Construction Of Community Hall At 5 No. Line Phirpiri Dhipa ( Mujnai Tribal Co-Operative ) At Mujnai Tg In Madarihat Gp Under Madarihat-Birpara Block
Tender Value
28.72 Lakhs
Estimated cost
Bid Submission
10 May 2022
0 days left
EMD
57458
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madarihat → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Hall At 5 No. Line Phirpiri Dhipa ( Mujnai Tribal Co-Operative ) At Mujnai Tg In Madarihat Gp Under Madarihat-Birpara Block
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil bul excluding laterite or sandstone) including removing, spreadlnq or stacking the spoils within a lead of 75 m as directed. The ilem includes necessary trimming the sides of trenches, levellinS dressing and ramming the bottom, bailing out water as requrreo complete. |
| 2 | (b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. |
| 3 | Earth work in filling in foundaiion trenches or plinth with good earth,in layers not exceedjng 1500 mm. including watering and rmming etc. layer by layer complete. |
| 4 | With earth obtained by fresh excavation (including cost of excavation upto 1,800 mm. depth) from land arranged by the Deptt. within a lead of 100 m. |
| 5 | Single Brick flat soling of picked jhama bricks incluiding ramming and dressing bed to proper level |
| 6 | Cement concrete with 30 mm down graded shingles excluding shuttering. (b) 1:3:6 river bazree. (A) In Ground floor |
| 7 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer\"s specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). |
| 8 | Ordinary Cement concrete (mix 1: 1:5:3) with graded stone chips (20 mm nominal size ) cecluding shuttering and reinfor cement if any in ground floor as per relevant IS codes ii) River Bazreea) in ground floor |
| 9 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved slout props and thick hard word of approved thickness with required bracing Ior -sete slabs, beams, columns, Copings curved or straighl including fitting fixing and striking out after completioo ofworks, (upto root of ground froor) (f) 25 mm to 30 mm shuttering without staging in foundation |
| 10 | (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 11 | Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups. binders etc. including supply of rods initial straightening and removal of loose rust (if nevcessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (i) Tor steel/Mild SteelI.SAIL/TATA/RINL |
| 12 | Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth |
| 13 | 125 mm thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 14 | Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5mm (± 0.2 mm) made out of single piece extruded PVC profile, with mitred cut joint sand joint with 2 nos. of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 mm x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The doorframe to be fixed to the wall using 8 x100mm long anchor fasteners complete, all as per manufacturer?s specification and direction of Engineer -in- charge. |
| 15 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter………… |
| 16 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local. |
| 17 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. iv) 25mm thick shutters with 12mm thick panel of size 30 to 45 cm. (c) Other Local Wood. |
| 18 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (a) 200mm long |
| 19 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (i) 50mm long x 10mm dia. bolt. |
| 20 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr |
| 21 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course where necessary (ground floor). (Excluding cost of chipping) over concrete surface With 1:6 cement mortar (a) 20 mm thick plaster |
| 22 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course where necessary (ground floor). (Excluding cost of chipping) over concrete surface With 1:4 cement mortar 15 mm thick plaster |
| 23 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course where necessary (ground floor). (Excluding cost of chipping) over concrete surface With 1:4 cement mortar 10 mm thick plaster |
| 24 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. |
| 25 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. (ii) 25 mm. thick |
| 26 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specificationIn Ground floor: (iii) Two Coats |
| 27 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. Two Coats |
| 28 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film I) Natural white a) 2- track sliding window i) Bottom frame |
| 29 | ii) Top and side frame |
| 30 | d) Shutter for all track sliding window i) Bottom & Top member. |
| 31 | ii) Style side member |
| 32 | iii) Interlock member. |
| 33 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:- (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. |
| 34 | Supplying PVC rollers for sliding windows as per direction of Engineer in charge. |
| 35 | Supplying maruti lock (100mm) |
| 36 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. i) For sliding windows b) \"U\" shaped EPDM gasket for frames. |
| 37 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 iv) 5mm thick coloured / tinted / smoke glass. |
| 38 | Collapsible gate with 40mm x 40mm x 6mm Tee as top ……….. In walls, floors etc. and making good damages complete. In ground floor. |
| 39 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 40 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface : With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 41 | Making ornamental R.C. hand rail upto 160 sq.cm. cross sectional area excluding cost of reinforcement and including cost of shuttering with (1:1.5:3) cement concrete in stone chips, plastered 15 mm. thick (1:4), neat cement finishing and polishing complete as per direction of Engineer-in-charge. (Cement 10.0Kg/Mtr.) |
| 42 | Sanitary & Plumbing Works |
| 43 | Electricfication |
| 44 | add GST @ 12% |
| 45 | add CESS @ 1% |
AI Tender Summary
Tender Timeline
Apr 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 13, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender