Papanasam Block - Rgsa - 2021-2022. Construction Of Panchayat Office Buildingin Illupakorai Panchayat.
Tender Value
23.56 Lakhs
Estimated cost
Bid Submission
27 Apr 2022
0 days left
EMD
23560
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
papanasam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Papanasam Block - Rgsa - 2021-2022. Construction Of Panchayat Office Buildingin Illupakorai Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Package No: 01. Papanasam Block. Construction of Panchayat office buildingin Illupakorai Panchayat. |
| 2 | Earth work Excavation and depositing on bank with initial lead and lift in all classes of soil except hard rock requiring blasting including all labour charges etc.,complete for foundation (Below 0.30 m) |
| 3 | Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification. |
| 4 | Cement concrete 1:4:8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed. |
| 5 | Collection and supply of gravel for filling from approved quarry including cost and conveyance of all materials to site and all labour charges etc., complete.. |
| 6 | Brick work in cement mortar 1:5 mix using country bricks 83/4\"x41/4\"x21/4\" including cost and conveyance of all materials to site and all labour charges etc complete (Below Basement) |
| 7 | Brick work in cement mortar 1:5 mix using country bricks 83/4\"x41/4\"x21/4\" including cost and conveyance of all materials to site and all labour charges etc complete (Above Basement) |
| 8 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). |
| 9 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). |
| 10 | Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc,Complete complying with stanard specification. |
| 11 | Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. |
| 12 | Providing granolithic flooring with CC 1:2:4 mix 25 mm thick includingcost and conveyance of all materials to site and all labour charges etc complete |
| 13 | Paving the Floor with Vitrified tiles in CM 1:3 20mm thick includingcost and conveyance of all materials to site and all labour charges etc complete |
| 14 | Paving the Floor with Ceramic tiles 305x305x6mm thick includingcost and conveyance of all materials to site and all labour charges etc complete |
| 15 | Dadooing with glazed tiles of size 300x200x6mm includingcost and conveyance of all materials to site and all labour charges etc complete |
| 16 | Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required size |
| 17 | Finishing the top of the roof with one course of Machine PressedTiles of size 23x23x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification |
| 18 | Plastering with CM 1:3,10mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete |
| 19 | Plastering with CM 1:5,12mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete |
| 20 | White washing two coats using shell lime inculding cost and conveyance of all materials to site and all labour charges etccomplete |
| 21 | Distempering two coatsover priming coatinculding cost and conveyance of all materials to site and all labour charges etccomplete |
| 22 | Exterior emulsion two coatsover priming coatinculding cost and conveyance of all materials to site and all labour charges etccomplete |
| 23 | Fabrication and supply of mild Steel Doors, Windows, Ventilator & Jolly of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 |
| 24 | Fabrication and supply of mild Steel Doors, Windows, Ventilator & Jolly of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 |
| 25 | Fabrication and supply of mild Steel Doors, Windows, Ventilator & Jolly of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 |
| 26 | Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc (Manually operated) Upto 8 Sqm - SOR page 50 - 129 / A / a |
| 27 | Solid PVC door shutter using 19 gauge 19mm sq.tubes for styles and outer frames, 15mm MS sq tubes for top lock and bottom rails. The sheet tubes shall be covered with 5mm thick and solid PVC sheets including all charges etc., complete. |
| 28 | Fabrication and supply of steel grill gate using structural steel in all aspects as dirercted |
| 29 | Painting two coats over new iron works using ready mixed enamel paint inculding cost and conveyance of materials and all labour charges etc.,complete |
| 30 | Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) (SD 18) |
| 31 | Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3pin non interlocking wall socket with 5A flush type switch with continuous earth wireconnection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD 38) |
| 32 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD 125) |
| 33 | Supply and fixing of 1200 mm ( 48\") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mmdown rod on the existing clamp. (SD 110) |
| 34 | Supply and run of 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated SC unsheathed copper conductor of 1100 V grade in 25 mm dia GI pipe ( Class\"B\" ) suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 69) |
| 35 | Supply and fixing ofWT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for suitable for 11W CFL lamp with CFL (SD 83) |
| 36 | Supply and fixing of single box type 4\"40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting (SD 88) |
| 37 | Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing (SD 142) |
| 38 | Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T WClamps, Plug, Shoes, bend, Screws, nails etc., complete |
| 39 | PVC sintex tank including all charges etc., complete |
| 40 | Supplying & Fixing in position of European waer closet with all fittings and 10 lit capacity flushing tank of approved quality including cost and conveance of all etc., complete |
| 41 | Supplying & Fixing in position of Indian type Water closet 580x440mm of approved quality including cost and conveance of all etc., complete |
| 42 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Apr 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedApr 27, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender