Supply, Installation, Testing And Commissioning Of Pump Set With All Enm Equipment At Meethapur Booster Pumping Station Of Badarpur Ac-53.- 1 Supply of Horizontal Split casing single stage pump having flanged suction & delivery and suitable to handle potable water. The pump should have following duties :- Discharge Capacity :- 63 LPS, Duty Head :- 40 Mtrs., Speed :- 1440 RPM, Material of Construction, Casing :- CI, Shaft :- Stainless Steel EN-8, Impeller :- CI, Sleeve:- SS-410, Wear ring :- CI, Make: Mather & Plate / Kirloskar/Jyoti/DJB approved 2 Supply of 50 HP 1500 RPM (Syn) squirrel cage induction motor suitable to operate on 400±10% Volt, 3Ph , 50Hz , Horizontal foot mounted confirming to IEC:60034-1 (SOR item code: 3.2.16) Make:- ABB/ Kirloskasr/ Jyoti/ Crompton/ DJB approved 3 Supply of MS Base frame, flexible tyre coupling, coupling guard suitable for above pump sets. 4 Supply of 50 HP 1500 RPM (Syn) squirel cage induction motor suitable to operate on 400±10% Volt, 3Ph , 50Hz , Horizontal foot mounted (SOR item code: 3.2.16), Make:- ABB/ Kirloskasr/ Jyoti/ Crompton/ DJB approved 5 LT Starter Panel comprising of following :- Incomer consisting of following :- 1 no. automatic Phase Sequence Correcting Power Switch Circuit with a provision for manual operation : 250 Amps 4P, 415 VAC 50 Hz Make:-L&T/ ABB/ Schneider/ Siemens/ Socomec/ HP ,1 no. MCCB TP 250 Amps 36 kA Thermal Magnetic with adjustable Trip Setting for Overload and Short Circuit Protection Make:-Siemens/ L&T/ ABB/ Schneider , 1 No. voltmeter with VSS 0-500 VAC Digital Type 96mm X 96mm Make:- Rishabh/ AE/ L&T/Schneider , 1 No. ammeter with ASS 0 - 250 Amps Digital type 96mm X 96mm Make:- Rishabh/AE/L&T/Schneider , 1 No. energy Meter (KwHr) Digital Type CT operated Class 0.5 Make:- Rishabh/AE/L&T/Schneider, 3 Nos. CT 250 / 5 Amps Class : 0.5 for metering Make:- Kappa / AE , 1 No. CT 250 / 5 Amps for Power Factor Control Make:- Kappa / AE , 3 Set R Y B Indication Make:- Teknic / L&T / ABB / Schneider , 3 Set On / Off / Trip Indication Make:-Teknic / L&T / ABB / Schneider , 1 No. CBCT based Earth Fault Protection System to trip the MCCB in case of Earth Fault, Make:- Prok Devices / Elmeasure / Siemens / Schneider / ABB / L&T , 1. No Earth Fault Trip Indication suitable for operation of 2P/set Make:- Teknic / L&T / ABB / Schneider. Control consisting of following :- 1 No.Transformer 415 VAC / 220VAC 500 VAMake:- Logicstat / Eq ,2 Nos. Control MCB DP 10 Amps Make:- Siemens/L&T/ABB/Schneider , 1 No. Control On Indication Make:- Teknic / L&T / ABB / Schneider. Starter Section consisting of following :- 50 HP Star / Delta Starter (1W + 1S) with following total material for both - 2 Nos. MCCB TP 36 kA Motor Duty Suitable for 50 HP Make :- Siemens/L&T/ABB/Schneider, 4 Nos. Contactor TP 95 Amps AC3 Duty 220 VAC Make:- Siemens/L&T/ABB/Schneider , 2 Nos. Contactor TP 63 Amps AC3 Duty 220 VAC Make:- Siemens/L&T/ABB/Schneider, 2 Nos. Thermal Over Load Relay 45-63 Amps Make:- Siemens/L&T/ABB/Schneider , 2 Nos. Single Phase / Phase Reversal Protection Make:- Minilec / L&T / E1 , 4 Set Start / Stop PB Make:- Teknic / L&T / ABB / Schneider, 4 Set On / Off / Trip Indication Make:- Teknic / L&T / ABB / Schneider, 4 Nos. Star / Delta Timer Make:- Siemens/L&T/ABB/Schneider. DOL Starter up to 5 H.P for 2 nos. P/set. having 2 No. MCB TP 16 Amps Make:- Siemens /L&T /ABB/Schneider , 1 No. Contactor 16 Amps TP 230 VAC Make:- Siemens /L&T /ABB/Schneider , 1 No. Overload Relay 2.8 - 4 Amps Make:- Siemens /L&T / ABB/Schneider , 1 No. Single Phase / Phase Reversal Protection Make:- Minilec / L&T / E1 , 2 Set Start / Stop PB Make:- Siemens/L&T/ABB/Schneider , 2 Set On / Off / Trip Indication Make:- Teknic / L&T / ABB / Schneider. Lighting Section having 4 Nos. 10 Amps SP MCB for lights/Fans etc Make:-Siemens/ L&T/ ABB/Schneider. Power Factor Section of 50 KVAR APFC System having 1 No. MCCB TP 160 Amps Thermal Magnetic 36 kA for APFC section isolation Make:- Siemens/L&T/ABB/Schneider , 1 No. Microprocessor based APFC Relay 6 Steps Make:- Epcos / L&T / ABB / Beluk , 4 Nos. Capacitor Heavy Duty MPP 10 KVAR 415 VAC Make:- Epcos / L&T / ABB / Beluk , 4 Nos. Capacitor Duty Contactor suitable for 20 KVAR or higher 220 VAC Make:- Siemens/L&T/ABB/Schneider , 4 Nos. MCB TP 40 Amps Make:- Siemens/L&T/ABB/Schneider , 4 Nos. Auto / Manual Selector Switch with LED Indication Make:- Teknic / L&T / ABB / Schneider , 8 Set Start / Stop PB in manual mode Make:- Teknic / L&T / ABB / Schneider , 2 Nos. Capacitor Heavy Duty MPP 5 KVAR 415 VAC Make:- Epcos / L&T / ABB / Beluk , 2 Nos. Capacitor Duty Contactor suitable for 10 KVAR or higher 220 VAC Make:- Siemens/L&T/ABB/Schneider , 2 Nos. MCB TP 20 Amps Make:- Siemens/L&T/ABB/Schneider , 2 Nos. Auto / Manual Selector Switch with LED Indication Make:- Teknic / L&T / ABB / Schneider , 4 Set Start / Stop PB in manual mode Make:- Teknic / L&T / ABB / Schneider. Miscellaneous Material having 1 No. Bus Bar with heak shrinkable sleeves Make:- Hindalco / EC Grade with certificate , 1 No. Powder Coated Panel Enclosure with accessories Make:- DJB Approved , 1 No. Control wire. Make:- DJB Approved , 1 No. Power Wire. Make:- DJB Approved , 1 No. Dismantling of existing panel, 1 No. Delivery and installation of new panel, 1 No. Lugs / Glands as required for connections. 6 Supply of PVC insulated PVC sheathed armound aluminium conductor power cable 1.1 KV as per IS-1554 ( Part-I) of following sizes :- 3½ Corex 120 mm² (SOR item code: 18.2.6) Make : Grandley / Gloster/DJB approved 7 Supply of PVC insulated on armoured single core flexible cooper cable for working voltage upto 1.1 KV as per IS:694/2010 of size 35 mm Sq., Make : Grandley / Gloster/DJB approved 8 Supply of CI Sluice Valves non rising with SS spindle ISI PN 1.0 IS 14846 flanged end of following sizes :- 200 mm dia. 9 Supply of CI Sluice Valves non rising with SS spindle ISI PN 1.0 IS 14846 flanged end of following sizes :- 150 mm dia. 10 Supply of CI non return valve without bypass swing type IS:5312 flange end of 150 mm dia. (SOR item code: 4.9.7) Make:- Kirloskar/ IVC/ DJB approved 11 Supply of CI foot valve swing type with strainer IS-4038 flanged of 200 mm dia. (SOR item code: 4.11.3) Make:- Kirloskar/ IVC/ DJB approved 12 Pipes & Special :- S/o M.S. Pipe of dia. 200 mm. 13 S/o M.S flange of dia. 200 mm. 14 S/o M.S. D.F.90° Bend of 200 mm dia. 15 S/o M.S. D.F.90° Bend of 150 mm dia. 16 S/o M.S. Pipe of 150 mm dia. 17 S/o M.S flange of dia. 150 mm. 18 S/o MS All flanged 200 x 200 x 200 mm dia. Tee. 19 S/o M.S All flanged 150x150x150mm dia. Tee. 20 Welding and fitting of above item as per site requirement. 21 Providing of new dewatering pump setSpecification:-Dewatering pump model type horizontal CI – casing, CI- impeller, C-40 Shaft, GM- Shaft Sleeve, gland packing duly Coupled electric motor 3.00HP/ 2.2KW 1400RPM 3PH. 415V TEFC. Make- Kirloskar/M&P/ Jyoti/ KSB/ Lubi/ Djb approved 22 Supply of 50 mm dia. GI medium class pipe of length 8 mtrs., pipe fittings like socket Elbow, Tee, union, nipple, with required fittings & base frame required for making arrangement for dewatering the water from pump house to man hole. 23 Making of RCC foundation for 2 nos. of above P/sets with all material like steel, cement, concrete & all other related civil work required to complete required size for above pump sets. 24 Supply of 3mm thick high voltage insulation mats, Size 1M X 2M. 25 Supply of Pressure gauge 150 mm dia. 0-100 PSI , GI pipe fitting , stock cock , copper tube , wooden board on the suction & delivery of each pump. One complete set of 250 mm dia. pressure gauge 0-100 PSI on main header with all fittings etc. 150 mm dia. Make:- DJB approved 26 Supply of fire extinguisher powder type 4 Kg capacity.Make:- DJB approved 27 Supply of fire bucket 9 liter capacity with stand of 4 nos. bucket Make :- DJB approved 28 Fabrication / Supply of retro reflective instruction board of size 1250 x 1000 mm made out of 40 x 40 x 6mm angle iron & 2 mm thick MS Sheet. The matter to be written on M.S. board on per the direction of engineer in charge. 29 Fabrication / Supply of retro reflective sign board made out of 40 x 40 x 6mm MS angle iron frame & 2 mm thick MS sheet & 50 mm dia. GI pipe for supporting the board. The size of board 4 mtr. X 1mtr. Including grouting of board in proper way. The board shall be duly painted & matter to be written as per the direction of engineer in charge. 30 Internal / external electrification :- Internal electrification of the pump house as detailed - Light point / fan point / exhaust fan point with 1.5 sq mm PVC insulated copper conductor cable in recess surface as required. (SOR item code: 31.1.3) Make:- Havells / Phillips / Bajaj 31 5 / 6 Amp. 3 Pin Socket Plug Point. (SOR item code: 31.23.4) Make:- Havells / Phillips / Bajaj 32 15 / 16 Amp. 3 Pin Socket Plug Point. (SOR item code: 31.23.5) Make:- Havells / Phillips / Bajaj 33 Providing & fixing 18W LED fittings including making connection as required. Make:- Havells / Phillips / Bajaj 34 Providing & fixing 45 W LED fittings including making connection as required. Make:- Havells / Phillips / Bajaj 35 Providing & fixing of GI bracket of 32 mm dia., suitable bend & shifting including fixing of bracket with MS clamp on pole on wall by grouting of both. Make:- GE / Crompton / Havells 36 Providing & fixing of MCB DB 63 Amp. Capacity in sheet metal enclosure made out of 16 SWG M.S. Sheet duly painted having insulator, aluminium link as required. Make:- GE / Crompton / Havells 37 Supply of PVC insulated PVC Sheathed armoured aluminium conductor cable of2 x 16 mm sq.. Make:- Grandley / Gloster / Havells/DJB approved 38 Supply of Ceiling Fan 1200mm sweep 39 Exhaust Fan 380 mm 40 S/o 6 mtrs. height Hot dip galvanized octagonalpoles with integral control box , MCB and cable termination arrangement with top bracket including excavation work , making foundation with cement , sand , concrete etc. complete as required. Make :- Bajaj / DJB Approved make 41 Supplying & Laying 25 mm x 5 mm GI strip at 0.50 mtr. Below ground as strip earth electrode including connection / terminating with GI nut, bolt, spring, washer etc as required. (jointing shall be done by overlapping & with 2 sets of GI nut bolt & spring washer space that 50 mm) Note:- All the electrification work shall be carried out strictly as per CPWD specification. 42 Providing / fixing of ISMB 300 x 140 mm along the length (7 mtrs.) of pump house with ISI marked triple spur geared chain pulley block with greed 80 alloy steel load chain tested to 50% overload confirming to IS- 3832 - 9087 of 2 ton capacity with overhead monorail travelling trolley with 5 mtr chain mounted on ISMB 300 x 140 approx. 7 mtr long. Make:- Indef / Morris / Avon / Hercules / Reva /DJB approved 43 Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories & providing masonry enclosure with cover plate having locking arrangement & watering pipe of 2.7 mtr long etc with charcoal / coke & salt as required. 44 Making of RCC foundation for 2 nos. P/Sets with all material like steel , cement, concrete, Foundation Bolt & all other related civil work required to complete the pump house 45 Installation , testing & commissioning of all above E&M equipments , laying of pipe line, Cable as per the instruction of engineer in charge , job also includes cost of packing , cartage , painting , watch & ward & freight , insurance and minor item/Jobs required for pump house operational & Commissioning the same up to the satisfaction of engineer in charge & one year guarantee. Note:- Wherever make not mentioned the make shall be as per approved DJB List / Reputed make
