Repair Replacement Of Fencing Footpath And Boundary Wall Works At Nimu Military Station Under Age(I) Nimu Repair Replacement Of Fencing Footpath And Boundary Wall Works At Nimu Military Station Under Age(I) Nimu
Tender Value
19.88 Lakhs
Estimated cost
Bid Submission
18 May 2022
0 days left
EMD
39760
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KUMBATHANG → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Replacement Of Fencing Footpath And Boundary Wall Works At Nimu Military Station Under Age(I) Nimu Repair Replacement Of Fencing Footpath And Boundary Wall Works At Nimu Military Station Under Age(I) Nimu
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-May-2022 | Other | Other | 18-May-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-Charge. |
| 2 | Supply and fixing of MS galvnised steel wire 4 mm dia of mesh 100X100 mm size or type made up into matteress or cages,lapped wired and laid in position including closing after filling including fixing to steel post by welding etc complete all as specified and directedby Engr-in-Charge.Note:- Weight of wire mess will be decided by BOO conveyed by AGE(I) Nimu |
| 3 | Fixing only chain link fencing including line wires,any mesh,size and type to any type of standards rails ,straining bolts,etc including provission of binding wire. complete all as specified and directed by Engr-in-Charge.Note:- Material shall be issued under Schedule \"B\" store of AGE(I) Nimu Store Yard. |
| 4 | Supply and fixing in repairs of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed by Engr-in-Charge.Note:- Each line wire to be measured. |
| 5 | Fixing only wire entanglements and aprons with loose, two strand, Galvanised steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed by Engr-in-Charge.Note:- Material shall be issued under Schedule \"B\" store of AGE(I) Nimu Store Yard. |
| 6 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and directed by Engr-in-Charge.(Posts embedded in natural ground) |
| 7 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonary etc. and making good disturbed ground complete all as specified and directed by Engr-in-Charge.(Posts embedded in concrete, brick work, masonary etc.) |
| 8 | Exavation in post holes in hard/dence soil (for similar holes) each n.exc 0.5 cum, getting out, returning,filling in and remming each of broken rubble mixed with earth aroundin layers not exc 25cm, watering, and removing surplus soil to a distance n.exc50m and making good surface complete all as specified and directed by Engr-in-Charge. |
| 9 | Cement concrete PCC 1:2:4 type B2 using 40mm graded crushed stone agg as in foundation/ sub base of posts complete all as specified and directed by Engr-in-Charge. |
| 10 | S&F in repairs of Mild steel work in posts and struts in fencing including cutting tops to shape as directed ,drilling holes notching for wire etc, flat iron fillets for securing wire mesh/chain link fencing /barbed wire fencingincluding all necessary welding, drilling, bolting or riveting etc and similar work and providing MS flatfor welding of GI mesh to posts or struts complete all as specified and directed by Engr-in-Charge. |
| 11 | S&F in repairs ofmild steel tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe 290 Gde-E-165 complete all as specified and directed by Engr-in-Charge. |
| 12 | Supply and fixing in repairs of mild steel round bars 10 mm dia and over,cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia ,or securing with clips of Fe-410W(Gde.E250) quality -A or Fe290(Gde-E-165) complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for prepration of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer n.exc. 10 cm width or girth complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for applying two coats of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed |
| 15 | M & L for treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and directed by Engr-in-Charge. |
| 16 | M & L for Cement Concrete , 1:2:4, type B1 using20mm graded agg as in lintel upto 1.50 m span, cills, steps, seismic and other silmilar bands, plinth courses, sring courses,lacing courses, parapets and railings upt 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troghs and the like including weathering, slightly rounded or camphered angles and throating, complete all as specified and directed by Engr-in-Charge. |
| 17 | Demolition of concrete (PCC) of any description and in any position not otherwise specifically provided for Cement concrete (unreinforced) complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for 25 mm thick Sand filling (Crushed Sand) under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for Machine pressed precast conctete interlocking paver block 60mm thick any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for chequered cement concrte tile 25x25x25mm/ 30x30x25 mm thickwith grey cement andpigment confirming jointed and pointed in neat cement slurry in floor complete all as specified and directed by Engr-in-Charge. |
| 21 | M & L 40 mm thick Cement concrete 1:2:4, type B-1 (using 20mm graded aggregate) as in topping layer finished surface even and fair complete all as specified and directed by Engr-in-Charge. |
| 22 | M & L 75mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in fdn and subbase to received top layer complete all as specified and directed by Engr-in-Charge. |
| 23 | Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc all complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate ) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4 complete all as specified and directed by Enfr-in-Charge. |
| 25 | Taking down cement plaster of any description all as specified and directed by Engr-in-charge. |
| 26 | M&L for Rendering 12mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and fair without using extra cement all as specified and directed by Engr-in-charge. |
| 27 | M&L preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer all as specified and directed by Engr-in-charge. |
| 28 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 63,824.00 and any other reduction if any from quoted amount. |
AI Tender Summary
Tender Timeline
May 09, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
May 18, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender