Housing Urban and Rular Development Government Departments Closing in 0 days TDR #31919266

Renewal Work By P.C. In Km. 67, 68 And 69 Of Mayali-Guptkashi (Sh-37) Motor Road In Ukhimath Block Of District Rudraprayag Under Annual Repair Renewal Work By P.C. In Km. 67, 68 And 69 Of Mayali-Guptkashi (Sh-37) Motor Road In Ukhimath

Issued by Government Departments · ukhimath, Uttarakhand
Tender Value
39.80 Lakhs
Estimated cost
Bid Submission
28 Apr 2022
0 days left
EMD
87000
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
ukhimath → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Renewal Work By P.C. In Km. 67, 68 And 69 Of Mayali-Guptkashi (Sh-37) Motor Road In Ukhimath Block Of District Rudraprayag Under Annual Repair Renewal Work By P.C. In Km. 67, 68 And 69 Of Mayali-Guptkashi (Sh-37) Motor Road In Ukhimath

BOQ

Name of Work: Renewal Work by Premix Carpet in Km.67, 68 & 69 of Mayali-Guptkashi (SH-37)Motor Road in Ukhimath Block of District Rudraprayag Under Annual Repair
Sl. No. Item Description
1WBM Grading 3 by Manual Means.Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
2Prime Coat Low porosity. Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MORD Technical Specification Clause 502.
3Tack coat using VG-10 grade bitumen over dry and hungry bituminous surfaces or over granular surfaces treated with primer @0.40 kg/sqm.
420mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder VG-10. Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.
5Seal Coat Type B.Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510. Using Bitumen (VG-10).
6Hill Side Drain Clearance(Removal of earth from the choked hill side drain and disposing it on the valley side manually).
7Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203, P.C.C grade M 15, Nominal mix (1:2.5:5). (Hand Mixing). For Parapets.
8Road DelineatorsProviding and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have sufficient arrangement to make the reflective sheets vandal-proof. Including all test report and warranties as per IRC 67 and IRC 79.

AI Tender Summary

OUR REF NO 31919266
AUTHORITY Government Departments
TENDER VALUE 39.80 Lakhs
LAST DATE 28-04-2022
Authority
Authority Name Public Works Department
Work Description Renewal Work By P.C. In Km. 67, 68 And 69 Of Mayali-Guptkashi (Sh-37) Motor Road In Ukhimath Block Of District Rudraprayag Under Annual Repair Renewal Work By P.C. In Km. 67, 68 And 69 Of Mayali-Guptkashi (Sh-37) Motor Road In Ukhimath
Basic Detail
Tender No 839/3AC, Date 18-04-2022_1
Bidding Type Tender
Location
City ukhimath
State Uttarakhand
Key Dates
Publish Date 21 Apr 2022
Submission Date 28 Apr 2022
Open Date 28 Apr 2022
Finance
Tender Value 39.80 Lakhs
Tender Fee 4720
EMD 87000
Exemption Not Available
Document List
abe3c5a9-16c5-4894-8ab3-c8313e67f310.html
BOQ_51780.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Apr 21, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Apr 28, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Apr 28, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

abe3c5a9-16c5-4894-8ab3-c8313e67f310.html

xls

BOQ_51780.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender