Balance Work Forconstruction Of Toilet Block At Take Off Site At Billing. ( Sh: Construction Of Civil Work
Tender Value
6.14 Lakhs
Estimated cost
Bid Submission
05 May 2022
0 days left
EMD
12300
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baijnath → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Balance Work Forconstruction Of Toilet Block At Take Off Site At Billing. ( Sh: Construction Of Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m one point five in width or 10ten Per Square Meter on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m one point five , including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m (fifty )All kinds of soil. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 2 | Providing form work with steel plates 3.15mm ( three point fifften millimeter).thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 four Mtrs. and removal of the same for insitu-reinforced concrete and plain concrete work in:Suspended floor roofs landing balconies acees platform shelves ( cast in situ ) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 3 | Providing form work with steel plates 3.15mm ( three point fifften millimeter).thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 four Mtrs. and removal of the same for insitu-reinforced concrete and plain concrete work in: :Edges of slabs and breaks in floors and wallsUnder 20 twenty cm wide The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (One cement : Two coarse sand) : Four graded stone aggregate 20 mm (Twenty ) nominal size) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in foundations and plinth in cement mortar 1:4 (Onecement : Four coarse sand) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 7 | Providing and fixing 18 mm (Eigteen millimeter )thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.50 Per zero point fifty Square Meter The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight ) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twentymilimeter)thick cement mortar 1:4 (One cement : Four coarse sand), jointing with grey cement slurry @ 3.3 kg/( three point three )Per Square Meter including grouting the joints with white cement and matching pigments etc., complete ring with bricks of class d The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 9 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm( three hundred into three hundred )or more (thickness to be specified by the manufacturer), of 1st first quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm Twent millimeter thick Cement Mortar 1:4 (oneCement : four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ Per three point three Square Meter including pointing the joints with white cement and matching pigments etc., complete.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 10 | Tile work in skirting, risers of steps and dado up to 2 m ( two metre ) height over 12 mm (twelve millimeter ) thick bed of cement mortar 1:3 (One cement :Three coarse sand) and jointed with grey cement slurry @ 3.3 kg/Per( three point three Square Meter), including pointing in white cement mixed with pigment of matching shade complete Marble tiles (polished) Raj Nagar The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 11 | 20 mm (Twenty millimeter ) thick cement plaster of mix 1:6 (onecement: six coarse sand) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 12 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 13 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 14 | Finishing walls with 100%hundred percent Premium acrylic emulsion paint having VOC less than 50 gm/litre ( FiftyGram ) Litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 Per Square Meter. Over and including priming coat of exterior primer applied @ 0.90 (zero point nintylitre/10 Per ( ten ) Square Meter. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 15 | Applying Birla White Putty over Plaster Surface after thoroughly brushing the surface.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 16 | Providing and laying vitrified floor tiles of Kajaria/ Somany / Johnson / Bellin different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (Onecement : Fourcoarse sand), jointing with grey cement slurry @ 3.3 kg/ Perthree point Square Meter including grouting the joints with white cement and matching pigments etc., completeSize of Tile 500x500 mm five hundred into five hundredThe rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 17 | Providing and fixingaluminium work of Jindal / Hindalco for door window ventilators and Partition with extended built up standard tublar section for shutters of dors windows ventilatorsThe rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 18 | Providing and fixing glazing in aluminium workof Jindal / Hindalcodoor, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid basic item): With float glass panes of 4.0 mm (four point zero ) thickness (weight not less than 10 ten kg/ Per Square Meter The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 19 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16 mmtwo hundred fifty into sixteen millimeter The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 20 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm two hundred into ten millimeterThe rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 21 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mmone hundred fifty into tem millimeter The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 22 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125mm One hundred twenty five The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 23 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100mm hundred millimeter The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 24 | Making plinth protection 50mm ( fifty millimeter ) thick of cement concrete 1:3:6 (onecement : three coarse sand :six graded stone aggregate 20 ( twenty )mm nominal size) over 75mm ( seventy five ) thick bed of dry brick ballast 40( forty ) mm forty millimeter nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 25 | Providing under layer for plinth protection of 75mm(seventy five ) mm thick (unconsolidated) bed brick/stone aggregate 40mm nominal size with rammed and consolidated and grant with fine sand in preparation of ground.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 26 | Construction course rubble hammer dressed ‘U’ shape open surfaces drain with side wall 15x22cms ( fifteen into twenty two centimeters)in cement mortar 1:6 (one cement isto six sand)and inside plastering with cement plaster 1:3 (one cement isto three sand) including earth work and laying 10cm (Ten centimeters) cement concrete in 1:5:10 ( one cement isto five sand isto ten aggregate) 40mm (forty milimeters)nominal size and 7.5cm (seven decimal five centimeters) cement concrete 1:2:4 (one cement isto two sand isto four aggregate) 20mm (twenty milimeters) nominal size and finished with afloating cost of neat cement complete as per standard drawing and design including curing comlete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. |
| 27 | Constructing masonry Chamber 60x45x50 cm(sixty into forty five into fifty centi meter ) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (four hundred into two hunderd into two hundred )(inside) with locking arrangement and RCC top slab 1:2:4 mix (one cement : Two coarse sand : Four graded stone aggregate 20 ( twenty )mm nominal size) , including necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand: tengraded stone aggregate 40 forty millimeter mm nominal size) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm twelvethick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five )The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 28 | Constructing brick masonry manhole in cement mortar 1:4 (onecement : fourcoarse sand ) with R.C.C. top slab with 1:1.5:3 mix (onecement : One pointcoarse sand: three graded stone aggregate 20 twentymm nominal size), foundation concrete 1:4:8 mix (onecement : fourcoarse sand: eightgraded stone aggregate 40 ( forty ) mm nominal size), inside plastering 12 ( twelve ) mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (onecement : twocoarse sand : fourgraded stone aggregate 20 ( twenty )mm nominal size) finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5(seven point five )The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 29 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 (ten ) mm gap for thermal expansion, (i) Single socketed pipes75 mm (Seventy five millimeter ) diameter The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 30 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 ten mm gap for thermal expansion, (i) Single socketed pipes110 mm (one hundred tenmillimeter )diameter The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 31 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75 mm ( sevent five millimeter ) bend The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 32 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.110 mm ( one hundred ten millimeter ) bend The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 33 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10(ten ) mm gap for thermal expansion.75 mm (seventy five milimeter)Shoe The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
| 34 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 tenmm gap for thermal expansion.110mm ( one hundred ten milimeter ) Shoe The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government |
AI Tender Summary
Tender Timeline
Apr 25, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender