Construction Of Ladakh Next Gen Swan Project At Block Hqt. At Sanko Block Sankoo
Tender Value
7 Lakhs
Estimated cost
Bid Submission
04 May 2022
0 days left
EMD
14000
Bank guarantee accepted
Document Fee
70
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sankoo → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Ladakh Next Gen Swan Project At Block Hqt. At Sanko Block Sankoo
BOQ
| Sl. No. | Item Description |
| 1 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string coursed, filets, columns, pillars, piers, abutments, posts and struts, etc, up to floor five level excluding cost of centering, shuttering, finishing and reinforcement.1:2:4(1 cement:2 coarse sand:4 graded crushed stone aggregate 20mm nominal size)including all carraige from source to site of work complete job. |
| 2 | Providing Reinforcement for RCC work including straightening, bending, and cutting, placing in position and binding all complete .Hot rolled deformed bars. including all carraige from source to site of work complete |
| 3 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement motor 1:3(cement: 3 course sand) including cost of required centering shuttering and finishing smooth with 6mm thick cement plaster 1:3(1cement:3 finesand) on exposed surface complete 1:3:6(1cement:3 coarse sand :6 graded stone agg, 20mm nominal including all carraige from source to site of work complete. |
| 4 | Providing hoisting and fixing trusses/purlins/ rafters/ posts/ post plates or like components of 1st class budloo/ fir wood including cost of screws etc complete. |
| 5 | Providing and fixing corrugated G.S. sheet roofing fixed with polymer coated J or L hooks, bolts & nuts 8mm diameter with bitumen & G.I. limpet washers filled with white lead and incld. a coatof approved sheet er and two coats of approvedon over lapping of sheets complete (upto a pitch of 60 degrees), excluding. the cost of purlins, rafters & trusses 0.63mm thick with zinc coating not less than 275gm/sqm. |
| 6 | Providing and fixing plained eaves boarding of ist class Kail wood (300x40) mm nominal size including .nail complete |
| 7 | Providing wood work in frames /shutter of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia complete 2nd class kail wood. |
| 8 | Providing and fixing ornamentalShingstak (Tukulpakchay) ladakhi wood carving over Door/windows f ist class kail wood including glossy polish in sequence complete. (Design as per direction of Engineer- in-charge. |
| 9 | 20 mm thick cement plaster mix of 1:4(1cement : 4fine sand) including all carraige from source to site of work complete. |
| 10 | Providing and fixing wood work in frames of false ceiling, partition etc sawn and put up in position, !st class budloo wood. |
| 11 | Providing & fixing 12mm thick Notty Ply wood for ceiling / Wall includingIst Class Kail wood cornice and nails complete |
| 12 | Providing and fixing 05mm thick glass panes for windows including ist class kail wood beadings of required size with necessary screws and nails etc. complete |
| 13 | Providing and fixingParaquet wooden flooring (Lead made) composite sixe 16\"x48\" x12 mm thicktheemocolein including cutting placing in position all complete.(as per direction of incharge Engineer) |
| 14 | Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and incld. priming coat with cement primer. |
| 16 | Applying Priming Coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 17 | Painting with synthetic enamel p[aintof approved brand and manufacture to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand manufacture |
| 18 | Providing and fixing of 12 mm thick panelling including Vernishing/Polishing Complete job. |
| 19 | Providing and fixing of door SecurityLockfor door complete job. |
| 20 | Providing and fixing of door /windows fitting ,Aldraps ,Hings ,Handle Tower Boaldetc Complete job. |
| 21 | Wiring for light point/ fan point/ exhaust fan point/Heating Point call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.including MCB 16 Amp /6 amp,DP chang over,MCB Box , LED blub 15 Watt .(as per direction of Engineer Incharge) |
| 22 | Providing and fixing Angle Iron sing board (4-\"0\"x3\"-0\" including priming and painting photograph complete job. |
AI Tender Summary
Tender Timeline
Apr 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender