|
| 1 | Items List |
| 2 | Earth work in EXCAVATION below ground level for depth up to less than 3.0mtrs in all kinds of works in all types of soils in any work condition irrespective of magnitude of work, work place, work space, height, degree of complications, temperature, gradient including setting out, removal of vegetation,shrubs and debris, cutting and dressing of sides in slopes, construction of shoring and bracing, leveling, grading and ramming of bottoms, dewatering up to any extent of accumulated water from any source and keeping the surface dry for subsequent works, disposal or stacking of excavated material within a lead of 2KM, shoring and strutting the excavated areas making good the over excavation with PCC 1:4:8 etc. all complete as per specifications and diretction of engineer incharge. |
| 3 | BACKFILLING and compacting the soil in layers of 300mm after execution of the WORK to proper grade and level with selected materials from available excavated soil from soil heaps within a LEAD OF 2.00KM, including re- excavating the deposited soil excavated earlier, breaking clods, watering, rolling and ramming by manual methods/ mechanical compactors, dressing, trimming etc., all complete as per standard specifications and diretction of engineer incharge. |
| 4 | TRANSPORTING & DISPOSAL of the SURPLUS EARTH AND EXCAVATED MATERIAL including shrubs and vegetations from construction area beyond initial lead of 200 mtrs to maximum lead of 2.0 KM including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, leveling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts all complete as per standard specifications and diretction of engineer incharge. (The work volume of surplus material shall be measured as the difference of volume of excavation & the volume of back filling.) |
| 5 | Providing & filling brick batsbelow grade slab or anywhere including Supply and Transportation of approved material to the work area,Cleaning of all undesired foreign material before filling, Laying in layers of maximum 300 mm, finishing to the required level and profile as per drawings, Watering and/or dewatering, complete as per standard specifications and directed by Engineer-In-Charge |
| 6 | Supplying and fillingsand in trenches or anywhere, including watering, ramming, consolidating and dressing complete as per standard specifications and diretction of engineer incharge. |
| 7 | Breaking PCC structures located at all levels without damaging other structures by mechanical or manual means including cleaning the surface to be broken of all undesired material, breaking the broken pieces in smaller size if required to facilitate easy transportation and disposal of the same, cleaning the work place of all loose broken pieces of concrete, erecting and removal of scaffolding wherever required for the work, transportation and stacking of broken pieces at the place of disposal, supply of machinery, labor etc. complete and complying with given specifications and drawing and diretction of engineer in charge. |
| 8 | Breaking RCC (including cutting and segregation of rebars) structures located at all levels without damaging other structures by mechanical or manual means including cleaning and clearing the surface to be broken of all undesired material, breaking the broken pieces in smaller size if required to facilitate easy transportation and disposal of the same, cleaning the work place of all loose broken pieces of concrete, erecting and removal of scaffolding wherever required for the work, transportation and stacking of broken pieces at the place of disposal, supply of machinery, labor etc. complete and complying with given specifications and drawing and diretction of engineer in charge |
| 9 | DismantlingMasonary located at all levels without damaging other structures by mechanical or manual means including Cleaning and clearing the surface to be broken of all undesired material, breaking the broken pieces in smaller size if required to facilitate easy transportation and disposal of the same, cleaning the work place of all loose broken pieces of concrete, erecting and removal of scaffolding wherever required for the work, transportation and stacking of broken pieces at the place of disposal, supply of machinery, labor etc. complete and complying with given specifications and drawing and diretction of engineer in charge |
| 10 | Dismantlingtile flooring, skirting & dadoing located at all levels without damaging other structures by mechanical or manual means including cleaning and clearing the surface to be broken of all undesired material, breaking the broken pieces into smaller size if required to facilitate easy transportation and disposal of the same, cleaning the work place of all loose broken pieces of concrete, erecting and removal of scaffolding wherever required for the work, transportation and stacking of broken pieces at the place of disposal, supply of machinery, labor etc. complete and complying with given specifications and drawing and diretction of engineer in charge |
| 11 | Dismantling GI Sheet, aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including erecting and removal of scaffolding wherever required for the work,disposal of unserviceable material and stacking of serviceable material within 2.00 KM lead, all complete as per specifications and diretction of engineer incharge. |
| 12 | Dismantling W.C. Pan, urinal, Wash Basin of all sizes including all attchments connected, disposal of dismantled materials i/c malba, stacking of servicable materials all complete as per specifications and diretction of engineer incharge. |
| 13 | Cutting of cylindrical holes in existing concrete, masonary using core cutters,chipping of peripherial surfaces to give them the desired profile, finishing of edges as per construction drawings, including all machinary, tools & tackles, labour etc. all complete as per specifications and diretction of engineer incharge.(75mm dia) |
| 14 | Cutting of cylindrical holes in existing concrete, masonary using core cutters,chipping of peripherial surfaces to give them the desired profile, finishing of edges as per construction drawings, including all machinary, tools & tackles, labour etc. all complete as per specifications and diretction of engineer incharge.(200mm dia) |
| 15 | Providing and laying PLAIN CEMENT CONCRETE for all depth & level, including shuttering, tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:3: by mass (1 Cement: 3 Coarse Sand: 6 Crushed Stone aggregates/Gravels) with 40mm and down size graded crushed stone aggregates / Gravels all complete as per specifications and diretction of engineer incharge. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. |
| 16 | Providingandlayinginposition reinforced cement concrete ofDesign Mix M25with OPCcement @340 kgs, with20mmanddown size graded coarse aggregates @ 0.70cumandfineaggregates @ 0.47cum,with admixures if requirred machine mixed, concrete laid in layers not exceeding 15 cms, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc., with pockets, openings, recesses, chamfering etc., wherever required, for all works in sub-structure(in any shape, position and thickness ) including costofallmaterials,labour, HOMofmachinery,complete as per shown specifications and as directed by EIC. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.(EXCLUDING THE COST OF REINFORCEMENT AND SHUTTERING) |
| 17 | Providingandlayinginposition reinforced cement concrete ofDesign Mix M25with OPCcement @340 kgs, with20mmanddown size graded coarse aggregates @ 0.70cumandfineaggregates @ 0.47cum,with admixures if requirred machine mixed, concrete laid in layers not exceeding 15 cms, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc., with pockets, openings, recesses, chamfering etc., wherever required, for all works in super structure(in any shape, position and thickness) including costofallmaterials,labour, HOMofmachinery,complete as per shown specifications and as directed by EIC. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.(EXCLUDING THE COST OF REINFORCEMENT AND SHUTTERING) |
| 18 | Providing TMT steel reinforcement of various diameters from 8 to 32 mm otherwise specifiedfor RCC works including staightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire, and anchoring to the adjoining members,or mechanical coupling whenever necessary, complete (laps. hooks, and wastage shall not be measured and paid) as per detailed designs, drawings and schedules, including preparing bar bending schedule , cost of all material, labour, HOM of machinery etc., all complete as per shown specifications and as directed by EIC |
| 19 | Providing and removing CENTERING AND SHUTTERING for sub-structure, for all depths below and upto & inclusive of plinth level including prefabrication of shuttering using Steel plates/Timber planks or Rough plywood , spraying or brushing form-release-agent on the surface of shuttering contacting with concrete , assembling, cutting, fitting, fixing, bolting, leveling, aligning, bracing, shoring, reshoring, welding, installing, scaffolding for single pour concreting, strutting, bracing, propping etc., keeping the same inposition during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, pockets, openings, anchor bolts or any other fixture, Making good the concrete surface with cement slurry where honeycombing, segregation etc. is noticed etc.,all complete as per specifications and as directed by EIC |
| 20 | Providing and removing CENTERING AND SHUTTERING for super structure, for all depths above plinth level including pre-fabrication of shuttering using Steel plates/Timber planks or Rough plywood , spraying or brushing form-release-agent on the surface of shuttering contacting with concrete , assembling, cutting, fitting, fixing, bolting, leveling, aligning, bracing, shoring, reshoring, welding, installing, scaffolding for single pour concreting, strutting, bracing, propping etc., keeping the same inposition during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, pockets, openings, anchor bolts or any other fixture, Making good the concrete surface with cement slurry where honeycombing, segregation etc. is noticed etc.,all complete as per specifications and as directed by EIC |
| 21 | Supplying, transporting, storing, fabricating in position and testing/examining bolted and/or welded STRUCTURAL STEEL WORKS at all levels and locations including all builtup sections/compound sections made out of rolled sections and/or plates/bent plates/MS Pipes/MS supports in columns, girders, beams, supports, bracings, gussets, joists, staircase, pipe hand rail for stairs, platforms, walkways, ladder, pits, connections, bolts, washers, plates, brackets etc., cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/welding of joints, (including sealing the joints of boxsections withcontinuous welding), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection,Loading, unpacking and assorting at storage area, Transportation to fabrication shop and/or working area etc.,all complete as per specifications and as directed by EIC. SUPPLY OF ALL MATERIAL IN CONTRACTOR\"S SCOPE. |
| 22 | Supply and installation of Mechanical anchor fasteners of diameters specified below for supporting new members with existing reinforced concrete floor beam/pedestal, including machinery, labour etc all complete as per specifications and as directed by EIC(diameter 12mm, length 100mm) |
| 23 | Supply and installation of chemical anchor fasteners of diameters specified below for supporting new members with existing reinforced concrete floor beam/pedestal, including machinery, labour etc all complete as per specifications and as directed by EIC.(Diameter 16mm to 24mm, length 182 to 300mm) |
| 24 | Providing and constructing laterite size stone masonry for in CementMortar 1:6 for foundation & sub-structure including cost and conveyance of materials curing, scaffolding, etc., complete as per standard specifications (I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples & Cement 45kgs/M3)and as directed by EIC.ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. |
| 25 | Providing and constructing laterite size stone masonry for in CementMortar 1:6 for superstructure including cost and conveyance of materials curing, scaffolding, etc., complete as per standard specifications (I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples & Cement 45kgs/M3)and as directed by EIC.ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. |
| 26 | Providing and laying factory made Precast concrete solid blocks of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level in Cement mortar1:6 (1 cement : 6 coarse sand)including conveyance, curing scaffolding, etc., all complete as per specifications and as directed by EIC.ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. |
| 27 | Providing plain faced cement mortar finish plaster 12 mm thick in single coatin cement mortar 1:4 (1cement : 4 fine sand by volume) on masonry, PCC/ RCC including preparation of base, finishing, curing, scaffolding if requirred, etc complete as per specifications and as directed by EIC. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. |
| 28 | Providing18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) ,and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge andfor including preparing the surface, watering and scaffolding, curing etc.complete as per standard specifications and diretction of engineer incharge.. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. |
| 29 | Providing and laying vitrified floor tiles in different sizes conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as per standard specifications and direction of engineer incharge. |
| 30 | Providing and laying Ceramic floor tiles of 1st quality conforming to IS : 15622 of approved make laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete as per standard specifications and direction of engineer incharge. |
| 31 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 32 | Supplying & aplying one coat of water thinnable cement primer of approved brand and manufacture on wall surface complete as per standard specifications and diretction of engineer incharge. |
| 33 | Supplying & aplying two coat of interior wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade complete as per standard specifications and diretction of engineer incharge. |
| 34 | Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give and even shade after thouroughly brooming the surface to remove all dirt and loose powdrered materials, free from mortar drops and other foriegn matter cost of materials,labour, complete as per specifications and as directed by Engineer In Charge |
| 35 | Providing and applying enamel metal paint two coats (excluding priming coat) over new steel surface or other metal surface brushing to give an even shade after cleaning oil, grease dirt and other foreign matter, including materials, labour, all complete as per standard specifications and direction of engineer incharge. |
| 36 | Supplying and fixing of aluminium partition using 63.50MM*38.10MM*1.2MM Aluminium sections (Jindal/Indal) fixing with pre laminated \"NOVAPAN\" board of 9mm and fixing 5mm plain glass(MODI/ASAI/SAINT/GOBIAN) fitted with EPDM rubber/neoprene gasket beading and glazing clips all aluminium sections anodises 12 to 15 microns including cutting to requirred length, stiffened with end clips for corner angles...etc with necessary steel screws, raul plugs or teak wood gatties and all other materials to complete the scope including manpowers, tools. tackles, transportation to site complete as per specification and as directed by EIC |
| 37 | Providing fabricating, assembling and fixing in position powder coated aluminim doors of approved quality using aluminim mat finish or glossy finish , outer frame plain section, aluminium sections cut to length joint metred corners grinded, with heavy duty aluminium alloy automatic door closures, providing and fixing standard approved accessories such as aluminium handle for full width or length , tower bolts, lock , pivots, PVC or rubber gasket with 10 mm thick Toughened glass for top panel , aluminium sections treated for removal of any rust and prevention of further rust formation and coated with greasy materials for non adherance of mortars or any other sticky materials, the assembled frame fitted with the corner angles , strips and fitted with screws , rawl plugs or teak wood gatties to RCC columns or masonry on sides, beams and flooring in bottom including cutting, chistling and making good with cement mortar to match the surface all the frames throguhly cleaned free from trust , scale or dirt including cost of materials , fixtures , labour & HOM complete as per specifications and as directed by EIC |
| 38 | Fixing all types of doors from servicable mterial stackedincluding shifting within 2.00 KM lead, using all the necessary fixures for fixing the door..etc., all complete as per specifications and diretction of engineer incharge. |
| 39 | Providing and fixing in position powder coated alluminum windows and louver type ventilators with shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc. installation of insect screen providing and fixing 8 mm thick Toughened glass for shutters fitted with rubber beading all aluminium sections including cutting to require lenght joints mitred subdividing the frame tenonned and rivetted in the assembled frame, stiffened with end clips for corners, angles etc and fixed to the walls with necessary steel screws , raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar complete as per specifications and as directed by EIC |
| 40 | Fixing alluminum windows and louver type ventilators from servicable stacked material with approved quality of fixtures such as aluminium handles tower bolts etc. including cutting to require lenght joints mitred subdividing the frame tenonned and rivetted in the assembled frame, stiffened with end clips for corners, angles etc and fixed to the walls with necessary steel screws , raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar complete as per specifications and as directed by EIC |
| 41 | Supplying and fixing of hydraulic door closer of approved make with all necessary fixures, manpower, materials, tools, tackles…etc, all complete as per standard specifications and as directed by EIC |
| 42 | Supplying and fixing of aluminium door lock of approved make with all necessary fixures, manpower, materials, tools, tackles…etc, all complete as per standard specifications and as directed by EIC |
| 43 | Supplying and fixing of aluminium door handle/door stopper of approved make with all necessary fixures, manpower, materials, tools, tackles…etc, all complete as per standard specifications and as directed by EIC |
| 44 | Providing and fixing of mosquito mesh shutters made out of stainless steel mosquito proof mesh complete as per specifications, requirement & as directed by EIC. |
| 45 | Providing and fixing false ceiling with perforated Gypsum boards 12mm thickness for ceilings including cost of GI strips framework fixing alluminium hangers rods 10 mm dia at 1.20 mt spacing in either direction and expandable type anchor fastener for fixing the POP sheet...etc including all material, manpower tools, tackles, transportations to site...etc all complete as per specification and as directed by EIC. |
| 46 | Fixing false ceiling with perforated Gypsum boards excluding the Gypsum board, including cost of GI strips framework, manpower tools, tackles, transportations to site...etc all complete as per specification and as directed by EIC. |
| 47 | Construction of brick masonry inspection chambers 600 x 600x450mm depth( clear inside dimension) for single pipe line in cement mortar 1:5, C.I cover with frame(light duty) 600x600mm internal dimensions, total weight of cover with frame to be not less than 38kg(weight of cover 23kg and weight of frame 15kg) RCC top slab with cement concrete M15 with 20mm and down size granite metal, foundation concrete M5 with 40mm and down size granite metal inside plastering 12mm thick with cement mortar 1:3, finish smoth with a floating coat of cement on walls and bed concrete complete as per standard design with a bed of 1:4:8,including brick walls,4\"/6\"PVC pipe entry provisions,plastering of inside walls of chamber,forming,benching,channelling,curing etc, with top RCC chamber cover of heavy duty complete as per the requirements including cost of material,cuiring labour complete as per specifications & as directed by Engineer In charge. |
| 48 | Providing and fixing wash basin of size 550 x 400mm and making good the wall and floor wherever required including cost of material, labour completeas per specifications, requirement & as directed by EIC. |
| 49 | Fixing wash basin available from servicable materials with all fittings, clamps, arrangements, cutting and making good wall and floor wherever required, excluding cost of wash basin,including all materials, machinary,labour completeas per specifications, requirement & as directed by EIC. |
| 50 | Providing wash basin brackets of approved make conforming to ISI specifications and fixing for low down cisternas per specifications, requirement & as directed by EIC. Rate includes cost of materials and conveyance to work spot |
| 51 | Providing and fixing flat back, lipped front urinal basin of 430x260x350mm including C.P brass spreaders with brass unions and GI clamps complete, cutting and making good wall and floor wherever required, including cost of material, labour complete as per specifications, requirement & as directed by EIC. |
| 52 | Fixing flat back, lipped front urinal basinavailable from servicable materials with all fittings, clamps, arrangements, cutting and making good wall and floor wherever required, excluding cost of commode, labour complete as per specifications, requirement & as directed by EIC. |
| 53 | Providing and fixing wall mounted commode European type (Pedestal type, P trap) including solid plastic seat and lid,40mm diameter flush bend with fittings and clamps, over flow arrangements with special and 25mm mosquito proof couplings, cutting and making good wall and floor wherever required, including cost of material, labour completeas per specifications, requirement & as directed by EIC. |
| 54 | Fixing wall mounted commode European type available from servicable materials with all fittings, clamps, arrangements, cutting and making good wall and floor wherever required, excluding cost of commode, labour completeas per specifications, requirement & as directed by EIC. |
| 55 | Providing & Fixing stainless steel sink of minimum size 500 x 1000 mm in kitchen platform including PVC connecting pipe up to drain point , fixing of stainless steel sink in opening provided in kitchen platform , all connections of GI supply, making good the damaged surface, chromium plated bottle trap testing etc. complete. |
| 56 | Supplying and fixing of square type steel jally for waistline as per specifications, requirement & as directed by EIC. |
| 57 | Supplying and fixing of CONCEALED FLUSH VALVE of approved make completeas per specifications, requirement & as directed by EIC. |
| 58 | Supplying and fixing of Pillar Tap of approved make,as per the requirement & as directed by EIC. |
| 59 | Supplying and fixing of angle valve of approved make, as per specifications, requirement & as directed by EIC. |
| 60 | Supplying and fixing of Health Faucet of approved make completeas per specifications, requirement & as directed by EIC. |
| 61 | Supplying and fixing of Push Cock of approved make ,complete as per specifications, requirement & as directed by EIC. |
| 62 | Providing and fixing of un plasticised PVC Connection pipe with brass union 20mm nominal bore 300mm length of PVC connection including cost of all materials, labour and HOM of equipments with all leads completeas per specifications, requirement & as directed by EIC. |
| 63 | Supplying and fixing of waste cupling of approved make, as per specifications, requirement & as directed by EIC. |
| 64 | Providing and fixing in position brass stop cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications, requirement & as directed by EIC. |
| 65 | Supplying and fixing of PVC multifloor trap for waistline for the above as per specifications, requirement & as directed by EIC. |
| 66 | Providing and laying underground, on walls/ceiling / floors, embedded in wall of following dia. approved of 4kgf/cm2 CPVC/PVC/UPVC pipe in concealed line with all materials such as elbow, bend, or any other accessory required complete as per the requirement of the site-in-charge,engineer.(All fittings to be ISI grade.) |
| 67 | 3/4\" dia CPVC pipe |
| 68 | 1 1/2\" dia CPVC pipe |
| 69 | 1 \" dia PVC pipe |
| 70 | 2 1/2 \" dia PVC pipe |
| 71 | 4\" dia PVC pipe |
| 72 | Supplying and fixing UPVC ball valve(1 1/2\" dia ) |
| 73 | Supplying and fixing PVC ball valve(2 1/2\" dia ) |
| 74 | Supply and fixing of UPVC END CAP of dia 1\" to 8\" including all chrges for labour, material, dismantling of existing line…etc., as per requirrement and as directed by EIC. |
| 75 | Providing and fixing STANDARD MIRRORincluding MIRROR & all other materials, labour etc..complete as per specifications, requirement & as directed by EIC. |
| 76 | Fixing of STANDARD MIRROR excluding MIRROR including all other materials, labour etc..complete as per specifications, requirement & as directed by EIC. |
| 77 | Providing and fixing approved quality ss towel rail of 20mm dia, 600mm length and 1.25mm thickness including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc. complete as per specifications, requirement & as directed by EIC. |
| 78 | Providing and fixingBLINDS of approved shade & quality including fixing to wall with all necessary acessaries, and making good the same, finishing etc. all complete as per specifications, requirement & as directed by EIC. |
| 79 | Providing and fixingTINT FILM of approved quality including fixing to glass with all necessary acessaries, and making good the same, finishing etc. all complete as per specifications, requirement & as directed by EIC. |
