Repair/Replacement Of Point Wiring, Sub Main Wiring, Light Fittings, Earthing, Fans, Geyser Switch Gears And Allied Works At Rangia And Changsari Military Station Under Ge Rangia Repair/Replacement Of Point Wiring, Sub Main Wiring, Light Fittings, Earthin
Tender Value
40 Lakhs
Estimated cost
Bid Submission
16 May 2022
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rangia → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair/Replacement Of Point Wiring, Sub Main Wiring, Light Fittings, Earthing, Fans, Geyser Switch Gears And Allied Works At Rangia And Changsari Military Station Under Ge Rangia Repair/Replacement Of Point Wiring, Sub Main Wiring, Light Fittings, Earthing, Fans, Geyser Switch Gears And Allied Works At Rangia And Changsari Military Station Under Ge Rangia
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully aluminum/copper point wiring (light fan, socket or power) complete incl fittings and fixtures such as switches, sockets, light fittings, ceiling rose, pendants, lamp holders, shade conical, regulators etc and separating serviceable fittings for reuse in the same work and removing unserviceable fittings and fixtures with wiring cable, battens, wooden boards etc from site and making good disturbed surfaces of walls, floors, ceilingetc all complete all as specified and directed complete all as per specified and as directed by Engineer-in-charge. |
| 2 | Taking down carefully unserviceable main switches and DB’s including wooden boards and removing from site including making good disturbed surfaces of walls complete all as per specified and as directed by Engineer-in-charge. |
| 3 | Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in casing caping of 20/25 mm size complete with sunk iron pressed steel terminal box for fitting mounting switch/ sockets regulators etc. with laminated sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light point controlled by one switch complete all as specified and as directed by Engineer-in-charge. |
| 4 | All as per serial item No. 03 above but for one ceiling fan point controlled by one switch complete all as specified and as directed by Engineer-in-charge. |
| 5 | All as per serial item No. 03 above but for one exhaust fan point controlled by one switch complete all as specified and as directed by Engineer-in-charge. |
| 6 | All as per Serial item No. 03 above but for one 3 pin socket outlet 5 AMPs on sameboard, complete all as specified and as directed by Engineer-in-charge. |
| 7 | All as per serial item No. 03 above but for 3 pin switch socket combination of 15 Amp on independent board with cable 4 sqmm unsheathed stranded 1100 Volts grade complete with 4.0 sqmm PVC insulated earth wire and connecting to earth dolly complete all as specified and as directed by Engineer-in-charge. |
| 8 | All as per Serial item No. 03 above but for one 3 pin switch socket combination of 5 AMPs on independent board, complete all as specified and as directed by Engineer-in-charge. |
| 9 | All as per serial item No. 03 above but for one bell point controlled by 5 Amps bell push, complete all as specified and as directed by Engineer-in-charge. |
| 10 | Supply and fix switch piano flush type, 6 Amps 240 volts single pole one way, complete all as specified and as directed by Engineer-in-charge. |
| 11 | Supply and fix in repair switch piano flush type, 6 Amps 240 volts single pole one way, complete all as specified and as directed by Engineer-in-charge. |
| 12 | Supply and fix bell push 5 Amp flush type single pole 230 volts one way complete all as specified and as directed by Engineer-in-charge. |
| 13 | Supply and fix in repair bell push 5 Amp flush type single pole 230 volts one way complete all as specified and as directed by Engineer-in-charge. |
| 14 | Supply and fix socketmulti purpose 2 in 1, 3 pin 5 Amp flush type complete all as specified and as directed by Engineer-in-charge. |
| 15 | Supply and fix switch socket combination multipurpose 2 in 1, 3 pin 5 Amp flush type complete all as specified and as directed by Engineer-in-charge. |
| 16 | Supply and fix in repair switch socket combination multipurpose 3 pin 5 Amp flush type complete all as specified and as directed by Engineer-in-charge. |
| 17 | Supply and fix switch socket combination multipurpose 3 pin 5/16 A Ampflush type 2 in 1 complete all as specified and as directed by Engineer-in-charge. |
| 18 | Supply and fix in repair switch socket combination multipurpose 3 pin 15 Amp and 3 pin 5 amp flush type 2 in 1 complete all as specified and as directed by Engineer-in-charge. |
| 19 | Supply and fix fan regulator electronic type, rotary step, Socket type 240 Volt, complete all as specified and as directed by Engineer-in-charge. |
| 20 | Supply and fix in repair fan regulator electronic type, rotary step, Socket type 240 Volt, complete all as specified and as directed by Engineer-in-charge. |
| 21 | Supply and fix ceiling rose surface backelite three terminal complete all as specified and as directed by Engineer-in-charge. |
| 22 | Supply and fix call bell ding dong muscial type, AC, 230 Volts, Single pole, complete all as specified and as directed by Engineer-in-charge. |
| 23 | Supply and fix in repair call bell ding dong muscial type, AC, 230 Volts, Single pole, complete all as specified and as directed by Engineer-in-charge. |
| 24 | Supply and fix in repair fan capacitor 2.5 mfd for ceiling fan including, complete all as specified and as directed by Engineer-in-charge. |
| 25 | Supply and fix sheet metal enclosure powder painted for MCB SPN 12 way DB with din rail and bus bar including making good to the disturbed surface matching with the existing complete all as specified and as directed by Engineer-in-charge. |
| 26 | All as per serial item No. 25 above but for 08 Way DB, complete all as specified and as directed by Engineer-in-charge. |
| 27 | All as per serial item No. 25 above but for 06 Way DB, complete all as specified and as directed by Engineer-in-charge. |
| 28 | All as per serial item No. 25 above but for 04 Way DB, complete all as specified and as directed by Engineer-in-charge. |
| 29 | Supply and fix MCB SPN 240 Volts 32 Amp breaking capacity 10 KA rating, complete all as specified and as directed by Engineer-in-charge. |
| 30 | Supply and fix in repair MCB SPN 240 Volts 40 to 63 Amp breaking capacity 10 KA rating, complete all as specified and as directed by Engineer-in-charge. |
| 31 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of SP 40 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and as directed by Engineer-in-charge. |
| 32 | Supply and fixing in repair 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of SP 40 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and as directed by Engineer-in-charge. |
| 33 | Supply and fix in repair sheet metal enclosure powder painted for MCB SPN 08 way DB with din rail and bus bar including making good to the disturbed surface matching with the existing complete all as specified and as directed by Engineer-in-charge. |
| 34 | All as per serial item No. 33 above but for 04 way DB, complete all as specified and as directed by Engineer-in-charge. |
| 35 | Supply and fix LED batten 4ft long, Ultra bright, glass shell, glare free, wide angle, suitable for 22W LED tube, single side connection, complete all as specified and as directed by Engineer-in-charge. |
| 36 | Supply and fix LED tube rod ultra bright glass tube capacity 22W, 230V with single side connection withwith high efficiancy, complete all as specified and as directed by Engineer-in-charge. |
| 37 | S & F LED light fitting 1x9W /1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge. |
| 38 | Supply and fix in repair LED tube rod ultra bright glass tube capacity 22W, 230V with single side connection withwith high efficiancy, complete all as specified and as directed by Engineer-in-charge. |
| 39 | Supply and fixing surface mounting slim LED flat panel 2\" x 2\" with high efficient LEDs 36 watts and glare-free opal difuser with aluminium body including taking down old unserviceable one complete all as specified and as directed by Engineer-in-charge. |
| 40 | Supply and fix in repair LED tube light fittings with regal batten for LED, wall mounted, extruded head dissipation & integrated with crystal gladd LED tube light (double/single side connection) 22 W LED 4\", 230 V complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to tube light fitting complete all as specified and as directed by Engineer-in-charge. |
| 41 | Supply and fix in repair MCB protected socket with sheet metal enclosure, 3 pin socket and one single pole MCB 20 Amp capacity,complete all as specified and as directed by Engineer-in-charge. |
| 42 | Taking down exhaust fan of any Sweep by disconnecting Electric Connection, dismantling Blades, and removing exhaust Fan to MES STORE YARD for Check-ing including refixing it to its original position, complete all as specified and as directed by Engineer-in-charge.NOTE : unserviceable Parts viz Ball Bearing, Bush, Capacitor, Blades, etc. shall be Measured and Paid separately under respective Items as mentioned here-in-after. |
| 43 | M&L for Opening Stator of Exhaust fan of 300mm sweep and Cleaning of Parts properly, replacement of unserviceable Parts as ordered, Greasing Moveable Parts, complete all as specified and as directed by Engineer-in-charge. |
| 44 | Re-winding the coil of Exhaust fan of 300 sweep with Supper Enameled Copper Wire of same Gauge and same Weight with Insulation Paper, Varnishing, ball bearing and Heating, complete all as specified and as directed by Engineer-in-charge. |
| 45 | Re-assemble the Exhaust fan of any sweep after repaired and testing, complete all as specified and as directed by Engineer-in-charge. |
| 46 | Supply only Ball Bearing as ordered suitable for exhaust fan 300mm Sweep, complete all as specified and as directed by Engineer-in-charge. |
| 47 | Supply only fan blades (Set of 3/4 blades as required at site) suitable for exhaust fan 300mm sweep, make as required at site, complete all as specified and as directed by Engineer-in-charge. |
| 48 | Supply only capacitor 4.0 MFD 440 volts AC 50Hz, as approved suitable for Exhaust fan of any sweep and Make, complete all as specified and as directed by Engineer-in-charge. |
| 49 | M&L for preparing Surfaces of exhaust fan of 300/225/450 mm sweep of any make, cleaning dust and oil using steel brush and soap water, filling cavities with Filler and applying one coat DUCCO paint with spray machine complete all as specified and as directed by Engineer-in-charge. |
| 50 | Taking down ceiling fan of any sweep and make by disconnecting electric connection, dismantling Blades, down rod and removing ceiling fan to MES STORE YARD OF AGE E/M RANGIA for checking, complete all as specified and as directed by Engineer-in-charge.NOTE : unserviceable Parts viz burnt coil, Ball Bearing, Bush, Capacitor, etc. shall be Measured and Paid separately under respective Items as mentioned here-in-after. |
| 51 | M&L for Opening stator of ceiling Fan 1200mm sweep cleaning of parts, replacement of unserviceable parts as ordered, greasing of moveable parts, complete all as specified and as directed by Engineer-in-charge. |
| 52 | M&L re-winding the coil of ceiling fan 1200 mm sweep with Supper Enameled Copper Wire of same Gauge and same Weight with Insulation Paper, Varnishing and Heating, complete all as specified and as directed by Engineer-in-charge. |
| 53 | Re-assembleingthe ceiling fan of any sweep after repaires and testing, complete all as specified and as directed by Engineer-in-charge. |
| 54 | Supply only Ball Bearing as approved suitable for Ceiling Fan of 1200 mm Sweep, complete all as specified and as directed by Engineer-in-charge. |
| 55 | Supply only fan blades (set of 3/4 blades as required at site) suitable for ceiling fan 1200 sweep of make as required/ ordered at site, complete all as specified and as directed by Engineer-in-charge. |
| 56 | Supply only capacitor 2.5 MFD 440 Volts AC 50Hz, suitable for ceiling fan of any sweep and make, complete all as specified and as directed by Engineer-in-charge. |
| 57 | Hanging only ceiling fan of any sweep and make and connecting up electric connection from ceiling Rose/connector to fan with flexible wire including replacing some minor unserviceable spares like canopy, rubber Reel, split pin, down rod etc., complete all as specified and as directed by Engineer-in-charge. |
| 58 | M&L for painting of ceiling fan of 1200 /1400 mm sweep with two coats of synthetic enamel paint over a one coat of red oxide primer after preparing the painting surface etc complete all as specified and as directed by Engineer-in-charge. |
| 59 | Taking down, vertical storage type electric water heater (geyser) of storage capacity 25/35/50 ltrs for servicing by dismantling inner tank including replacement of unserviceable thermostat, heating element & indicating lamps, pressure release valve, fiber gasket, nuts & bolts, repairs to internal wiringincluding fixing back on wall after completion of entire work complete connecting and testing complete all as specified and as directed by Engineer-in-charge.Note : The spares parts like thermostatic switch, heating element & lamps, presure release valve will be measured and paid seperately under relevant item. |
| 60 | Supply only heating element of 1.5 KW/2.00 KW including fiber washer, ISI Marked, any type, any make (Usha, Havells ,Bajaj) as per model complete all as specified and as directed by Engineer-in-charge. |
| 61 | Supply only non return valve 15 mm dia and connecting of complete, heavy duty, ISI Marked, any type complete all as specified and as directed by Engineer-in-charge. |
| 62 | Supply only safety valve/high pressure release valve, 15 mm dia heavy duty, ISI Marked, complete all as specified and as directed by Engineer-in-charge. |
| 63 | Supply only thermostatic switch, SP, 230 V,ISI Marked complete all as specified and as directed by Engineer-in-charge. |
| 64 | Supply and fixing in repairstainless steel hose connections pipe having maximun of 80 degree celcius temperature witn complete accessoriesofsize15 mm diafor hot and cold waterconnection,complete all as specified and as directed by Engineer-in-charge. |
| 65 | Supply and fix in repair lamp holder, PVC/Polycarbonate type complete all as specified and as directed by Engineer-in-charge. |
| 66 | Supply and fix 4 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including taking down old unserviceable connection, complete all as specified and as directed by Engineer-in-charge. |
| 67 | All as per serial item No. 66 as above but cable of size 06 sqmm. |
| 68 | All as per serial item No. 66 as above but cable of size 10 sqmm. |
| 69 | All as per serial item No. 66 as above but cable of size 16 sqmm. |
| 70 | Supply and fix LED bulb 15 W including taking down old unserviceable one complete all as specified and as directed by Engineer-in-charge. |
| 71 | M&L for earthing complete includingnecessaryexcavation and earth work in any type of soil with galvanized steelearth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly inground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground levelconnected to galvanised earthstrip 32x6 mm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR Part-1 connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanised iron 15 mm dia. light grade pipe and watering pipe shall be 20 mm bore medium grade PCC pipt with pre cast RCC cover, charcoal/salt funnel etc. including taking down old unserviceable one complete all as specified and as directed by Engineer-in-charge.NOTE :(i)The concrete pit shall be PCC 1:3:6 tye C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars @10 cm C/C on both sides with suitable cast iron handle shall be provided in liew of cast iron cover shown in electrical plate No.3 of MES SSR Part-1(ii)Item includes the cost of 7.5 m GI pipe for protectio of earth strip.(iii)PCC pits shall be provided atleast 500 mm away from the pit and not on the earth pipt itself and the extra cost of additional length of watering pipe, bends , elbows etc. shall be deemed to be included in the quoated rate.(iv)Item includes the cost of 7.5 mtr length earth strip. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule \"A\"/BOQ. |
AI Tender Summary
Tender Timeline
Apr 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 16, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender