|
| 1 | Repairing of roof of godown with water proofing material such as tar felt / flash strips or any other water proofing material approved by the Engineer in charge. Etc. with bitumestic adhesive including replacement of bitument washer and tightening of \"J\" hooks & nuts (Details of cost for 5000 MT capacity godown) for one Season |
| 2 | Cleaning of internal drains of cross section area upto 0.25 sqm, including disposal of rubbish with all leads and lifts, outside the depot premises in the authorized dumping ground or as per directions of Engineer in charge |
| 3 | Cleaning of internal drains of cross section area above 0.25 sqm, including disposal of rubbish with all leads and lifts, outside the depot premises in the authorized dumping ground or as per directions of Engineer in charge |
| 4 | Demolishing cement concrete manually/ by mechanical means including disposal of material with 50 meter lead as per Direction of Engineering -in Charge. Nominal concrete 1:4:8 or leaner mix (I/c equivalent design) |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 6 | Providing and laying in positioncement concrete of specified gradeexcluding the cost of centering andshuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand(zone-III) derived from natural sources: 8 graded stone aggregate 40 mmnominal size derived from naturalsources) |
| 7 | Providing and fixing glass strips in joints of terrazzo/cement concert floors 50 mm wide and 4 mm thick. |
| 8 | Cement concrete flooring 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20 mmnominal size stone aggregate |
| 9 | Providing and fixing ChlorinatedPolyvinyl Chloride (CPVC) pipes,having thermal stability for hot & coldwater supply including all CPVC plain& brass threaded fittings This includesjointing of pipes & fittings with onestep CPVC solvent cement, trenching,refilling & testing of joints completeas per direction of Engineer in Charge.External work 65 mm nominal diaPipes |
| 10 | Brick work with common burnt clayF.P.S. (non modular) bricks of classdesignation 5.0 in foundation andplinth in: Cement mortar 1:6 (1cement : 6 coarse sand) |
| 11 | Providing and applying white cementbased putty of average thickness 1mm, of approved brand andmanufacturer, over the plastered wallsurface to prepare the surface evenand smooth complete. |
| 12 | Applying one coat of water thinnablecement primer of approved brandandmanufacture on wall surface : Waterthinnable cement primer |
| 13 | Distempering with 1st quality acrylicdistemper (ready mixed) having VOCcontent less than 50 gms/litre, ofapproved manufacturer, of requiredshade and colour complete, as permanufacturer\"s specification Two ormore coats on new work |
| 14 | Distempering with 1st quality acrylicdistember (Ready mix) having VOCcontent less than 50 grams/ litre ofapproved brand and manufacture togive an even shade : Old work (oneor more coats) |
| 15 | Providing and fixing 18 mm thick gangsaw cut, mirror polished, premouldedand prepolished, machine cut forkitchen platforms, vanity counters,window sills, facias and similarlocations of required size, approvedshade, colour and texture laid over 20mm thick base cement mortar 1:4 (1cement : 4 coarse sand), jointstreated with white cement, mixedwith matching pigment, epoxy touchups, including rubbing, curing,moulding and polishing to edges togive high gloss finish etc. complete atall levels. Granite stone slab colourblack, Cherry/ Ruby red Area of slabover 0.50 sqm |
| 16 | Providing and fixing P.V.C. waste pipefor sink or wash basin including P.V.C.waste fittings complete. Flexible pipe32 mm dia |
| 17 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle,Aluminium snap beading for glazing /paneling, C.P. brass / stainless steelscrews, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing,panelinganddash fasteners to be paid for separately) :For fixed portion Anodised aluminium(anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 18 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 19 | Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 20 | Providing and fixing 12 mm thick prelaminated particle board flatpressed three layer or gradedwood particle board conforming toIS: 12823 Grade l Type ll, inpanelling fixed in aluminum doors,windows shutters and partitionframes with C.P. brass / stainlesssteel screws etc. complete as perarchitectural drawings anddirections of engineer-in-charge.Pre-laminated particle board withdecorative lamination on one sideand balancing lamination on otherside |
| 21 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100 X 58 X 1.90 mm |
| 22 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm |
| 23 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, withnecessary screws etc. complete. Single rubber stopper |
| 24 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, doorweight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 25 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm |
| 26 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work |
| 27 | Supply of Skilled Labour |
| 28 | Supply of Unskilled labour |
| 29 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved byEngineer-in-charge, beyond 50 m initial lead, for all leads includingall lifts involved. |
