Military Engineer Services-MES has published Repair Maintenance Of Summer Cooling Appliances At Md Offr Qtr Jco Qtr Or Qtr Under Cantt Area And Vrg Line, Cod Estate, Dad Qtrs, Offr Qtr And Connected Area Under Ge ( I ) Kanpur.. Submission Date for this Tender is 30-05-2022. Air Conditioner Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 21-Apr-2022 | date_corr | Date | 23-05-2022 |
2 | 30-Apr-2022 | REVISED BOQ | BOQ | 23-05-2022 |
3 | 11-May-2022 | Corr_03 | Other | 23-05-2022 |
4 | 23-May-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-05-2022 |
Sl. No. | Item Description |
1 | Repair, maint and making the continuity of supply after rectifying the defects of the ceiling fan, exhaust fan, wall fan, , geyser,etc. including providioning of small pieces of electrical wire of size 0.75 to 4 Sqmm twin/three core and length not exceding 1 mtrs and all types of screws, nuts, bolts & washers as required at site complete all as specified and directed. (Note :- (i) any accessories found unserviceable that shall be replaced & paid under respective items of this Sch. (ii) Contractor/ superviser of contractor will collect complaint slip on daily morning from MES complaint cell and deposit the same after rectify on next day morning(iii) Complaint slip book, registers as per sample will be provided by the contractor |
2 | Disconnecting electrically, taking down existing ceiling/exhasut fan/Fresh air fan any type and capacity with due care, dismantling bladesfor repairing f with all accessories all as spfd and directed. |
3 | Assembling the fan any type with blades at site and hanging on ceiling /wall refixing after getting rapaired complete with all accessories all as spfd and directed. |
4 | Strip opening of single phase ceiling fan 230 volts any make /type/size for carrying out repair/greasing / oiling, re-assembling, replacing rubber reel, fixing clamp, bolts and nuts with lock pins and testingcomplete and all as specified. |
5 | Rewinding of single phase ceiling fan motor 1200/1400 mmsweep any make/size with super enamelled copper winding wire with gauge including cutting of old burnt winding. Sleeve work varnishing with `B" class insulation varnish, greasing ,connection with flexible wire of appropriate size two core copper wire upto connector block qty of copper winding wire complete and all as specified. |
6 | S&F fan capacitor AC 440 volts 4 mfd 50HZ complete and all as specified. Make : Epcos/Usha/Havells. |
7 | All as per srl item No 6 here-in-before but 3.15 mfd. |
8 | Supply and fixing in replacementofgun metal bush suitable for any size / model / type of fans complete all as specified & directed. |
9 | Repairs, alignment grinding to shaft, remetalling & finishing all as required . |
10 | S&F ceiling fan shaft of standard size including taking out old shaft, complete and all as specified. |
11 | Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed by engineer-in-charge. |
12 | Strip opening of exhaust fan/air circulator/table fan/Pedestal/wall fanany size / make / sweep for carry out repair/greasing, oiling work, re-assembling, replacing rubber reel, fixing clamp, bolts and nuts with lock pins and testing after carrying out the repair, complete and all as specified. |
13 | Rewinding of exhaust fan/ air circulator fan/ table fan/pedestal/wall mounted fan motor any size, from 225 to 450 mm sweep with supper enamelled copper wire as required including necessary cutting of old burnt winding wire, cleaning of slots, greasing and provision of necessary threading/sleeve work and taking out connection in lead with PVC copper wire of appropriate size upto connector block complete and all as specified. |
14 | Replacement of ball bearing any No suitable forceiling fan upto 1400mm sweep complete and all as specified Make : SKF/NBC/ABC. |
15 | Replacement of ball bearing for exhaust fan/pedestal fan/air circulator/table/wall fan upto 450mm sweep complete and all as specified Make : SKF/NBC/ABC. |
16 | Cleaning thoroughly ceiling fans 48"/56" (1200mm / 1400mm) sweep with Kerosene Oil and spray painting with spray gun including preparation of surfaces, and writing MES No after painting at site complete all as specified & directed by Engineer-in-Charge |
17 | Cleaning thoroughly exhaust/wall/podestal fan 256 mm to 450 mm sweep with Kerosene Oil and spray painting with spray gun including preparation of surfaces, and writing MES No after painting at site complete all as specified & directed by Engineer-in-Charge |
18 | S&F in replacement of fan blade set steel heavy duty suitable for exhaust/ pedestal/air circulator fan 250 to 450 mm sweep, complete (as per sample) and all as directed by Engineer-in-Charge. |
19 | S&F in replacement of fan blade set plastic suitable for exhaust/ pedestal/air circulator fan 250 to 450 mm sweep, complete (as per sample) and all as directed by Engineer-in-Charge. |
20 | S&F in replacement of fan blade set steel 1200/1400mm sweep complete (as per sample) and all as directed by Engineer-in-Charge suitable for ceiling fan all as required at site. |
21 | S&F of ceiling fan clamps for fixing with fan rod incd nut, bolt, lock pin, rubber real complete all as specified & directed as per sample. |
22 | S&F in replacement ofdown rod for ceiling fans made out of 15 mm diaMS pipe, medium grade duly threaded/pin complete all as per sample of size 45 Cm long. |
23 | All as per item No 22but of size 1 Mtrs long |
24 | All as per item No 22but of size 1.5 Mtrs long |
25 | All as per item No 22 but of size 2 Mtrs long |
26 | All as per item No 22 but of size 3 Mtrs long |
27 | All as per item No 22 but of size 4 Mtrs long |
28 | Supply and fixing lower and upper canopy of fans of ceiling fans of suitable size required at site as directed by Engr-in-Charge. |
29 | M & L for 40 mm bore galvanised iron tubing medium grade fixed to walls for hanging the fan complete all as specified and directed. |
30 | M & L for 50 mm bore galvanised iron tubing medium grade fixed to walls for hanging the fan complete all as specified and directed. |
31 | S&F of hook for complete hanging of fan on ceiling of suitable shape of mild steel flat iron with suitable size nuts, bolts & washers complete all as specified & directed. |
32 | M & L for providing PVC rounded 3 core 1.5 sqmm copper cable and making necessary connection complete all as specified & directed. Make : Polycab / Finolex / Havells/Plaza. |
33 | All as per item No 32 but copper cable of size 2.5 Sqmm. |
34 | Disconnecting, dismantling and taking out old u/s storage type water heater geyser of cap 25/35 Ltrs from wall for repair at site all as spfd and directed. |
35 | Fixing only storage type water heater geyser on wall after reapir and replacement of old unserviceable with gutties/anchor bolts or nuts & bolts and fixing the same in existing /other location complete all as specified and directed. |
36 | M&L for spray painting of outside surfaces of geyser with two coats of white synthetic enamel paint after preparing surface with and including writing MES No. complete all as specified and directed. |
37 | M&L for opening the geyser and replacement of glass wool for insulation of geyser of 25 to 50 ltrs capacity of anymake / type complete all as specified and directed by Engineer-in-Charge. |
38 | S&F in replacement of chromium plated flexible copper connection with two brass adopter as per existing sample suitable for carrying hot / cold water, fixed one end at geyser inlet and other to outlet water supply point complete all as specified and directed. |
39 | S&F in replacement of PVC flexible connection with two brass adopter as per existing sample suitable for carrying hot / cold water, fixed one end at geyser inlet and other to outlet water supply point complete all as specified and directed. |
40 | M&L for disconnecting, dismantling old u/s thermostat switch of geyser 25 to 50 ltrs capacity and replaced with new as per sample with temperature range adjustable from 25 to 90 degree centigrade, superior quality 20 Amps rating, 220 Volts AC supply as per sample complete all as specified and directed. |
41 | M&L for disconnecting, dismantling old u/s heating element of cap 2 KW and replaced with new and testing on completion as per sample complete all as specified and directed by Engineer-in-Charge |
42 | All as per item No 56 but heating element of size 1.5 KW. |
43 | M&L for dismantling old u/s syphon assembly of geyser 25 to 50 ltrs ltr capacity and replaced with new stainless steel syphon as per sample and all as spfd and directed/ |
44 | M&L for dismantling old u/s inner tank of geyser and replaced with new stainless steel inner tank suitable for 25 to 50 ltrs ltrs capacity geysers of 22 SWG and hydraulically tested at 22.5 PSI pressure maintained at 90 degree centigrade as approved complete all as specified and directed by Engineer-in-Charge. |
45 | S&F in replacement of metal clad plug top and socket, 20 Amps, 240 Volts complete all as specified and directed by Engineer-in-Charge. |
46 | S&F in replacement of pressure release valve with inlet coupling of superior quality as approved complete all as specified and directed by Engineer-in-Charge. |
47 | S&F in replacement of plug top 15 Amps all as spfd and directed. Make : Cona/Anchor/Havells |
48 | S & F in replacement of indicator LED bulb square / round type complete with necessary connection wire of red & green colour all as spfd and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail