Construction Of Main Gate , Guard Room, Reception Room And Raising Of Boundary Wall At Sardar Patel Police University Jodhpur
Tender Value
70 Lakhs
Estimated cost
Bid Submission
10 May 2022
0 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jodhpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Main Gate , Guard Room, Reception Room And Raising Of Boundary Wall At Sardar Patel Police University Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 2 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls (any thickness) including attached pilasters, coloumns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, plain window sills, fillets etc up to floor three level excluding the cost of centering and shuttering IS 456-2000: 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 40 mm nominal size) (Crusher Broken). |
| 3 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall IS 1597 (Part-I) 1992 in : Cement Sand Mortar 1:6 (1-Cement:6-Sand). |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.All work up to plinth levelIS 456-2000: 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size) |
| 5 | Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls IS 1597 (Part-I) 1992 in : Cement Sand Mortar 1:6 (1-Cement:6-Sand). |
| 6 | Extra for facing as per design and detailed specifications IS 1597 (Part-II) 1992 including additional cost of stonesover item No. 6.1 & 6.2 for : Course rubble facing First Sort. |
| 7 | Add extra for rock facing using Jodhpur white sand stone with porper projection and chiesel dressing of edges of stone 2 line dressing for building corners,jambs including uniform joints. |
| 8 | Extra for facing as per design and detailed specifications IS 1597 (Part-II) 1992 including additional cost of stonesover item No. 6.1 & 6.2 for :Course rubble facing Second Sort. |
| 9 | Pillar masonry including bed plates as per specifications.Bed plate to be paid separately. |
| 10 | Extra for Wall curved in plan to mean radius not exceeding 6 Mtr. |
| 11 | Supplying and fixing in cement sand mortar 1:4 sand or other approved stone dassa or coping of thickness 75 to 100 mm (fine dressed) : Plain or Bull nosed. |
| 12 | Half brick masonry in foundation & plinth using bricks of designation 75 with nominal hoop reinforcement (2 Nos. 6mm MS bar) at every fourth course. Cement Sand mortar 1:6 (1-Cement:6-coarse sand). |
| 13 | Add extra over item No. 5.8 for half brick masonary in superstructure up to third story. |
| 14 | Extra for subsequent storey or height of 4.5 Mtr. or part thereof for all masonary work. Quantity in Sqm. |
| 15 | Supply and fixing ashlar lintels and Dassa exposed horizontal and vertical faces 3 - lines fine dressed (bearing bed & top surface made perfectly even) (b) upto 15 cm thick White Ashlar |
| 16 | Supplying and fixing ashlar solid block pillars fully fine (3 lines) dressed (a) Soorsagar or eqvt. White Ashlar |
| 17 | Supplying and fixing ashlar coping moulded and counter slopped 7 to 10 cm. thick (2 line dressed) (normal length of single piece not less than 0.90m) |
| 18 | Supply and fixing chittar or equivalent stone slab perchits with making edges and top surface level in cement mortar 1:3 complete finished Upto 2.15m span Soorsagar or eqvt. White Ashlar |
| 19 | Supply and fixing chittar or equivalent stone slab perchits with making edges and top surface level in cement mortar 1:3 complete finished Add extra for span more than 2.15m spanSoorsagar or eqvt. White Ashlar |
| 20 | Supplying and fixing 22 cm. Thick red Ashlar bed (pillar cap) 45 cm wide X 135 cm long (3 line dressed) all exposed side complete including cutting, moulding and chamffering etc. |
| 21 | Supplying and fixing white soorsagar stone coping 13 Cm thick & 45 cm wide with 3 set back groove & one projection with sloped tope edge including cutting, moulding and chamffering etc. |
| 22 | Supplying and fixing Jodhpur machine cut stone Kadau 29cm (11.5\")hight in CM 1:4 with rock facing with proper projection and machine cut edges of stone, two line dressing of building corners, jambs etc. including uniform joints using aluminium square section of size 12 mm to 15 mm as per requirement of course and width of stone not less than 12 Cm., with reqisite humber headers (minimum length of sotne 0.9 M) |
| 23 | Supply and fixing Jodhpur sand stone Machine cut Dash, Coping,sill,lintel fixed in cement sand mortar 1:4. (A) 15 cm (6\") thick |
| 24 | Add extra for facing with white ashlarstone three line dressedof size 300x300mm with min. thickness of 125mm, including all four edge are chamfered cut 12mm x 12mm with 3 line dressing, every fifth stone header with thickness min.300 mm,including additional cost of stone as per drawing or as approved by Engineer In Charge, Complete with all respect . |
| 25 | Supplying and fixing 7 to 8 cm thick soorsagar stone chajja outer and inner corner complete 3 lines fine dressed including cutting & moulding weather dripped (both sides dressed) (A) For white Ashlar stone outer corner |
| 26 | Providing and fixing Ist quality standard White Ivory straight edge Glazed Tiles ISI marked [IS:13753]of size 450mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). |
| 27 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). |
| 28 | Add extra over item No. 7.3, 7.4 & 7.5 for marble printed, granite shade tile. |
| 29 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehye resin, in glue both sides with approved steel fittings complete as per Annexure ‘A’ IS 2202 (Part I & II) 1999/1983. Decorative Teak veener both side35 mm thick shutter |
| 30 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 31 | Providing and fixing cow catcher made of R.S. joist angles channels MS rounds including cutting welding and fabrication with priming coat of red oxide (as per design). |
| 32 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 33 | Providing and fixing Square bars or other flat welded to window, ventilators etc. |
| 34 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm. long embedded in C.C. block 15x10x10 Cm. of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 55x20mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4 mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel power coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in-charge. Window fixed. |
| 35 | Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement IS 456-2000:with 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size). |
| 36 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members andremoval of formwork for superstructure up to 4.5 mtr aboveplinth,for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. |
| 37 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Thermo Mechanically treated bars |
| 38 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 39 | Random rubble dry stone Kharanja under floor. |
| 40 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 900 Sq. Cm :(A) 25 mm thick slab. |
| 41 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 900 Sq. Cm :(A) 25 mm thick slab. For area of each slab up to 2001 to 5000Sq. Cm : (A) 25 mm thick slab. |
| 42 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished:20 mm thick. |
| 43 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished:12 mm thick. |
| 44 | 6mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) |
| 45 | Pointing on stone masonary in cement sand mortar 1:3 (1-Cement:3-Sand) : Deep grooved pointing |
| 46 | Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete |
| 47 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Three or more coats). |
| 48 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work including preparation of base with primer, & touching of existing putty, lippy complete in all respect. |
| 49 | Painting with enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work. |
| 50 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 51 | P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : Size 580x440 mm. |
| 52 | P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor. |
| 53 | P & F water closet Seat Covers with brass hinges completeIS 2548-1996 : Solid PVC (ISI marked) grade-I White for EWC. |
| 54 | P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete. Flat Back (large) or half stall size 590x375x390 mm. |
| 55 | P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete. Angle back or spree flat back size 430x370x340mm or 440 x 350x370mm |
| 56 | P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall :PVC with PVC bend as per IS : 7231 |
| 57 | P & F Flush pipe of approved make with complete fittings for high level flushing cistern : PVC exposed (heavy) 32 mm. |
| 58 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 550 mm x 400 mm |
| 59 | P&F Beveled edge mirror of special glass of approved ISI makecomplete with6mm thick asbestos cement sheet ground fixed to wooden scrwes & washers. Size 600 x 450mm x 4mm thick |
| 60 | P&F towel rail or ring of approved quality /make: C.P. brass Towel rail elbow type with concealed screws size 450mm (heavy duty) |
| 61 | P&F Grating of approved quality/ make Stainless steel sheet size 125mm dia |
| 62 | P&F Shower arm 15mm dia of approved quality/ make. C.P. brass heavy & superior quality 150mm projection. |
| 63 | P&F Bath shower of approved quality/ make . C.P. brass of heavy & superior quality 150mm. |
| 64 | P&F extension pipe for bib cocks of approved quality/ make: C.P. brass of Heavy & superior quality 50x15mm |
| 65 | P&F Jet spray for water closet with C.P. copper tube flange of approved make |
| 66 | Providing and fixing Premium quality CP Brass fittings Complete as per direction of Engineer Incharge Bib Cock with long thread 15 mm nominal size |
| 67 | Providing and fixing Premium quality CP Brass fittings Complete as per direction of Engineer Incharge Angular stop cock with long thread 15 mm nominal size |
| 68 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15 mm nominal bore. Gun-metal 25 mm nominal bore. |
| 69 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15 mm nominal bore. Gun-metal 25 mm nominal bore. |
| 70 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. 500 litres capacity. |
| 71 | P & F CPVC Pipes in SDR 11 (Internal work) with CPVC fittings (IS:15778 Mark)including cutting and making good the walls and floors : (A) Exposed on Wall (i) 20mm dia |
| 72 | (ii) 25mm dia |
| 73 | (B) Concealed pipe in wall(i) 20mm dia |
| 74 | (ii) 25mm dia |
| 75 | P & F Square-mouth gully trap `A` grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 150 X 100mm, 7.2 Kg. C.I. cover with frame, Internal Chamber size 300 X 300mm. |
| 76 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant 110mm dia |
| 77 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Plain Tee 110 mm dia |
| 78 | Door Tee 110mm dia |
| 79 | Bend 87.5 110 mm dia |
| 80 | Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 100mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 300x300mm depth upto 0.5m & 5Kg C.I. cover with frame |
| 81 | Construction of septic tank in all type sof soil with 40cm thick masonry in CM 1:6 15cm thick CC bed of 1:5:10 M-15 grade CC flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3, Ralthal, Kharanja, 50mm thick stone partiton walls, 20mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos C.I. foot rests of approved design, two No. 450mm dia 25Kg each C.I. cover with frame, earth work etc. complete as per approed drawing incl. disposal of surplus earth wtihin a lead of 50mtr. IS 2470 (Part-I) 1985. Size 200x100x130cm (for 10users) |
| 82 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B\" for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110mm dia |
| 83 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B\" for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. Bend 87.5 Dg.110 mm dia |
| 84 | Door Bend 87.5Dg. 110 mm dia |
| 85 | Single `Y\" with Door 110 mm dia |
| 86 | Socket Plugs 110 mm dia |
| 87 | Single Tee 110 mm dia |
| 88 | Nahni Trap without Jali 110 mm dia |
| 89 | Vent Cowel 100mm |
| 90 | PART C- BOUNDARY WALLDismantling of flooring with care including stacking of servceable material and diposal of unserviceable material with in 50 Mtr. Lead forCement concrete flooring. |
| 91 | Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls IS 1597 (Part-I) 1992 in : Cement Sand Mortar 1:4 (1-Cement:4-Sand). |
| 92 | Extra for Wall up to 30 Cm. and less thickness. |
| 93 | Pillar masonry including bed plates as per specifications.Bed plate to be paid separately. |
| 94 | Extra for facing as per design and detailed specifications IS 1597 (Part-II) 1992 including additional cost of stonesover item No. 6.1 & 6.2 for : Course rubble facing First Sort. |
| 95 | Pointing on stone masonary in cement sand mortar 1:3 (1-Cement:3-Sand) : Deep grooved pointing |
| 96 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 97 | Add extra if square, rectangular hollow tubular sections are used. |
| 98 | Supplying and fixing ashlar face stone 10 cm thick fine (3 lines) dressed (a) Soorsagar or eqvt. White Ashlar |
| 99 | Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : New steel work (two or more coats). |
| 100 | Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete IS 2571-1970 : 50 mm thick with 20 mm thick nominal size aggregate. |
| 101 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall, covering conduit and making good the same as required. |
| 102 | 20 mm |
| 103 | 25 mm |
| 104 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate,screws,making connections, testing etc. as required. |
| 105 | Short point (up to 3 mtr.) |
| 106 | Medium point (up to 6 mtr.) |
| 107 | Long point(up to 10 mtr..) |
| 108 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & it\"s accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modularswitch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. |
| 109 | On board |
| 110 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required. |
| 111 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 112 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 113 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. Switch and socket outlet, making connection , testing , etc. as required. |
| 114 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required. |
| 115 | Double door (single phase) |
| 116 | 6 Way |
| 117 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. |
| 118 | Single pole MCB |
| 119 | 6 A to 32 A rating |
| 120 | Double pole MCB |
| 121 | 6 A to 32 A rating |
| 122 | Fourpole MCB |
| 123 | 40 A to63 A rating |
| 124 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required |
| 125 | 5 step fan regulator 2 Module |
| 126 | SITC of wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel made out of CRCA sheet , required hardware,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shadeThe panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shallnot be less than 1.6 mm up to 600 mm length / widthof any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall beof 2.0 mmthick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / withoutdetachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator) |
| 127 | Supplying and fixing of Aluminium / Copper bus barby means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. |
| 128 | Electrolytic grade Aluminium bus bar |
| 129 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required. |
| 130 | 2.5 Sq.mm 3 core flat / Round |
| 131 | P/Laying P.V.C./ XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. |
| 132 | 16.0 Sq.mm |
| 133 | 4 core |
| 134 | 4.0 Sq.mm |
| 135 | 3 core |
| 136 | P & F double ball bearing capacitor start, aluminium body & blade ceilingfanwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. |
| 137 | 1200 mm sweep |
| 138 | Maintenance free Gel EarthingwithPipe in pipe / Pipein striptechnologyfilled with anti corrosive conductive compound ( CPRI Tested )below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineralfillingcompound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone) and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes. |
| 139 | With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating |
| 140 | GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip |
| 141 | S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. |
| 142 | GI Earth Strip Hot dipped 25mmx3mm |
| 143 | P&F of IP65 protected LED Street Light Luminaire on existing bracket. Fixture made of powder coated single piece pressure die cast aluminum with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover ( from 45W onwards ) and should besecondary lens on each LED .The System level Luminaire efficacy >=100with High Power LEDs of CREE/NICHIA/OSRAM/PHILIPS/SEOULmake is to be used .TheLED Driver shall be BIS certified and Input Voltage AC 110 to 270 V AC with Input Frequency 50Hz±3% Power Factor >0.95 Driver Efficiency >85% , THD(I) <10%Humidity 10% to 90% RH Working Temp -20C to 50C .Life ExpectancyEqual or more than 50000 burning hrs with Minimum 70% initial lumens maintained ,Rendering Index >75% .Surge protection shall be min = 5 KV internal and min 10 KV external.Manufactures Word Mark/Name Engraved/Embossed on die cast housing to allow traceability/authenticity till life of fixture. Fixtures shall be CE complianed. |
| 144 | LED Street Light fixture 70 Watt |
| 145 | S & F of Street light bracket made out from following size of \" B \"class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required. |
| 146 | 32 mm Dia. |
| 147 | P&F of IP 20LED tube light 20W with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tubelights,integral driver, 2000 lumens +/- 5% tolerance,system lumens efficacy of 100 lm/watt minimum, expected life time of 25000 burning hours, CCT 5700K, ANSI, CRI 80, Driver efficiency >85%, Life expectancy of driver min. 30000 hrs. PF 0.95 at full load/ 230 volt AC. |
| 148 | P & Fof IP20 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external BIS certified 2.5 KV surge protected driver having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of = 100 lm / watt andlife time of minimum35000 Burning Hours with 70% of intial Lumen maintaned, CCT 3000°K / 4000°K/ 6000°K , maximum power consumption should not more than the specified rating and Fixture shall be of CE complianed. |
| 149 | Surface Mounting |
| 150 | LED Downlight 18/20W |
| 151 | P&F of Double ball bearing, capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required. |
| 152 | 225 mm sweep |
| 153 | P & F IS:371 marked6 amp surface type ceiling rose including making connection testing etc. as required. |
| 154 | P & F ISI marked6 amp bakelite batten/angle holder including making connection testing etc. as required. |
| 155 | P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make.Outer Dia. / Inner dia. |
| 156 | 50/55 mm |
| 157 | P&F of thermoplastic/ PVC cable junction boxes of following sizes including clamps for holding the box, cost of DIN rail for MCB mounting, connectors for cables terminals,threaded cable glands made of polyamide material etc. complete in all respect. |
| 158 | 175mm X 150mm X100mm |
| 159 | SITC of quick make and quick break4 POLEcurrent limiting MCCB having following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push( test) to trip , including making connections with lugs & spreaders,etc. as required. |
| 160 | With Thermal Magnetic release |
| 161 | up to 100 Amp , 25 kA, fixed O/L & S/C setting |
| 162 | P & F of IP 66 protected LED Flood Light Luminaire made of single piece powder coated pressure die cast aluminium housing with heat dissipation fins on housing, Toughened glass over with suitable lens on LEDs to achieve various beam angles. Input power (including driver loss) not more than 40W/60W with luminous Efficacy > 80 Lumen/W (As per LM 79). Appropriate beam angle lesn 45°/60°/80°/70° x 140° (High Mast) to be used as per requirement. LEDs of Cree/Nichia/Osram/Philips make is to be used at 1W/2W, CRI > 70 and CCT 2700 K - 6500 K. RGB LED to be used. The integral SMPS based electronic driver must have efficiency > 85%, Power factor >0.95, THD<20% and input Voltage range of 90-270 VAC at 50Hz. System life of 25000 Burning Hours with 70% of initial Lumens maintained. Fixtures must be in compliance with IS/CE Standards. |
| 163 | High Power LED Flood Light 40W |
| 164 | High Power LED Flood Light 70W |
AI Tender Summary
Tender Timeline
Apr 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender