|
| 1 | M079-Polythene water storage tank of ISI mark (e.g sintex/sinter/himgiri/gangotietc)with cover and locking system |
| 2 | M129HDPE pipes 75mm dia |
| 3 | M130HDPE pipes 90mm dia |
| 4 | M193GI Pipe 50 mm dia (TATA or equivalent make) |
| 5 | M337Jute |
| 6 | M922G.M. Ferrules |
| 7 | (i) 8 mm dia Wt. not less than 400 gms |
| 8 | (ii) 10 mm dia Wt. not less than 400 gms |
| 9 | (iii) 15 mm dia Wt. not less than 400 gms |
| 10 | (iv) 20 mm dia Wt. not less than 600 gms |
| 11 | (v) 25 mm dia Wt. not less than 900 gms |
| 12 | M923Stop Cocks |
| 13 | (i) 15 mm brass stop cock wt. not less than 300 gms |
| 14 | (ii) 20 mm brass stop cock wt. not less than 400 gms |
| 15 | (iii) 25 mm brass stop cock wt. not less than 575 gms |
| 16 | (iv) 32 mm brass stop cock wt. not less than 850 gms |
| 17 | (v) 40 mm brass stop cock wt. not less than 1.15 kg |
| 18 | (vi) 50 mm brass stop cock wt. not less than 2.15 kg |
| 19 | (vii) 15 mm dia C.I. Body brass working part stop cock. |
| 20 | (viii) 20 mm dia C.I. Body brass working part stop cock. |
| 21 | (ix) 25 mm dia C.I. Body brass working part stop cock. |
| 22 | M924G.M. Full way Valve |
| 23 | (i) 15 mm dia wt. not less than 300 gms without wheel |
| 24 | (ii) 20 mm dia wt. not less than 400 gms without wheel |
| 25 | (iii) 25 mm dia wt. not less than 500 gms without wheel |
| 26 | (iv) 32 mm dia wt. not less than 700 gms without wheel |
| 27 | (v) 40 mm dia wt. not less than 1.0 kg without wheel |
| 28 | (vi) 50 mm dia wt. not less than 1.4 kg without wheel |
| 29 | (vii) 65 mm dia wt. not less than 1.8 kg without wheel |
| 30 | (viii) 80 mm dia wt. not less than 2.5 kg without wheel |
| 31 | M925G.M. NON RETURN VALVE VERTICAL |
| 32 | (i) 15 mm dia wt. not less than 150 gms |
| 33 | (ii) 20 mm dia wt. not less than 250 gms |
| 34 | (iii) 25 mm dia wt. not less than 375 gms |
| 35 | (iv) 32 mm dia wt. not less than 600 gms |
| 36 | (v) 40 mm dia wt. not less than 700 gms |
| 37 | (vi) 50 mm dia wt. not less than 1.0 kg |
| 38 | (vii) 65 mm dia wt. not less than 1.20 kg |
| 39 | (viii) 80 mm dia wt. not less than 1.50 kg |
| 40 | (ix) 100 mm dia wt. not less than 1.80 kg |
| 41 | M926G.M. Non Return Valve Horizontal |
| 42 | (i) 15 mm dia wt. not less than 150 gms |
| 43 | (ii) 20 mm dia wt. not less than 250 gms |
| 44 | (iii) 25 mm dia wt. not less than 375 gms |
| 45 | (iv) 32 mm dia wt. not less than 600 gms |
| 46 | (v) 40 mm dia wt. not less than 700 gms |
| 47 | (vi) 50 mm dia wt. not less than 1.0 kg |
| 48 | (vii) 65 mm dia wt. not less than 1.20 kg |
| 49 | (viii) 80 mm dia wt. not less than 1.50 kg |
| 50 | (ix) 100 mm dia wt. not less than 1.80 kg |
| 51 | M927 COCKs |
| 52 | (i) 15 mm dia G.M. bib cock wt. not less than 300 gms |
| 53 | (ii) 15 mm dia brass bib cock wt. not less than 400 gms |
| 54 | (iii) 15 mm dia C.I. bib cock wt. not less than 400 gms |
| 55 | (iv) 15 mm dia C.I. Body brass working part spray painted bib cock wt. not less than 400 gms |
| 56 | (v) 15 mm dia C.I. Brass pillar cock cock wt. not less than 400 gms |
| 57 | (vi) 15 mm C.I. Plug cock ordinary |
| 58 | (vii) 15 mm C.I. push cock ordinary |
| 59 | M928CHROMIUM PLATED BRASS FITTINGS |
| 60 | (i) C.P. Shower rose 100 mm dia |
| 61 | (ii) C.P. Shower rose 125 mm dia |
| 62 | (iii) P.V.C. Shower rose 150 mm dia |
| 63 | (iv) P.V.C Shower rose 125 mm dia |
| 64 | M929CONNECTION PIPE |
| 65 | (i) 15 mm dia x 30 cm. long lead connection pipe with brass fittings. |
| 66 | (ii) 15 mm dia x 45 cm. long lead connection pipe with brass fittings. |
| 67 | (iii) 15 mm dia x 30 cm. long PVC connection pipe with brass fittings. |
| 68 | (iv) 15 mm dia x 45 cm. long PVC connection pipe withbrass fittings. |
| 69 | M930G.I. FITTINGS (CONFORMING TO I.S. - 1879 ) ISI Marked |
| 70 | [A] G.I. BEND |
| 71 | (i) 15 mm |
| 72 | (ii) 20 mm |
| 73 | (iii) 25 mm |
| 74 | (iv) 32 mm |
| 75 | (v) 40 mm |
| 76 | (vi) 50 mm |
| 77 | (vii) 65 mm |
| 78 | (viii) 80 mm |
| 79 | (ix) 100 mm |
| 80 | (x) 125 mm |
| 81 | (xi) 150 mm |
| 82 | [B] ELBOW OF THE FOLLOWING SIZES |
| 83 | (i) 15 mm |
| 84 | (ii) 20 mm |
| 85 | (iii) 25 mm |
| 86 | (iv) 32 mm |
| 87 | (v) 40 mm |
| 88 | (vi) 50 mm |
| 89 | (vii) 65 mm |
| 90 | (viii) 80 mm |
| 91 | (ix) 100 mm |
| 92 | (x) 125 mm |
| 93 | (xi) 150 mm |
| 94 | [C] TEE PLAIN OF THE FOLLOWING SIZES |
| 95 | (i) 15 mm |
| 96 | (ii) 20 mm |
| 97 | (iii) 25 mm |
| 98 | (iv) 32 mm |
| 99 | (v) 40 mm |
| 100 | (vi) 50 mm |
| 101 | (vii) 65 mm |
| 102 | (viii) 80 mm |
| 103 | (ix) 100 mm |
| 104 | (x) 125 mm |
| 105 | (xi) 150 mm |
| 106 | [D] REDUCING TEE PLAIN OF THE FOLLOWING SIZES(Taking larger dimension) |
| 107 | (i) 20 mm |
| 108 | (ii) 25 mm |
| 109 | (iii) 32 mm |
| 110 | (iv) 40 mm |
| 111 | (v) 50 mm |
| 112 | (vi) 65 mm |
| 113 | (vii) 80 mm |
| 114 | (viii) 100 mm |
| 115 | (ix) 125 mm |
| 116 | (x) 150 mm |
| 117 | [E] SOCKET PLAIN OF THE FOLLOWING SIZE (Taking larger dimension) |
| 118 | (i) 15 mm |
| 119 | (ii) 20 mm |
| 120 | (iii) 25 mm |
| 121 | (iv) 32 mm |
| 122 | (v) 40 mm |
| 123 | (vi) 50 mm |
| 124 | (vii) 65 mm |
| 125 | (viii) 80 mm |
| 126 | (ix) 100 mm |
| 127 | (x) 125 mm |
| 128 | (xi) 150 mm |
| 129 | [F] REDUCING SOCKET PLAIN OF THE FOLLOWING SIZES (Taking larger dimension) |
| 130 | (i) 20 mm |
| 131 | (ii) 25 mm |
| 132 | (iii) 32 mm |
| 133 | (iv) 40 mm |
| 134 | (v) 50 mm |
| 135 | (vi) 65 mm |
| 136 | (vii) 80 mm |
| 137 | (viii) 100 mm |
| 138 | (ix) 125 mm |
| 139 | (x) 150 mm |
| 140 | [G] UNION SOCKET OF THE FOLLOWING SIZES |
| 141 | (i) 15 mm |
| 142 | (ii) 20 mm |
| 143 | (iii) 25 mm |
| 144 | (iv) 32 mm |
| 145 | (v) 40 mm |
| 146 | (vi) 50 mm |
| 147 | (vii) 65 mm |
| 148 | (viii) 80 mm |
| 149 | (ix) 100 mm |
| 150 | (x) 125 mm |
| 151 | (xi) 150 mm |
| 152 | [H] PLUGS OF THE FOLLOWING SIZES |
| 153 | (i) 15 mm |
| 154 | (ii) 20 mm |
| 155 | (iii) 25 mm |
| 156 | (iv) 32 mm |
| 157 | (v) 40 mm |
| 158 | (vi) 50 mm |
| 159 | (vii) 65 mm |
| 160 | (viii) 80 mm |
| 161 | (ix) 100 mm |
| 162 | (x) 125 mm |
| 163 | (xi) 150 mm |
| 164 | [I] JAM NUTS OF THE FOLLOWING SIZES |
| 165 | (i) 15 mm |
| 166 | (ii) 20 mm |
| 167 | (iii) 25 mm |
| 168 | (iv) 32 mm |
| 169 | (v) 40 mm |
| 170 | (vi) 50 mm |
| 171 | (vii) 65 mm |
| 172 | (viii) 80 mm |
| 173 | (ix) 100 mm |
| 174 | (x) 125 mm |
| 175 | (xi) 150 mm |
| 176 | [J] G.I. NIPPLE OF THE FOLLOWING SIZES |
| 177 | (i) 15 mm dia x 100 mm long |
| 178 | (ii) 20 mm dia x 100 mm long |
| 179 | (iii) 25 mm dia x 100 mm long |
| 180 | (iv) 32mm dia x 100 mm long |
| 181 | (v) 40 mm dia x 100 mm long |
| 182 | (vi) 50 mm dia x 100 mm long |
| 183 | (vii) 65 mm dia x 100 mm long |
| 184 | (viii) 80 mm dia x 100 mm long |
| 185 | (ix) 100 mm dia x 100 mm long |
| 186 | [K] G.I. PIPES MIDIUM(Tata mark) OR EQUIVALENT as per IS-1239 (part-01)/2004 ISI Marked/Medium Quality |
| 187 | (i) 15 mm dia |
| 188 | (ii) 20 mm dia |
| 189 | (iii) 25 mm dia |
| 190 | (iv) 32 mm dia |
| 191 | (v) 40 mm dia |
| 192 | (vii) 65 mm dia |
| 193 | M931MIRRORS |
| 194 | (a) Mirror of 6 mm thick plain glass 600 mm x 450 mm beveled edge mirror includingC.P. brass revolving fittings 3 mm plywood boardand C.P. hinges etc.to fix the mirror |
| 195 | (b) -do- 450 mm x 300 mm -do- |
| 196 | M932(a) Glass shelf 600 mm x 125 mm with C.P. brass rail |
| 197 | (b) -do- 450 mm x 125 mm -do- |
| 198 | M933(a) C.P. Brass towel rail 20 mm x 600 mm with bracket all complete |
| 199 | (b) Anodized aluminum 20 mm x 600 mm towel rail complete with brackets |
| 200 | M934C.P. brass soap dish medium quality with screw andhinges etc. |
| 201 | M935C.P. liquid soap solution holder |
| 202 | M936VITREOUS WHITE GLAZED INDIAN WATER CLOSET OF Hindustan / Parry Ware / Cera / Naycer or anyotherequivalent make |
| 203 | (a) 580 mm long |
| 204 | (b) 510 mm long |
| 205 | (c) 450 mm long |
| 206 | (d) 510 mm long White glazed fiber I.W.C |
| 207 | M937PAIR OF VETREOUS WHITE GLAZED FOOT REST OF Hindustan / Parryware / Cera / Naycer or any other equivalent make |
| 208 | M93815 liters capacity pull and let go high level C.I. cistern complete with ball cock and a pair of bracket |
| 209 | M939(a) 12.5 liters lowdown C.I. Cistern |
| 210 | (b) 10.0 liters capacity P.V.C. low design cistern |
| 211 | M940(a) White Glazed vitreous E.W.C with \"P\" trap orany other equivalent make |
| 212 | (b) E.W.C with \"S\" trap 400 mm high of Hindustan / Parry ware / Cera / Naycear or any other equivalent make |
| 213 | (c) Black / white plastic seat for E.W.C -do- as above. |
| 214 | M941(a) White glazed vitreous earthen were urinal flat back of Hindustan / Parryware / Cera / Naycer or any other equivalent make 600 mm x 350 mm size |
| 215 | (b) -do- squatting small 450 mm x 350 mm |
| 216 | (c) -do- squatting large 600 mm x 350 mm |
| 217 | (d) White glazed vitreous earthen ware urinal standing corner size 600 mm x 350 mm Hindustan / Parryware /Cera / Naycer or any other equivalent make |
| 218 | (e) Partition plate for urinal 25\" x 13\" size |
| 219 | (f) 5 liters C.I. automatic cistern with all P.V.C fittings |
| 220 | M942White glazed vitreous Wash Hand Basin 550 mm x 400mm size of Hindustan / Parryware / Cera / Naycer or any otherequivalent make |
| 221 | M943White glazed vitreous earthen ware kitchensinks of Hindustan / Parryware / Cera / Nayceror any other equivalent make |
| 222 | (a) Kitchen sink 600 mm x 450 mm x 200 mm (24\" x 18\" x 8\") |
| 223 | (b) Kitchen sink 600 mm x 450 mm x 250 mm (24\" x 18\" x 10\") |
| 224 | (c) Lab sink 450 mm x 300 mm x 150 mm (18\" x 12\" x 6\") |
| 225 | (d) Lab sink 300 mm x 250 mm x 150 mm (12\" x 10\" x 6\") |
| 226 | M944DRAIN BOARD |
| 227 | (a) 600 mm x 450 mm (24\" x 18\") |
| 228 | (b) 525 mm x 450 mm (21\" x 18\") |
| 229 | M945H.C.I. Pipes |
| 230 | (a) 50 mm dia single socket 6\"-0\" (with ear weight 13 kg) |
| 231 | (b) 80 mm dia single socket 6\"-0\" (with ear weight 18 kg) |
| 232 | (c) 100 mm dia single socket 6\"-0\" (with ear weight 23 kg) |
| 233 | (d) 150 mm dia single socket 6\"-0\" (with ear weight 30 kg) |
| 234 | (e) 50 mm dia double socket 6\"-0\" (with ear weight 14 kg) |
| 235 | (f) 80 mm dia double socket 6\"-0\" (with ear weight 19 kg) |
| 236 | (g) 100 mm dia double socket 6\"-0\" (with ear weight 25 kg) |
| 237 | (h) 150 mm dia double socket 6\"-0\" (with ear weight 13 kg) |
| 238 | (i) 50 mm dia single socket 3\"-0\" (with ear weight 7.25 kg) |
| 239 | (j) 80 mm dia single socket 3\"-0\" (with ear weight 10.5 kg) |
| 240 | (k) 100 mm dia single socket 3\"-0\" (with ear weight 13.75 kg) |
| 241 | (l) 150 mm dia single socket 3\"-0\" with ear |
| 242 | (m) 50 mm dia single socket 2\"-0\" (with ear weight 5.35 kg) |
| 243 | (n) 80 mm dia single socket2\"-0\" (with ear weight 8.00 kg) |
| 244 | (o)100 mm dia single socket 2\"-0\"(with ear weight 10.10 kg) |
| 245 | (p) 150 mm dia single socket 2\"-0\" with ear |
| 246 | (q) 50 mm dia single socket 1\"-0\" (with ear weight 3.4 kg) |
| 247 | (r) 80 mm dia single socket 1\"-0\"(with ear weight 5.50 kg) |
| 248 | (s) 100 mm dia single socket 1\"-0\"(with ear weight 7.60 kg) |
| 249 | (t) 150 mm dia single socket |
| 250 | M946H.C.I. FITTINGS. |
| 251 | (I) Plain bend of following size |
| 252 | (a) 50 mm dia (weight without ear and socket 2.75 kg) |
| 253 | (b) 80 mm dia (weight without ear and socket 3.5 kg) |
| 254 | (c) 100 mm dia (weight without ear and socket 4.5 kg) |
| 255 | (d) 150 mm dia (weight without ear and socket 4.5 kg) |
| 256 | (II) Bend with door with following size |
| 257 | (a) 50 mm dia (Wight without ear and socket 2.75 kg) |
| 258 | (b) 80 mm dia (Wight without ear and socket 4.00 kg) |
| 259 | (c) 100 mm dia -do- 5.5 kg |
| 260 | (d) 150 mm dia -do- |
| 261 | (III) Single Junction with door of followings sizes. |
| 262 | (a) 50 mm dia (weight without ear and socket 3.75 kg) |
| 263 | (b) 80 mm dia (weight without ear and socket 6.50 kg) |
| 264 | (c) 100 mm dia -do- 9.50 kg |
| 265 | (d) 150 mm dia -do- |
| 266 | (IV) Double junction with door of following sizes. |
| 267 | (a) 50 mm dia -do- 4.5 kg |
| 268 | (b) 80 mm dia -do- 7.00 kg |
| 269 | (c) 100 mm dia -do- 13.00 kg |
| 270 | (d) 150 mm dia -do- |
| 271 | (V) Heel rest bend of following sizes |
| 272 | (a) 50 mm dia |
| 273 | (b) 80 mm dia |
| 274 | (c) 100 mm dia |
| 275 | (d) 150 mm dia |
| 276 | (VI) Cowel of following sizes |
| 277 | (a) 50 mm dia (weight without ear and socket 2.25 kg) |
| 278 | (b) 80 mm dia (weight without ear and socket 3.25 kg) |
| 279 | (c) 100 mm dia (weight without ear and socket 3.25 kg) |
| 280 | (d) 150 mm dia -do- |
| 281 | (VII) 100 mm dia \"P\" trap (wt without ear and socket)8.5 kg |
| 282 | (VIII) 100 mm dia \"P\" trap (wt without ear and socket)8.8 kg |
| 283 | (IX) 100 mm x 80 mm floor trap (weight without ear and socket) 4.00 kg |
| 284 | (X) Pass over 50 mm x 150 mm for 50 mm projection |
| 285 | (XI) -Do- 100 mm x 150 mm for 100 mm projection |
| 286 | (XII) Inverted Junction single 100 mm x 50 (weight without ear and socket) 9.0 kg |
| 287 | (XIII) Inverted Junction double 100 mm x 50 mm x 50 mm(weight without ear and socket) 12.0 kg |
| 288 | (XIV) H.C.I. offset 80 mm projection of the following Size |
| 289 | (a) 50 mm dia (weight without ear and socket) 2.75 kg |
| 290 | (b) 80 mm dia -do- 3.50 kg |
| 291 | (c) 100 mm dia -do- 5.00 kg |
| 292 | (d) 150 mm dia -do- |
| 293 | (XV) H.C.I. Socket of following sizes |
| 294 | (a) 50 mm dia (weight without ear) 1.50 kg |
| 295 | (b) 80 mm dia (weight without ear) 3.00 kg |
| 296 | (c) 100 mm dia (weight without ear) 4.50 kg |
| 297 | (d) 150 mm dia (weight without ear) -do- |
| 298 | M947C.I. Cover with frame for manhole and inspection chamber |
| 299 | (a) 600 mm x 450 mm size (wt. 39 kg) |
| 300 | (b) 600 mm x 450 mm size (wt. 25 kg) |
| 301 | (c) 500 mm x 450 mm size (wt. 25 kg) |
| 302 | M948C.I. Bracket pair for W.H.B |
| 303 | (a) 550 mm x 400 mm size (22\" x 16\") |
| 304 | (b) -do- for 12.5 liter cistern |
| 305 | (c) -do- for 600 mm x 450 mm (24\" x 18\") sink |
| 306 | (d) 40 mm x 60 mm MS Plate bracket for sink as above |
| 307 | M949(a) 32 mm (1 1/4\") C.P. Brass waste for W.H.B |
| 308 | (b) 40 mm (1 1/2\") C.P. Brass waste for W.H.B for sink |
| 309 | (c) 32 mm (1 1/4\") C.P. waste of white metal |
| 310 | (d) 40 mm (1 1/2\") C.P. waste of white metal |
| 311 | M950(a) 32 mm (1 1/4\") P.V.C. waste pipe 750 mm long (2\"6\" long) withbrass Union for W H B |
| 312 | (b) 40 mm (1 1/2\") P.V.C. waste pipe 750 mm long(2\"6\" long)with brass Union for W H B |
| 313 | M95132 mm (1 1/4\") P.V.C. telescopic flush pipe with brass union for high level cistern |
| 314 | M952Rubber Inserttion 3 mm (1/8\") thick |
| 315 | M953Pig Lead |
| 316 | M954Yarn |
| 317 | M955Rubber Gasket for D.I pipe of Good quality |
| 318 | (a) 80 mm |
| 319 | (b)100 mm |
| 320 | (c)125 mm |
| 321 | (d)150 mm |
