materials with alllabour with T&P required for the work etc. complete including centering and shuttering, dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 9 | RCC work of M-20 grade in the following Structural building works using 20mm to 10mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work) - Column base footing |
| 10 | Column (Ground Floor) |
| 11 | Column (Head room) |
| 12 | Plinth Bend |
| 13 | Lintel |
| 14 | Chajja |
| 15 | Beam |
| 16 | Staircase |
| 17 | Roof Slab (Ground Floor) |
| 18 | Roof Slab (Head Room) |
| 19 | Straightening cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. Rods or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (Grade Fe-500D) confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding tying the grills, hoisting, lowering and placing in proper position required for RCC works including cost, conveyance of M.S. Rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer-in-charge - Ground Floor |
| 20 | Head Room |
| 21 | Random Rubble stone masonry in cm (1:6) in foundation & plinth using gh stones of app quality, including splays, cuttings, circular moldings, watering, curing, cost, conveyance, taxes, royalties of all materials & labour with T&P etc. complete in all respect and as per the direction of Engineer-in-charge. |
| 22 | Fly ashbrick masonry in cement mortar (1:6) in foundation and plinth using bricks of “23cmx11cmx8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 23 | Head Room |
| 24 | Fly ashbrick masonry in cement mortar (1:6) in super structure using bricks of “23cmx11cmx8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. - Ground Floor |
| 25 | 20mm thick cement plaster (1:6) finished smooth to brick or stone masonry after racking out joints, including watering, curing, cost, conveyance, taxes, royalties & labour with T&P etc. Complete and as per the direction of Engineer-in-charge. |
| 26 | 12 mm (1/2\") thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 27 | Head Room |
| 28 | 16 mmthick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 29 | Head Room |
| 30 | Supplying, fitting and fixing of Anti Skid Vitrified tile in floors of pproved make conforming to IS:13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials etc. Required for the work etc. complete as per the direction of Engineer-in-charge. |
| 31 | Head Room |
| 32 | Supplying, fitting and fixing of Anti Skid Ceramic tile in floors oa pproved make conforming to IS:13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials etc. Required for the work etc. complete as per the direction of Engineer-in-charge. |
| 33 | Suppling, fitting and fixing of vetrified tile in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage of all materials, labour and T&P etc. complete as per the direction of Engineer-in-charge. |
| 34 | Head Room |
| 35 | Supplying, fitting and fixing of Ceramic tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including, cost of all materials, labour and T&P etc. complete as per the direction of Engineer-in-charge. |
| 36 | Wall priming one coat with approved wall primer etc including cost of all materials, taxes & labour with T&P etc. complete in all floors as per the direction of Engineer-in-charge. |
| 37 | Head Room |
| 38 | Painting two coats with any approved plastic emulsion paintto interior wall surface including cost of all materials and labour with T&P etc complete in all respect and as per the direction of Engineer-in-charge. |
| 39 | Head Room |
| 40 | Painting Two coat with Weather coatpaint of approved shed of approvedcolourover prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 41 | Head Room |
| 42 | Supplying of M.S. Gate, steel window and door, M.S. Window grills to openings and collapsible gate of approved specification and approved quality with cost, conveyance, royalty and taxes of all materials and all labour and T&P required for the work etc. complete as per the direction of Engineer-in-charge -Ground Floor |
| 43 | Head Room |
| 44 | Supplying, fitting, fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. c/c and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. complete as per direction of Engineer in Charge. |
| 45 | Priming one coat with any approved primer including cost of primer with cost of all labour and T&P required for the work etc. Complete as per the direction of Enginer-in-charge. |
| 46 | Head Room |
| 47 | Painting two coats with any approved enamel paint to new wood work and iron work including sand papering, polishing the surface smooth with cost, conveyance, taxes of all materials and labour with T&P required for the work as per the direction of Engineer-in-charge. |
| 48 | Head Room |
| 49 | Finishing wall surface with Acrylic wall puttyof approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour with T&P etc. complete in all floors as per the direction of Engineer-in-charge. |
| 50 | 2.5cm thick grading concrete of proportion (1:2:2) over roof slab using 12mm to 6mm size cb chips of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect and as per the direction of Engineer-in-charge. |
| 51 | Head Room |
| 52 | E.I. Work : Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 5A ,250V piano type switch ISI marked and ceiling rose ISI marked mounted on MSbox having front bakelitecover of suitable size, MSbox with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/ RHINO/Havells/V-Guard/KEI) - Group-A-L.P-7 F.P-3 C.B.P- |
| 53 | Group-B L.P-19F.P- 7 C.B.P-2 |
| 54 | Group-CL.P-3F.P- C.B.P- |
| 55 | Recessed wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked in recess 20mm dia non metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor forloop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/KEI) - Separate |
| 56 | Supply and fixing of 5Amp plugwith switch on existing board (Piano type ) |
| 57 | Supply and fixing ofmetal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing of 6pin 5/6 & 15/16Amp socket outlet and15/16Amp piano type switches connection painting etc. as required. (make-Anchor/ Cona) |
| 58 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO) - 2 X 2.5sq.mm +1 X 1.5sqmm |
| 59 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 60 | Supply and fixing of superior type call bell of ISI marked, on 6\" X4\"conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/1988 (make-Cona/Anchor) - (Ding Dong) call bell . |
| 61 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . |
| 62 | Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required - Standard earthingas per Govt. spcn. |
| 63 | S/L of 6 SWG GIwire |
| 64 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) - 2way single door |
| 65 | 4way single door |
| 66 | Supply and fixing of 5Amp to 32A rating 240V \"B\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) - Single Pole (SP) |
| 67 | 63Amp DP MCB |
| 68 | Supply and fixing ofporcelain base kit kat (Anchor/Havells) - 100 Amp Kit Kat |
| 69 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993 ) of following capacity on existing surface/wall mounting and completer with HRC fuse links, interconnections, earthing etc. as required(Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK) - 63Amp ICDP main switches with MS board |
| 70 | Supply and fixing of4pole MCCB in cubiclepannel board - 63Amp ICTPN Main switch on MS angle frame |
| 71 | Supply and fixing of copper bus bar with suitable sheet metal enclosureon MS angle frame with proper grouting on wall including all connections - 63Amp TPN bus bar-300 X 25 X 3mm size |
| 72 | Supply and fixing of different type of fitting with lamp - S/F of 20W 4\"LED fitting Surface LED Light fitting (Make-Havells/Philips/C&S/Crompton) |
| 73 | S/F of 60WLED street light fitting (Make-Havells/Philips/C&S/Crompton) |
| 74 | Supply and fixing of changeover switch (Anchor/ Havells/ Apex) - 100Amp three pole neutral |
| 75 | Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard) - S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)Crompton Grave/Khaitan/Orient/Polycab/Bajaj Rate Rs.2015.00Fixing with all materials Rs.320.00 Rs.2335.00 |
| 76 | Exhaust fan 9\" size |
| 77 | Supply of PVC Aluminium armored cables ISI marked.(Make- Glowstar/ Polycab/Nicco/KEI/RHINO as per letter No-309 19.1.2011 of SEEC (R&B) Odisha) - 10sqmm 2core |
| 78 | 16sq.mm 4core |
| 79 | Cable laying - Cable laying onwall surfacewithsteel shaddle |
| 80 | Supply and fixing of fan regulator(Cona/ Anchor/ Usha/Bajaj) - Electronics step type |
| 81 | Supply and fixing ofextra down rod - 20mm dia for 20cm x 5 |
| 82 | S/Fof B.H fitting 9watt led type complete (Bajaj/Philips with lamp |
| 83 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993 ) of following capacity on existing surface/wall mounting and completer with HRC fuse links, interconnections, earthing etc. as required(Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK) - 63Amp ICTPN Main switch on MS angle frame |
| 84 | 1 X 1.5sqmm |
| 85 | P.H. Work : Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipesconforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge - 40mm dia PVC ASTM pipe (sch-80) |
| 86 | 25mm dia PVC ASTM pipe (sch-80) |
| 87 | Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor C-pvc pipesand pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge - In ground floor - 20 mm C-PVCpipes |
| 88 | 25 mm C-PVCpipes |
| 89 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of E.I.C. - 250 mm thick wall in GF |
| 90 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge - In ground floor |
| 91 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. - In ground floor |
| 92 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge - 15mm dia Cp Long body bib cock (Plaza/Aquatic/Amber) |
| 93 | 15mm dia CP angle stop cock (Plaza/Aquatic/Amber) |
| 94 | 20 mm dia CP Concealed stop cock (Plaza/Aquatic/Amber) |
| 95 | 15mm C.P.Pillar cock(Plaza/Amber/Aquatic) |
| 96 | 40 mm dia brass or gun metal full way valve(shakti make) |
| 97 | 25mm dia brass or gun metal full way valve(shakti make) |
| 98 | 15mm dia CP Flange |
| 99 | 15mm dia CP Extention Nipple |
| 100 | 125mm CP grating |
| 101 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 2.60m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge - 2000 ltrs capacity rotational moulded polyethylene cylindrical vertical water storage tank in First floor |
| 102 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge - 110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme) |
| 103 | 75mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme) |
| 104 | 110mm U-PVCdoor Tee |
| 105 | 110mm U-PVC offset |
| 106 | 110mm U-PVCdoor bend |
| 107 | 110mm U-PVCplain shoe bend |
| 108 | 110mm U-PVC cowl |
| 109 | 110mm P-trap |
| 110 | 75mm U-PVCplain Tee |
| 111 | 75mm U-PVCplain bend |
| 112 | Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer in charge - 250mm to 375mm thick wall |
| 113 | Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge - 10 Liters capacity PVC cistern with 32mm dia flush bend(Parryware/Hindware/Neycer/Rak) |
| 114 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge - European water closet with \"p\" trap plain (Parryware/Hindware/Neycer) |
| 115 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge - 580mm size Orissa pan(Parryware/Hindware/Rak) |
| 116 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks (Plaza make)and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge - 450mmx300mm size wash hand basin |
| 117 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge - 600mmx450mm size B.E.mirror |
| 118 | Supplying all materials, labour, T&P and fixing standard size glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification anddirection of the Engineer in charge -600mmx125mm glass shelf with CP/NP guard rails |
| 119 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge - 25mmx600mm long CP towel rail |
| 120 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge - CP soap holder |
| 121 | Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge - Shutter |
| 122 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge - In Ground Floor |
| 123 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge - In Ground Floor |
| 124 | Supplying all materials, labour,T&P and providing cement concrete (1:2:4)using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete - In Ground Floor |
| 125 | Supplying all materils, labour, T&P providing ceramic tile in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement 1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer-in-charge.(30cmx30mm size)(Kajaria/Johnson/Orient Bell) - In ground floor |
| 126 | Supplying all materials, labour,T&P and providing 12mm thick cement plasster (1:4) over Brick/CC workincluding watering curring and conveyance of all materialsto site. |
| 127 | Supplying all materials, labaour, T&P and fixing porcelain glazed tiles in dados skisting on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed ith pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer-in-charge.(45cmx30cm size)(Kajaria/Johnson/Orient Bell) - In ground floor |
AI Tender Summary
Tender Timeline
Apr 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender