Military Engineer Services-MES has published Repair Maintenance Of Summer Cooling Appliances And Geyser At Otm Accn And Cod Inside, Me Line, Asc , Aps And Connected Area Under Ge ( I ) Kanpur.. Submission Date for this Tender is 13-05-2022. Air Conditioner Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Apr-2022 | REVISED BOQ | BOQ | 06-05-2022 |
| 2 | 29-Apr-2022 | Corr_01 | Other | 06-05-2022 |
| 3 | 06-May-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-05-2022 |
| Sl. No. | Item Description |
| 1 | Repair, maint and making the continuity of electric supply after rectifying the defects of the ceiling fan, exhaust fan, wall fan, desert cooler, geyser, water cooler, refrigrator, ACs etc. including providioning of small pieces of electrical wire of size 0.75 to 4 Sqmm twin/three core and length not exceding 1 mtrs and all types of screws, nuts, bolts & washers as required at site complete all as specified and directed. (Note :- (i) any other accessories found unserviceable shall be replaced & paid seprately under respective items of this Sch. (ii) Contractor will collect complaint slip on daily morning from MES complaint cell and deposit the same after rectifing the defact on next day morning(iii) Complaint slip book, registers as per sample will be provided by the contractor |
| 2 | Disconnecting electrically, taking down existing ceiling/exhasut fan any type and capacity with due care, dismantling blades and removing for repair with all accessories all as spfd and directed. |
| 3 | Assembling the fan any type with blades at site and hanging on ceiling /wall refixing after getting rapaired complete with all accessories all as spfd and directed. |
| 4 | Strip opening of ceiling fan 230 volts any make /type/size for carrying out repair/greasing / oiling, re-assembling, replacing rubber reel, fixing clamp, bolts and nuts with lock pins and testingcomplete and all as specified. Note :- 1. Repairs will be measured and paid separately under respective items. |
| 5 | Rewinding of ceiling fan motor 1200/1400 mmsweep any make/size with super enamelled copper winding wire with gauge including cutting of old burnt winding. Sleeve work varnishing with `B" class insulation varnish, greasing ,connection with flexible wire of appropriate size two core copper wire upto connector block qty of copper winding wire complete and all as specified. |
| 6 | S&F in repair fan capacitor AC 440 volts 4 mfd 50HZ complete and all as specified. Make : Epcos/Usha/Havells. |
| 7 | All as per srl item No 6 here-in-before but 2.5 mfd. |
| 8 | All as per srl item No 6 here-in-before but 3.15 mfd. |
| 9 | S&F in repair ofgun metal bush suitable for any size / model / type of fans complete all as specified & directed. |
| 10 | S&F in repair alignment grinding to shaft, remetalling & finishing all as required . |
| 11 | S&F in repair ceiling fan shaft of standard size including taking out old shaft, complete and all as specified. |
| 12 | Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed by engineer-in-charge. Make : SSK cat Pt No 580/Cona cat pt no 3111 or equivalent of make: leader. |
| 13 | Strip opening of exhaust fan/air circulator/table fan/Pedestal/wall fanany size / make / sweep for carry out repair/greasing, oiling work, re-assembling, replacing rubber reel, fixing clamp, bolts and nuts with lock pins and testing after carrying out the repair, complete and all as specified. |
| 14 | Rewinding of exhaust fan/ air circulator fan/ table fan/pedestal/wall mounted fan motor any size, from 225 to 450 mm sweep with supper enamelled copper wire as required including necessary cutting of old burnt winding wire, cleaning of slots, greasing and provision of necessary threading/sleeve work and taking out connection in lead with PVC copper wire of appropriate size upto connector block complete and all as specified. |
| 15 | S&F in repair of ball bearing any No suitable forceiling fan upto 1400mm sweep complete and all as specified Make : SKF/NBC/ABC. |
| 16 | S&F in repair of ball bearing for exhaust fan/pedestal fan/air circulator/table/wall fan upto 450mm sweep complete and all as specified Make : SKF/NBC/ABC. |
| 17 | Cleaning thoroughly ceiling fans 48"/56" (1200mm / 1400mm) sweep with Kerosene Oil and spray painting with spray gun including preparation of surfaces, and writing MES No after painting at site complete all as specified & directed by Engineer-in-Charge |
| 18 | Cleaning thoroughly exhaust/wall/podestal fan 256 mm to 450 mm sweep with Kerosene Oil and spray painting with spray gun including preparation of surfaces, and writing MES No after painting at site complete all as specified & directed by Engineer-in-Charge |
| 19 | S&F in repair of fan blade set steel heavy duty suitable for exhaust/ pedestal/air circulator fan 250 to 450 mm sweep, complete (as per sample) and all as directed by Engineer-in-Charge. |
| 20 | S&F in repair of fan blade set plastic suitable for exhaust/ pedestal/air circulator fan 250 to 450 mm sweep, complete (as per sample) and all as directed by Engineer-in-Charge. |
| 21 | S&F in replacement of fan blade set steel 1200/1400mm sweep complete (as per sample) and all as directed by Engineer-in-Charge suitable for ceiling fan all as required at site. |
| 22 | S&F in replacement ofdown rod for ceiling fans made out of 15 mm diaMS pipe, medium grade duly threaded/pin complete all as per sample of size 45 Cm long. |
| 23 | All as per item No 22but of size 1 Mtrs long |
| 24 | All as per item No 22but of size 1.5 Mtrs long |
| 25 | All as per item No 22 but of size 2 Mtrs long |
| 26 | All as per item No 22 but of size 3 Mtrs long |
| 27 | All as per item No 22 but of size 4 Mtrs long |
| 28 | Disconneting & taking down ceiling fan up to 1400 mm sweep / exhaust fan up to 450mm sweep for servicing, strip opening of fan including servicing, cleaning, oiling and greasing complete at site. Re-assembling and refixing to the same/other location. Testing complete after servicing and fixing for smooth and noise free operation. |
| 29 | Supply and fixing lower and upper canopy of fans of ceiling fans of suitable size required at site as directed by Engr-in-Charge. |
| 30 | S&F in repair for 40 mm bore galvanised iron tubing medium grade fixed to walls for hanging the fan complete all as specified and directed. |
| 31 | S&F in repair for 50 mm bore galvanised iron tubing medium grade fixed to walls for hanging the fan complete all as specified and directed. |
| 32 | S&F of hook for hanging of fan on ceiling of suitable shape of mild steel flat iron with suitable size nuts, bolts & washers complete all as specified & directed. |
| 33 | M & L for providing PVC rounded 3 core 0.75 sqmm copper cable and making necessary connection complete all as specified & directed. Make : Polycab / Finolex / Havells/Plaza. |
| 34 | All as per item No 32 but copper cable of size 1.5 Sqmm. |
| 35 | All as per item No 32 but copper cable of size 2.5 Sqmm. |
| 36 | M & L in repair for taking down/out desert cooler from exsting place and removing the old paint from the body of desert coolerand applying paint external body, fan and pump with a coat of synthetic enamel grey paint , internal body with a coat of synthetic enamel black paint with brush painting at site after proper dusting cleaning and scraping old painted surface and refixing on same/other location after painting complete all as specified and directed. |
| 37 | M & L in repair of side panels of desert cooler made out of 22 SWG mild steel sheet of size not more than 0.70x0.80 mtr to match with existing cooler as per sample complete with jalli, wood wool pad , fastners painting with two coat of synthetic enamel paint over a coat of primer etc complete all as specified and directed. |
| 38 | M&L inrepair of desert cooler water tank made out of 19 SWG mild steel sheet of size not more than 0.80x0.80x0.20 mtr (approx)to match with existing cooler as per sample including front side panel opening complete with louvers, provision for selector switch, indicator lamp etc and top cover plate made of 22 SWG mild steel along with vertical angle support of suitable height and two coat of synthetic enamel paint over a coat of primer etc complete all as specified and directed. |
| 39 | Supply and fixing in repair of water lifting pump submersible type 220 -240 Volts 50 HZ as per sample complete all as specified and directed. Make : Vansal model No OASIS SX6 (Submersible ) or equivalent make as approved by GE. |
| 40 | Supply & fixing in repair of kit fan motor of desert cooler as per sample, 230 volts complete with blades, fixing legs, nuts, bolts, washers etc of complete all as specified & directed. Make : Crompton / Havells / Khaitan / Usha. |
| 41 | S&F in replacement of ready made wood wool pad size as required at site of 15 mm thickness, made out of chicken wire mesh filled with fine quality wood wool and stitched with GI wire for desert cooler of any make & size complete all as specified & directed. |
| 42 | M & L for disconnecting, dismantling, refixing and rewinding of kit fan motor upto450 mm sweep of desert coolers 230 volts AC 50 C/S with super enamelled copper conductor wire of existing gauge as original including replacement of bush -02 Nos shaft -01 No ring-01 No & clamp-04 Nos complete all as specified & directed |
| 43 | S & F in repair of desert cooler stand using angle iron (40 x 40 x 6 mm) making square type platform of min size 800 x 800mm and fixing through two angle iron piece for horizontal support and two angle iron piece for 45 degree angle vertical support into the walls of any type / height as required on site by means of required nuts, bolts, fastners, welding work etc to form a platform suitable for fixing the desert cooler of any size & type compete all as specified and directed. Note: Angle iron should be painted with a coat of red oxide primer and two coat of synthetic enamel paint.Minimum 20 cm length of the angle iron should be inserted into the wall and fixing the same through required PCC work.Cutting chases in walls required for fixing the angle iron support shall be finished with cement mortar 1:4 and surface shall be matched with existing surface by using putty, plaster of paris etc. and applying finishing coat of existing treatment shall be deemed to be included in the unit rate quoted by the contractor. |
| 44 | M&L in repair for dimentling, taking out old u/s clamp and fixing with new clamp for kit fan motor of desert cooler as per site requirement with nuts & washers complete all as spfd and directed.. |
| 45 | Disconnecting, dismantling old u/s selector switch and fixing with new selector switch as per sample all as spfd and directed. Make Anchor/Kay/Cona |
| 46 | Disconnecting, dismantling old u/s indicator lamps and replaced with new all as spfd and directed. Make Anchor/Kay/Standard |
| 47 | Dismantling old PVC Water distributor four way and refixing with new as per sample and all as spfd and directed. |
| 48 | S&F in repair of existing UNSV desert cooler blade as per sample and fix in the desert cooler and all as specified and directed by Engr-in-Charge. Make. Cromton graves. |
| 49 | M&L for disconnecting, dismantling old u/s wiring of desert cooler and replacement with new wiring of selector switches and indication lamps and other as required at site with 1.5 Sqmm single core wires all as spfd and directed. |
| 50 | Disconnecting, dismantling and taking out old u/s storage type water heater geyser of cap 25/35 Ltrs from wall for repair at site all as spfd and directed. |
| 51 | Fixing only storage type water heater geyser on wall after reapir and replacement of old unserviceable with gutties/anchor bolts or nuts & bolts and fixing the same in existing /other location complete all as specified and directed. |
| 52 | M&L for spray painting of outside surfaces of geyser with two coats of white synthetic enamel paint after preparing surface with and including writing MES No. complete all as specified and directed. |
| 53 | M&L for opening the geyser and replacement of glass wool for insulation of geyser of 25 to 50 ltrs capacity of anymake / type complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F in repair of chromium plated flexible copper connection with two brass adopter as per existing sample suitable for carrying hot / cold water, fixed one end at geyser inlet and other to outlet water supply point complete all as specified and directed. |
| 55 | S&F in repair of PVC flexible connection with two brass adopter as per existing sample suitable for carrying hot / cold water, fixed one end at geyser inlet and other to outlet water supply point complete all as specified and directed. |
| 56 | M&L for disconnecting, dismantling old u/s thermostat switch of geyser 25 to 50 ltrs capacity and replaced with new as per sample with temperature range adjustable from 25 to 90 degree centigrade, superior quality 20 Amps rating, 220 Volts AC supply as per sample complete all as specified and directed. |
| 57 | M&L for disconnecting, dismantling old u/s heating element of cap 2 KW and replaced with new and testing on completion as per sample complete all as specified and directed by Engineer-in-Charge |
| 58 | All as per item No 57 but heating element of size 1.5 KW. |
| 59 | M&L for dismantling old u/s syphon assembly of geyser 25 to 50 ltrs ltr capacity and replaced with new stainless steel syphon as per sample and all as spfd and directed/ |
| 60 | M&L for dismantling old u/s inner tank of geyser and replaced with new stainless steel inner tank suitable for 25 to 50 ltrs ltrs capacity geysers of 22 SWG and hydraulically tested at 22.5 PSI pressure maintained at 90 degree centigrade as approved complete all as specified and directed by Engineer-in-Charge. |
| 61 | M&L for single pole and neutral enclousere with a top pin, earth plug and socket copmlete with one MCB 25 Amps, 240 Volts. |
| 62 | S&F in repair of pressure release valve with inlet coupling of superior quality as approved complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F in repair of plug top 15 Amps all as spfd and directed. Make : Cona/Anchor/Havells |
| 64 | S & F in repair of indicator LED bulb square / round type complete with necessary connection wire of red & green colour all as spfd and directed. |
| 65 | Disconnecting electrically, taking down, dismantling, opening the cover of AC and taking out and servicing of window type air conditioner cap 1.5/ 2 Ton capacity including cleaning / removing all dust / mud, oiland other foreign particle from grill, filter, condenser fin, evaporator fin including opening cover, peripheries and whole body using detergent solution or chemical solution and refitting all parts and fixing the same in existing/other location complete allas specified and directed by Engr in charge. |
| 66 | Disconnecting, dismantling, opening the cover of AC and removing unserviceable / defective parts from the window AC of 1.5 / 2 Ton capacity including necessary welding with existing refrigerant pipe, supply & charging refrigerant gas and testing complete all as specified and directed. Note: (i) All spares such as sealed compressor, fan motor, relay, capacitor, over load relay shall be measured and paid separately if required under respective item of Schedule ‘A’. (ii)If any item required to make equipment functional like capillary copper pipe etc is deemed to be included in unit quoted rate. (iii)Old unserviceable hermetic sealed unit and other materials obtained from the window type AC will be accounted under Schedule of credit and same shall become the property of the Contractor |
| 67 | S&F repair of cooling coil of window type AC any cap up to 2 ton all as spfd. |
| 68 | S&F in repair of front grill of window AC suitable for 1.5/2 ton cap as per sample all as spfd and directed. |
| 69 | S&F in repair of rotary type sealed compressor of window AC 1.5/2 Ton cap as per sample all as spfd and directed. |
| 70 | S&F in repair of Air blower moter as per sample suitable for window/split type AC of 1.5/2 Ton capacity single phase as per sample all as spfd and directed. |
| 71 | S&F in repair of starting capacitor suitable for window/split AC of rating 45 - 100 Mfd as per sample all as spfd and directed. |
| 72 | S&F in repair of starting relay suitable for Window/split AC of capacity 1.5 / 2.0 Ton as per sample. |
| 73 | S&F in repair of rotary /push type selector switch suitable for window type AC of capacity 1.5 / 2.0 Ton all as spfd and directed. |
| 74 | S&F in repair of thermostat switch as per sample for window/split type AC of 1.5 /2.0 Ton capacity all as spfd. |
| 75 | S&F in repair of condenser fan blade suitable for window/split type AC of any make & capacity all as spfd and direceted. |
| 76 | M&L for minor denting work to window type air conditioners of 1.5 / 2 Ton capacity including applying spary painting with a coat of synthetic enamel paint of requried shade complete all as specified and directed by the engineer -in -charge. |
| 77 | Disconnecting electrically and opening the cover of split AC 1.5/2 ton cap inner/outer unit and servicing incluiding cleaning / removing all dust / mud, oil and other foreign particle from grill, screen filter at indoor unit and condenser fin, evaporator fin at outdoor unit using detergent solution or chemical solution complete including servicing, oiling, greasing complete air conditioner and checking of electrical connection and testing complete all as directed by Engineer-in-Charge. |
| 78 | Disconnecting, dismantling, opening the cover of AC and removing unserviceable / defective parts from the Split type AC of 1.5 / 2 Ton capacity and fixing only new spares as per model / capacity including necessary welding with existing refrigerant pipe, supply & charging refrigerant gas and testing complete all as specified and directed. Note: (i) All spares such as sealed compressor, fan motor, relay, capacitor, over load relay shall be measured and paid separately under respective item of Schedule ‘A’. (ii)If any item required to make equipment functional like capillary copper pipe etc is deemed to be included in unit quoted rate. |
| 79 | S&F in repair of sealed compressor, rotary type, of any make as per sample suitable for split type AC of 1.5/2 Ton capacity all as spfd and directed. |
| 80 | S&F in repair of Inlet / outlet control valve for outdoor / indoor unit of suitable size, of any make & any type all as spfd and directed. |
| 81 | S&F in repair of discharge grill of outdoor unit of any size and type for split AC’s all as spfd and directed. |
| 82 | Supply and fixing in repair of defective remote control hand set with "AAA" batteries for window/split type AC"s, of any model / make complete all as specified and directed. |
| 83 | Supply and fixing in repair of display indication on LCD screen assembly mounted on indoor unit (cooling unit) for split type AC’s, of any model / make complete all as specified and directed. |
| 84 | Supply and fixing of micron filter suitable for window / split type AC of 1.5 Ton capacity complete all as specified and directed. |
| 85 | Supply and fixing ofcopper tube as per existing and site requirement complete all as specified and directed. |
| 86 | Supplyand fixing ofcondenser / cooling coil for air conditioner of suitable size complete as per site requirement and as directed. |
| 87 | Disconnecting, dismantling and taking out indoor and outdoor unit of split type AC with cooling tubing and other accessories with carefully and deposited to MES store yard complete with outer/inner unit, copper tubing, drain pipe and remort all as spfd and directed. |
| 88 | M&L for fixing/installation of split AC inner/outer or both unit as received from item No 86 with all accessories and making all coonection of copper tubing/drain and electrically and testing on completion all as spfd and directed. Note : Refrigrant and other connecting items i.e copper tube/ drain pipe will be measured and paid seperately under respective item if required. |
| 89 | supply and fixing in repairof deoxidized annealed copper tube of as per sample including brazing etc. complete all as specified and directed. |
| 90 | supply and fixing in repair offoamed polythene insulating pipe of 18 mm internal dia and 8 mm wall thickness complete all as specified and directed. |
| 91 | supply and fixing in repair offoamed polythene insulating pipe of 8 mm internal dia and 7 mm wall thickness complete all as specified and directed. |
| 92 | S&F in repair of Main control circuit (PCB) for window/split type AC"s, of any model / make complete all as specified and directed. |
| 93 | S&F in repair ofPVC flexible drain pipe 15mm to 25mm dia all as spfd and directed. |
| 94 | M & L for flushing, pressurising the system, leakage testing, vacuumization and charging with refrigerant R -22 / R-134a/R-410 (suitable as per requirement) after rectifying leakage in the system vaccumising and dehydration as per standard practice including testing in all respect for window / split type air conditioner 1.5 / 2.0 TR cap at site / contractor"s workshop including any welding / repair work reqd at site complete all as specified and as directed. |
| 95 | Supply & fix in concealed or fixed on wall of rigid non-metallic PVC conduit medium grade of size 20/25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends for drain of AC all as spfd and directed. |
| 96 | Supply and charging refrigerant R-22/R134a/R410 as per type of ACs for any type of gas filling the AC/Refrigeritor/water cooler/deep freezer etc complete one time for topping up or making full qty including plugging the leakage/ welding / repair work reqd at site complete all as specified and as directed. Make : MEFRON/DUPONT |
| 97 | Disconnecting, dismantling old u/s compressor from refrigrator and replaced with new as per sample for the refrigerator of capacity 165 to 310 Ltrs including necessary welding with existing refrigerant pipe, supply & charging refrigerant gas including testing complete all as specified and directed. |
| 98 | Supply and fixing in repair of Starting relay suitable for refrigerator of any make and capacity. Make: Renutrol / Anapurna / Godrej / Whirlpool / LG. |
| 99 | Supply and fixing in repair of Thermostat suitable for refrigerator of any make and capacity.Make: Indofos / Renutrol / Anapurna / Whirlpool. |
| 100 | Supply and fixing in repair ofPVC freezer door suitable for any size and capacity of the refrigerator. |
| 101 | Supply and fixing in repair of Magnetic rubber door gasket suitable for any size and capacity of the refrigerator. |
| 102 | Supply and fixing in repair of Copper liquid line filter two way / one way of refrigrator any type/capacity. |
| 103 | Supply and fixing in repair ofOver load protector of size 1/6 HP to 1/8 HP of refrigrator any type as per site requirement. |
| 104 | Supply and fixing in repair ofCapillary tube as per site requirement of refrigrator/water cooler any type. |
| 105 | Supply and fixing in repair of Bulb of refrigrator any type as per site requirement of Make: Philips / Bajaj. |
| 106 | Supply and fixing in repair ofIce tray twist type PVC of refrigrator any type. |
| 107 | Supply and fixing in repair ofFreezer of suitable size for refrigerator with door for refrigrator any type. |
| 108 | Supply and fixing in repair of Condenser cooling coil suitable for refrigerator capacity min 165 ltr to maximum 310 ltrs. |
| 109 | Supply and fixing in repair of Vegetable basket suitable for refrigerator as per site requirement. |
| 110 | Supply and fixing in repair ofPartition jalli /glass shelf suitable for refrigerator as per site requirement. |
| 111 | Disconnecting, dismantling and taking out old u/s voltage stabilizer of cap 2 to 5 KVA and refixing the same in same/other location after repair incl all minor parts i.e wire, nut, bolt and washers etc all as spfd and directed. Note : Spare parts will be measured and paid seperately under respactive items. |
| 112 | Supply and fixing in repair ofMain relay of voltage stabilizer 3 to 5 KVA as per sample. |
| 113 | Supply and fixing in repair ofMain control circuit (PCB) of voltage stabilizer 3 to 5 KVA as per sample. |
| 114 | Supply and fixing in repair ofreplacement of sensor transformer of voltage stabilizer 3 to 5 KVA as per sample. . |
| 115 | Supply and fixing in repair of voltmeter of voltage stabilizer 3 to 5 KVA as per sample. . |
| 116 | Supply and fixing in repair of Time delay relay, 2-3 minute over / low voltage 180 Volts AC and high voltage 260 Volts AC of voltage stabilizer 1 to 5 KVA as per sample. |
| 117 | Taking out old burnt winding of transformer and re-winding the same with super enameled copper winding wire (existing size) for 3 to 5 KVA voltage stabilizers including all necessary insulating material and testing complete. |
| 118 | M & L repair for painting of voltage stabilizers with a coat of synthetic enamel paint of existing shade after proper cleaning and scraping out old painted surfaces and writing GE (I) Kanpur on voltage stabilizers in block letters with white synthetic enameled paint complete all as specified and directed by the Engineer-in-Charge. |
| 119 | Taking out water cooler of any make and type of capacity 40 / 80 / 150 ltrs from position and cleaning/serviceing the complete condenser coil and storage tank with chemical base solution and soda water including servicing, oiling of air blower motor, checking of electrical & water supply connection incl and re-fixing the same on its existing position after testing complete all as specified and directed. |
| 120 | Disconnecting, dismantling and taking out defective water cooler of any make and type of capacity 40 / 80 / 150 ltrsfor repair all as spfd and directed. |
| 121 | M&L repair for fixing/installation of water cooler any type of cap 40/ 80/ 150 ltrs and making all electrical/water connection and testing all as spfd and directed |
| 122 | S&F repairin replacement ofsealed compressor as per sample suitable for water cooler of capacity up to 40 / 80/ 150 Ltrsas per sample. |
| 123 | S&F repair in replacement of Starting capacitor 40-60 Mfd / 60-80 Mfd / 80-100 Mfd as per sample for water cooler. |
| 124 | S&F repairin replacement of Running capacitor 10-30 Mfd as per sample for water coller/ window ac/ split ac/refrigerator. |
| 125 | S&F repair in replacement of Thermostat suitable for water cooler of capacity 40 / 80 / 150 ltrs as per sample. |
| 126 | S&F repair in replacement ofStarting relay of water cooler as per compressor requirement. |
| 127 | S&F repair in replacement of Blower motor of water cooler with fan blade of capacity 1/10 to 1/35 HP as per site requirement. |
| 128 | S&F repairin replacement ofOver load protector of water cooler as per sample suitable for water coolers. |
| 129 | S&F in repair of PVC flexible pipe transparent 15 / 20 mm dia (as per sample) for water cooler. |
| 130 | S&F in repair ofPush tap long body, cast copper alloy, chromium plated suitable for water cooler of capacity up to 150 ltrs (as per sample). |
| 131 | S&F in repair of PVC float valve 15 / 20 mm dia with rod & ball for water cooler. Make: Prayag or equivalent. |
| 132 | S&F in repair of Liquid line filter one way / two way for water cooler. |
| 133 | Supply and fixing in repair of waste washing tray including PVC pipe connection of existing shape & size for water cooler as required at site complete all as specified and directed. |
| 134 | S & F in repair of condenser coil with copper tube and aluminium fins for water coolers suitable for up to 40 / 80/ 150 Ltrs capacity of any make and type complete all as specified and directed. |
| 135 | M & L repair for cutting out worn bottom and sheet base frame including mild steel legs from water coolers of any make and capacity and fixing the same with new plain galvanised iron sheet 16 SWG of existing size and new angle iron base frame and legs of existing size with and including necessary gas welding and providing nuts / bolts etc complete all as specified and directed. |
| 136 | M & L repair for minor denting work and applying a coat of spray painting to water cooler with synthetic enamel paint after proper scraping of old rusted painted surface complete all as specified and directed. |
| 137 | M & L repair for replacement of defective sealed compressor unit of 320 / 400 ltr cap deep freezer.The rates quoted by the contractor shall be inclusive of all charges like transportation fitting etc complete with necessary guarantee periodincluding checking and rectification of any leakage in system and make in functional to entire satisfaction of EIC incl oiling, greasing, gas charging and testing complete. |
| 138 | S&F repair of ceiling fan clamps for fixing with fan rod incd nut, bolt, lock pin, rubber real complete all as specified & directed. |
| 139 | M & L repair for finding out leakage with the pressure testing of the condensor / cooling unit / compressor of deep freezer 320 / 400 Ltr cap including dismantling the same for recharging and stop leakage by brizing / soldering including charging the R-134A gas (or reqd type) to required level and testing the deep freezer for the entire satisfaction of EIC. |
| 140 | M & L for Writing SM / MES No. of Summer cooling appliances including Water coolers, desert coolers, refrigerators and Air Conditioners with synthetic enamel paint of Make Asian paints Ltd. Or Stickers equivalent of approved color complete all as specified and directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
