Construction Of Govt. Degree College Larnoo Phase I ( Balance Portion )
Tender Value
95 Lakhs
Estimated cost
Bid Submission
25 Apr 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
larnoo → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Govt. Degree College Larnoo Phase I ( Balance Portion )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by /Mechanically means (Over Areas) foundations drains , pipes , cables etc. (not exceeding 1.5 m in width ) and for shafts , wells , cesspits and the like not exceeding 10 sqm on plan depth up to 1.5 m ncluding disposal of excavated earth up to 1 m from cutting edge disposal earth is to be leveled and neatly dressed in all kinds of soil. |
| 2 | supply and filling of earth in embankments in layers not exceeding 20 cm loose thickness including watering , rolling with vibatory road roller to attain a proctor density of 95% in lower layer and 100 % in top lyer as per technical specificationsas direcxted by engineer in charge with all leads and lifts and carriage of materila complete job. |
| 3 | sypplying including digging carryingby lorry filling River Bed Material mixed with coarse sand and round nallah shingle75 mm as per lines cross sections grade and camber including watering , consolidation in layers with 8-10 tone capacity |
| 4 | Providing and laying in position cement concrete of specified grade Of 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone agg.20 mm nominal size excluding cost of centering and Shuttering all work up to plinth level. .including all carriages involved. |
| 5 | Providing and laying in position cement concrete of specified grade Of 1:2:4 mix ( 1 cement : 2 coarsesand : 4 graded stone agg.20 mm nominal size excluding cost of centering and Shuttering all work up to plinth level but including carriage of sand/ agg. From approved sources up to site of work . |
| 6 | Centering and shuttering incld. Strutting, propping etc and removal of form work for : FOUDATIONS etc. |
| 7 | 12 mm thick cement plaster of mix 1:6 1 cement 6 fine sand including all lifts , leads and carriage complete job. |
| 8 | Chequred high density coloured factory made , polymer moulded , precast white cewment concrete with crushed stoneagg. 8-10 tone M450 grade antiskid tyiles 20 mm thick using white cement pigment interlocking 305x305 mm specification in footh path and cortyard on bed of cement mortar 1:4 |
| 9 | peroviding and laying at or near ground level factory made kerb made kerb stone of M 25 grade cement in position to the required line level and curvature jointed with cement mortar 1:3 1 cement 3 coarsee sandincluding making joints with or without coveres thickness of the joints except at sharp curve shall not to be more than 5 mm including making drainage opening wherever required complete etc. as per direction of engineer in charge at site including carriage. |
| 10 | supplying and spreading / levelling of good earth at site including royalty earth measured in stacks will be reduced by 20% for payment including all carriage involved. |
| 11 | Grassing with selection no.1 grass including watering and maintainance of the lawn for 30 days or more till the grass forms a thick lawn fire from weeds and fit for moving including supplying of good earth if needed the good earth shall be paid sepraterly. |
| 12 | P/L in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work using cement concrete as per approved design mix , including pumping of concrete to site of laying but excluding the cost of centering , shutterig , finishing and reinforcement including admixtures in recommanded proportions as per IS 9103 to accelerate retared setting of concrete improvework ability without imparingstrength and durability as per direction of engineer in charge at site including all carriage involved. |
| 13 | providing and fixing gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms vanity counters window sils facias and similar locations stair cases of required size approved shade colour and texture laid over 20 mm thick base cement mortar 1:4 1 cement 4 coarse sand joints treated with white cement mixed withmaching pigment epoxy touch ups including rubbing curing moulding and polishing to edges to give high gloss finish etc. complete at all levels granite of any colour or shade 18 mm thick as per direction of engineer in charge |
| 14 | providing edge moulding to 18 mm marbal stone counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge at site Granie work double moulding |
| 15 | steel work welded in built up section / framed work including cutting , hoisting fixing in position and applying a prming coat of approved steel primer using structural steel etc. as required in gratings frames guard bard ladderrailings brackets gates and similar works |
| 16 | steel work welded in built up section / framed work including cutting , hoisting fixing in position and applying a prming coat of approved steel primer using structural steel etc. as required in gratings frames guard bard ladderrailings brackets gates and similar works ( ORNAMENTAL WORK) |
| 17 | painting steel work with deluxe multi surface paint of required shade to give an even shade two or more coats applied @0.90 ltrs / 10 sqm over an under cost of primer applied @ 0.80 ltrs / 10 sqm of approved brand and manufacture |
AI Tender Summary
Tender Timeline
Apr 19, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 26, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender