Repair Of 77 Nos. Lsq Quarters At Reserve Police Line Udaipur District Udaipur
Tender Value
60.34 Lakhs
Estimated cost
Bid Submission
10 May 2022
0 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
udaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Of 77 Nos. Lsq Quarters At Reserve Police Line Udaipur District Udaipur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches or drainsincluding dressing of sides and ramming of bottoms, liftup to 1.5 Mtr, including taking out the excavated soil anddepositing and refilling of jhiri with watering & rammingand disposal of surplus excavated soil as directed with inlead of 50 mtr. All kinds of soil. |
| 2 | Providing and laying in position cement concrete includingcuring compaction etc . Complete in specified gradeexcluding the cost of centering and shuttering. All work upto plinth level using crusher broken aggregate1:4:8 ( 1 cement : 4 coarse sand : 8 graded stoneaggregate 40 mm nominal size) |
| 3 | Random rubble stone masonary for foundation and plinth incement sand mortar above 30 cm thick wall in: Cement mortar 1:6 ( 1 Cement : 6 Sand ) |
| 4 | Providing and laying in position cement concrete includingcuring compaction etc . Complete in specified gradeexcluding the cost of centering and shuttering. All work upto plinth level using crusher broken aggregate M20 grade Nominal Mix (with graded stone aggregate20mm nominal size) |
| 5 | Providing and fixing of precast concrete interlocking block ofM 30 grade manufactured from fully computerised automaticstationery hydraulic vibropressed machine and fullycomputerised automatic batching plant of class A1/A2 as perBS 6717:2001 with rubber mould technology includingpainting with lacker polising. The CC interlocking pavingblocks be laid on average 50 mm. thick bed of coarse sandand the joint on is to be filled with fine sand. Layingprocedure on compacted sub-base as defined. Complete jobis to be executed as per the instruction of Engineer incharge.The rates to be inclusive of all lead, Lifts and taxes Generalspecification of blocks:1) Shape as defined by Engineer incharge2) Tensile splitting strength and braking load as per BS 60mm thick interlocking blocks6717:20013) Color : Grey cement natural colour.4) Variation in dimension : Less than 1.6 mm.5) Variation in thickness : Less than 3.2 mm.6) Abrasion : As per BS : 6717:2001 |
| 6 | Providing and fixing steel gate grating and grills made ofangles, tees, square bars or flats black pipe with holdfastand fittings complete as per deign and drawing includingcutting welding and fabrication with priming coat of red oxide. |
| 7 | Steel work in built up tubular trusses including cutting,hoisting fixing in position and applying a priming coat ofapproved steel primer, welded and bolted including specialshaped washers etc. complete above plinth level upto 4.5mtr height. |
| 8 | Providing corrugated G.I. sheet roofing fixed with G.I. J orL hooks bolts and nuts 8mm diameter with bitumen andG.I. limpet washers or with G.I. limpet washers filled withwhite lead and including a coat of approved steel primerand two coat of approved paint on over lapping of sheetcomplete (upto a pitch of 60 degree) & excluding the costof purlins rafters and truses, for class of sheets.1.00mm thick |
| 9 | Providing and laying damp-proof course with cement concretegrade M-150 (1:2:4) mortar prepared with 1 % solution of waterproofcompound, including two coats of hot blown bitumen ( 2 Kg.per sqm) complete as per specification with glass strip 3 mm thickat a distance of 1 m interval:50 mm thick |
| 10 | Plaster on new surface on wall in cement sand mortar 1:4including raking of joints etc. complete fine finish: 25mm thick |
| 11 | Finishing with neat cement (punning) |
| 12 | Repair to damaged RCC slabs, beams and columns etc for strengtheingwith cement mortar 1 : 3 in following stepsi) Choping losse and cracked concrete to required depth, cleaning theexposed surface of steel and concrete with wire brush and sand papering ,cleaning of concrete surface with water as necessary and getting dried.ii) Applying Epoxy primer on the exposed steel bars.iii) Applying Epoxy hardener and resin mix (as per manufectured\"sspecification) on concrete and steel bars with brush.iv)Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface andallow it to dry for one day.v) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mmcomplete.vi) Cure the plastered surface for 15 days |
| 13 | Providing and laying in position cement concrete includingcuring compaction etc . Complete in specified gradeexcluding the cost of centering and shuttering. All work upto plinth level using crusher broken aggregateM15 grade Nominal Mix ( with graded stone aggregate20mm nominal size) |
| 14 | Polished Blue Kota stone flooring skirting laid over 20mmthick base of CM 1:4 and jointed with gray cement slurry tomatch the shade of the slab including rubbing and polishingcompleteFor area of each slab From 2001Sq.cm to 5000 sq.cm 25 mm thick slab |
| 15 | Providing and fixing steel glazed doors windows andventilator shutters of standard rolled steel section jointsmitred and welded with steel lugs 13x3mm, 10cm, longembedded in cement concrete block 15x10x10cm of 1:3:6 ( 1cement : 3 coarse sand : 6 graded stone aggregate 20mmnominal size) or with wooden plugs and screws or rawl plugsand screws with fixing clips or with bolts and nuts as requiredincluding providing and fixing of plain glass panes 4mm thickwith coper glazing clips and special metal sash putty ofapproved make or metal beading with screws completeincluding priming coat of approval steel primer excluding thecost of metal beading and other fitting except necessaryhings of pivots steel handles peg stay etc. as required. Partly fixed and partly openable (fixed area not to exceed 33%). |
| 16 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20 x 3mm with suitable screw at not exceeding 150mm distance |
| 17 | Providing and fixing square bars or other flat welded towindow ventilatiors etc. |
| 18 | Renewing glass panes, with putty and nails wherever necessary : 4 mm thick plain glass panes |
| 19 | Providing and 30mm thick factory made solid panel PVC Door shutterconsisting of frame made out of M.S. tubes of 19 gauge thickness andsize of 19mm for styles & 15mm x15mm for top and bottom rails M.S.frame shall have a coat of steel primers of approved make andmanufacture M.S. frame shall be covered with 5mm thick heat mouldedPVC \"C\" channel of size 30x50mm forming styles and 5mm thick 75mmwide PVC sheets for top rail, lock rail and bottom rail on either side &10mm (5mmx2) thick, 20mm wide cross sheets as gap insert for top rail& bottom rail, panelling of 5mm thick PVC sheet to be fitted in the M.S.frame welded /sealed to the styles & rail with 30mm wide x 5mm thickPVC sheet beading on either side the jointed together with solventcement adhesive An additional 5mm thick PVC strip of 20mm width is tobe stuck on the interior side of the \"C\" channel using PVC solventcement adhesive etc. complete as per direction of engineer in chargemanufactures specifaction & drawing (For W.C. & Bathroom, shutters)including all door fittings such as hinges,L-drop,Handles, locking bolts etc.as per approved of engineer in charge |
| 20 | Providing batta (gola) 75mm x 75mm in cement concrete(1:2:4) including finishing with cement mortar 1:3 as perstandard design. |
| 21 | Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffoldingColour change |
| 22 | Finishing wall with vinyl satin finish coating paints of approvedshade with two or more coats including sand papering,priming coat, making surface with putty or plaster of paris etc.complete in all respects.On old surface |
| 23 | Painting with enamel paint of approved brand andmanufacture to give an even shade: One or more coats on old work |
| 24 | P & F GI pipes ( Internal works ) with GI fittings excludingUnion (IS:1239 mark) and MS clamps, including cuttingand making good the wall and floors.(a) Exposed on wall |
| 25 | 15mm dia Nominal BoreB\" Class |
| 26 | 25mm dia Nominal BoreB\" Class |
| 27 | P & F PVC Storage Tank (IS : 12701 marked indicatingthe BIS license No), of approved make with cover, 25mmdia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipewith plug & socket, including making connection etc.,complete of approved design: 1000 litres capacity |
| 28 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trapincluding cutting and making good the wall and floor. Size 580 x 440 mm |
| 29 | Labour charges for removing W.C. pan (any type) of all sized withcare including all necessary fittings P or S trap. |
| 30 | Providing stone slab covering over drains including fillingof joints in cement sand mortar 1:3 with 35mm thickcement concrete flooring 1:2:4 mix complete with goodfinish with : Stone slab 40 to 50 mm thick average |
| 31 | Brick masonary in foundation and plinthwith bricks of classdesignation 75 inCement mortar 1:6 ( 1 cement : 6 coarse sand ) Add extra over item no 5.1 for brick work in super structureup to third storey |
| 32 | Plaster on new surface on wall in cement sand mortar 1:3including raking of joints etc. complete fine finish12mm thickAdd extra item no. 12.1 to 12.12 for plaster done over ceilling |
| 33 | Plaster on new surface on wall in cement sand mortar 1:4including raking of joints etc. complete fine finish: 25mm thickAdd extra over item no. 12.1 to 12.12 for repairs to plasterincluding cutting the patch in a uniform shape rackingpreparing surface of wall complete in all respect: |
| 34 | Grading for roof water proofing treatment with :Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) with water proofingcompound as per manufacturs\"s specification |
| 35 | Providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100)grade) and joints filled with cement mortar 1 :2 (1 cement:2 marbledust mixed with water proofing compund all complete as per directionof Engineer-in-charge. |
| 36 | Providing and laying damp-proof course with cement concretegrade M-150 (1:2:4) mortar prepared with 1 % solution of waterproofcompound, including two coats of hot blown bitumen ( 2 Kg.per sqm) complete as per specification with glass strip 3 mm thickat a distance of 1 m interval: 50 mm thick |
| 37 | Construction of septic Tank in all types of soil with 40 Cm.thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mmthick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50mm thick stone partition walls, 20 mm thick plaster in CM 1:6finished with neat floating cement, 4 Nos C.I foot rests ofapproved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approveddrawing including disposal of surplus earth within a lead of 50mtr:- Size 400x140x150 cms (for 50 users) |
| 38 | Construction of chamber in all type of soil with 300 mm thickmasonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation,20mm thick insider plaster in Cm 1:6, finished with floatingneat cement, 50mm thick M-15 grade C.C. flooring ,earthwork etc. complete as per design including disposal ofsurplus earth within a lead of 50 mtr. |
| 39 | do- size 600 x 450mm depth upto 0.5 M Cement cover withframe |
| 40 | do- size 600 x 450mm depth upto 0.5 M Cement cover withframe |
| 41 | 110mm dia |
| 42 | 160mm dia |
| 43 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mmnominal size) upto haunches of S.W. pipes including 150 mmthick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.)concrete width to be reduced from width W at center of pipeto `0` at top of pipe. (Excluding cost of pipe) 150mm dia S.W. pipe |
AI Tender Summary
Tender Timeline
Apr 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender