|
| 1 | Earth work in excavation by Mechanical means (Hydraulic Excavator) in trenches/bulk excavation/ over areas (Exceeding 30 cms in depths ,1.50 metersin widthas well as 10 sq.m on plan)including removal of excavated earth, soil/slush etc. ,dressing of bed and sides ,dewatering(if any) of trenches till construction upto ground level is achieved and disposal of excavatedsoil as directedbythe Engineer incharge including all leads ,lifts and Carriage by mechanical means as required complete. ( For all kinds of soils / rock if any ) |
| 2 | Providing and laying stone soling tightly hand packed under foundations, footings , floors etc. including carriages of materials from source to site of work complete in all respects. |
| 3 | Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering all works upto plinth level. |
| 4 | 1:4:8( 1 cement: 4 coarse sand: 8 graded stone agg/ 40mm nominal size) crushed aggregate) |
| 5 | Providing and laying in position specified grades of reinforced cement concrete M-20 grade in walls(any thickness) including attached pilasters, buttresses, plinth and string courses, filets, beams, slabs, stairs, pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg. excluding the cost of centering, shuttering, finishing and reinforcement. All works upto roof level. |
| 6 | Reinforcement for R. C. C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars .( All work at all levels complete.) |
| 7 | Structural steel work in welded in built up sections trusses and framed work, including cutting, hoisting, fixing in position and applying of priming coat of approved steel primer complete in all respects..(All work at all levels complete.) |
| 8 | Providing and fixing M.S Round holding down bolts for trusses,300 mm to 450 mm in length and 16 mm dia includingnuts, washers , Platesand threading etc. complete.( All work at all levels complete.) |
| 9 | Providing form work including Centering ,shuttering , strutting, propping etc. using ply wood sheeting with water proofing ply board (12 mm min .thickness) and removal of the same for( All work at all levels complete.).- |
| 10 | Filling available excavated earth (excluding rock)in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 11 | Supplying, filling with river sand mixed with boulders in 20 Cm layers including watering, compacting & dressing under flooring in ground floorcomplete in all respects. |
| 12 | Brick masonry with FPS bricks of class designation 75 in super structure up to floor V level incement mortar 1:6 (1cement: 6 cement coarse sand). complete in all respects |
| 13 | Half brick masonry in 1 cement 4 finesand mortar, with first class (100A) bricks, in superstructure up to floor V level complete in all respects |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames Wrought framed and fixed in positions(Its class Deodar wood). |
| 15 | Providing and fixing 35 mm thick paneled door shutters (Ist class local Kail Wood).With 25-30mmthickOrnamentals Kail Wood panelsincluding necessary stainless Steel Butt hinges /screws etc. Design of shutter and panels as per the instructions of Engineer inchargecomplete in all respects. |
| 16 | Providing and fixing glazed shutters forwindows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws.( 35mm thick using First class kail wood ) |
| 17 | Providing and fixing paneling or paneling/ glazing in paneled or paneled & glazed shutters for windows and clerestory windows (area of opening for panel inserts excluding portion in side grooves or rebates to be measured). Paneling for paneled or paneled glazed shutters. (For Fixed Glazing ) |
| 18 | Providing and fixing 5mm thick panels of plain glass for fixed glazing panels/ shutters (only panel area to be measured) including cost of teak wood beadings of required size complete |
| 19 | Providing and fixing 40x5mm flat iron hold fasts 40cms long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embedding in cement conc. blocks 30x10x15 cms 1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone agg. 20mm nominal size). |
| 20 | Providing and fixing 35 mm thickwire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm with wire of dia .0.63 mm for doors, windows and clerestory windows including I.S.I. marked black enameled M.S. butt hinges with necessary screws( class kail wood.) |
| 21 | Providing and fixing12mm thick T&G planks made of imported wood (New zealand pine or equivalent)on wood work in false ceiling, wall/wall partitions sawn and put up in position ( budloo wood Ceiling Joists of 50 mm x 65 mmin sections placed @ 600 mm C/C both ways or as required at site).including cost of necessary adhesive &cost of nails etc.all completeupto floor 5 levelas per the directions ofEngineer-in-charge(including cost of all material, leads, lifts and carriages etc upto site of work complete).(For panelling /Ceilings/Soffits etc.) |
| 22 | Providing and fixing planed eves boarding of Ist class local kail wood (250 x 35 mm ) N/S with necessary grooves and chamfer as per detailed drawing / as per the directions of Engineer Incharge (ornamental Eaves Boarding):- |
| 23 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete uptoany pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (0.50 mmthickness ) |
| 24 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete (Ridges /Valleys etc. plain (500 - 600mm)) |
| 25 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 graded stone agg.) finished with a floating coat of neat cement including cement slurry but excl. the cost of nosing of steps etc. complete. (50mm thick with 20mm nominal size crushed stone aggregate) |
| 26 | Providing & fixing glass strips in joints of terrazzo/cement conc. floating (40mm wide and 4mm thick). |
| 27 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (300mm x450 mm ) |
| 28 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete (In all colours, shades, except White, Ivory, Fume Red Brown) |
| 29 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.(600 x600 mmm) |
| 30 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc.andedge moulding /Cornices wherever required all complete as specified and as directed by the Engineer-in-Charge.es as perthe Sampleapproved by Engineer-in-charge/ consultant( Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.) |
| 31 | 15 mm thick cement plaster on rough side of single or half brick wall in (1 cement: 6 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete). |
| 32 | 10 mm thick cement plaster on ceilings, soffits etc. in (1cement : 4 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete). |
| 33 | Providing and applying cement based wall putty of required thickness over plastered surface to prepare the surface even and smooth complete in specified areas as per specified patter. (Birla make) (including cost of all material, leads, lifts and carriages etc. upto site of work complete). |
| 34 | Extra for Providingmouldings /cornices of required design of Plaster of paris (POP) ofrequired thicknessas per specified pattern or as per the directions of engineer incharge. (including cost of all material, leads, lifts and carriages etc. upto site of work |
| 35 | Providing ,fixing and applying plaster of Paris (POP) false ceiling consisting of frame work made with 50 mm sq.M.S.Tubes of 18 Gauge thickness as main runner at 600 mm C/C both ways,suspended/supported with M.s flats 25 x4 mm from existingR.C.C Slab finished smooth to line and level including necessary supports, scaffolding etc. as requiredand also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete. includingproviding and fixing expanded metal of size5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semihydrate variety ) to the expanded metal of thickness not less than 10 mm finished smooth to line and level including necessary supports ,scaffolding etc. and Chicken Mesh of specifiedapertures ,wherever required and also including applying coat of red oxide zinc chromate primer over the M.S.frame work and suspenders complete as per the site requirements and as per the direction of Engineer Incharge. |
| 36 | Poviding and fixing ofNatural wood flooring 25mm thick imported (Pergo brand) plank design 22 00 x 220 x 14mm/3mm surface/four way bevel (of approved makeComplete as per specifications and directions of Consultant. |
| 37 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood workand wooden based surfaces complete.(including cost of all material, leads, lifts and carriages etc. upto site of work comp |
| 38 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 39 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 40 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 41 | French spirit polishing, Two or more coats on new works including a coat of wood filler complete in all respects as per the directions of engineer in charge.. |
| 42 | Making plinth protection 50mm thick of cement conc. 1:3:6 (1 cement:3 coarse sand : 6 graded stone agg 20mm nominal size) over 75mm bed of dry stone agg. 40mm nominal size well rammed and consolidation and grouted with fine sand incl. finishing the top smooth. |
| 43 | Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer Incharge/ consultant, complete as per the specifications (Brassfittings ) |
| 44 | a) Tower bolts 200mm |
| 45 | b) Tower bolts 100mm |
| 46 | (b)Sliding door bolts/Aldrops (Godrej with locks) |
| 47 | c) Handles |
| 48 | 150 mm |
| 49 | 125 mm |
| 50 | Providing andfixingWard robes600 mm deepas per approved designmade up of 19 mm thick ply board for frames, two no. shelves with double leafshuttersand 12 mm thick ply board for three no. drawers ,back having 6 mm ply board of ist class quality all of approved makelike Do near/ Century including fixing0.80 mm thick dulmicawith necessary adhesive on exposed surfaces including stainless steel hanger roads, locking arrangements of shutters and drawers, hinges, handles drawer channels of approved brandwith fancywooden beading completeas per requirements .The inside exposed surfaces shall be applied two or more coats of synthetic enamel paint with priming coat of approved brand ,all completeas per the directions/instructions of engineer inchargeincluding cost of necessaryScrews, nails etc. all complete.(Surface measurements onlyshall be recorded for payment ) |
| 51 | Note:-The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site workand all extra charges including dewatering if any during the execution of work complete in all respects. |
