Replacement Of Damaged Parts Of 50000 Gph X 130 Meters Headhc Pump Set ( Unit -1 ) Along With Allied Works At Cps Muthi 5-Replacement Of Damaged Parts Of 50000 Gph X 130 Meters Head X 200 Hp Hc Pump Set ( Unit -1 ) Along With Allied Works At C, Jammu-Jammu And Kashmir

Replacement Of Damaged Parts Of 50000 Gph X 130 Meters Headhc Pump Set ( Unit -1 ) Along With Allied Works At Cps Muthi 5-Replacement Of Damaged Parts Of 50000 Gph X 130 Meters Head X 200 Hp Hc Pump Set ( Unit -1 ) Along With Allied Works At Cps Muthi 5.The Job Involves Disconnecting Of All Electrical Connections And Dismantling The Induction Motor And Pumping Unit From The Base Frame With The Help Of Manual Labour, Other Tools And Tackles. Dismantling The Induction Motor And Separate The Rotor And Stator, Then Shifting The Pump And Rotor Along With Side Covers Outside Pump Room And Loading In Mechanical Transport By Means Of Hydra Crane And Manual Labour For Carriage To Workshop And Unloading There. Job Involves Repair To Side Cover Of Rotor By Way Of Fabrication / Fitting Of Ci Sleeves And Finishing Them To Bearing Size. Providing / Fitting Of 2 No. Bearings 6319On De And Nde Sides And Greasing Them Properly. Job Also Involves Repair To 50000 Gph X 130Mtrs Head Hc Pump By Complete Dismantling Of Pump And Segregating The Damaged Parts.Repairing The Pump By Way Of Replacing The Damaged Parts By Providing And Fitting Of 2 No. Bearing 6410On De And Nde. Providing And Fitting Of Impeller – 3 No Providing And Fitting Of Bearing Housing Bracket – 1 No.Providing / Fabrication / Fitting Of New Coupling Pulley Set 12’ Diaalong With Coupling Bolts Nuts And Rubber Bushes.Providing / Fitting Of Shaft Sleeves 2 No. ( Ss ) Along With Check Nuts As Per Sample. Providing And Fitting Of Glands With Studs On Both Sides Of The Pump With Nuts. Providing And Fitting Of Neck Rings, Body Bushes. Assembling Of The Pump And Shift In Mechanical Transport And Unloading At Site Along With Rotor And Sides Cover Of The Motor With The Help Of Hydra Crane And Manual Labour. Fitting Of Pump And Motor On Base Frame And Fastening The Coupling Bolts After Proper Alignment, Greasing And Providing Packing Materials. Connecting All Electricals Connections And Test The Hc Pump Set On Full Load Conditions. Job Includes Cost Of Material, Tools, Tackles, Shifting Charges, Crane Chargesand Labour Charges. Complete Job.

INR 200 /-

INR 81500.0 /-