|
| 1 | BOQ1 |
| 2 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter.All kinds of soil. |
| 3 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in : Cement Mortar 1:6 (1-Cement:6-Sand). |
| 4 | Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1 % solution of water-proof compound) including two coats of hot blown bitumen (2 Kg. Per Sqm.) complete as per specification with glass strip 3 mm thick at a distance of 1 Meter interval : 50 mm thick. |
| 5 | Random Rubble stone masonary for super structure above plinth level one storey height walls upto 30 cm and less thickness in Cement Mortar1:6 (1- cement : 6 Sand). |
| 6 | Providing & fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per specification : 50mm |
| 7 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 8 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’Commercial veneer both side, 30mm thick shutter |
| 9 | Stone slab roofing on ground for with fine grained stone slab from approved quarry with 150 mm top lime terracing with Hemp, Methi, Lime, Sandla with Gur & Gugal (as per JODHPUR PRACTICE) including ralthal, filling of joints of parapet and slab on both sides in cement sand mortar 1:4 lime batta (gola) 75mmx75mm Sandla and ceiling plaster in CM 1:4 with wire and nails etc. complete as per specification for span upto 2.00 mtr. |
| 10 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick. |
| 11 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:New work (two or more coats) over and including scrapping and priming coat with cement primer. |
| 12 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:Old work (one or more coats) including scrapping surface and necessary repairs.Colour change |
| 13 | Painting with weather coat paint (Asin paint/ I.C.I./Berger or eq. ISI make paint) two or more coat to give an even shade on Newwork. |
| 14 | Painting with weather coat paint (Asin paint/ I.C.I./Berger or eq. ISI make paint) two or more coat to give an even shade on old work |
| 15 | Painting with enamel paint of approved brand and manufacture to give an even shade:One or more coats on New work. |
| 16 | Painting with enamel paint of approved brand and manufacture to give an even shade:One or more coats on old work. |
| 17 | Grading roof water proofing treatment with : Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size). |
| 18 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. |
| 19 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level.(a) 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size(B-3/3.2.7) |
| 20 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level(b) 1:1.5:3 (1Cement :1.5 Course Sand :3 Graded stone aggregate 20 mm nominal size |
| 21 | Cutting of consjoint / longitudinal joint 4 to 6mm wide & 75 to 100 mm deep using mechanical concrete cutter including cost of diamond bit cutting wheel and filling of bitumen sealing compound in groove including cost of sealing compound. |
| 22 | Construction of granular sub base by providing well graded material spreading in uniform layers with tractor mount grader on prepared surface mixing by mix in place method with rotarator at one and compactingwith smoth wheel roller to achives the desired density complete as per morth specification clause 401 By mix place method for grading III metrial. |
| 23 | S & F machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges :Kota stone 25 to 30 mm thick. |
| 24 | P & F 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS: 13753 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile or Roffe make) & finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete including the cost of cement mortar bed 1:4 ( 1 cement ; 4 fine sand ) 20 mm thick. |
| 25 | P & F 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles ISI marked [IS: 13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar).Category-1: Kajaria, Jhonson, Orient,Somani make etc. |
| 26 | Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 Mtr. height in R.S. Joists flats, tees, angles and channels. |
| 27 | Providing & fixing steel glazed doors, windows and ventilators shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of pin headed glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. windows side hug. |
| 28 | B-9/9.32 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance. |
| 29 | Providing and fixing Square bars or other flat welded to window, ventilators etc. |
| 30 | P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : Size 530x410mm. |
| 31 | P & F Flush Cock/Flush Valve (IS:9758 Mark) or WC of approved quality make : Brass / Gun metal Half-turn wt. 1 Kg. of approved quality / make, 25 mm nominal bore. |
| 32 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 530 mm x 450 mm |
| 33 | P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors;(1) 15 mm dia nominal bore. |
| 34 | P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors;(2) 25 mm dia nominal bore. |
| 35 | (b) Concealed pipe in wall incl. with anticorrosive bitumen paint. 15 mm dia nominal bore. |
| 36 | P & FG.I. Pipes( External work )withG.I.Fittings ( IS:1239 mark ) including trenching and refillingearth etc.25mm dia nominal bore. \"B\" class. |
| 37 | P & F Ball cock ( IS:1703 mark ) with rod and P.V.C.ball complete:Brass wt.400gm,15mm. |
| 38 | P & F Inlet connection ( Angle valves ) superior quality of approved make for wash basin,Gyser etc.C.P. Inlet connection 15mm brass (IS:8931 marked). |
| 39 | P & F Bib cock ( IS : 8931 mark )superiorquality of approved make : ( a )C.P. Brass bib cock.15mm nominal bore. |
| 40 | P & FFull way valve ( IS:778 mark ) orwheel valve of approved make:-( a ) Gun metal 15mm nominal bore. |
| 41 | P & FFull way valve ( IS:778 mark ) orwheel valve of approved make:-( b ) Gun-metal 25mm nominal bore. |
| 42 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. (a)500 litres capacity. |
| 43 | P & F 15 mm. Dia Connection pipe of approved quality/make: PVC pipe with C.P. Brass nuts up to length 370 mm. |
| 44 | Construction of cement concrete chamber 125mm dia CP brass grating. |
| 45 | P & F Sand-cast Floor trap (Nahni) of (IS:1729 Mark) of approved quality / make with socket down or hinged grating including cutting and making good the floor. Size 100x100 mm. |
| 46 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant 110mm dia |
| 47 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:110mm dia.( a ) Vent cowel. |
| 48 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:110mm dia.( b ) Bend 87.5 |
| 49 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:110mm dia.( c ) Plain Tee. |
| 50 | Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth upto 0.5mtr |
| 51 | Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. Size 240 Cm. dia outside & 240 Cm. depth |
| 52 | Wiring of light point/ fan point/ exhaust fan point/ call bell pointas per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694)and1.5 sq.mmnominalsize FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)in recessed ISI markedMMS ( IS:9537 P - III ) vergin material PVC conduit & it\"s all accessories( J.B. , Bends etc.) , round tiles,18 SWG G.I. box with earth terminal, 6 A switch , 3 pin ceiling rose/ Lamp holder /3 pointConnector, 3.0mmthickISI marked phenoliclaminatedsheet(IS:2036- 1995), Al.alloy/cadmium platedironscrews20mmcupwashersetc.allasperpre approved by Engineer in charge, making connections, testing etc. completeasrequired. Forspecificationofcopper Conductor, PhenolicLaminatedsheet\"s&Electrical/Wiringaccessoriesrefer Chapter E - 04, E - 05 & E - 07 .For additional technical parameters of products/ work, referAnnexure \"A\" attached with this BSR .( a ) Short point ( up to 3 mtr. ) |
| 53 | Wiring of light point/ fan point/ exhaust fan point/ call bell pointas per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694)and1.5 sq.mmnominalsize FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)in recessed ISI markedMMS ( IS:9537 P - III ) vergin material PVC conduit & it\"s all accessories( J.B. , Bends etc.) , round tiles,18 SWG G.I. box with earth terminal, 6 A switch , 3 pin ceiling rose/ Lamp holder /3 pointConnector, 3.0mmthickISI marked phenoliclaminatedsheet(IS:2036- 1995), Al.alloy/cadmium platedironscrews20mmcupwashersetc.allasperpre approved by Engineer in charge, making connections, testing etc. completeasrequired. Forspecificationofcopper Conductor, PhenolicLaminatedsheet\"s&Electrical/Wiringaccessoriesrefer Chapter E - 04, E - 05 & E - 07 .For additional technical parameters of products/ work, referAnnexure \"A\" attached with this BSR ( b ) Medium point ( up to 6 mtr. ) |
| 54 | Wiring of light point/ fan point/ exhaust fan point/ call bell pointas per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694)and1.5 sq.mmnominalsize FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)in recessed ISI markedMMS ( IS:9537 P - III ) vergin material PVC conduit & it\"s all accessories( J.B. , Bends etc.) , round tiles,18 SWG G.I. box with earth terminal, 6 A switch , 3 pin ceiling rose/ Lamp holder /3 pointConnector, 3.0mmthickISI marked phenoliclaminatedsheet(IS:2036- 1995), Al.alloy/cadmium platedironscrews20mmcupwashersetc.allasperpre approved by Engineer in charge, making connections, testing etc. completeasrequired. Forspecificationofcopper Conductor, PhenolicLaminatedsheet\"s&Electrical/Wiringaccessoriesrefer Chapter E - 04, E - 05 & E - 07 .For additional technical parameters of products/ work, referAnnexure \"A\" attached with this BSR ( c) Long point (up to 10 mtr.) |
| 55 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.Group I (a)2 x 2.5 sq. mm. + 1x1.5sqmm |
| 56 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.Group I ( b ) 2 x 4.0 sq.mm + 1x2.5 sq.mm |
| 57 | S&Ffollowingsizes ofISImarked(IS:14927P-II)UPVCcasing capping as per PWD specification for electrical Works along with all accessorieslike coupler, inner, outer, elbow, squarebox,tee,endcapetc.onsurface with screws, expansion fasteners, Allas perpre approvedby Engineer incharge,makingconnections,testingetc.completeas required. For additional technical parameters of products/ work, referAnnexure \"A\" attached with this BSR . 25 mm x12 mm |
| 58 | Providing & Fixing ofISI marked (IS :3854)6 amp. flush type nonmodularswitchasperPWDspecificationforelectrical Works,madeoutfromindustrialgradePolycarbonateorfire resistant ABS material, minimum width of switch toggle ( PUSH PART ) should not less then16 mm, brass terminal & captive screwsincludingcuttingholeintileandmakingconnection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 59 | Providing & Fixing ofof 3 pin 6 amp. flush typenon modular socket as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material,brassterminalwithPorcelainbasedbackcover& captive screws including cutting hole in tile and making connection testing etc. as required.All as per pre approved by Engineerincharge. Foradditionaltechnicalparametersof products/ work, refer Annexure \"A\" attached with this BSR . |
| 60 | Providing & Fixing of IP20 SMD Mid Power LED batten typeintegrated light fixture made from polycarbonate /extruded aluminiumpowdercoated housingwithinbuiltdriver ,Power Consumption of18W/20W ,system lumen efficacy = 120 lm/Watt output,igneternalsurprotectionof2.5KVwithShort&Open circuitprotection,THD<10%,p.f.=0.95,CRI>80,lifetimeof minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption shouldnotmorethanthespecifiedratingandFixtureshallbeof BIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEMmusthaveitsowninhouseNABLlabsetupforalltesting facilitiesforLEDfixtures.(LM79/LM80)certificate/Reportfrom OEMshallbesubmitted.Allasperpreapprovedbyengineerin charge.foeadditionaltechnical parameters of product/work, refer Annexure \"A\" attacheded with this BSR. 4\" LED Tube shape fixture 18/20 W (Polycarbonate Base) |
| 61 | Supplying and Fixingstone Lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 up to 15 cm thick. |
| 62 | Providing and fixing 30 to 40 mm thick stone chajjas in cement sand mortar 1:4 including making gola at junction with wall in cement concrete M-15 grade (1:2:4 nominal mix) drip course. pointing both faces in cm 1:3 with an admixture of pigment matching the stone shade. |
| 63 | Providing dab stone over chhajjas duly fixed in cement sand mortar 1:6 complete:50mm thick. |
