|
| 1 | Demolition of cement concrete (un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level),complete all as specified and directed. |
| 2 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed. |
| 4 | Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed. |
| 5 | Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed. |
| 6 | Materials and Labour for, broken stone or boulder hardcore of gauge exceeding 63 mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding15 cm thick, watered and rammedto a true surface , complete all as specified and directed. |
| 7 | Materials and Labour for anti termite treatment in treating the bottom and sides of excavation at the rate of 5 Litres of emulsion per square metre of surface area complete all as specified and directed. |
| 8 | Materials and Labour for anti termite treatment in treating the top surface of filled earth at the rate of 5 Litres of emulsion per square metre of surface area complete all as specified and directed. |
| 9 | Materials and labour for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed. |
| 10 | Materials and Labour for plain cement concrete (1:3:6) Type C-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 11 | Materials and Labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed. |
| 12 | Materials and Labour for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed. |
| 13 | Materials and Labour for plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed. |
| 14 | Materials and Labour for reinforced cement concrete M-25 Design Mix, using 20 mm graded aggregates in foundations; foundation beams; plinth beams; bases for columns etc.,complete all as specified and directed. |
| 15 | Materials and Labour for reinforced cement concrete M-25 Design Mix, using 20 mm graded aggregates in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 16 | Materials and Labour for reinforced cement concrete M-25 Design Mix, using 20 mm graded aggregates in beams,cantilevers,bressummers, lintels over 1.5m span,complete all as specified and directed. |
| 17 | Materials and Labour for reinforced cement concrete M-25 Design Mix, using 20 mm graded aggregates in columns, pillars, piers,posts and struts,complete all as specified and directed. |
| 18 | Materials and Labour Extra for forming fair finishing to surfaces channels/drain 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, etc complete all as specified and directed. |
| 19 | Supply only liquid water proofing compound all as specified |
| 20 | Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6),complete all as specified and directed. |
| 21 | Materials and Labour for 40mm thick damp proof inin cement concrete 1:2:4type B-0 (using 12.5 mm graded aggregate) course to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed |
| 22 | Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sided and soffits of plinth beams and similar works; vertical or to batter for rough finished surfaces of concrete, flat, complete all as specified and directed. |
| 23 | Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;exceeding 200mm thick (Horizontal or sloping)for fair finished surfaces of concrete, flat, complete all as specified and directed. |
| 24 | Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings , girders,bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete, flat, complete all as specified and directed. |
| 25 | Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchionsfor fair finished surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed. |
| 26 | Materials and Labour for, second class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue, pinned at joints, complete all as specified and directed. |
| 27 | Supply and Fix, 30 mm thick, second class hardwood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc.divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers,edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of windows, ventilators provided with stiles and rails as specified in SSR Part I Section 8, clause 8.24 (b) and fitted to chowkhats,complete all as specified and directed. |
| 28 | Supply and Fix, 35 mm thick, second class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats,complete all as specified and directed. |
| 29 | Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 100 mm long complete all as specified and directed. |
| 30 | Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 150 mm long complete all as specified and directed. |
| 31 | Supply and Fix, Aluminium Alloy, anodised, sliding door bolt, length of bolt 300 mm,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 32 | Supply and Fix, extruded aluminium alloy handles, fabricated type, anodised, 100 mm size, complete all as specified and directed. |
| 33 | Supply and Fix, extruded aluminium alloy handles, fabricated type,anodised, 150 mm size, complete all as specified and directed. |
| 34 | Supply and Fix, medium wight, cold rolled mild steel butt hinges,75 mm size,complete all as specified and directed |
| 35 | Supply and Fix, medium wight, cold rolled mild steel butt hinges,100 mm size,complete all as specified and directed |
| 36 | Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed |
| 37 | Supply and fix mild steel TMT bars 5 mm dia. and over up to and including 10 mm dia. in stirrups, spacers, binders etc. cut to length, bend to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed. |
| 38 | Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles,complete all as specified and directed. |
| 39 | treatment over smooth finished surfaces by application of cold applied bituminous primer as per manufacturer\"s instructions, providing and laying 3.00 mm thick, plain finish, APP modified bitumenous waterproofing and damp proofing membrane with polyester reinforcement (Non-Woven Polyester Mat), conforming to IS 16532 :2017 (Dimensions and weight of APP membrane polyester as per Table 2 of IS), by forced (torch on) application, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction,complete all as specified and directed. |
| 40 | Materials and Labour for 50 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded aggregates as in floor/plinth protection including finishing surface even and smooth without using extra cement,complete all as specified and directed. |
| 41 | Materials and Labour for 100 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding, complete all as specified and directed. |
| 42 | Materials and Labour for 100 mm thick plain cement concrete (1:2:4) type B2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green, complete all as specified and directed. |
| 43 | Materials and Labour for 100 mm thick plain cement concrete (1:1½:3) type A2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding, complete all as specified and directed. |
| 44 | Materials and Labour for, forming contraction (dummy)joint 65 mm deep x 10mm wide filled with sealing compound Grade ‘B’, complete all as specified and directed. |
| 45 | Materials and Labour for machine cut Kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6),complete all as specified and directed. |
| 46 | Material and Labour for rendering 5 mm thick cement plaster in cement mortar (1:3) on concrete surfaces in ceiling, complete all as specified and directed. |
| 47 | Material and Labour for rendering 5 mm thick cement plaster in cement mortar (1:3) on concrete surfaces in column,complete all as specified and directed. |
| 48 | Materials and Labour for rendering 10 mm thick, cement plaster, in cementmortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement,complete all as specified and directed. |
| 49 | Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:4) on fair faces of brick work or concrete surface in walls,complete all as specified and directed. |
| 50 | Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls,complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) |
| 51 | Materials and Labour for 10 mm thick,cement plaster/screed, in cement mortar (1:3) mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)complete all as specified and directed. |
| 52 | Materials and Labour for, 3 mm thick,sheet glass,ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane,complete all as specified and directed. |
| 53 | Material and Labour for applying three coats of white wash on new plastered surface on wall, including preparation of surfaces, complete all as specified and directed. |
| 54 | Material and Labour for applying three coats of white wash on new plastered surface in ceiling, including preparation of surfaces, complete all as specified and directed. |
| 55 | Material and Labour for preparing new surfaces plastered or unplastered on walls and applying two coats of cement based paint including priming surfaces with alkali resistant priming paint,complete all as specified and directed. |
| 56 | Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer on new or previously untreated wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed. |
| 57 | Materials and Labour for reinforced concrete pipes, 450 mm bore,Class NP3, laid and jointed,complete all as specified and directed. |
| 58 | Materials and Labour for concrete bed to drain pipes 450 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) complete all as specified and directed. |
| 59 | Materials and Labour for,150 mm spread thickness, soling (or sub base) with broker boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber ,complete all as specified and directed. |
| 60 | Materials and Labour for,150 mm thick (compacted thickness) WBM (in two layers of 75 mm thick each layer), with coarse aggregates (Type of aggregate limestone,sand stone,flint or quartzite) of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread,rolled and consolidated to gradient and camber required,complete all as specified and directed. |
| 61 | Rolling and consolidating formation surfaces in cutting with power roller exc.5 tonne and n. exc 8 tonne,complete all as specified and directed. |
| 62 | Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheetcover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one light/fan point controlled by one switch,complete all as specified and directed. |
| 63 | Materials and Labour for point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheetcover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 15 Amps socket outlet independen,complete all as specified and directed. |
| 64 | Supply and fix switch piano, flush button, single pole,one way,5 Amps,complete all as specified and directed. |
| 65 | Supply and Fix,switch socket combination 3 pin 5A/16A,5 in 1 flush type, complete all as specified and directed. |
| 66 | Supply and Fix,ceiling rose,three terminal, PVC/polycarbonate insulated body, complete all as specified and directed. |
| 67 | Supply and fixing,LED lights fitting 1x 20W, 220V,AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 68 | Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 1.50 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn into and including PVC conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 1.50 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,complete all as specified and directed. |
| 69 | Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including PVC casing and capping and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,complete all as specified and directed. |
| 70 | Supply and Fix,single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240V, complete all as specified and directed. |
| 71 | Supply and Fix, double door, sheet metal enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral,complete all as specified and directed. |
| 72 | Supply and fixing,240V,10KA \"B\" curve miniature circuit breaker (MCB) of single pole (SP) and current carrying capacity 6 to 32 amp in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 73 | Supply and fixing,240V,10KA \"C\" curve miniature circuit breaker (MCB) of single pole & neutral (SPN) and current carrying capacity32 Amp in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 74 | Supply,installation,testing and commissioning of inverter type Split AC unit 2.0 Ton capacity, indoor & outdoor units with cordless remote control for indoor unit and with in built air ioniser and plasma filter for better indoor air quality with BEE 5 star rating and EER 3.2,operated in single phase AC supply, including necessary interconnection refrigerent copper tubing of required dia. & length duly insulated,condense water PVC rigid piping not less than 19 mm external dia. and 2 mm wall thickness, outer unit stand made out of mild steel including leakage testing duly filed with CFC free refrigerant for fixing of compressor as upto the required pressure as per manufacturer\"s instructions and including necessary civil work i.e. making hole etc.,PCC work, MS stand/bracket,duly painted and connection etc.,complete all as specified and directed. Notes:-(i) AC refrigerant shall be Non CFC.(ii) Quoted rate shall be deemed to be inslusive of the cost of pipes,cables for connection of out door and indoor unit, fixing bracket for outdoor unit and nothing extra shall be admissible on this account. |
| 75 | Supply and Fix,voltage stabilizer for automatic operation, single phase, naturally air cooled designed for input voltage variation between 140V to 280V with output voltage stabilized at 230V with accuracy of + 2.5%,capacity 5 KVA, complete all as specified and directed. |
| 76 | Supply and Fix,air termination,single pointed aluminium rod 12mm dia and 300mm long,complete all as specified and directed. |
| 77 | Supply and Fix,test point terminal block made of gun metal or phosphorusbronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw,complete all as specified and directed. |
| 78 | Materials and Labour for,aluminium strip 25 x 3.15mm with saddles and fixingscrews etc. for roof conductors and down conductors above ground,complete all as specified and directed. |
| 79 | Materials and Labour for,copper strip 32 x 6mm buried in ground,complete all as specified and directed. |
| 80 | Materials and Labour for,galvanised iron strip 32 x 6mm buried in ground, complete all as specified and directed. |
| 81 | Materials and Labour for, 50 mm bore HDPE pipe,PN 10,including all fittings,laid in trenches/fixed complete to walls,ceilings or in floors etc.,complete all as specified and directed. |
| 82 | Supply,installation,testing and commissioning of,fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules,complete all as specified and directed. [Cat No. BFB6-X1F-C-S of Make L&T Electrical & Automation/Cat No FPA-1200 of Make Bosch Security Systems or equivalent Model of Make Godrej Security Solutions] |
| 83 | Supply and Fix,detectors complying with and type certified to EN - 45 addressable type multisensor detector with heat and smoke combination Photoelectric/Optical with base with self built intelligence as per IS: 11360,complete all as specified and directed.[Cat No. BFMTD-533X-S + BFUSB-501-6-S of Make L&T Electrical & Automation/Cat No FAP-OT-420 of Make Bosch Security Systems or equivalent Model of Make Godrej Security Solutions] |
| 84 | Supply and Fix,addressable manual call point resettable type,complete all as specified and directed.[Cat No. BFMCP545X-2R-S of Make L&T Electrical & Automation/Cat No FMC-210-DM-G-R of Make Bosch Security Systems or equivalent Model of Make Godrej Security Solutions] |
| 85 | Supply and Fix,Fire Alarm Sounders/Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of +5 DB 500 mtrs range,complete all as specified and directed.[Cat No. BFBX-SOL-R-S of Make L&T Electrical & Automation/Cat No FNM-420-A -RD of Make Bosch Security Systems or equivalent Model of Make Godrej Security Solutions] |
| 86 | Supply, installation, testing and commissioning of isolation transformer, indoor type, copper wound, 400 KVA capacity, input voltage 415 Volts, 3 Phase, 50 Hz, naturally oil cooled, including filling of transformer oil, suitable for 100 % Duty Cycle, able to control surge, spikes, and generate isolated neutral to protect sensitive electronic equipments and including necessary fixing of foundation bolts, nuts, washers etc. on existing platform complete all as specified and directed. |
| 87 | Supply, Installation, Testing and Commissioning of, Digital Signal Processor Based (In built Isolation Transformer & IGBT Rectifier) Online UPS system,Capacity 300 KVAfor 30 (Thirty) Minutes back up, with input nominal voltage, 380/400/415 V (Three Phase + Neutral +PE) AC,voltage range 208 - 478 Volts, AC, Frequency 40 –70 Hz,output nominal voltage, 380/400/415 Volts ± 1%, Wave Form Pure Sine Wave, Frequency 50/60 ± 0.2% Hz,with and including 04 (Four) Sets of 40 (Forty) Nos.12 Volts,160 AH capacity SMF VRLA batteries with interconnection cables, power cable and battery rack and all accessories,complete all as specified and directed. [Make (UPS): Schneider Electric/Seimens/ABB/APLAB/CONSUL; Make (Battery):\"Exide\" \"Amco\"/\"Nicco\"/ \"Amron\"] |
| 88 | Supply and Fix,moulded case circuit breakers (MCCBs),conforming to IEC 60947-2& IEC 60947-2, AC 415V, 4 pole, with current rating 630 Amps and 50 KA breaking capacity Icu at 415V, AC, 50Hz, with adjustable Over Load setting: 0.8 - 1.0 x In and adjustable Short Circuit setting:6-10 x In including provision of single door sheet metal enclosure for DBs for mounting of MCCB, complete all as specified and directed. [For MCCB: Cat No.CM94104OOT1OG of Make “L&T” or equivalent Model of Make Siemens/ Legrand/Schneider/ABB; For Sheet Metal Enclosure: Cat No. IHELFP “Havells” or equivalent Model of Make L&T/Siemens/ Legrand/ Schneider/ ABB] |
| 89 | Supply,laying,jointing and testing of,LT power cable with stranded copper conductor,185 Sqmm,single core, XLPE insulated, PVC inner sheathed, unarmoured, extruded PVC Type ST2 outer sheathed,1100 V Grade conforming to IS 7098 (Part 1) 1988,complete all as specified. ,complete all as specified and directed. |
| 90 | Supply installation, testing and commissioning of wall mounted LT Panel Board, AC 415 V, 50 Hz, 3 Phase, 4 Wire,of size 1000 mm (H) X 1000mm (W) X 500 mm (D), suitable for accommodating the accessories, totally enclosed self-supporting structure/cubicle, fully compartmentalized type, dust and vermin proof, protection IP-52, suitable for indoor use, double hinged doors at front with suitablelocking arrangement and suitable lifting lugs 02(Two) Nos on top; Provision of louvers at sides ; Bottom cable entry with detachable gland plate with galvanised steel nut bolts,double compression copper stainless steel gland for incoming and outgoing cable; Structure made out of 2.00 mm thick CRCA steel sheets with angle iron framework; Structure treated under 8-Tank metaltreatment process and duly powder coated ; with suitable mounting arrangement for all the accessories, pre wired with suitable size of copper conductor connection for all switchgear and meters, including jointing materials, aluminium lugs for cables with and including 01 (One) No.Four pole power contactors conforming to IS / IEC 60947-4-1 & IEC 60947-4-1,Type MCX 47,AC-1 rating 1000 Amps,auxillary contacts 2 NO + 2 NC all as per Cat No.850645 \"Opticon Indoasian\" of Make “Indoasian” or equivalent Model of Make L&T/Siemens/ Schneider/ ABB,complete all as specified and directed. |
| 91 | Supply installation, testing and commissioning of wall mounted LT Panel Board, AC 415 V, 50 Hz, 3 Phase, 4 Wire,of size 1000 mm (H) X 1000mm (W) X 500 mm (D), suitable for accommodating the accessories, totally enclosed self-supporting structure/cubicle, fully compartmentalized type, dust and vermin proof, protection IP-52, suitable for indoor use, double hinged doors at front with suitablelocking arrangement and suitable lifting lugs 02(Two) Nos on top; Provision of louvers at sides ; Bottom cable entry with detachable gland plate with galvanised steel nut bolts,double compression copper stainless steel gland for incoming and outgoing cable; Structure made out of 2.00 mm thick CRCA steel sheets with angle iron framework; Structure treated under 8-Tank metaltreatment process and duly powder coated ; with suitable mounting arrangement for all the accessories, pre wired with suitable size of copper conductor connection for all switchgear and meters, including jointing materials, aluminium lugs for cables with and including 01 (One) No. Automatic Transfer Switch with controller,4 Pole,rated current 1000 Amps,delayed transition – open style, Level 2 DIP controls I-O-II –operation with stable OFF position between positions I and II with handle for manual operation, 2 m RJ45 connection cable between detachable HMI and ATS frame all as per Type OXB1000E3S2QB Order No 1SCA153577R1001 \" of Make “ABB”/ Cat No.H03ATSC31000KG00 ofMake Schneider or equivalent Model of Make L&T/ Siemens,complete all as specified and directed. |
| 92 | Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth lead wire 4 mm dia. by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil completeall as specified and indicatedon electrical plate No 3 of SSR Part –I (2009) including testing on completion. |
| 93 | Materials and Labour for earthing complete with copper earth plate electrode 600 mm x 600 mm x 3.15 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to copper earth lead strip 20 mm x 3 mm by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 25 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil completeall as specified and indicatedon electrical plate No 3 of SSR Part –I (2009) including testing on completion. |
| 94 | Materials and Labour for earthing complete using pipe-in-pipe technology with 02 (Two) mild steel pipes one inside the other, 3.00 Metres long, zinc coated, filled with high conductive and corrosion resistance crystalline mixture all as per Model No. ‘ASEEL-39’ of Make ‘Ashlok’ or equivalent Model of Make ‘ McML Protection Technologies Private Limited’/’ Ennov Infra Solutions Pvt. Ltd.’, lowered directly in ground into bore hole, vertically to a depth not less than 3.40 meter deep below ground level with top edge earth electrode at a depth not less than 0.40M below normal ground level, connected to copper earth lead strip, 20 mm X 3 mmby means of bolts, nuts check nuts and washers of copper and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, 25 mm bore galvanized steel tubing light grade for protection of earth lead connection, provision of backfill compound of not less than 75 Kilograms, around the earth electrode for artificial treatment to soil so as to achieve earth resistance below 2 Ohms, and including necessary testing complete all as specified and directed.Notes: -(i) Copies of CPRI Type test certificates for the earthing system issued to the manufacturer shall be produced by the contractor.(ii)The concrete pit shall be provided all as shown on electrical plate No 3 of SSR Part –I (2009) , except the RCC cover which shall be as specified here in before. |
| 95 | Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) |