| 322 | (e)200 mm |
| 323 | (f)250 mm |
| 324 | (g)300 mm |
| 325 | (h)350 mm |
| 326 | (i)400 mm |
| 327 | (j)450 mm |
| 328 | (k)500 mm |
| 329 | (l)600 mm |
| 330 | (m)700 mm |
| 331 | (n)750 mm |
| 332 | (o)800 mm |
| 333 | (p)900 mm |
| 334 | (q)1000 mm |
| 335 | (r)1200 mm |
| 336 | M956Cotton waste |
| 337 | M957Asbestos Suta (gland packing) |
| 338 | M958Solvent Cement |
| 339 | M959Hydrocloric acid (Sepecific gravity 1.20) |
| 340 | M960CP & PVC Fitting |
| 341 | (i)32 mm dia C.P. Waste |
| 342 | (ii)32 mm dia PV C waste pipe 750 mm long with coupling |
| 343 | (iii)40 mm dia C.P. waste |
| 344 | (iv 40 mm dia PVC waste pipe 750 mm long with coupling |
| 345 | (v 100 mm dia steel jali |
| 346 | (vi)15 mm dia C.P. nipple with coupling (short pieces) |
| 347 | (vii)50 mm dia PVC pipe with coupling |
| 348 | M961Special type of C.P. Bath room fittings for V.I.P.buildings(JAL, Jaquar, Marc or equivalent mark) |
| 349 | (i) Pillar Cock (ISI) |
| 350 | (ii) Pillar Cock (Long neck) |
| 351 | (iii) Bib Cock (ISI) |
| 352 | (iv) Bib Cock (Long Thread) |
| 353 | (v) Angular Stop Cock |
| 354 | (vi) Angular Stop Cock (Long Thread) |
| 355 | (vii) Concealed stop cock reduce (ISI) |
| 356 | (viii) Concealed stop Cock heavy-duty extra adjustable wall flange |
| 357 | (ix) Long Body Bib Cock |
| 358 | (x) Swan Neck Tap with left hand Operating Knob |
| 359 | (xi) Central hole basin mixer (Best Quality) |
| 360 | (xii) Wall mixer with telephonic shower arrangement |
| 361 | (xiii) Wall mixer with provision for over head shower with elbow coupling and well flange |
| 362 | (xiv) Wall mixer 3 in 1 system with provision for over head shower with elbow coupling and wall flange |
| 363 | (xv) Sink mixer with swinging casted spout |
| 364 | (xvi) Sink Cock with swinging casted spout |
| 365 | (xvii) 4 - way diverter for concealed fittings |
| 366 | (xviii) Pressure adjustable shower with revolving joint |
| 367 | (xix) Telephone shower with flexible pipe |
| 368 | (xx) Flush Cock with wall flange (25 mm) |
| 369 | (xxi) Towel Rail 24\" |
| 370 | (xxii) Towel Ring |
| 371 | (xxiii) Soap dish |
| 372 | (xxiv) Tumbler Holder |
| 373 | (xxv) Toilet Paper Holder |
| 374 | (xxvi) Glass Shelf 22\" |
| 375 | (xxvii) Corner glass shelf with bracket |
| 376 | (xxviii) Flush Valve complete with 32 mm size controlcock & flange |
| 377 | M962C.I Special & PVC Pipes |
| 378 | 1. C.I double shocketted fittings bend such as bend, tee, taper, |
| 379 | (a) 80-200 mm |
| 380 | (b) 250-700 mm |
| 381 | (c) 700-1000 mm |
| 382 | 2. C.I double flange fittings such as tee, taper, tailpiece,bend etc |
| 383 | (a) 80-200 mm |
| 384 | (b) 250-700 mm |
| 385 | (c) 700-1000 mm |
| 386 | Spare parts of Hand Pump |
| 387 | M963Hexagonal Bolt M12x1.75x40mm long common to Marks II & III |
| 388 | M964Hexagonal Nut M12x1.75mm |
| 389 | M965Washer M12 (2.5mm thick) |
| 390 | M966High tensile bolt M10x1.5x40mm long. |
| 391 | M967Nyloc Nut M10x1.5mm |
| 392 | M968Handle Axle (Stainless Steel) |
| 393 | M969Washer for Handle Axle (4mm thick) |
| 394 | M970Ball Bearing 6204 Z |
| 395 | M971Spacer for Handle. |
| 396 | M972Chain with coupling. |
| 397 | M973Hexagonal Bolt for front Cover M12x1.75mm long. |
| 398 | M974Nitrile Rubber cup washer for Mark – II & III |
| 399 | M975Nitrile Sealing ring Mark – II |
| 400 | M976Nitrile Rubber Seating Big for Lower valve Mark-II |
| 401 | M977Nitrile Rubber Seating Small for Upper valve Mark-II. |
| 402 | M978Hexagonal rod coupling M12x1.75x50mm long. |
| 403 | M979Pump Head Assembly (G.I.) with front cover, Bolt & third plate. |
| 404 | M980Front cover (G.I.) |
| 405 | M981Handle Assembly (G.I.) |
| 406 | M982(a) Water Tank Assemblyfor Mark – II (G.I.) |
| 407 | (b) Water Tank Assembly for Mark – III (VLOM-65) |
| 408 | M983Stand Assembly (G.I.) Normal. |
| 409 | M984Stand Assembly (Telescopic) (G.I). |
| 410 | M985Connecting Rod 3mtr. Long with coupling and nut (Electrogalvanized) |
| 411 | M986a) Cylinder Assembly complete set for Mark-II |
| 412 | b) Cylinder Assembly complete set for Mark-III (VLOM-65) |
| 413 | M987a) Upper valve Assembly complete set for India Mark-II |
| 414 | b) Upper valve Assembly complete set for India Mark-III (VLOM-65) |
| 415 | M988a) Lower valve Assembly complete set for India Mark-II |
| 416 | b) Lower valve Assembly complete set for IM-III |
| 417 | M989Reducer Cap for Cylinder Mark-II |
| 418 | M990a) Plunger Rod (S.S.) for Mark – II |
| 419 | b) Plunger Rod (S.S.) for Mark – III |
| 420 | M991Upper valve Guide (G.M.). |
| 421 | M992Rubber Seat Retainer for Mark-II |
| 422 | M993Third Plate for Head Assembly (Galanized) |
| 423 | M994Cylinder Body with brass liner for IM-II with reducer cap for Top and Bottom. |
| 424 | M995Gun Metal Spacer. |
| 425 | M996Check valve Guide Mark-II |
| 426 | M997a) Check Valve Seat for Mark – II |
| 427 | b) Check Valve Seat for Mark – III |
| 428 | M998Nitrile Rubber “O” ring (VLOM-65) |
| 429 | M999Push Rod for Mark – III (S.S). |
| 430 | M1000Check Nut for Push Rod (S.S.). |
| 431 | M1001Nitrile Rubber Cup Washer for VLOM-50 |
| 432 | M1002Nitrile Rubber Sealing Ring for Mark – III VLOM-65 |
| 433 | M1003Nitrile Rubber Seating Big for Lower Valve MK-II |
| 434 | M1004Nitrile Rubber Seating Big for Lower Valve M-III VLOM-65) |
| 435 | M1005Nitrile Rubber Bobbin VLOM-50 |
| 436 | M1006Nitrile Rubber “O” Ring VLOM-50 |
| 437 | M1007Nitrile Rubber cone for VLOM-50 |
| 438 | M1008Nitrile Rubber cone for VLOM-65 |
| 439 | M1009Nitrile Rubber Centralizer 150mm for (VLOM-65). |
| 440 | M1010Nitrile Rubber Centralizer 125mm for (VLOM-65). |
| 441 | M1011Nitrile Rubber Centralizer 150mm for (VLOM-50). |
| 442 | M1012Nitrile Rubber Centralizer 125mm for VLOM-50 |
| 443 | M1013Nitrile Rubber Centralizer 100mm for VLOM-50 |
| 444 | M1014Water Tank Assembly Mark – III VLOM-50 |
| 445 | M1015Cylinder Assembly Complete set for Mark – III (VLOM-50) |
| 446 | M1016Upper valve Assembly complete set for IM-III (VLOM-50) |
| 447 | M1017Lower valve Assembly complete set for IM-III (VLOM-50) |
| 448 | M1018a) Upper Cap Cylinder Mark – III (VLOM-65) |
| 449 | b) Upper Cap Cylinder Mark – III (VLOM-50) |
| 450 | M1019a) Bottom Cap for Mark – III (VLOM-50) |
| 451 | b) Bottom Capfor Mark – III (VLOM-65) |
| 452 | M1020Follower for IM-III |
| 453 | M1021Cage for Mark-III |
| 454 | M1022S.S. Hexagonal Bolt M-6x25mm long. |
| 455 | M1023Basic rate of standard I.S.I. mark Deep Well Hand Pump for India mark-2, I.S.I. 15500 (Part 2) / 2004 with latest revision including 12mm x 3meter long 8 no. Connecting Rods made of bright bar electro-galvanized fitted with coupler & normal stand assembly ecommended for use with cylinder assembly suitable for bore well dia 100 to 125mm casing pipe. |
| 456 | M1024Basic rate of UPVC pipe 125mm dia conforming to I.S.I. latest revision is 12818/2016 CML No. 5543459 |
| 457 | M1025Basic rate of 32mm G.I. pipe in 3 mtrs. Length (medium) with seamless socket as per relevent B.I.S. specificationIS 1239(PART-I)/2004 |
| 458 | M1026DI Pipe : Providing and Supplying ISI mark Centrifugally cat (Spun) Ductile Iron Pipes of 100 mm and above all diameter for water works with socket & spigot ends confirming to IS 8329/2000 in the standard working lengths of 4.5, 5.5 & 6 m suitable for classification K-7 & K-9 suitable for push-on-joint (rubber gusket D jointing) with cement mortar lining inside the pipes with outside zinc and bittuminous coating.Rates are ex factoryexcluding transpotion, taxes & duties, Contractor profit & overhead charges etc.Based on WPI 100.3 of May 2020(Including cost of one no. gasket for each pipe) |
| 459 | Note :(i)The rates are exfactory but exclusive of GST & C.P. based on WPI 100.3 of May 2020. (ii) Price variation of DI pipe will be calculated based on prevalling WPI. |
| 460 | Size class - K7 |
| 461 | 100 mm dia |
| 462 | 150 mm dia |
| 463 | 200 mm dia |
| 464 | 250 mm dia |
| 465 | 300 mm dia |
| 466 | 350 mm dia |
| 467 | 400 mm dia |
| 468 | 450 mm dia |
| 469 | 500 mm dia |
| 470 | 600 mm dia |
| 471 | 700 mm dia |
| 472 | 750 mm dia |
| 473 | 800 mm dia |
| 474 | 900 mm dia |
| 475 | 1000 mm dia |
| 476 | 1100 mm dia |
| 477 | 1200 mm dia |
| 478 | Size Class - K9 |
| 479 | 100 mm dia |
| 480 | 150 mm dia |
| 481 | 200 mm dia |
| 482 | 250 mm dia |
| 483 | 300 mm dia |
| 484 | 350 mm dia |
| 485 | 400 mm dia |
| 486 | 450 mm dia |
| 487 | 500 mm dia |
| 488 | 600 mm dia |
| 489 | 700 mm dia |
| 490 | 750 mm dia |
| 491 | 800 mm dia |
| 492 | 900 mm dia |
| 493 | 1000 mm dia |
| 494 | 1100 mm dia |
| 495 | 1200 mm dia |
| 496 | M1027Providing and Supplying of ISI standardDI specials & fitting with sealing rubber gasket of SBR, complete with cast Iron follower gland & MS nut bolts coated or otherwise protected from rusting and suitable for DI pipescomplete as per IS-9523 class K-12 ( ex factoryrates ) inspection charge transportation ,CP extra. |
| 497 | Socketed |
| 498 | 100 -150 mm dia |
| 499 | 200-300mm dia |
| 500 | 350-450mm dia |
| 501 | 500-600mm dia |
| 502 | 700 mm dia |
| 503 | 800 mm dia |
| 504 | 900 mm dia |
| 505 | 1000 mm dia |
| 506 | 1100 mm dia |
| 507 | 1200 mm dia |
| 508 | Flanged |
| 509 | 100 -150 mm dia |
| 510 | 200-300 mm dia |
| 511 | 350-450mm dia |
| 512 | 500-600mm dia |
| 513 | 700 mm dia |
| 514 | 800 mm dia |
| 515 | 900 mm dia |
| 516 | 1000 mm dia |
| 517 | 1100 mm dia |
| 518 | 1200 mm dia |
| 519 | M1028Providing and supplying in standard lengths High Density Polyethylene Pipe (HDPE Pipe) confirming to IS 4984-4984/14151/12786/13488 (Latest Revision with necessary jointing materials like mechanical connector i.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joints excluding coupler/specials and taxes). |
| 520 | HDPE pipe of materials grade PE80-PN06 (dia in mm) |
| 521 | 25 mm dia |
| 522 | 32 mm dia |
| 523 | 40 mm dia |
| 524 | 50 mm dia |
| 525 | 63 mm dia |
| 526 | 75 mm dia |
| 527 | 90 mm dia |
| 528 | 110 mm dia |
| 529 | 125 mm dia |
| 530 | 140 mm dia |
| 531 | 160 mm dia |
| 532 | 180 mm dia |
| 533 | 200 mm dia |
| 534 | 225 mm dia |
| 535 | 250 mm dia |
| 536 | 280 mm dia |
| 537 | 315 mm dia |
| 538 | 355 mm dia |
| 539 | 400 mm dia |
| 540 | 450 mm dia |
| 541 | 500 mm dia |
| 542 | HDPE pipe of materials grade PE80-PN10 (dia in mm) |
| 543 | 25 mm dia |
| 544 | 32 mm dia |
| 545 | 40 mm dia |
| 546 | 50 mm dia |
| 547 | 63 mm dia |
| 548 | 75 mm dia |
| 549 | 90 mm dia |
| 550 | 110 mm dia |
| 551 | 125 mm dia |
| 552 | 140 mm dia |
| 553 | 160 mm dia |
| 554 | 180 mm dia |
| 555 | 200 mm dia |
| 556 | 225 mm dia |
| 557 | 250 mm dia |
| 558 | 280 mm dia |
| 559 | 315 mm dia |
| 560 | 355 mm dia |
| 561 | 400 mm dia |
| 562 | 450 mm dia |
| 563 | 500 mm dia |
| 564 | M1029Providing and supplying in standard lengths High Density Polyethylene Pipe (HDPE Pipe) 25mm to 500mm dia confirming to IS 4984-4984/14151/12786/13488 (Latest Revision with necessary jointing materials like mechanical connector i.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joints excluding coupler/specials and taxes. |
| 565 | HDPE pipe of materials grade PE100-PN06 (dia in mm) |
| 566 | 25 mm dia |
| 567 | 32 mm dia |
| 568 | 40 mm dia |
| 569 | 50 mm dia |
| 570 | 63 mm dia |
| 571 | 75 mm dia |
| 572 | 90 mm dia |
| 573 | 110 mm dia |
| 574 | 125 mm dia |
| 575 | 140 mm dia |
| 576 | 160 mm dia |
| 577 | 180 mm dia |
| 578 | 200 mm dia |
| 579 | 225 mm dia |
| 580 | 250 mm dia |
| 581 | 280 mm dia |
| 582 | 315 mm dia |
| 583 | 355 mm dia |
| 584 | 400 mm dia |
| 585 | 450 mm dia |
| 586 | 500 mm dia |
| 587 | HDPE pipe of materials grade PE100-PN10 (dia in mm) |
| 588 | 25 mm dia |
| 589 | 32 mm dia |
| 590 | 40 mm dia |
| 591 | 50 mm dia |
| 592 | 63 mm dia |
| 593 | 75 mm dia |
| 594 | 90 mm dia |
| 595 | 110 mm dia |
| 596 | 125 mm dia |
| 597 | 140 mm dia |
| 598 | 160 mm dia |
| 599 | 180 mm dia |
| 600 | 200 mm dia |
| 601 | 225 mm dia |
| 602 | 250 mm dia |
| 603 | 280 mm dia |
| 604 | 315 mm dia |
| 605 | 355 mm dia |
| 606 | 400 mm dia |
| 607 | 450 mm dia |
| 608 | 500 mm dia |
| 609 | M1034GPT/HYGPT :Drilling by Rotary drill machine of size 300mm & 400mm dia with T.C. drill bit for tubewells in all kinds of soil including moorum, hard soil, soil mixed with pebbles, shingles, compacted soil, clay, soft and decomposed rock etc, up to 60 meters depth including reaming to facilitate smooth lowering of casing pipe etc. as per specification and direction of E/I (Basic rates) |
| 610 | 300 mm dia for GPT |
| 611 | 400 mm dia for HYGPT |
| 612 | M1035HYDT : Cost of drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site (Basic rates) |
| 613 | From 0-50 meter |
| 614 | From 51-125 meter |
| 615 | M1036MS Pipe |
| 616 | Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc . all complete job(Basic rates) |
| 617 | Supplying all materia;ls, labours, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job(Basic rates) |
| 618 | M1037DT :Basic rates for 125/115 mm dia Drilled Tube-well for drilling in all kinds of soil and rock for installation of hand pump with DTH rig Machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and dirrection of Engineer Incharge (Basic rates) |
| 619 | Drillig upto 30 mtr Depth below G. L. in Rural Area |
| 620 | Drilling beyond 31 mtr upto 60 mtr below G. L. in Rural Area |
| 621 | M1038Trenchless |
| 622 | Installation of product pipe by manual pipe jacking method including making of entry and exit pits all related civil works like excavation ,shoring / strutting etc manual shielded excation ,lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering -in - charge all complete exept the cost of the pipe average cover of 1.5 depth below GI ( upto 100 meter installation length ) |
| 623 | from 900 mm to 1000 mm dia |
| 624 | In Soft soil |
| 625 | In Hard soil |
| 626 | In sandy Soil |
| 627 | In Stone Soil |
| 628 | from 1000 mm to 1200 mm dia |
| 629 | In Soft soil |
| 630 | In Hard soil |
| 631 | In sandy Soil |
| 632 | In Stone Soil |
| 633 | Above 1200 mm to 1500 mm dia |
| 634 | In Soft soil |
| 635 | In Hard soil |
| 636 | In sandy Soil |
| 637 | In Stone Soil |
| 638 | Installation of product pipe by Auger Boring methodincluding making of entry and exit pits all related civil works like excavation ,shoring/strutting etc shielded excavation ,through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering -in - charge all complete exept the cost of the pipe average cover of 1.5 depth below GI ( upto 100 meter installation length ) |
| 639 | upto 300 mm dia |
| 640 | In Soft soil |
| 641 | In Hard soil |
| 642 | In sandy Soil |
| 643 | In Stone Soil |
| 644 | Above300 mm to 450 mm dia |
| 645 | In Soft soil |
| 646 | In Hard soil |
| 647 | In sandy Soil |
| 648 | In Stone Soil |
| 649 | Above 450 mm to 600 mm dia |
| 650 | In Soft soil |
| 651 | In Hard soil |
| 652 | In sandy Soil |
| 653 | In Stone Soil |
| 654 | Above 600 mm to 900 mm dia |
| 655 | In Soft soil |
| 656 | In Hard soil |
| 657 | In sandy Soil |
| 658 | In Stone Soil |
| 659 | Installation of product pipe by Guided Auger Boring methodincluding making of entry and exit pits all related civil works like excavation ,shoring/strutting etc shielded excavation ,through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering -in - charge all complete exept the cost of the pipe average cover of 1.5 depth below GI ( upto 100 meter installation length ) |
| 660 | upto 300 mm dia |
| 661 | In Soft soil |
| 662 | In Hard soil |
| 663 | In sandy Soil |
| 664 | In Stone Soil |
| 665 | Above300 mm to 450 mm dia |
| 666 | In Soft soil |
| 667 | In Hard soil |
| 668 | In sandy Soil |
| 669 | In Stone Soil |
| 670 | Above 450 mm to 600 mm dia |
| 671 | In Soft soil |
| 672 | In Hard soil |
| 673 | In sandy Soil |
| 674 | In Stone Soil |
| 675 | Above 600 mm to 900 mm dia |
| 676 | In Soft soil |
| 677 | In Hard soil |
| 678 | In sandy Soil |
| 679 | In Stone Soil |
| 680 | M1039Providing and Supplying ISI Mark CI/ D/F reflux valves( Non return Valves ) of following dia inspection charges unloading from railway wagon ,loading into truck transportation upto department stores / site unloading stacking etc. complete reflux valve as per IS 5312 Part I (1984) |
| 681 | Without byepass arrangement - PN-1 |
| 682 | 50 MM |
| 683 | 65 MM |
| 684 | 80 MM |
| 685 | 100 MM |
| 686 | 125 MM |
| 687 | 150 MM |
| 688 | 200 MM |
| 689 | 250 MM |
| 690 | 300 MM |
| 691 | 350 MM |
| 692 | 400 MM |
| 693 | 450 MM |
| 694 | 500 MM |
| 695 | 600 MM |
| 696 | 700 MM |
| 697 | 750 MM |
| 698 | 800 MM |
| 699 | 900 MM |
| 700 | 1000 MM |
| 701 | 1100 MM |
| 702 | 1200 MM |
| 703 | With byepass arrangement - PN-1 |
| 704 | 50 MM |
| 705 | 65 MM |
| 706 | 80 MM |
| 707 | 100 MM |
| 708 | 125 MM |
| 709 | 150 MM |
| 710 | 200 MM |
| 711 | 250 MM |
| 712 | 300 MM |
| 713 | 350 MM |
| 714 | 400 MM |
| 715 | 450 MM |
| 716 | 500 MM |
| 717 | 600 MM |
| 718 | 700 MM |
| 719 | 750 MM |
| 720 | 800 MM |
| 721 | 900 MM |
| 722 | 1000 MM |
| 723 | 1100 MM |
| 724 | 1200 MM |
| 725 | Without byepass arrangement - PN-1.6 |
| 726 | 50 MM |
| 727 | 65 MM |
| 728 | 80 MM |
| 729 | 100 MM |
| 730 | 125 MM |
| 731 | 150 MM |
| 732 | 200 MM |
| 733 | 250 MM |
| 734 | 300 MM |
| 735 | 350 MM |
| 736 | 400 MM |
| 737 | 450 MM |
| 738 | 500 MM |
| 739 | 600 MM |
| 740 | With byepass arrangement - PN-1.6 |
| 741 | 50 MM |
| 742 | 65 MM |
| 743 | 80 MM |
| 744 | 100 MM |
| 745 | 125 MM |
| 746 | 150 MM |
| 747 | 200 MM |
| 748 | 250 MM |
| 749 | 300 MM |
| 750 | 350 MM |
| 751 | 400 MM |
| 752 | 450 MM |
| 753 | 500 MM |
| 754 | 600 MM |
| 755 | Providing double flange sluice valve ( Size 50 mm to 1200 mm ) confirming for IS - 2906 / 14846 including worn gear arrangements as per test pressure stailess steel spindle , caps transportation etc. all complete . |
| 756 | With byepass arrangement - PN-1 |
| 757 | 50 MM |
| 758 | 65 MM |
| 759 | 80 MM |
| 760 | 100 MM |
| 761 | 125 MM |
| 762 | 150 MM |
| 763 | 200 MM |
| 764 | 250 MM |
| 765 | 300 MM |
| 766 | 350 MM |
| 767 | 400 MM |
| 768 | 450 MM |
| 769 | 500 MM |
| 770 | 600 MM |
| 771 | 700MM |
| 772 | 750 MM |
| 773 | 800 MM |
| 774 | 900 MM |
| 775 | 1000 MM |
| 776 | 1100 MM |
| 777 | 1200MM |
| 778 | Without byepass arrangement - PN-1 |
| 779 | 50 MM |
| 780 | 65 MM |
| 781 | 80 MM |
| 782 | 100 MM |
| 783 | 125 MM |
| 784 | 150 MM |
| 785 | 200 MM |
| 786 | 250 MM |
| 787 | 300 MM |
| 788 | 350 MM |
| 789 | 400 MM |
| 790 | 450 MM |
| 791 | 500 MM |
| 792 | 600 MM |
| 793 | 700MM |
| 794 | 750 MM |
| 795 | 800 MM |
| 796 | 900 MM |
| 797 | 1000 MM |
| 798 | 1100 MM |
| 799 | 1200MM |
| 800 | Providing double flange sluice valve confirming for IS - 2906 / 14846 including worn gearas per test pressure stailess steel spindle , caps transportation etc. all complete FOR Rateincluding all taxes . . |
| 801 | Without byepass arrangement - PN-1.6 |
| 802 | 50 MM |
| 803 | 65 MM |
| 804 | 80 MM |
| 805 | 100 MM |
| 806 | 125 MM |
| 807 | 150 MM |
| 808 | 200 MM |
| 809 | 250 MM |
| 810 | 300 MM |
| 811 | 350 MM |
| 812 | 400 MM |
| 813 | 450 MM |
| 814 | 500 MM |
| 815 | 600 MM |
| 816 | 700MM |
| 817 | 750 MM |
| 818 | 800 MM |
| 819 | 900 MM |
| 820 | 1000 MM |
| 821 | 1100 MM |
| 822 | 1200MM |
| 823 | With byepass arrangement - PN-1.6 |
| 824 | 50 MM |
| 825 | 65 MM |
| 826 | 80 MM |
| 827 | 100 MM |
| 828 | 125 MM |
| 829 | 150 MM |
| 830 | 200 MM |
| 831 | 250 MM |
| 832 | 300 MM |
| 833 | 350 MM |
| 834 | 400 MM |
| 835 | 450 MM |
| 836 | 500 MM |
| 837 | 600 MM |
| 838 | M1040Design and Supply of V -wire screen laterals suitable for infiltration Galleryas per site condition and detail provided End connection suitable flange excluding taxes and transportation . |
| 839 | Dia - 06 inch ( 150 mm ) |
| 840 | ID - 153 mm OD -167 mm |
| 841 | Screen thickness - 07 mm |
| 842 | Slot - 1.00 mm |
| 843 | MOC - LowCarbon Galvenised steel |
| 844 | Length - 5 mtr. |
| 845 | Dia - 08 inch ( 200 mm ) |
| 846 | ID - 205 mm OD -221mm |
| 847 | Screen thickness - 08 mm |
| 848 | Slot - 1.00 mm |
| 849 | MOC - LowCarbon Galvenised steel |
| 850 | Length - 5 mtr. |
| 851 | Dia - 10 inch ( 250 mm ) |
| 852 | ID - 256 mm OD -276mm |
| 853 | Screen thickness - 10 mm |
| 854 | Slot - 1.00 mm |
| 855 | MOC - LowCarbon Galvenised steel |
| 856 | Length - 5 mtr. |
| 857 | Dia - 12 inch ( 300 mm ) |
| 858 | ID - 306 mm OD -326 mm |
| 859 | Screen thickness - 10 mm |
| 860 | Slot - 1.00 mm |
| 861 | MOC - LowCarbon Galvenised steel |
| 862 | Length - 5 mtr. |
| 863 | Dia - 14 inch ( 350 mm ) |
| 864 | ID - 338 mm OD -363 mm |
| 865 | Screen thickness - 12.5 mm |
| 866 | Slot - 1.00 mm |
| 867 | MOC - LowCarbon Galvenised steel |
| 868 | Length - 5 mtr. |
| 869 | M1041Supplying all materials, labours, equipments for lowering 125mm dia blue UPVC casing pipe as casing for protecting the sides from falling during the process of drilling all complete including carriage of materials to work site(Basic Rate). |
| 870 | M1042Supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per dirction E/I (Basic Rate). |
| 871 | M1043Supplying labour cement and calcium chloride or bentonite solution and equipments for grouting the casing pipe after lowering in the bore including carriage of materials to work site etc. all complete as per specification & direction of E/I (Basic Rate). |
| 872 | M1044Supplying labour and equipments including 125mm dia G.I. Cap and fitting and fixing over the casing pipe of tube well properly and taking it out as per direction E/I (The cap will be the property of department) (Basic Rate). |
| 873 | M1045Supplying all materials, labours, equipments for constructing P.C.C. (1:2:4) circular platform around drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning over exposed surface as per UNICEF design, etc. all complete including carriage of materials (Basic Rate). |
| 874 | M1046Supplying all materials, labours and equipments for constructing P.C.C. (1:2:4) drain as per UNICEF design etc. all complete including carriage of materials (Basic Rate). |
| 875 | M1047Supplying extra Deep well Hand Pump Complete sets with Cylinder Assembly & Connecting Rod (12 Pcs) as per IS : 15500 Part-2/2004(Basic Rate). |
| 876 | M1048Supply of 200mm dia x 3.00m long UPVC casing pipe conferming to IS : 12818: 2016 (CML No. 5543459) latest revision including carrigae(Basic Rate). |
| 877 | M1049Supply of 200mm dia ribbed Screen pipe conferming toIS : 12818: 2016 (CML No. 5543459) latest revision including carrigae(Basic Rate). |
| 878 | M1050Supply of 125mm dia ribbed Screen pipe conferming toIS : 12818: 2016 (CML No. 5543459) latest revision including carrigae(Basic Rate). |
| 879 | M1051Supplying all tools, equipments and labour and lowering 32 mm dia medium quality G.I. pipe in drilled tube well in 3 Mtrs. Length all complete as per dirction E/I including carriage of materials (Basic Rate). |
| 880 | M1052Supplying all tools, Labour for fitting and fixing deep well cylinder with necessary connecting rod complete job as per specification & direction of E/I including carriage of materials (Basic Rate). |
| 881 | M1053Supplying all materials, labours and fixing India mark II Hand Pump with all accessories all complete job as per direction of E/I including carriage of materials(Basic Rate). |
| 882 | M1054Design, Supply, Installation testing & Commissioning of packaged water treatment plants (Unconventional type) of different capacity with (20 hours operation) comprising of lamella clarifier, Static Mixture Flocculation Tank (SMET), Multi grade filter (MGF) with best quality filter media, Lime/ coagulant/polymer dosing system hypo chloride dosing system, Raw water feed pump/clear water transfer pump (either or), sludge transfer cum recirculation pump, filter feed pump & back wash pump including all fitting like valve and other special fittings and electrical power supply to the different supplied units with MCB panel internal electrification with lighting arrangement with treatment plant site with provision of chemical storage and water testing boratoryfacility should be from a reputed manufacturer/ authorized distribution / authorized dealer conforming to relevant IS codes and certified by ISO-9001-2008 & 14001, It also include cost of civil foundation, including clarified water tank internal connecting pipe line from Raw Water inlet to CWR and applying internal epoxy paint on the supply equipment All the prices are exclusive of GST, Allied structure/items which are site specific such as external electrification, approach road, foot Bridge, cofferdam, compound wall, SCADA and automation, CWR pumps etc are to be considered extra. |
| 883 | 0.2 MLD |
| 884 | 0.3 MLD |
| 885 | 0.4 MLD |
| 886 | 0.5 MLD |
| 887 | 0.6 MLD |
