|
| 1 | Modular Wallpanels : Supply, Installation, testing, commissioning of Double Skin Clean Room Fire rated Wall panels 92-100 mm thick, made of 0.8 mm thick Galvanized Iron sheet (275 gsm) as per IS 277 with 60-70 micron thick powder coating, infilled with fire rated rockwool. The density of it is 150 Kg./m³;with all required accessories like C Type Floor Track, Top Channels, male female channel etc.Panel Thickness : 92-100 mm Make:Nicomac/Dyna/Synergy-Thrislington |
| 2 | Modular Ceiling panels : Supply, Installation, testing, commissioning of Double Skin Clean Room Fire rated Walkable Ceiling panels 92-100 mm thick, made of 0.8 mm thick Galvanized Iron sheet (275 gsm) as per IS 277 with 60-70 micron thick powder coating, infilled with fire rated rockwool. The density of it is 150 Kg./m³ with all required accessories like C Type Floor Track, Top Channels, male female channel etc.Panel Thickness : 92-100 mmMake:Nicomac/Dyna/Synergy-Thrislington |
| 3 | Return air Riser Panel :Supply, Installation, testing, commissioning ofDouble Skin Clean Room Return Air Riser panels 92-100 mm thick along with necessary items, made of 0.8 mm thick Galvanized Iron sheet (275 gsm) with 60-70 micron thick powder coating on one side and other side as plain GI sheetwith inbuilt return air duct up to 150 mm above the ceiling panel along with return air perforated grille, Volume control damper, G4 Filter etc.Make:Nicomac/Dyna/Synergy-Thrislington |
| 4 | Coving : Supply, Installation, testing, commissioning of Aluminium Coving R-50 with Aluminum Backing (Powder Coated)Make:Nicomac/Dyna/Synergy-Thrislington |
| 5 | Supply, Installation, testing, commissioning of 2D/ 3D CornerMake:Nicomac/Dyna/Synergy-Thrislington |
| 6 | Clean Room Door : Supply, Installation, testing, commissioning of Clean Room Doors with 2 Hr Fire Rating made up of 1.2 mm thick GI sheet, Door leaf 46 mm thick and door frame 98 mm of 1.5 mmthick G I sheet, with Rockwool as infill material with Polyester Powder Coated finish with Hardware as mentioned below, with vision glass and accessories like SS ball bearing Hinges, SS D Handle Back to Back, Dead lock Both Side Key operation, Double Clear Glazed 6mm Glass, Door Closer, Automatic Drop Seal, Door Stopper, Door Seal, Flush bolt, SS304 Kick Plate One side, panic bar with external trim device for only emergency door etcMake:Nicomac/Dyna/Synergy-Thrislington |
| 7 | Single leaf Door Size : 900 x 2100 |
| 8 | Emergency door Size : 1800 x 2100 |
| 9 | Electrostatic flooring: (AS per EN ISO 10874 classified)Electrostatic flooring: Supply and erection of Floor should be made of conductive 2 mm (as per EN ISO 24346) thick conductive PVC or equivalent with seamless joints placed on top of the grounded copper grid.the material can resist 500KG rolling loads and the static load of 20 Ton (minimum) and the material should be strong indentation resistance (EN ISO 24343-1),flexibility for skirting, strong abrasion resistance, strong chemical resistance ( EN ISO 26987) , stain, scratches resistance, Fire resistant (EN13501-1) . the flooring material should have Thermal conductivity as per EN ISO 10456. Make: LG/Gerflor |
| 10 | Hepa Filter With Housing :Supply, Installation, testing and commissioning of Ceiling mounted 16G CRCA powder coated terminal HEPA module withMini pleat HEPA Filter (H-13), gaskets, 1.2 mm thick Stainless steel perforated sheet and volume control damper. The provision for DOP/ PAO testing port shall be provided. Efficiency:- 99.95% Down to 0.05 µ, All necessary fixtures to secure the modules in false ceiling shall be part of the scope. Make : AAF/Camfil/Freudenberg |
| 11 | GSS Ducting :Supply, Installation, testing and commissioning of Site fabricated GSS ducting with zinc coating of 120GSM total on both sides as per IS 277 complete with MS supports as per site requirements, IS standards. The scope shall include turning vanes, bolts and nuts, gaskets, stiffeners,flanges/Transverse Duct connectors. All Ducting joints shall to be sealed withRoom temperature vulcanizing (RTV) Sealant including Fire Damper & Volume Control DamperMAKE:Sail/Tata/Bhusan/JindalMAKE VCD: Trox/Ruskin/CaryaireMAKE FIRE DAMPER: Trox/Ruskin/Caryaire |
| 12 | Thermal Insulation: Supply, Installation, testing and commissioning of 19 mm thick Closed cell fire retardant(FR) Cross linked Polyethylene Foam (XLPE)/ Nitrile rubber Insulation with glass cloth face pasted with suitable adhesive. The Insulation Material shallhave fire performance such that it passes Class “O” as per BS 476 Part 6 for Fire Propagation and Class \"O\" as per BS 476 Part 7 for surface spread of flame.(For Exposed duct)Make: Armacell / Kflex |
| 13 | Supply, Installation, testing and commissioning of 19 mm thick Closed cell fire retardant(FR) Cross linked Polyethylene Foam (XLPE)/ Nitrile rubber Insulation pasted with suitable adhesive. The Insulation Material shallhave fire performance such that it passes Class “O” as per BS 476 Part 6 for Fire Propagation and Class \"O\" as per BS 476 Part 7 for surface spread of flame. (For inside the building)Make: Armacell / Kflex |
| 14 | Sound attenuator :Supply, Installation, testing and commissioning of Sound attenuator consists of a baffle within the ductwork. These baffles often contain sound-absorbing materials.Make: Carryair/Dynacraft |
| 15 | Desiccant Dehumidifier : Supply, Installation, testing and commissioning of Desiccant dehumidifier comprising of a high efficiency desiccant honeycomb rotor / bed mounted on a horizontal fixed shaft arrangement, Inlet Fresh Air-filter EU-3 / 20 micron Synthetic Non-Woven media filter,Plug type process air fan with motor, Pre Cooling Coil, insulated drain pan made of 18 G SS 304 construction, Reactivation fan, Motor, Electric heater, Electrical control panel with necessary accessories.Capacity:2000 CMH Make:Bry Air/Dessica/ Munters |
| 16 | Air Handling Unit (AHU) : Supply, Installation, testing and commissioning of Floor Mounted factory fabricated Double skin Air Handling Unit (Re-Circulation Type) made out of 0.6mm thick Pre coated GI outer skin and not less than 0.6mm thick Plain GI inner skin with minimum 43 mm thick PUF insulated panel (not less than 40kg/m3) with Thermal break Aluminum profile, comprising of blower section with Plug type backward curved fan with IE-2 Motor along with VFD drive package, Vibration isolators, mixing chamber, 20 Micron (G3) fresh air filter, 10 Microns Pre filters (G4) 3 Micron Fine-Filters (F7),and provision for accommodating the chemical filter for prevention of corrosion and odour,not less than 6RD (6 rows deep), DX cooling copper coil with Aluminum fins Sandwich insulated Condensate drain pan shall be fabricated from minimum 18G stainless steel sheet (SS 304),AHU shall be mounted on anti-vibration arrangement. Capacity : 8000-9000 CFM, Static Pressure : 150 mmMake (AHU) : Flaktwood/SystemAir/EdgeTechMake (Motor) : ABB/SiemensMake (Centrifugal Fan) : Kruger/NicotraMake (Pre Filter/ Fine Filter) : AAF/Camfill/Freudenberg |
| 17 | Chemical Filter: Supply, Installation, testing and commissioning of anti-corrosive chemical filter.a)Full charge of granular media filters. b)Grey polyurethane finish. c)Painted Cold-Rolled Steel Construction.d)Non-toxic and non-hazardous. e)UL Classification for non-flammability.f)Removing odors and preventing corrosion. g)Media Consisting of the following:- Activated Alumina with Sodium Permanganate & Activated Carbon Permanganate.Make : Purafil/Circul –Aire/Alsorb |
| 18 | Outdoor unit |
| 19 | VRF Outdoor unit : Supply, Installation, testing and commissioning of Variable Refrigerant Flow type Outdoor unit with energy efficient 100% Inverter type 2 nos. compressor with VFD, Copper condenser with anti-corrosive coating, condenser fan with motor, microprocessor based controller, AHU kit etc. The system will be suitable for 415V+/- 10%, 3 Ph operation. Eco friendly Refrigerant R410A. Capacity : 14 HPMake: BlueStar/OGeneral/Mitsubishi Heavy Industries |
| 20 | Supply, Installation, testing and commissioning of air Cooled type Outdoor unit with scroll compressor, Copper condenser, condenser fan with motor, controller etc. The system will be suitable for 415V+/- 10%, 3 Ph operation. Eco friendly Refrigerant R410A/ R407C. Capacity : 5.5 TRMake: BlueStar/OGeneral/Mitsubishi Heavy Industries |
| 21 | Refrigerant Piping: Supply & Laying of Copper refrigerant piping seamless tube ( IS: 10773 / ASTM B280 /B88)with proper insulation using 13 mm thick closed cell polyethylene insulation WIHT Aluminium Foil between condensing units and AHUs including cutting, brazing, support and fixture etc required for installation of liquid line suction line. |
| 22 | Drain Piping :Supply & Laying PVC 40mm pipeline for condensate drainage water piping from the AHU till the nearest drain point. |
| 23 | Monitoring System : Supply, Installation, testing and commissioning of Temperature, Humidity and pressure monitoring system Make: Schneider/Honeywell/Ronicon |
| 24 | Magnehelic gauge : Supply, Installation, testing and commissioning of Magnehelic gauge. Make: Dwyer/Sensocon |
| 25 | Electrical Items : |
| 26 | Electrical Panel : Supply, Installation, testing and commissioning of Dust and vermin proof indoor type factory built sheet steel enclosed modular construction floor/ wall mountedcontrol panel for AHUs, Dehumidifier and Outdoor unit, suitable for operation on 415±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers etc.The panel comprising of Incomer MCCB/MCB, Outgoing MCB, overload protection, Analog/ Digital type timer, manual operational facility, internal wiring, On Off Indication Lamp, as required. Make: Legrand/Schiender/Hagger |
| 27 | Distribution board : Supply, Installation, testing and commissioning of Distribution board suitable for 240/415 volts, 10KA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections Make: L&T/ABB/Legrand |
| 28 | Power Cabling : Supply and erection of Cu. / Al. armoured power cabling (1100V gr.) with Lux, gland for connection Make: Polycab/Nicco/CCI |
| 29 | Control Cabling : Supply and erection of Cu. control cabling with PVC conduit with accessories.Make: Precision/Polycab/AKG |
| 30 | Cable Tray : Supply and erection of Perforated GI cable Trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures, using suitable sizeM.S. angle supports and including necessary fixing hardwareas required |
| 31 | Modular switch/ socket : Supplying and fixing of following modular switch/ socket on the existing modular plate & switch box including connections GI box along with modular base & cover plate for modular switches in recess, etc. as required. Make: Legrand (Myris)/Polycab (levana)/L&T |
| 32 | 3 pin 5/6 amp switch & socket outlet |
| 33 | 3/6 pin 15/16 amp switch &socket outlet |
| 34 | LED lighting fixtureSupplying and fixing of Ceiling mounting flush type square LED lighting fixture suitable for clean room operation. Efficiency will be min 95% or aboveMake: Eveready/Philips/Bajaj/Wipro |
| 35 | Capacity : 32 Watt, Size : 600 mm x 600 mm |
| 36 | Wiring |
| 37 | Supply and erection of FRLS multi-stranded copper PVC insulated 1100V gr Wire with ISI mark runs through PVC conduit for Light and Switch socket.Make: Finolex/Polycab/Bonton |
| 38 | AIR SHOWER:Supply and erection of Air ShowerInner size : 900 x 900 x 1950mm (WxDxH)Cabinet: CRCA Powder CoatedPlatform: PVC Matt FlooringView Panel doorPre-filter: 10 micronsHEPA Filters:0.3 micronAdjustable SS nozzlesMotor blowerPower supply- 3phase, 415voltsRPM- 2440Exit door & entry doorAudio visual alarm as a safety measure in case motor blower trips.Fault acknowledgement for motor blower tripperBlower/filter.: Side-mountedFlow: Vertical down and two sidesLighting Fluorescent tubesShower duration 0-120 seconds (Adjustable)Sound level: 90dbA±5%Motor Air-Velocity: 4000-4500FPMControls: Motor by DOL starter, doors by electromagnetic interlocking, OverloadProtection: By thermal relay, Shower duration: By Electronic timer, Emergency off: By push Button. Make: Klenzaids/Thermodyne/Hitech |
| 39 | AIR CURTAIN : Supply and erection of Impeller Size x Dia. mm 340X160Bearing ---- SealedMounting Position ---- HorizontalNumber Of Impellers ---- 2Air Velocity Mt./Sec. 12-15Type Of Motor ---- PSC* InductionRated(Voltage/Frequency/Phase) V/Hz/ph 230/50/1Motor Power Output H.P/Watt 0.20/150Motor Speed R.P.M. 1400Current Per Ph Amp. 1.0No. Of Motor ---- 1Duty Cycle Of Motor ---- CAO**Insulation Class BHigh Volt Leakage Test KV 1.5 Length : 3 ftMake: Almonard/AirTech |
| 40 | Validation : Validation as per ISO 14644 with HVAC qualification documents DQ / IQ / OQ / PQas per norms.a) Air velocity test b) Filter Integrity Test c) Particle Count Test d) Recovery Test e) Air Flow Pattern Test f) Light Intensity Testg) Sound Level Measurement h) Temperature and RH mapping i) Differential Pressure checking/Balancing |
| 41 | Civil works: Civil foundation,wall cutting and revamping, MS structure for AHU, Dehumidifier shade, corrugated sheet shade along with miscellaneous items. |
| 42 | SS Sterile Garment cubicle : Sterile Garment storage cabinet suitable for 6 persons cloths & shoes rackincluding UV Lights, Fan module, HEPA Filter etc. for clean room application complete in all respect Make: Hitech/Asind/Ramnath |
| 43 | Fire detection system : Supply, Installation, testing and commissioning of fire detection, fire alarm, and fire-fighting system along with optical type smoke detector. Fire panel shall be stand-alone type. Make: Bosch/ Honeywell/Edwards |
| 44 | Access Control :a) Supply, installation, testing & commissioning of operator console with system software for attendance as required. (PC will be given by the customer)- 1 No, Networked 2 Reader Controller / Reader Interface (with plastic enclosure back plate & cover), 250,000 Cardholders & 99,999 Transactions including SSI SMPS power Supply In Metal Enclosure. - 1 No,readers - 2 No\"s, EXIT request switch - 1 No, iCLASS - 2k/2 Clamshell Card- 10 No\"s, Electromagnetic lock - 1 No 12 V DC power supply unit with 5 Amp rating for the EM lock - 1 No, Supply andlaying of 8 core 1.0 sq.mm PVC insulated & sheeted, twisted pair, shielded tinned copper cable with proper saddling to be laid between network controller and card readers as well as door locks as required to complete the installation including 25 mm PVC pipe and 8 core 1.0 sq.mm PVC insulatedtinned copper cable including supply of 25mm PVC pipe etc. The system should have the capability for granting simultaneous access to 10 users with appropriate access cards.Make: Essl/Realtime/HID/Honey well |
| 45 | Hand held particle counter: Supply testing of Hand held particle counter with highly touch-screen display for straight forward sampling and setup, Easy-to-use interface guides users through the classification process, Easy generation of certification or monitoring reports Fast, simple method to upload sampling configurations to particle counter etc.Make: Particle Plus/TSI |
