Comprehensive Welcome Maintenance Services In Hpp Dunn Marg Gen Road And Mall Road Offrs Md Accn In The Area Of Age Br Ii Under Ge Maint Inf School Mhow
Tender Value
40 Lakhs
Estimated cost
Bid Submission
21 May 2022
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Comprehensive Welcome Maintenance Services In Hpp Dunn Marg Gen Road And Mall Road Offrs Md Accn In The Area Of Age Br Ii Under Ge Maint Inf School Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-May-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-May-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Preparation of old decorated surfaces of wall including brooming, washing, rubbing, scraping down including removal Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marksand applying one coat of white wash on walls complete all as specified and directed. |
| 2 | All as per item No. 1 above but on ceiling. |
| 3 | M&L for complete removalof existing treatment of any description from old decorated surface of wall and applying two coats of oil emulsion distemper white/coloured all as specified and directed by Engineer-in-Charge.Note:- (i)Birla wall care putty(if requried) shall be applied before oil emulsion distemper on certain surface of wall as shown by Engineer in Charge at site (ii)Putty shall be measured and paid seperately under relevent item. |
| 4 | Preparation of old decorated surfaces of wall including brooming, washing, roubbing scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marks and applying one coat of oil emulsion distemper all as specified and directed. |
| 5 | Preparation of old painted surfaces of wood/wood based materials exc 10cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 6 | All as per item No. 5 above but on steel surfaces. |
| 7 | M&L for complete removalof existing treatment of any description from wall and applying twocoats ofexterior weather proof water base emulsionpaint white/coloured over and including coat of oil baseprimer all as specified and directed. Note:- (i)Birla wall care putty(if requried) shall be applied before primer on certain surface of wall as shown by Engineer in Charge at site (ii)Putty shall be measured and paid seperately under relevent item. |
| 8 | M&L for Preparation of old decorated surfaces of wall including brooming, scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marksand applying one coat ofexterior weather proof water base emulsionpaint white/coloured over and including coat of oil baseprimer all as specified and directed. Note:- (i)Birla wall care putty(if requried) shall be applied before primeron certain surface of wall as shown by Engineer in Charge at site (ii)Putty shall be measured and paid seperately under relevent item. |
| 9 | M&L for preparation of old decorated surface of wall and applying two coats of interior plastic emulsion paint white/coloured all as specified and directed by Engineer-in-Charge.Note:- (i)Birla wall care putty(if requried) shall be applied before plasticemulsion painton certain surface of wall as shown by Engineer in Charge at site (ii)Putty shall be measured and paid seperately under relevent item. |
| 10 | M & L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling by birla putty and applying one coat of interior plastic emulsion paintwhite/coloured all as specified. Note:- (i)Birla wall care putty(if requried) shall be applied before plastic emulsion painton certain surface of wall as shown by Engineer in Charge at site (ii)Putty shall be measured and paid seperately under relevent item. |
| 11 | M&L for apllying one coat of french polishing on wooden surfaces of any description andwidth or girth including cleaning and preparing the surface including a coat of wood filler on old surface all as specified and directed. |
| 12 | M&L for applying one coat of 2mm thick wall care putty for applyingon walls/ceiling all as specified and directed |
| 13 | M & L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling Birla white putty and applying one coat of cement based paint over andincluding a coat of primer complete all as specified and directed. |
| 14 | All as per item No. 13 above but two coats of cement base paint |
| 15 | Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yardand rubbish off the primeses complete all as specified and directed. |
| 16 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all asspecified and as directed . |
| 17 | M&L for25mm thick PCC 1:2:4 type B0using 12.50mm graded crushedstone aggregate as in sub base, levelling course, etc complete all as specifiedand as directed. |
| 18 | M&L for40mm thick PCC1:2:4 type B1 using 20 mm graded stone crushed stone aggregateas in flooring complete all as specifiedand directed. |
| 19 | S&F non skidceramic colouredtiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified and as directed. |
| 20 | S&F for non –skidceramic colouredtiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed. |
| 21 | S&F non –skidceramic colouredtiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed. |
| 22 | S&F scratch free vitrified ceramic tiles10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm n exc 0.42 sqm ,in floors set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile dark shade over and including 15mm thick screed bed or bedding layerin CM 1:6 complete all as specified and as directed. |
| 23 | All as per item no 22above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified and as directed. |
| 24 | S&F glazed ceramic coloured tiles of size 300x200x7 mm thick as in vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thickbacking coat on fair faces of brick work in CM (1:4) complete all as specified and as directed. |
| 25 | S&F glazed ceramic coloured tiles of size 450x350x7 mm thick as in vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thickbacking coat on fair faces of brick work in CM (1:4) complete all as specified and as directed. |
| 26 | M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, sub base of floor, etccomplete all as specified and directed |
| 27 | M & L for 75mm thick cement concrete 1:3:6 type C2,using 40mm graded stone aggregateas in floor/ plinth protection, finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed. |
| 28 | M&Lfor chequered cement concrete tiles with grey cementand pigment of size 20cmX20cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6complete all as specified and directed. |
| 29 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc |
| 30 | M & L for machine cut kota stone slab 20 to 25mm thick (size not less than 550mm x 550mm) as in flooring, laid & jointed with grey cement mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 31 | M & L for machine cut kota stone slab flooring 20 to 25mm thick as in riser of step, dado and skirting over and including 10mm thick CM 1:4 backing coat on vertical surface of wall with rubbing and mirror polishing finished complete all as specified and as directed. |
| 32 | M&L for 20 mm thickgranite (green shade) machine cut, bedded and jointed with grey ement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality ofany sizeset and jointed in greycementslurry laid over and including 15 mm thick screed bed in CM (1:4) compete all as specified and as directed. |
| 33 | M&L for 20 mm thickgranite (black shade)machine cut, 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality ofany sizeset and jointed in greycementslurry laid over and including 10 mm thick backing in CM (1:4) compete all as specified and as directed. |
| 34 | M & L for stain removing or grinding of terrazoo flooring / kota stone flooring and otherstone flooring of any description and in any position, by using requried grinding machine in horizontal or vertical surface complete all as specified and as directed. |
| 35 | S&F in reparis500 litres capacity Rotational moulded polyethylene water storage tanks three layered (Cylindrical vertical with closed top) hoistedand fixed in position all as specified in SSR Part-I. |
| 36 | S&F in repairs1000 litres capacity Rotational moulded polyethylene water storage tanks three layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I. |
| 37 | M&L for Cleaning and removing all dirts and scales from service water tanksand from mouth of circulating pipes etc capacity of tank exceeding 250 litres but not exceeding 500 litrescomplete all as specified and directed. |
| 38 | All as per item no 37 above but tank exceeding 500 litres but not exceeding 1000 litres capacity complete all as specified and directed. |
| 39 | S&F in repair of 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 142 gms) |
| 40 | S&F in repair of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 210 gms) |
| 41 | Taking up ordown 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified anddirected . |
| 42 | All as per item no41 above but for 20mm bore complete all as specified and as directed. |
| 43 | S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed. |
| 44 | All as per item no43 above but for 20mm bore complete all as specified and as directed. |
| 45 | S&F in repairs 15 mm dia CP long neck bib taps screwed down high pressurechromium plated screwed for iron pipe and fixedcomplete all as specified and directed. |
| 46 | S&F in repairs 15 mm dia bib taps cast copper alloy, screwed down high pressurechromium plated screwed for iron pipe and fixedcomplete all as specified and directed. |
| 47 | S&F 15 mm dia bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed |
| 48 | S&F in repairstop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed. |
| 49 | S&F in repair pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specifiedand directed. |
| 50 | S&F in repairs 15 mm stop cockcast copper alloy, screwed down high pressurechromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 51 | S&F in repairs 15mm wall mixture with provision for bath telephone shower and overhead shower all as specified and directed. |
| 52 | S&F in repairs 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc complete all as specfied and directed. |
| 53 | S&F in repairsconcealedstop valves fancy type chromium plated with long shanksand cup fixed with 15 mm dia bore pipescomplete all as specifiedand as directed. |
| 54 | S&F in repairs Stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wallor including fixingcantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm including providing PVC waste pipe complete all as specified and directed. |
| 55 | S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etcincluding bedding in cement mortar on to dwarf wallor including fixingcantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed. |
| 56 | M&L for stainless steel plate rack 1 mm thick for kitchenof best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge. Note:- Size of plate rack shall not be less than 900x1200 mm and weight of rack shall not be less than8.5 Kg. |
| 57 | S&F in repairs PVC low level flushing cisternof 10 Litres capacity with all internal fittings including flush pipe and fixing to supply pipe |
| 58 | Taking down and re-fixing WHB/flushing cistern/EWC/ kitchen sink and similar items at same or other location, including cutting for ends and pinning inand ends of brackets or erecting stand but exclusive of fixing of supply and waste pipes,etc complete all as specified and as directed. |
| 59 | S&F in repair vitreous china wash down water closet pedestalpattern white excluding flushing cistern and flush pipes complete all as specified and as directed . |
| 60 | S&F in repair vitreous china squatting pan `Orissa \" pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including \"P\" or \"S\" trap complete all as specified and as directed. |
| 61 | S&F in repair health faucet with flexible pipe of one mtr length including wall hook forholding faucet complete all as specified and as directed. . |
| 62 | S&F in repair flexible type PVC waste pipe 32 mm bore of pipe for WHB/SINK/urinal, etc complete all as specified and as directed. |
| 63 | S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed. |
| 64 | S&F in repairs brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets complete all as specified and directed. |
| 65 | S& F in repair CP towel ring, dia not less than 200mmcomplete all as specified and directed. |
| 66 | S& F in repair CP toilet paper holder complete all as specified and as directed. |
| 67 | S&F in repair 125 mm size chromium plated showerrosewith siwel joint suitable for 15 mm bore GI pipes complete all as specified |
| 68 | S&F in repairsPlastic water closet seat cover in white colour,closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete. |
| 69 | S&F in repair CP Jet spraysuitable for 15mm bore with 1m length pipe and connecting pieces including all necessary fittings and accessories all as specified. |
| 70 | S&Fin repairswash basins, vitreous China white flat back of size 580x450mm including cutting for and pinning in ends with & including MS adjustable brackets or erecting standcomplete all as specified and directed. |
| 71 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm.complete. |
| 72 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 73 | S&F in repair corner glass shelf (with bracket) all as specified and directed |
| 74 | S&F in repair 150 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 75 | S&F in repair CP grating 100mm dia complete. |
| 76 | S&F in repair 600x450mm beveled edge mirror of selected quality glass mounte on PVC framed and fixed to wooden plug with CP screw and CP washer complete all as specified and directed. |
| 77 | S&F in repair 300x450mm PVC cabinetmirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer ccomplete all as specified and directed. |
| 78 | S&F in repair 25 mm dia aluminiumpowder coateddrapperycurtain rod withbrass /nickel chromicion coated bracket complete all as specified and directed . |
| 79 | S&F waste coupling of PTMT (half or full threaded) for bore dia of discharge pipe 32mm (minimum weight -45 gm ) complete all as specified and directed. |
| 80 | M&L for resecuring or easing and adjusting without taking down shutter of any description n.exc 1.0 sqm each |
| 81 | M&L for resecuring or easing and adjusting without taking down shutter of any description exc 1.0 sqm but n.exc 2.0 sqm each |
| 82 | S&F in repair 100mm size aluminium anodised, barrel tower bolt of extruded section. |
| 83 | All as per item No 82 above but 150mm long |
| 84 | S&F in repair aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted section and fixing bolt and sliding bolts of extruded section or cast - aluminium alloy and fixed. |
| 85 | S&Fin repair 150 mm long aluminium handles, cast type, anodised fixed to shutters . |
| 86 | S&Fin repair 100 mm Butt hinges medium weight cold rolled mild steel and fixed |
| 87 | S&Fin repair 75mm Butt hinges medium weight cold rolled mild steel and fixed |
| 88 | S&F in repair50mm Butt hinges medium weight cold rolled mild steel and fixed. |
| 89 | M&L for cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar1:4 ,cutting depth not exc 10 cm complete all as specified anddirected. |
| 90 | M&L Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed |
| 91 | Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed. |
| 92 | M & L for brickwork with sub class \"B\" modular bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 93 | M&L for half brick wall in CM ( 1:4 ) using sub class `B ` modular brick straight or curved on plan exceeding 6.0 metre mean radius complete all as specified anddirected. |
| 94 | M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finished even and smooth without using extra cementcomplete all as specifiedand directed. |
| 95 | M&L for rendering 15 mm thick in CM ( 1:4 ) mixed with WPC compound on wall/ concrete surfaces finished even and smooth without using extra cement complete all as specifiedand directed. Note: WPC shall be measured and paid separtelyunder relevant item. |
| 96 | M&L for 5 mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified anddirected . |
| 97 | Supply only Liquid water proofing compound |
| 98 | M&L forapplying two coats of oil bound distemper over a coat of 2mm thick wall care putty on new plaster surface of walls including preparation of surfaces complete all as specified. |
| 99 | M&Lfor preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 2mm thick white wall care putty on prepared surface and applying two coats of weather coat paint (Weather coat Exterior emulsion ) over a coat of whitewater base primer complete all as specified and directed by Engineer in charge. |
| 100 | M & L for preparation of newplasteredsurfaces of walls and applying two coats of cement based paint over a coat of primer completeall as specified and directed |
| 101 | M & L for preparing new plastered surfaces of wall and applying three coats of white wash on ceilingand cornices complete all as specified and directed. |
| 102 | S&F in repair 40mm dia cupboard knob fixed with nuts, screw and washer of MS, bright finshed |
| 103 | S&F in repair floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor |
| 104 | S&F in repairDoor closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed |
| 105 | S&F in repair Mild Steel Door Spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 106 | S&F in repairs of Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified. |
| 107 | Taking down shutters of any description n.exc 1.0 sqm each complete all as specified and as directed. |
| 108 | Taking down shutters of any description exc 1.0 sqm but n.exc 2.0 Sqm each complete all as specified and as directed. |
| 109 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed. |
| 110 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but nexc 4.0 sqm each complete all as specified and as directed. |
| 111 | S & Fsecond class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 112 | S&Fsecond class hard wood35 mm thick glazed and skeleton doorsshutter, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (a) Supplied and fitted to chowkats complete all as specified and directed. |
| 113 | S&F 30mm thick factory made, second class hard wood, glazed and skeleton window/ventilator shutter, open repeated and prepared to receive glass,gauze etc(with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed. |
| 114 | S&F 35mm thick second class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 115 | S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 116 | S&F solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per sepcification & drawing |
| 117 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail, lock rail & bottom rail. Panelling of plain colourPVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. |
| 118 | S&F 100 mm size butt hinges medium weight cold rolled mild steel and fixed. |
| 119 | S&F 75mm size butt hinges medium weight cold rolled mild steel and fixed |
| 120 | S&F 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified |
| 121 | S&F stainless steel butt hinges of 100mm size medium weight and fixed. |
| 122 | S&F aluminium anodised barrel tower bolts of extruded section, 150mm long. |
| 123 | S&F aluminium anodised barrel tower bolts of extruded section, 200mm long. |
| 124 | S&F extruded aluminium alloy handle fabricated type anodised of 100 mm size. |
| 125 | S&F extruded aluminium alloy handle fabricated type anodised of 150mm size. |
| 126 | Su&F second class hardwood small fittings such as door and window stops and the like not exceeding 200 cucm each fixed with screws all as specified. |
| 127 | S & F galvanised mild steel wire cloth of0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised wire staples,etc complete all as specified and as directed. |
| 128 | S&F hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty of fixed with beads including and Supply and fixing sheet glass plain ordinary quality 3.00 mm thick and glazing with oil putty/Bead not exc. 0.50 sqm in each pane complete all as specified and directed. |
| 129 | S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 130 | S&F figured glass pin head type3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 131 | S & F in repairs for galvanised Stainless steel wire cloth 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. |
| 132 | M & L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer with and including wood putty as requried complete all as specified. |
| 133 | M&L for cleaning of roof slab/chajja by sweeping with brooms,removing all depositions/mud/vegetations etc and removing the spoil to a distance n.exc 50m all as specified and directed. |
| 134 | M&: for cutting of shubs,vegetation including small trees,grass,bush,weed and roots under growth and saplings n.exc 30cm in girth on wall/roof/chajja upto 14 metre height from ground level including necessary scaffolding/ ladder etc and removing all vegetation, trees etc distance n.exc 50 m and clearing site all as specified and directed. |
| 135 | S&F in repairs veneered decorative plywood, grade 1 (with BWR resin) 12mm thick with decorative face veneers on both faces; fixed with screws to timber frame work all as specified and drected by Engineer-in-charge. |
| 136 | S&F in repairs block boards, grade 1 quality, exterior grade 18/19mm thcik decorative type with decorative faceveneer on both facesfixed with screws to timber frame work all as specified and drected by Engineer-in-charge. |
| 137 | S&F in repairs second class hard wood beads, straight of size n.exc 50sqcm for glazed or gauzed joinery, renewed, including mitres etc. complete all as specified |
| 138 | S&F in repairs stainless steel special hinges for modular kitchen cabinet all as specified and as directed. |
AI Tender Summary
Tender Timeline
May 14, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
May 21, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender